Flow injection system with gas diffusion for the sequential determination of total nitrogen and phosphorus in vegetables

 A flow injection system was developed for the sequential determination of total nitrogen and phosphorus in digests of vegetables using potentiometric and spectrophotometric detection systems, respectively. A tubular ammonium selective electrode with a sensor system composed of nonactin/monactin in tris(2-ethylhexyl) phosphate was used. The selectivity limitations of this electrode were overcome by the inclusion of a gas-diffusion unit in the system that separated ammonium from the rest of the sample matrix and allowed the determination of total nitrogen and phosphorus by the partition of the sample plug between two streams. The results obtained with the developed FIA system were in good agreement with those of the reference methods. Sampling rates from 40 to 60 samples per hour and relative standard deviations below 3.5% were achieved. Received: 17 October 1996/Revised: 21 November 1996/Accepted: 27 November 1996     

Simple UV/UV-visible method for nitrogen and phosphorus measurement in wastewater

A simple UV/UV-visible method is described for the determination of global nitrogen and total phosphorus in wastewater. This method includes two steps: first, the photo-oxidation of nitrogen and phosphorus forms into nitrate and orthophosphate ions, and their quantification by UV-visible spectrophotometry. Potassium peroxodisulfate is used as oxidant. The developed system consists of on-line association of UV photo-oxidation reactor with UV-visible detector. The conversion yields vary between 80 and 100% for both nitrogen compounds (ammonium, urea, amino acids, and other N-containing compounds), and phosphorus compounds (ADP, ATP, and other P-containing compounds). The time requires for nitrogen and phosphorus forms determination is no longer than 20 min.     

Determination of total nitrogen in food by flow injection analysis (FIA) with a potentiometric differential detection system

A flow injection set-up based on potentiometric detection and gas diffusion device for the determination of total nitrogen in food is described. The detection system consisted of two ammonium-sensitive electrodes placed sequentially and each alternately operating as reference electrode. Tubular electrodes without an inner reference solution were prepared with a PVC membrane composed of nonactin in Tris (2-ethylhexyl) phosphate and potassium tetrakis (4-chlorophenyl) borate to reduce the membrane resistance. The food sample digests were inserted into the system, and the ammonium present was converted into ammonia gas. The gas diffused through a gas-permeable membrane to a buffer acceptor stream with a pH that ensured transformation to the ammonium cation, which was potentiometrically detected. Good agreement between FIA results and those provided by the reference procedure was obtained, with relative deviation errors below 5%. Using the proposed system, low reagent consumption is possible, a sampling rate of about 30 samples/h was achieved, as well as a good reproducibility for consecutive injections of the same sample (variation coefficient < 2%). Received: 8 October 1998 / Revised: 7 January 1999 / Accepted: 12 January 1999     

Determination of ammonium in Kjeldahl digests by gas-diffusion flow-injection analysis with a bulk acoustic wave-impedance sensor

A novel flow-injection analysis (FIA) system has been developed for the rapid and direct determination of ammonium in Kjeldahl digests. The method is based on diffusion of ammonia across a PTFE gas-permeable membrane from an alkaline (NaOH/EDTA) stream into a stream of diluted boric acid. The trapped ammonium in the acceptor is determined on line by a bulk acoustic wave (BAW)-impedance sensor and the signal is proportional to the ammonium concentration present in the digests. The proposed system exhibits a favorable frequency response to 5.0 x 10(-6)-4.0 x 10(-3) mol l(-1) ammonium with a detection limit of 1.0 x 10(-6) mol l(-1), and the precision was better than 1% (RSD) for 0.025-1.0 mM ammonium at a through-put of 45-50 samples h(-1). Results obtained for nitrogen determination in amino acids and for proteins determination in blood products are in good agreement with those obtained by the conventional distillation/titration method, respectively. The effects of composition of acceptor stream, cell constant of conductivity electrode, sample volume, flow rates and potential interferents on the FIA signals were discussed in detail.     

Determination of total nitrogen in food by flow injection analysis (FIA) with a potentiometric differential detection system

A flow injection set-up based on potentiometric detection and gas diffusion device for the determination of total nitrogen in food is described. The detection system consisted of two ammonium-sensitive electrodes placed sequentially and each alternately operating as reference electrode. Tubular electrodes without an inner reference solution were prepared with a PVC membrane composed of nonactin in Tris (2-ethylhexyl) phosphate and potassium tetrakis (4-chlorophenyl) borate to reduce the membrane resistance. The food sample digests were inserted into the system, and the ammonium present was converted into ammonia gas. The gas diffused through a gas-permeable membrane to a buffer acceptor stream with a pH that ensured transformation to the ammonium cation, which was potentiometrically detected. Good agreement between FIA results and those provided by the reference procedure was obtained, with relative deviation errors below 5%. Using the proposed system, low reagent consumption is possible, a sampling rate of about 30 samples/h was achieved, as well as a good reproducibility for consecutive injections of the same sample (variation coefficient < 2%).     

Simultaneous Determination of Total Nitrogen and Metal Elements in Tobaccos by High Performance Ion Chromatography

A simple method, developed primarily for simultaneous determination of total nitrogen and inorganic cations by high performance ion chromatographic (HPIC), was optimized for digestion of flue‐cured tobaccos, and compared with the traditional Kjeldahl method and atomic absorption spectrometry (AAS). Nitrogen determination by either Dumas method or Kjeldahl method is time‐consuming and tedious. Metal elements determination by either inductively coupled plasma‐mass spectrometry (ICP‐MS) or AAS may be more expensive and requires specialist equipment. The use of HPIC to simultaneous determine total nitrogen as ammonium ion and metal elements as inorganic cations after sample digestion significantly improves the speed of the analysis compared with the conventional methods. The cation‐exchange column and suppressed conductivity detector was used for determination of ammonium and inorganic cations in the presence of the elevated levels of sulfuric acid found in digested sample. The propsoed digestion method was accurate and precise, and required little investment. The determination of ammonium and inorganic cations was linear from 15 pg·L^?1 up to 25 ng·L^?1. The results obtained by the HPIC method were compared with those for the conventional methods approach for the determination of total nitrogen and metal elements. The application of the HPIC method is also demonstrated for a variety of other plant samples matrices.     

Evaluation of contributions to the uncertainty of cholesterol determination in human serum by means of gas chromatography/(quadrupole-) mass spectrometry

 The uncertainty budget of the determination of cholesterol in a reference material (freeze-dried human serum) by isotope dilution mass spectrometry (IDMS) was evaluated. Measurements were run on a GC/quadrupole MS. A nested experimental design combined with a corresponding model for the analysis of variance (ANOVA) revealed the components making up the total uncertainty of the determinations. The coefficient of variation (CV) of the sole GC/MS-step was 0.47%, while that of the sample preparation including hydrolyzation, extraction and derivatization was 0.84%. This made the in-laboratory (overall) CV 0.96%. In addition, there was a vial-to-vial effect of 1.00% probably due to both inhomogeneity of the pooled material and lack of reproducibility of the filling procedure (including freeze drying) of the supplier as well as the reconstitution prior to use in the laboratory. These contributions sum up to an overall CV of a single determination of about 1.4%. Received: 17 October 1996/Revised: 14 November 1996/Accepted: 18 November 1996     

微流池多光程土壤有效态氮磷测定方法研究

农业面源氮磷污染是当前地表水体污染主要来源,而土壤有效态氮磷测试大都依赖于流动分析仪在实验室完成,无法满足个性化土壤有效态氮磷现场测定需求。建立了一种微流池多光程的土壤有效态氮磷测定技术,通过柔性化参数设置,实现不同土壤有效态氮磷测试规范和现场测试。以广东省韶关市农业科学研究所和北京市农林科学院提供的26个样品为例进行有效态铵态氮、硝态氮和磷测定验证。实验结果表明,微流池多光程土壤有效态氮磷测定方法中有效态铵态氮、硝态氮和磷的检出限(LOD)分别为0.0086、0.0094和0.0078 mg/L,相对标准偏差(RSD)分别为0.80%、5.7%和0.90%,加标回收率在92.0%~103%,平均单样品测试时间6 min。测试过程自动化,极大地提升了土壤有效态氮磷测定效率和测试结果准确性,为农业面源污染防治提供技术支撑。     

Characterization of di(2-ethylhexyl)thiophosphoric acid by potentiometric titration and capillary zone electrophoresis

 The acidity constant of di(2-ethylhexyl) thiophosphoric acid (DEHTPA) was investigated using potentiometric measurements with a pH glass electrode. Owing to the low solubility of DEHTPA in pure water, its concentration and acidity constants were determined by linearised pH-metric titration in 16.7% ethanol. A K_a value of (2.39±0.08)×10^-4 was obtained. Quantitative determination of DEHTPA was performed by capillary zone electrophoresis (CZE) with carbonate buffer (pH 11.0) as a background electrolyte, operating at −20 kV with direct UV detection at 210 nm. The migration time was 8.97 min and the detection limit was 5 ppm. Received: 2 September 1996/Revised: 19 November 1996/Accepted: 21 November 1996     

Potentiometric determination of ammonium ions in quality control of the production of antibiotics

A simple and rapid procedure for the potentiometric determination of ammonium nitrogen in culture liquids used in the production of benzyl penicillin and chlorotetracycline was developed using an ammonium-selective electrode with a liquid membrane     

Characterisation and quantification of organic phosphorus and organic nitrogen components in aquatic systems: a review

This review provides a critical assessment of knowledge regarding the determination of organic phosphorus (OP) and organic nitrogen (ON) in aquatic systems, with an emphasis on biogeochemical considerations and analytical challenges. A general background on organic phosphorus and organic nitrogen precedes a discussion of sample collection, extraction, treatment/conditioning and preconcentration of organic phosphorus/nitrogen from sediments, including suspended particulate matter, and waters, including sediment porewaters. This is followed by sections on the determination of organic phosphorus/nitrogen components. Key techniques covered for organic phosphorus components are molecular spectrometry, atomic spectrometry and enzymatic methods. For nitrogen the focus is on the measurement of total organic nitrogen concentrations by carbon hydrogen nitrogen analysis and high temperature combustion, and organic nitrogen components by gas chromatography, high-performance liquid chromatography, gel electrophoresis, mass spectrometry, nuclear magnetic resonance spectrometry, X-ray techniques and enzymatic methods. Finally future trends and needs are discussed and recommendations made.     

The determination of nitrogen trichloride in liquid chlorine

Methods are described for the determination of nitrogen trichloride over the range of concentrations at which it exists in chlorine manufacture and handling. The methods are based on the conversion of nitrogen trichloride to ammonium chloride by hydrochloric acid and the determination of ammonium by spectrophotometry as the indophenol complex or by potentiometry with an ammonia gas-sensing electrode; higher levels of nitrogen trichloride are determined by titration. For liquid chlorine, a sample is taken in a refrigerated trap containing hydrochloric acid. After that, the chlorine is slowly evaporated at atmospheric pressure. Results of tests are given to prove the reliability of the methods.     

Rapid estimation of global sugars by UV photodegradation and UV spectrophotometry

The UV/UV method developed for the measurement of specific wastewater pollution parameters (ammonium, Kjeldahl nitrogen, total phosphorus) is adapted to the determination of sugars in fruit juices and soft drinks. The procedure is based on the UV spectrophotometric detection of by-products of UV photodegradation of carbohydrates. Time of analysis is greatly reduced by using specific pH conditions and diluted samples.     

Modified solid electrodes for stripping voltammetric determination of tin

The paper describes the determination of tin by ASV using modified thick film electrodes. Three different types of electrodes were developed: One modified with a mixture of Nafion and mercury(II)acetate, one modified with diethyldithiocarbamate (DDC) or pyrrolidinedithiocarbamate (PDC) and mercury(II)acetate, and one modified with calomel. The analyte was accumulated on the electrode surface after special electrochemical pretreatment of the modified electrode. After recording the voltammogram the electrodes were electrochemically regenerated. By virtue of their lifetime and their measurement reproducibility, we preferred the DDC and PDC modified electrodes. They can be used for months without changing their chemical characteristics. The linear range for tin determination with these electrodes is between 1 and 100 μg/L; the detection limit was calculated as 0.9 μg/L. The electrodes were applied to the direct determination of tin in different canned fruit juices without special sample pretreatment. Received: 20 December 1996 / Revised: 11 March 1997 / Accepted: 13 March 1997     

Modified solid electrodes for stripping voltammetric determination of tin

The paper describes the determination of tin by ASV using modified thick film electrodes. Three different types of electrodes were developed: One modified with a mixture of Nafion and mercury(II)acetate, one modified with diethyldithiocarbamate (DDC) or pyrrolidinedithiocarbamate (PDC) and mercury(II)acetate, and one modified with calomel. The analyte was accumulated on the electrode surface after special electrochemical pretreatment of the modified electrode. After recording the voltammogram the electrodes were electrochemically regenerated. By virtue of their lifetime and their measurement reproducibility, we preferred the DDC and PDC modified electrodes. They can be used for months without changing their chemical characteristics. The linear range for tin determination with these electrodes is between 1 and 100 μg/L; the detection limit was calculated as 0.9 μg/L. The electrodes were applied to the direct determination of tin in different canned fruit juices without special sample pretreatment. Received: 20 December 1996 / Revised: 11 March 1997 / Accepted: 13 March 1997     

Determination of copper by anodic stripping voltammetry on a glassy carbon electrode using a continuous flow system

 A successful flow-through system was developed for trace analysis of copper using DPASV with a glassy-carbon electrode. Periodical chemical regeneration of the electrode with a 1 mol/L NaOH solution increased sensitivity and precision. The method was shown to be applicable with a detection limit of 0.56 μg/L, with a determination time of less than 7 min per measurement (without deaeration time). The drawback of the system is the 10 min deaeration time. The system gave an accuracy of 0.090±0.005% for a certified reference material of low alloy steel containing 0.090±0.004% Cu. Applicability to various fresh water samples with a Cu content between 1.57 and 13.11 μg/L with an RSD<2.36% is illustrated. Received: 11 March 1996/Revised: 1 July 1996/Accepted: 4 July 1996     

Potentiometric determination of dialysate urea nitrogen

An enzymatically modified ammonium ion-selective electrode has been applied for the determination of urea in spent dialysate. The biosensor has been used in a simple flow-injection analysis (FIA) system. The system enables one to perform over 25 dialysate urea nitrogen (DUN) determinations per hour. The interferences from other components of posthemodialysis fluid were eliminated by simultaneous measurements with non-modified enzymatically ion-selective electrode. It is possible to use both the sensors in a simplified differential potentiometric system. The results of DUN determination using the biosensor/FIA system and a conventional method of urea determination were comparable. The presented analytical system can potentially find wider biomedical application in the monitoring of hemodialysis progress.     

Determination of copper by anodic stripping voltammetry on a glassy carbon electrode using a continuous flow system

 A successful flow-through system was developed for trace analysis of copper using DPASV with a glassy-carbon electrode. Periodical chemical regeneration of the electrode with a 1 mol/L NaOH solution increased sensitivity and precision. The method was shown to be applicable with a detection limit of 0.56 μg/L, with a determination time of less than 7 min per measurement (without deaeration time). The drawback of the system is the 10 min deaeration time. The system gave an accuracy of 0.090±0.005% for a certified reference material of low alloy steel containing 0.090±0.004% Cu. Applicability to various fresh water samples with a Cu content between 1.57 and 13.11 μg/L with an RSD<2.36% is illustrated. Received: 11 March 1996/Revised: 1 July 1996/Accepted: 4 July 1996     

Catalytic determination of ultra trace amounts of vanadium with detection by linear sweep voltammetry

Vanadium has a very strong catalytic effect on the bromate oxidation of gallocyanine at pH of 4.0. The oxidation product of gallocyanine exhibit a voltammetric wave at + 0.10 V vs. Ag/AgCl reference electrode in 0.10 mol/l KNO₃ medium. The linear scan voltammetric behaviour of the reaction products at HMDE has been studied and selected as the indicator component for the reaction. A detection limit of 0.05 ng/ml and calibration graph from 0.30–200.00 ng/ml vanadium were obtained. Vanadium in water and gasoline samples was determined by this method, with satisfactory results. Received: 26 September 1996 / Revised: 6 November 1996 / Accepted: 15 November 1996     

Effect of the concentrations of triphenyltin chloride and anion exchanger on the anion selectivity of a plasticized PVC membrane electrode

 Potentiometric selectivities of a plasticized poly(vinyl chloride) (PVC) membrane containing a hydrophobic quaternary ammonium salt and triphenyltin chloride (TPTCl) for several inorganic anions were evaluated by measurements of the membrane potential of a bi-ionic system (the so-called bi-ionic membrane potential). The addition of TPTCl to the plasticized PVC membrane containing a quaternary ammonium salt gave rise to selectivity patterns different from the Hofmeister anion series, which is observed for a membrane containing only the quaternary ammonium salt. The change in the selectivity pattern from the Hofmeister to the non-Hofmeister was observed under conditions where the TPTCl concentration was higher than the quaternary ammonium salt in the membrane. Response mechanisms and the selectivity of the TPTCl-based electrode are discussed with respect to the concentration dependence of TPTCl and quaternary ammonium salt in the membrane. Received: 6 July 1995/Revised: 2 February 1996/Accepted: 6 February 1996