Stabilizer specific interaction of gold nanoparticles with a thermosensitive polymer hydrogel

We report the experimental results on temperature-dependent studies of interactions between a novel biocompatible thermosensitive polymer hydrogel and different stabilizing agent capped gold nanoparticles (Au NPs) with particle size ranging from 5 to 20 nm. Stabilizing agents such as thioglycolic acid, tryptophan, and phenylalanine have been used as capping agents for Au NPs. The poly-N-isopropyl acrylamide-co-acrylic acid (pNIPAm-AAc) with 3.0 ± 0.7 μm in size was synthesized by radical polymerization of a selected mixture of N-isopropyl acrylamide (NIPAm), methylene-bis-acrylamide and acrylic acid (AAc). The capped Au NPs were mixed with a solution of pNIPAm-AAc hydrogel. The temperature-dependent properties of the mixture were studied by UV–vis spectroscopy, dynamic light scattering based particle size analysis, and transmission electron microscopy (TEM). The observations indicated change in the lower critical solution temperature (LCST) depending on the nature of the stabilizer, with hydrophobic ones lowering the value while hydrophilic stabilizers increasing the same. Also, the optical absorption due to Au NPs, when stabilized with hydrophobic groups, reduced significantly at above LCST along with significant blue shift of wavelength maximum.     

An insight into the effect of composition for enhance catalytic performance of biogenic Au/Ag bimetallic nanoparticles

A comprehensive knowledge of composition‐activity property relationship of nanoparticulate materials is highly desirable for applications in various catalysis reactions. We have addressed a facile green aqueous approach for preparation of Au, Ag monometallic, Au/Ag alloy as well as core‐shell bimetallic nanoparticles. The phytochemicals present in lemon grass leaves extract were employed both as natural reducing and capping agents at room temperature. X‐ray diffraction pattern, UV‐Vis spectroscopy, and energy dispersive X‐ray studies confirmed the formation of bimetallic system. The ensuing Au core/Ag shell and Au/Ag alloy bimetallic nanoparticles were crystalline and spherical in nature with identical average diameter of ~ 18 nm as measured via transmission electron microscopy. The bimetallic systems incredibly display higher catalytic potential than their monometallic counterparts which were vividly reckoned on structural effect, lattice compression, and synergistic electronic effect.     

CdSe &; ZnS core/shell nanoparticles generated by laser ablation of microparticles

Laser Ablation of Microparticles (LAM) is a process of nanoparticle formation in which microparticles in a flowing aerosol are continuously ablated by high-power laser pulses. For the first time, we have produced CdSe/ZnS core/shell nanoparticles using a double ablation apparatus, designed to undergo a two-step LAM process. This process can be inverted to produce ZnS/CdSe core/shell nanoparticles. The present work focuses on the range around ∼15 nm radius heterostructures and uses high-resolution transmission electron microscopy (HRTEM) to image core and shells. For smaller particles, core shell structures have been detected with energy dispersive spectroscopy (EDS) 5 nm spot size beam and fast Fourier transform (FFT) spectra. Differences in the ablation behavior were measured between the two IIB–VIA type semiconductors.     

Fabrication of magnetic gold nanorod particles for immunomagnetic separation and SERS application

The preparation and application of rod-shaped core–shell structured Fe₃O₄–Au nanoparticles for immunomagnetic separation and sensing were described for the first time with this study. To synthesize magnetic gold nanorod particles, the seed-mediated synthetic method was carried out and the resulting nanoparticles were characterized with transmission electron microscopy (TEM), ultraviolet visible spectroscopy (UV–Vis), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD). Magnetic properties of the nanoparticles were also examined. Characterization of the magnetic gold nanorod particles has proven that the resulting nanoparticles were composed of Fe₃O₄ core and the gold shell. The rod-shaped gold-coated iron nanoparticles have an average diameter of 16 ± 2 nm and an average length of about 50 ± 5 nm (corresponding aspect ratio of 3). The saturation magnetization value for the magnetic gold nanorod particles was found to be 37 emu/g at 300 K. Rapid and room temperature reaction synthesis of magnetic gold nanorod particles and subsequent surface modification with E. coli antibodies provide immunomagnetic separation and SERS application. The analytical performance of the SERS-based homogenous sandwich immunoassay system with respect to linear range, detection limit, and response time is also presented.     

One-pot synthesis and characterization of rhodamine derivative-loaded magnetic core–shell nanoparticles

A new method to produce elaborate nanostructure with magnetic and fluorescent properties in one entity is reported in this article. Magnetite (Fe₃O₄) coated with fluorescent silica (SiO₂) shell was produced through the one-pot reaction, in which one reactor was utilized to realize the synthesis of superparamagnetic core of Fe₃O₄, the formation of SiO₂ coating through the condensation and polymerization of tetraethylorthosilicate (TEOS), and the encapsulation of tetramethyl rhodamine isothiocyanate-dextran (TRITC-dextran) within silica shell. Transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and X-ray diffraction (XRD) were carried out to investigate the core–shell structure. The magnetic core of the core–shell nanoparticles is 60 ± 10 nm in diameter. The thickness of the fluorescent SiO₂ shell is estimated at 15 ± 5 nm. In addition, the fluorescent signal of the SiO₂ shell has been detected by the laser confocal scanning microscopy (LCSM) with emission wavelength (λ_em) at 566 nm. In addition, the magnetic properties of TRITC-dextran loaded silica-coating iron oxide nanoparticles (Fe₃O₄@SiO₂ NPs) were studied. The hysteresis loop of the core–shell NPs measured at room temperature shows that the saturation magnetization (M _s) is not reached even at the field of 70 kOe (7T). Meanwhile, the very low coercivity (H _c) and remanent magnetization (M _r) are 0.375 kOe and 6.6 emu/g, respectively, at room temperature. It indicates that the core–shell particles have the superparamagnetic properties. The measured blocking temperature (T _B) of the TRITC-dextran loaded Fe₃O₄@SiO₂ NPs is about 122.5 K. It is expected that the multifunctional core–shell nanoparticles can be used in bio-imaging.     

Young’s modulus of PS/CeO<Subscript>2</Subscript> composite with core/shell structure microspheres measured using atomic force microscopy

Organic–inorganic composite microspheres with PS as a core and CeO₂ as a shell were synthesized by in situ chemical precipitation method. The size of PS core was 117, 163, 206, and 241 nm, respectively, and the shell thickness was about 10 nm. The CeO₂ shell was composed of a large number of nanoparticles, of which the size was 4–6 nm. Atomic force microscopy was employed to probe the mechanical properties of core–shell structured ceria-coated polystyrene (PS/CeO₂) composite microspheres. On the basis of Hertz’s theory of contact mechanics, compressive moduli were measured by the analysis of force–displacement curves captured on the microsphere samples. For a fixed CeO₂ shell thickness, the Young’s modulus of composite microspheres increased with an increase of PS core size. The calculated Young’s moduli (E) values of composites for 136, 185, 242, and 261 nm in diameter were 5.78 ± 0.9, 7.23 ± 1.3, 11.46 ± 1.7, and 14.54 ± 1.4 GPa, respectively. The results revealed the effect of the CeO₂ shell on the elastic deformation of the PS core. This approach will provide fundamental insights into the actual role of organic/inorganic core/shell composite abrasives in chemical mechanical polishing.     

Nanostructures of gold coated iron core-shell nanoparticles and the nanobands assembled under magnetic field

Pure metal iron nanoparticles are unstable in the air. By a coating iron on nanoparticle surface with a stable noble metal, these air-stable nanoparticles are protected from the oxidation and retain most of the favorable magnetic properties, which possess the potential application in high density memory device by forming self-assembling nanoarrays. Gold-coated iron core-shell structure nanoparticles (Fe/Au) synthesized using reverse micelles were characterized by transmission electron microscopy (TEM). The average nanoparticle size of the core-shell structure is about 8 nm, with about 6 nm diameter core and 1∼2 nm shell. Since the gold shell is not epitaxial growth related to the iron core, the morié pattern can be seen from the overlapping of iron core and gold shell. However, the gold shell lattice can be seen by changing the defocus of TEM. An energy dispersive X-ray spectrum (EDS) also shows the nanoparticles are air-stable. The magnetic measurement of the nanoparticles also proved successful synthesis of gold coated iron core-shell structure. The nanoparticles were then assembled under 0.5 T magnetic field and formed parallel nanobands with about 10 μm long. Assembling two dimensional ordered nanoarrays are still under going. Received 29 November 2000     

Gold decorated NaYF<Subscript>4</Subscript>:Yb,Er/NaYF<Subscript>4</Subscript>/silica (core/shell/shell) upconversion nanoparticles for photothermal destruction of BE(2)-C neuroblastoma cells

Gold decorated NaYF₄:Yb,Er/NaYF₄/silica (core/shell/shell) upconversion (UC) nanoparticles (~70–80 nm) were synthesized using tetraethyl orthosilicate and chloroauric acid in a one-step reverse microemulsion method. Gold nanoparticles (~6 nm) were deposited on the surface of silica shell of these core/shell/shell nanoparticles. The total upconversion emission intensity (green, red, and blue) of the core/shell/shell nanoparticles decreased by ~31% after Au was deposited on the surface of silica shell. The upconverted green light was coupled with the surface plasmon of Au leading to rapid heat conversion. These UC/silica/Au nanoparticles were very efficient to destroy BE(2)-C cancer cells and showed strong potential in photothermal therapy.     

Nanostructured microspheres of silver @ zinc oxide: an excellent impeder of bacterial growth and biofilm

Au@TiO₂ core–shell hollow nanoparticles were prepared by a simple hydrothermal method without surfactants or templates. The core–shell structure materials were characterized by transmission electron microscopy, X-ray powder diffraction, scanning electron microscopy, and specific surface area of the test (BET). The catalytic activity was tested in a stainless reactor with a fixed bed and connected with a gas chromatograph. The results show that the microstructure, crystallography, and morphology were correlated with the hydrothermal reaction time and temperature, and the properties of the solvent. The crystallinity degree of TiO₂ and the particle size increased with the reaction time and temperature. Particles with different morphologies can be obtained when using different solvents. The size of microsphere can be controlled easily by changing the amount of TiF₄. This material exhibited the complete CO conversion temperature to be about 130 °C and no deactivation was observed after 1,000 min reaction.     

Biodegradable thermoresponsive polymeric magnetic nanoparticles: a new drug delivery platform for doxorubicin

The use of nanoparticles as drug delivery systems for anticancer therapeutics has great potential to revolutionize the future of cancer therapy. The aim of this study is to construct a novel drug delivery platform comprising a magnetic core and biodegradable thermoresponsive shell of tri-block-copolymer. Oleic acid-coated Fe₃O₄ nanoparticles and hydrophilic anticancer drug “doxorubicin” are encapsulated with PEO–PLGA–PEO (polyethylene oxide–poly d, l lactide-co-glycolide–polyethylene oxide) tri-block-copolymer. Structural, magnetic, and physical properties of Fe₃O₄ core are determined by X-ray diffraction, vibrating sample magnetometer, and transmission electron microscopy techniques, respectively. The hydrodynamic size of composite nanoparticles is determined by dynamic light scattering and is found to be ~36.4 nm at 25 °C. The functionalization of magnetic core with various polymeric chain molecules and their weight proportions are determined by Fourier transform infrared spectroscopy and thermogravimetric analysis, respectively. Encapsulation of doxorubicin into the polymeric magnetic nanoparticles, its loading efficiency, and kinetics of drug release are investigated by UV–vis spectroscopy. The loading efficiency of drug is 89% with a rapid release for the initial 7 h followed by the sustained release over a period of 36 h. The release of drug is envisaged to occur in response to the physiological temperature by deswelling of thermoresponsive PEO–PLGA–PEO block-copolymer. This study demonstrates that temperature can be exploited successfully as an external parameter to control the release of drug.     

In situ fabrication and thermoelectric properties of PbTe–polyaniline composite nanostructures

PbTe–polyaniline (PANi) composite nanopowders were in situ fabricated via an interfacial polymerization method at room temperature (~293 K). The phase structure, composition, and morphology of the powders were characterized by X-ray powder diffraction, infrared spectroscopy, transmission electron microscopy (TEM), and high-resolution TEM, respectively. The results show that the composite nanopowders consist of PbTe nanoparticles, PANi/PbTe core–shell nanostructure, and PbTe/PANi/PbTe three-layer sphere-like nanostructures. Formation mechanism of the PbTe–PANi composite nanostructures was proposed. The thermoelectric properties of the composite powders after being cold pressed into pellets were measured from 293 to 373 K. As the temperature increases from 293 to 373 K, the Seebeck coefficient of the composite decreases from 626 to 578 μV K⁻¹ and the electrical conductivity increases from 1.9 to 2.2 S m⁻¹.     

Preparation and photocatalytic properties of magnetically reusable Fe3O4@ZnO core/shell nanoparticles

Fe₃O₄@ZnO binary nanoparticles were synthesized by a simple two-step chemical method and characterized using various analytical instruments. TEM result proved the binary nanoparticles have core/shell structures and average particle size is 60 nm. Photocatalytic investigation of Fe₃O₄@ZnO core/shell nanoparticles was carried out using rhodamine B (RhB) solution under UV light. Fe₃O₄@ZnO core/shell nanoparticles showed enhanced photocatalytic performance in comparison with the as prepared ZnO nanoparticles. The enhanced photocatalytic activity for Fe₃O₄@ZnO might be resulting from the higher concentration of surface oxygen vacancies and the suppressing effect of the Fe³⁺ ions on the recombination of photoinduced electron–hole pairs. Magnetization saturation value (5.96 emu/g) of Fe₃O₄@ZnO core/shell nanoparticles is high enough to be magnetically removed by applying a magnetic field. The core/shell photocatalyst can be easily separated by using a commercial magnet and almost no decrease in photocatalytic efficiency was observed even after recycling six times.     

Synthesis and characterization of aqueous MPA-capped CdS–ZnS core–shell quantum dots

The novel CdS–ZnS core–shell nanoparticles are synthesized using simple one-step aqueous chemical approach. 3-mercaptopropionic acid (MPA) was used as the capping molecule. The structural and optical properties of the prepared samples are characterized by X-ray diffraction (XRD), UV–vis absorption spectroscopy, photoluminescence (PL) spectroscopy, energy-dispersive X-ray (EDX) and transition electron microscopy (TEM). The studies show that pH contributed noticeably to the growth and optical properties of nanoparticles. The TEM results indicate that the prepared particles have core–shell structure.     

Synthesis and characterisation: Zinc oxide–sulfide nanocomposites

A novel synthesis method is presented for the preparation of nanosized-semiconductor zinc oxide–sulphide (ZnO/ZnS) core–shell nanocomposites, both formed sequentially from a single-source solid precursor. ZnO nanocrystals were synthesized by a simple co-precipitation method and ZnO/ZnS core–shell nanocomposites were successfully fabricated by sulfidation of ZnO nanocrystals via a facile chemical synthesis at room temperature. The as-obtained samples were characterized by X-ray diffraction and transmission electron microscopy. The results showed that the pure ZnO nanocrystals were hexagonal wurtzite crystal structures and the ZnS nanoparticles were sphalerite structure with the size of about 10 nm grown on the surface of the ZnO nanocrystals. Optical properties measured reveal that ZnO/ZnS core–shell nanocomposites have integrated the photoluminescent effect of ZnO and ZnS. Based on the results of the experiments, a possible formation mechanism of ZnO/ZnS core–shell nanocomposites was also suggested. This treatment is suggested to improve various properties of optoelectronically valuable ZnO/ZnS nanocomposites. These nanosized semiconductor nanocomposites can form a new class of luminescent materials for various applications.     

Antimicrobial and antitumor activities of 1,2,4‐triazoles/polypyrrole chitosan core shell nanoparticles

Combination of natural biodegradable polymer with a synthetic polymer offers excellent properties for the support in drug delivery system. For this purpose, biodegradable conductive nanoparticle polypyrrole based on chitosan (PPC) has been prepared via oxidative polymerization of pyrrole in presence of chitosan using FeCl₃ as oxidant in acidic medium and used as a carrier for 1,2,4‐triazoles. The resultant nanoparticles were characterized by X‐ray diffraction, Fourier transform infrared analysis, transmission electron microscopy, scanning electron microscopy, and thermal gravimetric analysis. The results indicate that spherical nanoparticle of average diameter 52 ± 8 nm was successfully prepared. The spherical particles were composed of dark sphere surrounded by grey shell. A circumferential dark ring is observed in the shell after loading 1,2,4‐triazoles into PPC nanoparticles. The loaded triazoles were released almost linearly against time in a sustained fashion into different pH media. The mechanism of triazoles release was determined using different kinetics equations. The antibacterial activities against the gram‐negative and gram‐positive bacteria were examined. Furthermore, the antitumor activity of PPC nanoparticles loaded 1,2,4‐triazoles was also examined against Ehrlich ascites carcinoma cells and breast cancer cell line (MCF7). Polypyrrole chitosan loaded nanoparticles exhibited higher antitumor activity than 1,2,4‐triazoles.     

Synthesis and Characterization of Ag@TiO2 Core-shell Nanoparticles and TiO2 Nanobubbles

Ag@TiO₂ core-shell structured particles of nano-size dimensions have been successfully prepared via a one-step way, which has proved quite effective in procuring stable colloids. Transmission electron microscopy (TEM) was employed to characterize the core size and the shell thickness, which typically were 20~40 nm and ~2 nm, respectively. X-ray diffraction (XRD) indicated the existence of silver. Optical absorption dependence on core size and synthetic temperature has been explored by UV–Vis absorption spectroscopy. Finally, the interesting titanium dioxide nanobubbles with silver core leached out by a unique means, were studied, which consequently proved the core-shell structure of the prepared nanoparticles, confirming the TEM observation.     

Signatures of spin-glass freezing in Co/CoO nanospheres and nanodiscs

We present a study of the magnetic properties of Co nanoparticles having a combination of both spherical and disk shapes. The hcp Co nanospheres with an average diameter of 11 nm and nanodiscs of dimensions ∼2.5×15 nm² were prepared by thermal decomposition of di-cobalt octacarbonyl in the presence of an amine surfactant. The as-synthesized nanoparticles were oxidized to grow an antiferromagnetic layer. High resolution transmission electron microscopy showed the presence of a ferromagnet/antiferromagnet (Co/CoO) interface with a 2.2-nm thick CoO shell on the spherical nanoparticles and 0.5 nm thick on nanodiscs. We report the temperature and field dependent DC magnetization, frequency, field, and temperature dependent AC susceptibility, and the radio frequency transverse susceptibility. A low temperature paramagnetic behavior was observed in the DC magnetization at high fields and is assigned to defects in the CoO shell that are not coupled to the antiferromagnetic lattice. Our results support the existence of a low temperature frozen, disordered magnetic state, characterized by a strong exchange coupling between the structurally disordered, spin-glass CoO shell and Co core.     

Core/shell structured ZnO/SiO2 nanoparticles: Preparation, characterization and photocatalytic property

ZnO nanoparticles were prepared by a simple chemical synthesis route. Subsequently, SiO₂ layers were successfully coated onto the surface of ZnO nanoparticles to modify the photocatalytic activity in acidic or alkaline solutions. The obtained particles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS) and zeta potential. It was found that ultrafine core/shell structured ZnO/SiO₂ nanoparticles were successfully obtained. The photocatalytic performance of ZnO/SiO₂ core/shell structured nanoparticles in Rhodamine B aqueous solution at varied pH value were also investigated. Compared with uncoated ZnO nanoparticles, core/shell structured ZnO/SiO₂ nanoparticles with thinner SiO₂ shell possess improved stability and relatively better photocatalytic activity in acidic or alkaline solutions, which would broaden its potential application in pollutant treatment.     

Preparation of magnetic FeCo nanoparticles by coprecipitation route

Magnetic FeCo nanoparticles with high saturation magnetization (M_s = 148 emu/g) at 15 kOe were prepared by a coprecipitation route. The value of M_s for FeCo nanoparticles depends on the ratio of Fe to Co components. The size of the nanoparticles was confirmed by transmission electron microscopy (TEM) images, and morphology of the nanoparticles was obtained by field emission scanning electron microscopy (FE-SEM) images. The crystal structure of the nanoparticles dependent on annealing was characterized by X-ray diffraction data. The magnetic properties were characterized by saturation magnetization from a hysteresis loop by VSM.     

Preparation and characterization of silica-coated Fe3O4 nanoparticles used as precursor of ferrofluids

Fe₃O₄ magnetic nanoparticles (MNPs) were synthesized by the co-precipitation of Fe³⁺ and Fe²⁺ with ammonium hydroxide. The sodium citrate-modified Fe₃O₄ MNPs were prepared under Ar protection and were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). To improve the oxidation resistance of Fe₃O₄ MNPs, a silica layer was coated onto the modified and unmodified MNPs by the hydrolysis of tetraethoxysilane (TEOS) at 50 °C and pH 9. Afterwards, the silica-coated Fe₃O₄ core/shell MNPs were modified by oleic acid (OA) and were tested by IR and VSM. IR results revealed that the OA was successfully grafted onto the silica shell. The Fe₃O₄/SiO₂ core/shell MNPs modified by OA were used to prepare water-based ferrofluids (FFs) using PEG as the second layer of surfactants. The properties of FFs were characterized using a UV-vis spectrophotometer, a Gouy magnetic balance, a laser particle size analyzer and a Brookfield LVDV-III+ rheometer.