In vitro degradation of poly(lactide-co-p-dioxanone)-based shape memory poly(urethane-urea)

The degradation of poly(lactide-co-p-dioxanone)-based shape memory poly(urethane-urea) (SMPU) in vitro was investigated by observing the changes of the pH value of incubation media, weight loss rate, molecular weight and scanning electron microscopy (SEM) during degradation duration of 12 weeks. Moreover, ¹H NMR was used to precisely study the degradation position by calculating the change of characteristic peaks value. The results revealed that the introduction of p-dioxanone (PDO) and -NH-(CO)- and -HN-(CO)-NH- would increase the hydrophilicity of polymer, so the degradation of SMPUs is higher than PDLLA control in the initial time, however, the degradation rate decreased in the anaphase of degradation, which can be attributed to the alkalic -NH₂ from the NH₂ and -NH-(CO), -NH-(CO)-NH-.     

Further reactions of some bis(vinylidene)diruthenium complexes

Whereas {Ru(dppm)Cp*}₂(μ-CCCC) (2) is the only product formed by deprotonation of [{Ru(dppm)Cp*}₂{μ(CCHCHC)}]⁺ with dbu, a mixture of 2 with Ru{CCCHCH(PPh₂)₂[RuCp*]}(dppm)Cp* (3) and {Cp*Ru(PPh₂CHCCH-)}₂ (4) is obtained with KOBu^t. A similar reaction with [{Ru(dppm)Cp*}₂{μ(CCMeCMeC)}]⁺ (5) gave Ru{CCCMeCH(PPh₂)₂[RuCp*]}(dppm)Cp* (6). X-ray structures of 4, 5 and 6 confirm the presence of the 1-ruthena-2,4-diphosphabicyclo[1.1.1]pentane moiety, which is likely formed by an intramolecular attack of the deprotonated dppm ligand on C(1) of the vinylidene ligand. Protonation of {Ru(dppe)Cp*}₂(μ-CCCC) (8-Ru) regenerates its precursor [{Ru(dppe)Cp*}₂{μ(CCHCHC)}]²⁺ (7-Ru). Ready oxidation of the bis(vinylidene) complex affords the cationic carbonyl [Ru(CO)(dppe)Cp*]PF₆ (9) (X-ray structure).     

Polyfluoroaromatic compounds with a NCClR group—a reactive type of polyfluoroarene

This review deals with syntheses and reactivity of polyfluoroarenes with a NCClR group (including those with RCl). The most promising and convenient methods of synthesis of these type compounds are based on co-pyrolysis reactions of low-basic polyfluoroaromatic amines with RCCl₃ type derivatives and the interaction of such amines and polyfluoroaromatic hydrazines with RCX₃ (XCl,F) compounds in the presence of AlCl₃ at moderate temperature; they have no analogues in the nonfluorinated series. Reactions with different nucleophilic reagents, the formation of electrophilic intermediates of the nitrilium cation type and reactions of the latter with aromatic and fluoroaromatic hydrocarbons, amines, and compounds with CN, C≡N and CO multiple bonds are described. It is shown that polyfluoroaromatic compounds with a NCClR group are promising precursors for syntheses of a wide range of compounds of various classes, including heterocyclic derivatives.     

Rh(II)-Cp-TsDPEN catalyzed aqueous asymmetric transfer hydrogenation of chromenones into saturated alcohol: CC and CO reduction in one step

As an efficient catalyst for asymmetric transfer hydrogenation reaction (ATH reaction) of α,β-unsaturated ketones, Rh-Cp^∗-TsDPEN (Cp^∗ = 1,2,3,4,5-pentamethylcyclopenta-1,3-diene, TsDPEN = N-(p-toluenesulfonyl)-1,2-diphenyl- ethylenediamine) shows high chemoselectivity on CO and CC reduction. In our method, both CO and CC bonds in a variety of chromenone derivatives were reduced efficiently in aqueous media, resulting in at least 98% ee and up to 99% yields in a convenient way without further purification. The product was a useful intermediate for deriving chiral chroman-4-amine, which was reported as an effective agent against hypotension and inflammatory pain by inhibiting human bradykinin B1 receptor.     

Ferrole-type compounds containing thiophenic or thiepinic rings in the 3,4-positions of the metallacycle

The new ferrole Fe₂(CO)₆[μ-η²,η⁴-(Fc)CC{C(H)C(R)S}CC(SiMe₃)] [R = SiMe₃ (1) and R = Fc (2)] and ruthenoles Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(H)}CC(Fc)] 3 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC(SCCFc)C(H)C(Fc)] 4, have been obtained from the reactions of M₃(CO)₁₂ (M = Fe, Ru) and FcCCSCCSiMe₃ through S-C bond activations and C-C coupling reactions. Thermolysis of Ru₂(CO)₆[μ₃-η²,η⁴,η³-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃}Ru(CO)₃}CC(Fc)] alone and in the presence of HCCFc, yielded the compounds Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)}CC(Fc)] 5 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)C(H)C(Fc)}CC(Fc)] 6, respectively. The crystal structures of the compounds 1, 3, 4 and 6 are reported.     

Nickel alkynyl and allenylidene complexes: Synthesis and properties

Copper-catalyzed reaction of [Cp(PPh₃)NiCl] with the terminal alkynes H-CC-C(O)R (R = O-Menthyl, NMe₂, Ph) yields the alkynyl complexes [Cp(PPh₃)Ni-CC-C(O)R]. Subsequent O-methylation with either [Me₃O]BF₄ or MeSO₃CF₃ affords cationic allenylidene complexes, [Cp(PPh₃)NiCCC(OMe)R]⁺X¯ (X = BF₄, SO₃CF₃). N-Alkylation of Cp(PPh₃)Ni-pyridylethynyl complexes likewise gives cationic allenylidene complexes. [Cp(PPh₃)Ni-CC-C(CH)₄N] adds BF₃ at nitrogen. Modification of the ligand sphere in these nickel allenylidene complexes is possible by replacing PPh₃ by PMe₃ in the alkynyl complex precursors. The first allenylidene(carbene)nickel cation, [Cp(SIMes)NCCC(OMe)NMe₂]⁺, is accessible by successive reaction of [Cp(SIMes)NiCl] with H-CC-C(O)NMe₂ and [Me₃O]BF₄. By the analogous sequence an allenylidene complex containing the chelating (diphenylphosphanyl)ethylcyclopentadienyl ligand can be prepared. DFT Calculations were carried out on the allenylidene complex cation [Cp(PPh₃)NiCCC(OMe)NMe₂]⁺ and on its precursor, the alkynyl complex [Cp(PPh₃)Ni-CC-C(O)NMe₂]. Based on the spectroscopic data and a X-ray structure analysis the bonding in the new nickel allenylidene complexes is best represented by several resonance forms, an alkynyl resonance form considerably contributing to the overall bond.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

Protonation of manganese phosphonioallenyl complexes

The addition of phosphines to the manganese allenylidene complexes Cp(CO)₂MnCCC(Ph)R (R = H, Ph) proceeds selectively at the C_α atom to result in the α-phosphonioallenyl complexes Cp(CO)₂Mn⁻-C(⁺PR₃¹)CC(Ph)R. The protonation of the latter affords the η²-(1,2)-phosphonioallenes Cp(CO)₂Mn{η²-(1,2)-HC(⁺PR₃¹)CC(Ph)R}, rather than the phosphoniovinylcarbenes Cp(CO)₂MnC(⁺PR₃¹)-HCC(Ph)R. All complexes obtained are stereochemically rigid and do not isomerize into the η²-(2,3)-phosphonioallene isomers.     

From alkenylphosphane aminoallenylidene ruthenium(II) complexes to highly unsaturated ruthenaphosphabicycloheptene complexes

The alkenylaminoallenylidene complex [Ru(η⁵-C₉H₇){CCC(NEt₂)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (2) has been prepared by the reaction of the allenylidene [Ru(η⁵-C₉H₇)(CCCPh₂){κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (1) with the ynamine MeCCNEt₂. The reaction proceeds regio- and stereoselectively, and the insertion of the ynamine takes place exclusively at the C_βC_γ bond of the unsaturated chain. The secondary allenylidene [Ru(η⁵-C₉H₇){CCC(H)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (3) is obtained, in a one-pot synthesis, from the reaction of aminoallenylidene 2 with LiBHEt₃ and subsequent treatment with silica. Moreover, the addition of an excess of NaBH₄ to a solution of the complex 2 in THF at room temperature gives exclusively the alkynyl complex [Ru(η⁵-C₉H₇){CCCH₂[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)] (5). The heating of a solution of allenylidene derivative 3 in THF at reflux gives regio- and diastereoselectively the cyclobutylidene complex [Ru(η⁵-C₉H₇) (PPh₃)][PF₆](4) through an intramolecular cycloaddition of the CC allyl and the C_αC_β bonds in the allenylidene complex 3. The structure of complex 4 has been determined by single crystal X-ray diffraction analysis.     

Quantification of the push-pull character of azo dyes and a basis for their evaluation as potential nonlinear optical materials

The push-pull characters of a large series of donor-acceptor substituted azo dyes—71 structures in all—have been quantified by the NN double bond lengths, d_NN, the ¹⁵N NMR chemical shift differences, Δδ_15N, of the two nitrogen atoms and the quotient, π^∗/π, of the occupations of the antibonding π^∗, and bonding π orbitals of this partial NN double bond. The excellent correlation of the occupation quotients with the bond lengths strongly infers that both π^∗/π and d_NN are excellent parameters for quantifying charge alternation in the push-pull chromophore and the molecular hyperpolarizability, β₀, of these compounds. By this approach, selected compounds can be appropriately considered as viable candidates for nonlinear optical (NLO) applications.     

Formation of a cyclobutenylidene by cyclo-addition of an alkynyl-ruthenium complex to a cyano(alkynyl)ethene

In contrast to the usual formal [2+2]-cycloaddition reaction, (NC)₂CC{CC(SiPrⁱ₃)}₂, containing bulky alkynyl substituents, reacts with Ru(CCPh)(PPh₃)₂Cp to give the unprecedented cyclobutenylidene complex Ru{C(CN)₂C[CC(SiPrⁱ₃)]CC(SiPrⁱ₃)CPhC}(PPh₃)Cp, formed by addition of one of the CC(SiPrⁱ₃) groups to the Ru-CCPh moiety and subsequent electronic reorganisation.     

A ruthenium(II) allenylidene complex with a 4,5-diazafluorene functional group: A new building-block for organometallic molecular assemblies

The synthesis of the new ruthenium(II) allenylidene complex [ClRu(dppe)₂CCC₁₁H₆N₂][OTf] (4) (dppe = 1,2-bis(diphenylphosphino)ethane) terminated with a 4,5-diazafluorene ligand is reported. Further coordination of that metal allenylidene to ruthenium and rhenium moieties leads to the bimetallic adducts [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(bpy)₂}][B(C₆F₅)₄]₃ (5a), [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(^tBu-bpy)₂}][PF₆]₃ (5b) and [ClRu(dppe)₂CCC₁₁H₆N₂{Re(CO)₃Cl}][OTf] (6). Their optical and electrochemical properties show that the allenylidene moiety is an attractive molecular clip for the access to larger original redox-active homo/heteronuclear multi-component supramolecular assemblies. The X-ray crystal structure of the allenylidene metal building block is also described.     

Oxidatively induced reactions of a diimine platinum(IV) tetramethyl complex

The oxidation of the Pt(IV) tetramethyl complex [ArNCHCHNAr]PtMe₄ (Ar = 2,6-Me₂C₆H₃) has been investigated in acetonitrile and dichloromethane. Cyclic voltammetry demonstrates that the irreversible oxidation of [ArNCHCHNAr]PtMe₄ occurs at a slightly less positive oxidation potential than the irreversible oxidation of the analogous Pt(II) species [ArNCHCHNAr]PtMe₂. The product distribution arising from the oxidation depends strongly on the reaction conditions and includes cationic Pt(IV) species (acetonitrile, dichloromethane solvents) and Pt(II) species (dichloromethane only). Evidence is presented that suggests that homolytic cleavage of a weakened PtC bond in is involved in the oxidatively induced reactions.     

Organometallic chemistry and catalysis on gold metal surfaces

As in transition metal complexes, CN-R ligands adsorbed on powdered gold undergo attack by amines to give putative diaminocarbene groups on the gold surface. This reaction forms the basis for the discovery of a gold metal-catalyzed reaction of CN-R, primary amines (R′NH₂) and O₂ to give carbodiimides (R′-NCN-R). An analogous reaction of CO, RNH₂, and O₂ gives isocyanates (R-NCO), which react with additional amine to give urea (RNH)₂CO products. The gold-catalyzed reaction of CN-R with secondary amines (HNR′₂) and O₂ gives mixed ureas RNH(CO)NR′₂. In another type of gold-catalyzed reaction, secondary amines HN(CH₂R)₂ react with O₂ to undergo dehydrogenation to the imine product, RCHN(CH₂R). Of special interest is the high catalytic activity of gold powder, which is otherwise well-known for its poor catalytic properties.     

The first evidence for a transient stibaallene ArSbCCR2

Dechlorofluorination of ArSb(F)-C(Cl)CR₂ (CR₂ = fluorenylidene, Ar = 2,4,6-tri-tert-butylphenyl) by tert-butyllithium afforded a 3,4-bis(fluorenylidene)-1,2-distibacyclobutane. The formation of the latter probably involves the transient stibaallene ArSbCCR₂ followed by a head-to-head dimerization via two SbC double bonds. Molecular orbital calculations at the ab initio and DFT levels support the head-to-head dimerization of ArSbCCR₂ with the formation of a 1,2-distibacyclobutane.     

Reactions of β-alkoxyvinyl trihalogenomethyl ketones with triethyl phosphite

The Perkow reaction of triethyl phosphite and β-alkoxyvinyl trihalogenomethyl ketones, which have common acyclic or cyclic structural fragment: -O-CC-C(O)CX₂Cl, yielded dienyl phosphates: -O-CC-C[OP(O)(OEt)₂]CX₂ where X = F or Cl, whereas γ-bromo-β-methoxy-α,β-unsaturated trifluoromethyl ketone CF₃C(O)CHC(OMe)CH₂Br gave diene CF₃C[OP(O)(OEt)₂]CH-C(OMe)CH₂.     

Bis(amino)allenylidene complexes by displacement of the MeO group in methoxy allenylidene complexes of chromium and tungsten. Synthesis, DFT calculations and solid-state structures of new bis(amino)allenylidene complexes

Pentacarbonyl dimethylamino(methoxy)allenylidene tungsten, [(CO)₅WCCC(OMe)NMe₂] (1b), reacts with one equivalent of primary amines, H₂NR, by selectively replacing the methoxy group to give dimethylamino(amino)allenylidene complexes, [(CO)₅WCCC(NHR)NMe₂]. When the amine is used in excess both terminal groups, OMe as well as NMe₂, are replaced by the primary amino group giving [(CO)₅WCCC(NHR)₂ ]. The NHR substituent in these complexes may be modified by deprotonation with LDA followed by alkylation. The replacement of the methoxy group in 1b by a secondary amino group, NR₂, can be achieved by a stepwise process. Addition of Li[NR₂] to the C_γ atom of 1b affords an alkynyl tungstate. Subsequent OMe⁻ elimination induced by TMS-Cl/SiO₂ yields the allenylidene complexes [(CO)₅WCCC(NR₂)NMe₂]. When bidentate diamines are used instead of monoamines both substituents, OMe and NMe₂, are replaced and allenylidene complexes are formed in which C_γ constitutes part of a 5-, 6-, or 7-membered heterocycle. The reaction of [(CO)₅CrCCC(OMe)NMe₂] (1a) with diethylene triamine affords an allenylidene complex with a heterocyclic endgroup carrying a dangling CH₂CH₂NH₂ substituent. All reactions follow a strict regioselective attack of the nucleophile at C_γ and proceed with good to excellent yields. The addition of N-H to the C_αC_β bond is not observed. By applying either one of these routes nearly any substitution pattern in bis(amino)allenylidene complex can be realized.     

Primary amine diazeniumdiolate ions of structure {RNN(O)NOR} as ambident nucleophiles

An O²-substituted primary amine diazeniumdiolate RHN-N(O)NOR′ is ionized to an anion that attacks an electrophile R″X via either of two nitrogens to form both RR″N-N(O)NOR′ and R-NN(O)-N(R″)OR′. The bidentate character of such anions should be kept in mind when planning or evaluating drug discovery efforts involving diazeniumdiolates of structure RHN-N(O)NOR′.