Controlled Self-Assembly of Metallacycle-Bridged Gold Nanoparticles for Surface-Enhanced Raman Scattering

In this work, well-defined two-dimensional metallacycles have been successfully employed for the well-controlled self-assembly of gold nanoparticles (AuNPs) into discrete clusters such as dimers, trimers, tetramers, pentamers and even hexamers at the water–oil interface for the first time. Furthermore, the modular construction of metallacycle molecules allows precise control of spacing between the gold nanoparticles. Interestingly, it was found that interparticle spacing below 5 nm created by molecular metallacycles in the resultant discrete gold nanoparticle clusters led to a strong plasmon coupling, thus inducing great field enhancement inside the gap between the NPs. More importantly, different discrete clusters with precise interparticle spacing provide a well-defined system for studying the hot-spot phenomenon in surface-enhanced Raman scattering (SERS); this revealed that the SERS effects were closely related to the interparticle spacing.     

Assembly of gold nanoparticles mediated by multifunctional fullerenes

The understanding of the interparticle interactions of nanocomposite structures assembled using molecularly capped metal nanoparticles and macromolecular mediators as building blocks is essential for exploring the fine-tunable interparticle spatial and macromolecular properties. This paper reports the results of an investigation of the chemically tunable multifunctional interactions between fullerenes (1-(4-methyl)-piperazinyl fullerene, MPF) and gold nanoparticles. The interparticle spatial properties are defined by the macromolecular and multifunctional electrostatic interactions between the negatively charged nanoparticles and the positively charged fullerenes. In addition to characterization of the morphological properties, the surface plasmon resonance band, dynamic light scattering, and surface-enhanced Raman scattering (SERS) properties of the MPF-mediated assembly and disassembly processes have been determined. The change of the optical properties depends on the pH and electrolyte concentrations. The detection of the Raman-active vibration modes (Ag(2) and Hg(8)) of C60 and the determination of their particle size dependence have demonstrated that the adsorption of MPF on the nanoparticle surface in the MPF-Au nm assembly is responsible for the SERS effect. These findings provide new insights into the delineation between the interparticle interactions and the nanostructural properties for potential applications of the nanocomposite materials in spectroscopic and optical sensors and in controlled releases.     

Control of gold nanoparticle aggregates by manipulation of interparticle interaction

The size of gold nanoparticle aggregates was controlled by manipulating the interparticle interaction. To manipulate the interparticle interaction of gold nanoparticles prepared by citrate reduction, we applied the substitutive adsorption of benzyl mercaptan on the particle surface in the absence of the cross-linking effect. Various experimental techniques such as UV-vis absorption spectroscopy, surface-enhanced Raman scattering, quasi-elastic light scattering, and zeta-potential measurement were used to characterize the nanoparticle aggregates. Our results suggest that the replacement of the trivalent citrate ions adsorbed on the nanoparticle surface with monovalent benzyl mercaptan ions should destabilize the particles, causing aggregation and hence the increase in the size of nanoparticle aggregates. These experimental results were successfully rationalized by the classical DLVO (Derjaguin-Landau-Vervey-Overbeek) theory that describes the interparticle interaction and colloidal stability in solution. Our findings suggest that the control of surface potential is crucial in the design of stable gold nanoparticle aggregates.     

Extinction coefficient of gold nanoparticles with different sizes and different capping ligands

Extinction coefficients of gold nanoparticles with core size ranging from approximately 4 to 40 nm were determined by high resolution transmission electron microscopy analysis and UV-vis absorption spectroscopic measurement. Three different types of gold nanoparticles were prepared and studied: citrate-stabilized nanoparticles in five different sizes; oleylamide-protected gold nanoparticles with a core diameter of 8 nm, and a decanethiol-protected nanoparticle with a diameter of around 4 nm. A linear relationship between the logarithms of extinction coefficients and core diameters of gold particles was found independent of the capping ligands on the particle surface and the solvents used to dissolve the nanoparticles. This linear relation may be used as a calibration curve to determine the concentration or average size of an unknown nanoparticle or nanoparticle-biomolecule conjugate sample.     

Construction of simple gold nanoparticle aggregates with controlled plasmon–plasmon interactions

We have developed a colloidal assembly for the study of plasmon–plasmon interactions between gold nanoparticles. Colloidal aggregates of controlled size and interparticle spacing were synthesized on silica nanoparticle substrates. Following the immobilization of isolated gold nanoparticles onto silica nanoparticles, the surfaces of the adsorbed gold nanoparticles were functionalized with 4-aminobenzenethiol. This molecular linker attached additional gold nanoparticles to the ‘parent' gold nanoparticle, forming small nanoparticle aggregates. The optical absorption spectrum of these clusters differed from that of gold colloid in a manner consistent with plasmon–plasmon interactions between the gold nanoparticles.     

Influence of Capping Ligands on the Self—organization of Gold Nanoparticles into Superlattices from CTAB Reverse Micelles

Gold nanoparticles with size 3-10nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent.The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM).Various capping ligands,such as alkylthiols with different chain length and shape,trioctylphosphine(TOP),and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures.It is shown that the ligands have a great influence on the selforganization of gold nanoparticles into superlattices,and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization.Self-organization of C12H25SH-capped gold nanoparticles into 1D,2D and 3D supperlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.     

Mediator-template assembly of nanoparticles

The ability to construct size- and shape-controllable architectures using nanoparticles as building blocks is essential for the exploration of nanoparticle-structured properties. This paper reports findings of an investigation of a mediator-template strategy for the size-controllable assembly of nanoparticles. This strategy explores multidentate thioether ligands as molecular mediators and tetraalkylammonium-capped gold nanoparticles (5 nm) as templates toward the preparation of size-controllable and monodispersed spherical assemblies ( approximately 20-300-nm diameters). The combination of the mediation force of the multidentate thioether and the hydrophobic force of the tetraalkylammonium template establishes the interparticle linkage and stability. The morphological properties of the spherical assemblies have been characterized using TEM, AFM, and SAXS techniques. The finding of the soft-hard nature of the nanoparticle assemblies and their interactions with contacting substrates could form the basis of a new strategy for manipulating nanoscale linkages between nanoparticle assemblies, soldering nanoelectronics, and constructing nanosensor devices. The intriguing light scattering and optical absorption properties in response to assembly, disassembly, sizing, and interparticle spacing parameters have been characterized by dynamic light scattering and spectrophotometric measurements. The discovery of the controlled disassembly into individual nanoparticles and the size regulation by a third capping component could form the basis for applications in controlled drug delivery. The fundamental basis for the mediator-template strategy as a versatile assembly technique is further discussed in terms of experimental and theoretical correlations of the morphological and optical properties.     

Biomolecule induced nanoparticle aggregation: effect of particle size on interparticle coupling

Gold nanoparticles of variable sizes have been prepared by reducing HAuCl(4) with trisodium citrate by Frens' method. It has been found that the gold particles under consideration produce well-ordered aggregates upon interaction with a biomolecule, glutathione in variable acidic pH condition and exhibit pronounced changes in their optical properties arising due to electromagnetic interaction in the close-packed assembly. The effect of nanoparticle size on the nature of aggregation as well as the variation in the optical response due to variable degree of interparticle coupling effects amongst the gold particles have been investigated. The optical properties of the gold aggregates have been accounted in the light of Maxwell-Garnett effective medium theory considering the changes in the filling factor in different aggregates produced by variable sizes of gold colloids. The aggregates have been characterized by UV-vis spectroscopy, FTIR, Raman, XRD and TEM studies. It has been observed that a new peak appearing at a longer wavelength intensifies and shifts further to the red from the original peak position depends on the particle size, concentration of glutathione and pH of the solution. On the basis of the first appearance of a clearly defined new peak at longer wavelength, a higher sensitivity of glutathione detection has been achieved with gold nanoparticles of larger dimension.     

Preparation of sterically stabilized gold nanoparticles for plasmonic applications

Plasmonic nanoparticles such as those of gold or silver have been recently investigated as a possible way to improve light absorption in thin film solar cells. Here, a simple method for the preparation of spherical plasmonic gold nanoparticles in the form of a colloidal solution is presented. The nanoparticle diameter is controlled in the range from several nm to tens of nm depending on the synthesis parameters with the size dispersion down to 14 %. The synthesis is based on thermal decomposition and reduction of the chloroauric acid in the presence of a stabilizing capping agent (surfactant) that is very slowly injected into the hot solvent. The surfactant prevents uncontrolled nanoparticle aggregation during the growth process. The nanoparticle size and shape depend on the type of the stabilizing agent. Surfactants with different lengths of the hydrocarbon chains such as Z-octa-9-decenylamine (oleylamine) with AgNO₃ and polyvinylpyrrolidone with AgNO₃ were used for the steric stabilization. Hydrodynamic diameter of the gold nanoparticles in the colloidal solution was determined by dynamic light scattering while the size of the nanoparticle metallic core was found by small-angle X-ray scattering. The UV-VIS-NIR spectrophotometer measurements revealed a plasmon resonance absorption in the 500–600 nm range. Self-assembled nanoparticle arrays on a silicon substrate were prepared by drop casting followed by spontaneous evaporation of the solvent and by a modified Langmuir-Blodgett deposition. The degree of perfection of the self-assembled arrays was analyzed by scanning electron microscopy and grazing-incidence small-angle X-ray scattering. Homogeneous close-packed hexagonal ordering of the nanoparticles stretching over large areas was evidenced. These results document the viability of the proposed nanoparticle synthesis for the preparation of high-quality plasmonic templates for thin film solar cells with enhanced power conversion efficiency, surface enhanced Raman scattering, and other applications.     

Spectroscopic characterizations of molecularly linked gold nanoparticle assemblies upon thermal treatment

The understanding of surface properties of core-shell type nanoparticles is important for exploiting the unique nanostructured catalytic properties. We report herein findings of a spectroscopic investigation of the thermal treatment of such nanoparticle assemblies. We have studied assemblies of gold nanocrystals of approximately 2 nm core sizes that are capped by alkanethiolate shells and are assembled by covalent or hydrogen-bonding linkages on a substrate as a model system. The structural evolution of the nanoparticle assemblies treated at different temperatures was probed by several spectroscopic techniques, including UV-visible, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The results show that the capping/linking shell molecules can be effectively removed to produce controllable surface and optical properties. The data further revealed that the thermally induced evolution of the surface plasmon resonance property of gold nanoparticles is dependent on the chemical nature of the linker molecule. The spectral evolution is discussed in terms of changes in particle size, interparticle distance, and dielectric medium properties, which has important implications for controlled preparation and thermal processing of core-shell nanostructured metal catalysts.     

The optically detected coherent lattice oscillations in silver and gold monolayer periodic nanoprism arrays: the effect of interparticle coupling

Using femtosecond transient spectroscopy, we studied the optically detected laser-induced coherent phonon oscillation of monolayers of periodic arrays of prismatic-shaped silver and gold nanoparticles, assembled by using the technique of nanosphere lithography. In this method, the same size of polystyrene sphere and the same vacuum conditions are used. Under these circumstances, the gold nanoprisms formed are found to have sharper tips than the corresponding silver nanoprisms. For both gold and silver nanoparticles, the surface plasmon absorption maximum is found to depend linearly on size. The coherent lattice oscillation periods are also found to depend linearly on size. However, although the observed dependence for the silver nanoparticle is found to follow the calculated dependence of a single particle on size (based on a one-dimensional standing wave model), the gold nanoparticle deviates from this model, and the deviation is found to increase with the size of the nanoparticles. This deviation can be explained by considering interparticle coupling. A simple interparticle lattice oscillating dipolar coupling model of the dimer is found to qualitatively account for both the sign and the size dependence of the deviation. The absence of this deviation in the silver nanoparticle arrays is blamed on the weak interparticle coupling due to their rounded tips and the possibility of oxidation of their surfaces.     

Preparation,stability and two-dimensional ordered arrangement of gold nanoparticles capped by surfactants with different chain lengths

Gold nanoparticles modified with C10NH2, C12NH2, C16NH2 and C18NH2 respectively have been prepared by the reverse micelle method. Nanoparticles stability and their two-dimensional (2D) ordered arrangement were studied by UV-Vis absorption spectra and LB technique. The factors, such as the chain length and the size distribution of particles, which affect the 2D ordered arrangement formation, are discussed. Experimental results show that the longer the chain length of surfactants capping the gold nanoparticles, the more stable the nanoparticles, and the more ordered 2D arrangement of gold nanoparticles.     

Interparticle interactions in glutathione mediated assembly of gold nanoparticles

The understanding of the detailed molecular interactions between (GSH) glutathione molecules in the assembly of metal nanoparticles is important for the exploitation of the biological reactivity. We report herein results of an investigation of the assembly of gold nanoparticles mediated by glutathione and the disassembly under controlled conditions. The interparticle interactions and reactivities were characterized by monitoring the evolution of the surface plasmon resonance band using the spectrophotometric method and the hydrodynamic sizes of the nanoparticle assemblies using the dynamic light scattering technique. The interparticle reactivity of glutathiones adsorbed on gold nanoparticles depends on the particle sizes and the ionic strength of the solution. Larger-sized particles were found to exhibit a higher degree of interparticle assembly than smaller-sized particles. The assembly-disassembly reversibility is shown to be highly dependent on pH and additives in the solution. The interactions of the negatively charged citrates surrounding the GSH monolayer on the particle surface were believed to produce more effective interparticle spatial and electrostatic isolation than the case of OH (-) groups surrounding the GSH monolayer. The results have provided new insights into the hydrogen-bonding character of the interparticle molecular interaction of glutathiones bound on gold nanoparticles. The fact that the interparticle hydrogen-bonding interactions in the assembly and disassembly processes can be finely tuned by pH and chemical means has implications to the exploitation of the glutathione-nanoparticle system in biological detection and biosensors.     

Solution-based direct readout surface enhanced Raman spectroscopic (SERS) detection of ultra-low levels of thiram with dogbone shaped gold nanoparticles

We report the use of two different sizes of dogbone shaped gold nanoparticles as colloidal substrates for surface enhanced Raman spectroscopy (SERS) based detection of ultra-low levels of thiram, a dithiocarbamate fungicide. We demonstrate the ability to use a solution based, direct readout SERS method as a quantitative tool for the detection of ultra-low levels of thiram. The two different sizes of dogbone shaped gold nanoparticles are synthesized by using the seed-mediated growth method and characterized by using UV-visible spectroscopy and transmission electron microscopy (TEM). The smaller dogbone shaped nanoparticles have an average size of 43 ± 13 nm. The larger dogbone shaped gold nanoparticles have an average size of 65 ± 15 nm. The nanoparticle concentration is 1.25 × 10(11) nanoparticles per mL for the smaller dogbone shaped gold nanoparticles and is 1.13 × 10(11) nanoparticles per mL for the larger dogbone shaped gold nanoparticles. Different concentrations of thiram are allowed to bind to the two different sizes of dogbone shaped gold nanoparticles and the SERS spectra are obtained. From the calibration curve, the limit of detection for thiram is 43.9 ± 6.2 nM when the smaller dogbone shaped gold nanoparticles are used as colloidal SERS substrates In the case of the larger dogbone shaped gold nanoparticles, the limit of detection for thiram is 11.8 ± 3.2 nM. The lower limit of detection obtained by using the larger dogbone shaped gold nanoparticles as colloidal substrates is due to the lightning rod effect, higher contributions from the electromagnetic enhancement effect, and larger number of surface sites for thiram to bind.     

Spatially controlled SERS patterning using photoinduced disassembly of gelated gold nanoparticle aggregates

Controlling the assembly of the nanoparticles is important because the optical properties of noble metal nanoparticles, such as the surface plasmon resonance (SPR) and surface-enhanced Raman scattering (SERS), are critically dependent on interparticle distances. Among many approaches available, light-induced disassembly is particularly attractive because it enables spatial modification of the optical properties of nanoparticle assemblies. In this study, we prepare gold nanoparticle (AuNP) aggregates in a gel matrix. Irradiation of the gelated AuNP aggregates at 532 nm leads to the disassembly of the aggregates, changing the color (SPR) from dark blue to red and extinguishing the SERS signal along the irradiated pattern, which opens the possibility of facile fabrication of spatially controlled SERS-generating microstructures. The photoinduced disassembly of the AuNP aggregates in solution is also investigated using UV-vis spectroscopy and transmission electron microscopy.     

Surface enhanced Raman scattering from layered assemblies of close-packed gold nanoparticles

A synthetic method of ordering hydrophilic gold nanoparticles into a close-packed two-dimensional array at a hexane-water interface and subsequent transferring of such structure onto a solid substrate is described. By repeating the transfer process, multilayered gold nanoparticle films are formed without need of linker molecules. Their surface enhanced Raman scattering (SERS) efficiencies are compared as a function of the number of layers. It is shown that both the number of layers and the particle size contribute to SERS phenomenon. Judging from the noticeable dependence of SERS efficiency on the nanometer scale architecture, the close-packed nanoparticle formation at an immiscible interface presents a facile route to the preparation of highly active and relatively clean SERS substrates by controlling both the particle size and the film thickness. Among the investigated samples, the gold nanoparticle film assembled with quintuple layers of 30 nm diameter particles showed the maximum SERS efficiency.     

Interparticle spacing control in the superlattices of carboxylic acid-capped gold nanoparticles by hydrogen-bonding mediation

We have demonstrated that carboxylic acid-capped gold nanoparticles were self-assembled to form two-dimensional (2D) and/or three-dimensional (3D) superlattices at an air/water interface in the presence of a bifunctional hydrogen-bonding mediator such as 4-pyridinecarboxylic acid (PyC) or trans-3-(3-pyridyl)acrylic acid (PyA). Transmission electron microscopy revealed a hexagonal close-packed arrangement of nanoparticles in the superlattice with an extension of interparticle spacing. In the 2D superlattices, larger particles produced a higher-quality assembly having long-range translational ordering. Attenuated total reflectance IR (ATR-IR) spectroscopy revealed the presence of hydrogen bonds between the mediator used and the capping agents of carboxylic acid on nanoparticle surfaces. Since the experimentally obtained interparticle separation distance agreed approximately with that obtained by the geometrical model calculations, we conclude that the hydrogen-bonding mediation controlled the interparticle spacing or structure by monomolecular incorporation between adjacent nanoparticles in the superlattices.     

High-density assembly of gold nanoparticles on multiwalled carbon nanotubes using 1-pyrenemethylamine as interlinker

In this article, we describe the formation of carbon nanotube (CNT)-gold nanoparticle composites in aqueous solution using 1-pyrenemethylamine (Py-CH2NH2) as the interlinker. The alkylamine substituent of 1-pyrenemethylamine binds to a gold nanoparticle, while the pyrene chromophore is noncovalently attached to the sidewall of a carbon nanotube via pi-pi stacking interaction. Using this strategy, gold nanoparticles with diameters of 2-4 nm can be densely assembled on the sidewalls of multiwalled carbon nanotubes. The formation of functionalized gold nanoparticles and CNT-Au nanoparticle composites was followed by UV-vis absorption and luminescence spectroscopy. After functionalization of gold nanoparticles with 1-pyrenemethylamine, the distinct absorption vibronic structure of the pyrene chromophore was greatly perturbed and its absorbance value was decreased. There was also a corresponding red shift of the surface plasmon resonance (SPR) absorption band of the gold nanoparticles after surface modification from 508 to 556 nm due to interparticle plasmon coupling. Further reduction of the pyrene chromophore absorbance was observed upon formation of the CNT-Au nanoparticle composites. The photoluminescence of 1-pyrenemethylamine was largely quenched after attaching to gold nanoparticles; formation of the CNT-Au nanoparticle composites further lowered its emission intensity. The pyrene fluoroprobe also sensed a relatively nonpolar environment after its attachment to the nanotube surface. The present approach to forming high-density deposition of gold nanoparticles on the surface of multiwalled carbon nanotubes can be extended to other molecules with similar structures such as N-(1-naphthyl)ethylenediamine and phenethylamine, demonstrating the generality of this strategy for making CNT-Au nanostructure composites.     

Array of molecularly mediated thin film assemblies of nanoparticles: correlation of vapor sensing with interparticle spatial properties

The ability to tune interparticle spatial properties of nanoparticle assemblies is essential for the design of sensing materials toward desired sensitivity and selectivity. This paper reports findings of an investigation of molecularly mediated thin film assemblies of metal nanoparticles with controllable interparticle spatial properties as a sensing array. The interparticle spatial properties are controlled by a combination of alpha,omega-difunctional alkyl mediators (X-(CH(2))(n)-X) such as alkyl dithiols, dicarboxylate acids, and alkanethiol shells capped on nanoparticles. Alkanethiolate-capped gold and gold-silver alloy nanoparticles (2-3 nm) were studied as model building blocks toward the thin film assemblies, whereas the variation of alkyl chain length manipulates the interparticle spacing. The thin films assembled on an interdigitated microelectrode array platform are characterized for determining their responses to the sorption of volatile organic compounds (VOCs). The correlation between the response sensitivity and the interparticle spacing properties revealed not only a clear dependence of the sensitivity on alkyl chain length but also the occurrence of a dramatic change of the sensitivity in a region of chain length for the alkyl mediator comparable with that of the capping alkyl chains. This finding reflects a balance between the interparticle chain-chain cohesive interdigitation and the nanostructure-vapor interaction which determines the relative change of the electrical conductivity of the inked nanoparticle thin film in response to vapor sorption. The results, along with statistical analysis of the sensor array data in terms of sensitivity and selectivity, have provided important insights into the detailed delineation between the interparticle spacing and the nanostructured sensing properties.     

pH值和阴离子对吡啶2,6-二羧酸在金纳米颗粒表面的增强拉曼散射的影响

表面增强拉曼散射(SERS)被用于检测细菌芽孢中的一种重要的标志物吡啶2,6-二羧酸(DPA)。以聚乙烯吡咯烷酮(PVP)为粘合剂,将60 nm的金粒子组装到表面打磨光滑的金电极上,制备稳定、灵敏的SERS基底。通过不同pH值下吸附在金基底上的DPA的SERS特征,考察DPA分子吸附构型发生的变化,并分析酸根离子对其吸附的影响。结果表明:在强酸条件下,DPA在Au NPs/PVP/Au基底上的SERS信号能达到最大增强;当pH值大于DPA二级解离常数时,DPA的SERS特征逐渐减弱。在DPA中引入不同酸根盐时,后者会取代纳米金表面的柠檬酸根所占的部分位点,改变Au NPs-Au基底的SERS增强性能。3种酸根吸附性能不同,所以获得的光谱强度存在差异。