Probing furanose ring conformation by gas-phase computational methods: energy profile and structural parameters in methyl beta-D-arabinofuranoside as a function of ring conformation

The potential energy surface of methyl beta-D-arabinofuranoside (3) has been studied by ab initio molecular orbital (HF/6-31G) and density functional theory (B3LYP/6-31G) calculations via minimization of the 10 possible envelope conformers. The partial potential energy surface identified that the global minimum and lowest energy northern conformer was E(2). In the HF calculations, (2)E was the most stable southern conformer, while the density functional theory methods identified (4)E as the local minimum in this hemisphere. Additional calculations at higher levels of theory showed that the B3LYP-derived energies of many of the envelope conformers of 3 are dependent upon the basis set used. It has also been demonstrated that B3LYP/6-31+G//B3LYP/6-31G single point energies are essentially the same as those obtained from full geometry optimizations at the B3LYP/6-31+G level. The northern and southern minima of the B3LYP/6-31+G surface are, respectively, the E(2) and (2)E conformers. The B3LYP/6-31G geometries were used to study the relationship between ring conformation and various structural parameters including bond angles, dihedral angles, bond lengths, and interatomic distances.     

Conformations of dimethylhydrogen phosphonate (DMHP): a matrix isolation infrared and ab initio study

The infrared spectra of dimethylhydrogen phosphonate (DMHP) isolated in nitrogen, argon and krypton matrices using an effusive source at 298 and 373 K have been recorded. Experiments were also performed using a supersonic jet source to look for conformational cooling in the expansion process. As a result of these experiments, infrared spectral characteristics of the ground and higher energy conformers of the DMHP have been identified for the first time. The structures of DMHP were optimized at the hybrid B3LYP and Hartree fock (HF) levels of theory using the 6-31++G** basis sets. Computationally, four minima were obtained corresponding to DMHP conformers with G (+/-)G (-/+), G (-)G (-), TG (+) and TG (-) structures in the order of increasing energy. Frequency calculations were done to confirm that the structures were indeed minima on the potential energy surface (PES). The computed frequencies corroborated well with the experimental matrix isolation infrared frequencies leading to definite assignments of the infrared features of DMHP, for the G (+/-)G (-/+) and TG (+) conformers. At B3LYP/6-31++G** level, the energy difference between the G (+/-)G (-/+) and G (-)G (-) conformer was 1.53 kcal/mol, and that between G (+/-)G (-/+) and TG (+), G (+/-)G (-/+) and TG (-) were 1.65 and 1.95 kcal/mol. Transition-state calculations were also carried out at B3LYP/6-31++G** level connecting the G (+/-)G (-/+) to G (-)G (-), TG (+) and TG (-) conformers. Computations indicated that the conformer interconversion between G (-)G (-) --> G (+/-)G (-/+) is barrierless, whereas the barriers for TG (+) --> G (+/-)G (-/+) and TG (-) --> G (+/-)G (-/+) are 1.47 and 0.88 kcal/mol, respectively.     

Conformers and intramolecular hydrogen bonding of the oxalic acid monomer and its anions

Density functional theory, B3LYP/6‐31G** and B3LYP/6‐311+G(2d,p), and ab initio MP2/6‐31G** calculations have been carried out to investigate the conformers, transition states, and energy barriers of the conformational processes of oxalic acid and its anions. QCISD/6‐31G** geometrical optimization is also performed in the stable forms. Its calculated energy differences between the two most stable conformers are very near to the related observed value at 7.0 kJ/mol. It is found that the structures and relative energies of oxalic acid conformers predicted by these methods show similar results, and that the conformer L1 (C_2h) with the double‐interfunctional‐groups hydrogen bonds is the most stable conformer. The magnitude of hydrogen bond energies depends on the energy differences of various optimized structures. The hydrogen bond energies will be about 32 kJ/mol for interfunctional groups, 17 kJ/mol for weak interfunctional groups, 24 kJ/mol for intra‐COOH in (COOH)₂, and 60 kJ/mol for interfunctional groups in (COOH)COO⁻¹ ion if calculated using the B3LYP/6‐311+G(2d,p) method. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 76: 541–551, 2000     

Analysis of vibrational spectra of 3-halo-1-propanols CH(2)XCH(2)CH(2)OH (X is Cl and Br)

The conformational stability and the three rotor internal rotations in 3-chloro- and 3-bromo-1-propanols were investigated by DFT-B3LYP/6-311+G and ab initio MP2/6-311+G, MP3/6-311+G and MP4(SDTQ)//MP3/6-311+G levels of theory. On the calculated potential energy surface twelve distinct minima were located all of which were not predicted to have imaginary frequencies at the B3LYP level of theory. The calculated lowest energy minimum in the potential curves of both molecules was predicted to correspond to the Gauche-gauche-trans (Ggt) conformer in excellent agreement with earlier microwave and electron diffraction results. The equilibrium constants for the conformational interconversion of the two 3-halo-1-propanols were calculated at the B3LYP/6-311+G level of calculation and found to correspond to an equilibrium mixture of about 32% Ggt, 18% Ggg1, 13% Tgt, 8% Tgg and 8% Gtt conformations for 3-chloro-1-propanol and 34% Ggt, 15% Tgt, 13% Ggg1, 9% Tgg and 7% Gtt conformations for 3-bromo-1-propanol at 298.15K. The nature of the high energy conformations was verified by carrying out solvent experiments using formamide ( epsilon=109.5) and MP3 and MP4//MP3 calculations. The vibrational frequencies of each molecule in its three most stable forms were computed at the B3LYP level and complete vibrational assignments were made based on normal coordinate calculations and comparison with experimental data of the molecules.     

Microwave spectrum of 3-butyne-1-thiol: evidence for intramolecular S-H...pi hydrogen bonding

The microwave spectrum of 3-butyne-1-thiol has been studied by means of Stark-modulation microwave spectroscopy and quantum-chemical calculations employing the B3LYP/6-311++G(3df,2pd), MP2/aug-cc-pVTZ, MP2/6-311++G(3df,2pd), and G3 methods. Rotational transitions attributable to two conformers of this molecule were assigned. One of these conformers possesses an antiperiplanar arrangement of the atoms S-C1-C2-C3, while the other is synclinal and stabilized by the formation of an intramolecular hydrogen bond between the H-atom of the thiol group and the pi-electrons of the C[triple bond]C triple bond. The energy difference between these conformers was estimated to be 1.7(4) kJ mol(-1) by relative intensity measurements, with the hydrogen-bonded conformer being lower in energy. The spectra of five vibrationally excited states of the synclinal conformer were observed, and an assignment of these states to particular vibrational modes was made with the aid of a density functional theory (DFT) calculation of the vibrational frequencies at the B3LYP/6-311++G(3df,2pd) level of theory.     

吡啶-BH~3相互作用复合物的理论研究

对吡啶-BH~3复合物分别用MP2/6-31+G^*和B3LYP/6-31+G^*进行理论计算以预测该复合物的构型及解离能，得到四种构型，在MP2优化构型基础上作CCSD/6-31+G^*单点能量计算以验证MP2与B3LYP结果的可靠性，然后用B3LYP作振动频率分析，计算了各构型的垂直电离势，最后用更大基组作单点能量计算和自然键轨道(NBO)分析。结果表明，N-B直接相连的构型最稳定，其解离能为141.50kJ/mol,MP2和B3LYP对N-H接近的构型结果相关较大，另外两种构型稳定性介于二者之间，解离能分别为15.18kJ/mol,14.06kJ/mol(MP2/6-31+G^*)。     

Structure of the boronic acid dimer and the relative stabilities of its conformers

Despite the widespread use of boronic acids in materials science and as pharmaceutical agents, many aspects of their structure and reactivity are not well understood. In this research the boronic acid dimer, [HB(OH)(2)](2), was studied by second-order M?ller-Plesset (MP2) perturbation theory and coupled cluster methodology with single and double excitations (CCSD). Pople split-valence 6-31+G*, 6-311G**, and 6-311++G** and Dunning-Woon correlation-consistent cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were employed for the calculations. A doubly hydrogen-bonded conformer (1) of the dimer was consistently found to be lowest in energy; the structure of 1 was planar (C(2h)) at most computational levels employed but was significantly nonplanar (C(2)) at the MP2/6-311++G** and CCSD/6-311++G** levels, the result of an intrinsic problem with Pople-type sp-diffuse basis functions on heavy atoms. The dimerization energy, enthalpy, and free energy for the formation of (1) from the exo-endo conformer of the monomer were -10.8, -9.2, and +1.2 kcal/mol, respectively, at the MP2/aug-cc-pVTZ level. Several other hydrogen-bonded conformers of the dimer were local minima on the potential energy surface (PES) and ranged from 2 to 5 kcal/mol higher in energy than 1. Nine doubly OH-bridged conformers, in which the boron atoms were tetracoordinated, were also local minima on the PES, but they were all greater than 13 kcal/mol higher in energy than 1; doubly H-bridged structures proved to be transition states. MP2 and CCSD results were compared to those from the BLYP, B3LYP, OLYP, O3LYP, PBE1PBE, and TPSS functionals with the 6-311++G** and aug-cc-pVTZ basis sets; the PBE1PBE functional performed best relative to the MP2 and CCSD results. Self-consistent reaction field (SCRF) calculations predict that boronic acid dimerization is less favorable in solution than in vacuo.     

Conformations of dimethoxymethane: matrix isolation infrared and ab initio studies

Conformations of dimethoxymethane (DMM) were studied using matrix isolation infrared spectroscopy. DMM was trapped in an argon matrix using an effusive source at 298, 388 and 430 K. Experiments were also done using a supersonic jet source to look for conformational cooling in the expansion process. As a result of these experiments, spectrally resolved infrared features of the ground and first higher energy conformer of DMM have been recorded, for the first time. The experimental studies were supported by ab initio computations performed at HF and B3LYP levels, using a 6-31++G** basis set. Computationally, four minima were identified corresponding to conformers with GG, TG, G+G- and TT structures. The computed frequencies at the B3LYP level were found to compare well with the experimental matrix isolation frequencies, leading to a definitive assignment of the infrared features of DMM, for the GG and TG conformers. At the B3LYP/6-31++G** level, the energy difference between the GG and TG conformers was computed to be 2.30 kcal mol(-1). The barrier for conformation interconversion, TG-->GG level was calculated to be 0.95 kcal mol(-1). This value is consistent with the experimental observation that the spectral features due to the TG conformer disappeared in the matrix on annealing.     

A microwave and quantum chemical study of the conformational properties and intramolecular hydrogen bonding of 1-fluorocyclopropanecarboxylic acid

The structural and conformational properties of 1-fluorocyclopropanecarboxylic acid have been explored by microwave spectroscopy and a series of ab initio (MP2/6-311++G(d,p) level), density functional theory (B3LYP/aug-cc-pVTZ level), and G3 quantum chemical calculations. Four "stable" conformers, denoted conformers I-IV, were found in the quantum chemical calculations, three of which (conformers I -III) were predicted to be low-energy forms. Conformer I was in all the quantum chemical calculations predicted to have the lowest energy, conformer III to have the second lowest energy, and conformer II to have the third lowest energy. Conformers II and III were calculated to have relatively large dipole moments, while conformer I was predicted to have a small dipole moment. The microwave spectrum was investigated in the 18-62 GHz spectral range. The microwave spectra of conformers II and III were assigned. Conformer I was not assigned presumably because its dipole moment is comparatively small. Conformer II is stabilized by an intramolecular hydrogen bond formed between the fluorine atom and the hydrogen atom of the carboxylic acid group. Conformer III has a synperiplanar orientation for the F-C-C=O and H-O-C=O chains of atoms. Its dipole moment is: mua = 3.4(10), mub = 10.1(13), and muc = 0.0 (assumed) and mu(tot) = 10.6(14) x 10(-30) C m [3.2(4) D]. Several vibrationally excited states of the lowest torsional mode of each of II and III were also assigned. The hydrogen-bonded conformer II was found to be 2.7(2) kJ/mol less stable than III by relative intensity measurements. Absolute intensity measurements were used to show that the unassigned conformer I is the most abundant form present at a concentration of roughly 65% at room temperature. Conformer I was estimated to be ca. 5.0 kJ/mol more stable than the hydrogen-bonded rotamer (conformer II) and ca. 2.3 kJ/mol more stable than conformer III. The best agreement with the theoretical calculations is found in the MP2 calculations, which predict conformer I to be 5.1 kJ/mol more stable than III and 1.7 kJ/mol more stable than II.     

A computational study of conformational interconversions in 1,4-dithiacyclohexane (1,4-dithiane)

Ab initio molecular orbital theory with the 6-31G(d), 6-31G(d,p), 6-31+G(d), 6-31+G(d,p), 6-31+G(2d,p), 6-311G(d), 6-311G(d,p), and 6-311+G(2d,p) basis sets and density functional theory (BLYP, B3LYP, B3P86, B3PW91) have been used to locate transition states involved in the conformational interconversions of 1,4-dithiacyclohexane (1,4-dithiane) and to calculate the geometry optimized structures, relative energies, enthalpies, entropies, and free energies of the chair and twist conformers. In the chair and 1,4-twist conformers the C-Hax and C-Heq bond lengths are equal at each carbon, which suggest an absence of stereoelectronic hyperconjugative interactions involving carbon-hydrogen bonds. The 1,4-boat transition state structure was 9.53 to 10.5 kcal/mol higher in energy than the chair conformer and 4.75 to 5.82 kcal/mol higher in energy than the 1,4-twist conformer. Intrinsic reaction coordinate (IRC) calculations showed that the 1,4-boat transition state structure was the energy maximum in the interconversion of the enantiomers of the 1,4-twist conformer. The energy difference between the chair conformer and the 1,4-twist conformer was 4.85 kcal/mol and the chair-1,4-twist free energy difference (deltaG degrees (c-t)) was 4.93 kcal/mol at 298.15 K. Intrinsic reaction coordinate (IRC) calculations connected the transition state between the chair conformer and the 1,4-twist conformer. This transition state is 11.7 kcal/mol higher in energy than the chair conformer. The effects of basis sets on the 1,4-dithiane calculations and the relative energies of saturated and unsaturated six-membered dithianes and dioxanes are also discussed.     

Three rotor potential energy scans, conformational equilibrium constants and vibrational analysis of 3-fluoro-1-propanol CH(2)FCH(2)CH(2)OH

The conformational stability and the three rotor internal rotations in 3-fluoro-1-propanol were investigated by the DFT-B3LYP/6-311+G** and the ab initio MP2/6-311+G** levels of theory. The calculated potential energy curves of the molecule at both levels of theory were consistent with complex conformational equilibria of about 12 minima, all of which were predicted to have real frequencies at both the B3LYP and the MP2 levels. The lowest energy minimum in the potential curves of 3-fluoro-1-propanol was predicted to correspond to the Gauche-gauche-trans (Ggt) conformer in excellent agreement with microwave and electron diffraction results. The equilibrium constants for the conformational interconversion of the molecule were calculated and found to correspond to an equilibrium mixture of about 33% Ggt, 14% Ggg1 and 13% Gg1g and about 43% Ggt, 12% Ggg1 and 10% Gg1g distribution by the B3LYP/6-311+G** and the MP2/6-311+G** calculations, respectively, at 298.15K. The vibrational frequencies of each molecule in its three stable forms were computed at B3LYP level and complete vibrational assignments were made based on normal coordinate calculations and comparison with experimental data of the molecule.     

Chair, boat and twist conformation of dodecamethylcyclohexasilane and undecamethylcyclohexasilane: a combined DFT and Raman spectroscopic study.

The conformations of dodecamethylcyclohexasilane Si6Me12 and undecamethylcyclohexasilane Si6Me11H have been investigated by ab initio calculations employing the B3LYP density functional with a 6-31+G(d) basis set. Local minima as well as transition structures were calculated with imposed symmetry constraints. For Si6Me12, three unique minima, which correspond to the chair, twist and boat conformations were located with relative zero-point-vibration-corrected energies of 0.0, 7.8 and 11.4 kJ mol(-1). A half-chair conformation with four coplanar silicon atoms connects the chair and twisted minima via an energy barrier of 16.0 and 8.2 kJ mol(-1), respectively. A second transition structure with a barrier of 3.9/0.3 kJ mol(-1) connects the twist with the boat structure. Solution Raman spectra of Si6(CH3)12 and Si6(CD3)12 fully corroborate these results. Below -40 degrees C, the symmetric SiSi ring breathing vibration is a single line, which develops a shoulder (originating from the twist conformer) at longer wavelengths whose intensity increases with increasing temperature. From a Van't Hoff plot, the chair/twist enthalpy difference is 6.6+/-1.5 kJ mol(-1) for Si6(CH3)12 and 6.0+/-1.5 kJ mol(-1) for Si6(CD3)12, which is in reasonable agreement with the ab initio results. Due to the low barrier, the boat conformation cannot be observed, because either the lowest torsional vibration level lies above it or a rapid interconversion between the twist and boat conformations occurs, resulting in averaged Raman spectra. For Si6Me11H, six local minima were located. The chair with the hydrogen atom in the axial position (axial chair) is the global minimum, followed by the equatorial chair (+1.9 kJ mol(-1)) and the three twist conformers (+5.3, +8.0 and +8.1 kJ mol(-1)). The highest local minimum (+11.9 kJ mol(-1)) is a C(s) symmetric boat with the hydrogen atom in the equatorial position. Two possible pathways for the chair-to-chair interconversion with barriers of 13.9 and 14.5 kJ mol(-1) have been investigated. The solution Raman spectra in the SiSi ring breathing region clearly show that below -50 degrees C only the axial and equatorial chairs are present, with an experimental deltaH-value of 0.46 kJ mol(-1). With increasing temperature a shoulder develops which is attributed to the combined twist conformers. The experimental deltaH-value is 6.9 kJ mol(-1), in good agreement with the ab initio results. Due to the low interconversion barriers, the various twist conformers cannot be detected separately.     

Diketoacid HIV-1 integrase inhibitors: An ab initio study

The stable tautomeric forms of two representative arene-substituted diketoacid HIV-1 integrase inhibitors, 5-ClTEP and L-731,988, were investigated by B3LYP with 6-31G*, 6-31G(d,p), and 6-31+G(d,p) basis sets. Optimization with MP2/6-31G* was also performed for 5-ClTEP. The solvation effect was considered using a conductor-like screening model. With the density functional theory method, the trans diketo conformations are more stable than the cis conformers. The difference is 14 kJ mol(-1) for 5-ClTEP and 33 kJ mol(-1) for L-731,988. Two trans diketo structures were obtained. The difference between these two trans diketo structures is less than 4 kJ mol(-1) calculated at the B3LYP/6-311+G(3df,2p) level. Two enol forms prevail over the diketo tautomers and are calculated to have the same free energy. Because there is no barrier observed between these two enol forms, they can interchange easily such that a delocalized transition state is suggested to be the observed form. Contradictory to the results of the MP2 method that predicts a preference for the trans diketo forms, the B3LYP method predicts a preference for the enol tautomers, which is in agreement with the experimental results.     

Conformational studies in the cyclohexane series. 2. Phenylcyclohexane and 1-methyl-1-phenylcyclohexane

The structures and relative energies of the conformers of phenylcyclohexane, and 1-methyl-1-phenylcyclohexane have been calculated at theoretical levels including HF/6-31G, B3LYP/6-311G, MP2/6-311G, MP2/6-311(2df,p), QCISD/6-311G, and QCISD/6-311G(2df,p). The latter gives conformational enthalpy (DeltaH degrees ), entropy (DeltaS degrees ), and free energy (DeltaG degrees ) values for phenylcyclohexane that are in excellent agreement with the experimental data. The calculations for 1-methyl-1-phenylcyclohexane find a free energy difference of 1.0 kcal/mol at -100 degrees C, favoring the conformation having an axial phenyl group, that is in only modest agreement with the experimental value of 0.32 +/- 0.04 kcal/mol. The origin of the phenyl rotational profiles for the conformers of phenylcyclohexane and 1-methyl-1-phenylcyclohexane is discussed.     

The C7-C10 cycloalkanes revisited

The conformers of cycloheptane through cyclodecane have been examined at the B3LYP/6-311+G* and MP2/6-311+G* theoretical levels, with some additional calculations at the CCD/6-311+G* and CCSD(T)/6-311++G** levels. With cyclooctane, B3LYP predicts that the boat-chair and crown conformers have similar energies, whereas MP2 and CCSD(T) predict that the crown conformer is 2 kcal/mol higher in energy. The latter is in agreement with the electron diffraction data. With cyclononane, B3LYP predicts that two of the higher-energy conformers found in molecular mechanics calculations should convert to one of the lower-energy conformers. However, MP2/6-311+G* optimizations find them to be true minima on the potential energy surface. B3LYP systematically predicts larger C-C-C bond angles for these compounds than either MP2 or CCD. The results of molecular mechanics MM4 calculations are generally in good agreement with those obtained using MP2.     

New insights into an old reaction. High-resolution x-ray powder diffraction of Wiberg's aminoalane intermediate

In accordance with the procedure described by E. Wiberg, Me(3)Al-NH(3) was heated as a bulk material in inert atmosphere to give a colorless liquid which slowly loses methane. Close to the end of this elimination reaction, the melt crystallized to give a microcrystalline powder of (Me(2)AlNH(2))(x)(). The structure of this intermediate has been solved by the method of high-resolution X-ray powder diffraction. The compound crystallizes in the monoclinic space group C2/c with the cell parameters of a = 15.0047(6) A, b = 8.7500(2) A, c = 24.4702(8) A, and beta = 107.290(2) degrees, with eight trimers (Me(2)AlNH(2))(3) per unit cell. These trimers crystallize in a boat conformation in contrast to the known trimers of the same composition where a twist-boat conformation had been found by single crystal determination. Different conformers of (Me(2)AlNH(2))(3) have been investigated by theoretical methods (HF/6-31G(d), B3LYP/6-31G(d), B3LYP/6-311G(d,p), MP2(fc)/6-31G(d), and MP2(fc)/6-311G(d,p)). The twist-boat and the chair conformer correspond to minima at the potential energy surface, whereas the boat conformer corresponds to a first-order transition state (relative energies of 0.45-2.56 kJ/mol (boat) and 6.66-11.91 kJ/mol (chair)). Relaxed scans of the potential energy surface at the HF/6-31G(d) and B3LYP/6-31G(d) levels have shown that the boat conformer (C(s)() symmetry) connects two enantiomers of the twist-boat form (C(2) symmetry).     

Matrix isolation infrared and ab initio study of the conformations of 2,2-dimethoxypropane

Conformations of 2,2-dimethoxypropane (DMP) were studied using matrix isolation infrared spectroscopy. An effusive source maintained at different temperatures (298, 388 and 430 K) was used to deposit DMP in a nitrogen matrix. As a result of these experiments, spectrally resolved infrared features of the ground and first higher energy conformer of DMP have been recorded, for the first time. The experimental studies were supported by ab initio computations performed at B3LYP/6-31++G** level. Computationally, four minima were identified corresponding to conformers with G+/-G-/+, TG+/-, G+/-G+/- and TT structures. The computed frequencies at the B3LYP level were found to compare well with the experimental matrix isolation frequencies, leading to a definitive assignment of the infrared features of DMP, for the G+/-G-/+ and TG+/- conformers. At the B3LYP/6-31++G** level, the energy difference between the G+/-G-/+ and TG+/- conformers was computed to be 3.25 kcal x mol(-1). The barrier for conformation interconversion, TG+/--->G+/-G-/+, was calculated to be 1.29 kcal x mol(-1). The magnitude of this barrier is consistent with the experimental observation that the spectral features due to the TG+/- decreased considerably in intensity when the matrix was annealed.     

Ab initio and DFT studies on 1-(thionitrosomethylene) hydrazine: conformers, energies, and intramolecular hydrogen-bond strength

In the current study, we present an intramolecular HB, molecular structure, π-electrons delocalization and vibrational frequencies analysis of 25 possible conformers of 1-(thionitrosomethylene) hydrazine by means of DFT (B3LYP), MP2 methods in conjunction with the 6-311++G** and augmented correlation-consistent polarized-valence triple-zeta basis sets and G2MP2 theoretical level. The influence of the solvent on the stability order of conformers and the strength of intramolecular hydrogen-bonding was considered using the Tomasi’s polarized continuum model. Statistical analyses of quantitative definitions of aromaticity, nucleus independent chemical shift, harmonic oscillator model of aromaticity, aromatic fluctuation index, and the π-electron delocalization parameter (Q) as a geometrical indicator of a local aromaticity, evaluated for this conformers. Further verification of the obtained transition state structures were implemented via intrinsic reaction coordinate (IRC) analysis. Calculations of the ¹H NMR chemical shift at GIAO/B3LYP/6-311++G** levels of theory are also presented. The calculated highest occupied molecular orbital (MO) and lowest unoccupied MO energies show that charge transfer occur within the molecule. Hydrogen-bond energies for H-bonded conformers were obtained from Espinosa method and the natural bond orbital theory and the atoms in molecules theory were also applied to get a more precise insight into the nature of such H-bond interactions.     

Infrared multiple photon dissociation spectroscopy of potassiated proline

The structure of proline in [proline + K]+ has been investigated in the gas phase using high level DFT and MP2 calculations and infrared photo dissociation spectroscopy with a free electron laser (FELIX). The respective FELIX spectrum of [proline + K]+ matches convincingly the calculated spectra of two structurally closely related and nearly iso-energetic zwitterionic salt bridge (SB) structures. An additional unresolved band at approximately 1725 cm(-1) matching with the characteristic CO stretching mode of charge solvation (CS) structures points toward the presence of a minor population of these conformers of proline in [proline + K]+. However, theory predicts a significant energy gap of 18.9 kJ mol(-1) (B3LYP/6-311++G(2d,2p)) or 15.6 kJ mol(-1) (MP2) between the lowest CS conformer of proline and the clearly favored SB structure.