Interfacial interaction between dextran sulfate and lipid monolayers: an electrochemical study

The interaction between dextran sulfate (DS) with zwitterionic dipalmitoylphosphatidylcholine (DPPC) and negatively charged dipalmitoylphosphatidic acid monolayers at different surface pressures at air-liquid and liquid-liquid interfaces was studied using Langmuir-Blodgett (LB) and electrochemical techniques. The negatively charged DS can bind to phospholipids via calcium ions. To investigate the mechanism of the adsorption of DS on lipid monolayers, compression isotherms (pi-A) and capacitance-potential curves were measured, and a theoretical model was developed to interpret the capacitance data. The compression of lipid monolayers in the presence of DS led to a more condensed hybrid layer, removing the LE-LC phase transition of DPPC. Lower surface pressures improved the binding of DS on the lipid monolayers via calcium bridges due to the electrostatic attraction. Alternating current voltammetry and cyclic voltammetry were used to monitor the transfer of a cationic beta-blocker (metoprolol) across lipid monolayers in the absence and presence of the polyelectrolyte and to compare with the transfer of the standard probe, tetraethylammonium cation. Results showed a strong dependence on (i) the surface pressure, (ii) the applied potential, and, (iii) in the case of the hybrid layer, the charge of the phospholipid headgroup. Finally, results were also confirmed by attenuated total reflection Fourier transform infrared spectroscopy, performed after transferring lipid multilayers onto a solid substrate by the LB method.     

Incorporation of Blood-Clotting Proteins into Phospholipid Langmuir Monolayers: A Fluorescence Microscopy Study

Phospholipid monolayers adsorbed at an air-water interface are model cell membranes and have been used in this work to study interactions with blood-clotting proteins. Factor I (non-membrane binding) was used as a control protein, and its association with L-alpha-dipalmitoylphosphatidylcholine Langmuir monolayers was compared to factor VII, a membrane-binding protein. Fluorescence micrographs indicated that factor I penetration of the lipid monolayers in the phase transition region occurred extensively, causing condensation of the lipid film. The association of factor I with phospholipid monolayers was deemed nonspecific. Factor VII was shown to associate with the periphery of lipid domains in the absence of calcium ions, causing flattening of domain edges. In the presence of calcium, factor VII induced expansion of the lipid monolayer. This effect is a specific interaction attributed to exposure of hydrophobic residues upon calcium binding, followed by protein association with lipid hydrocarbon chains. Copyright 2001 Academic Press.     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

Adsorption of CETP on monolayers formed from HDL extracted lipids

To obtain information on the interactions between CETP and HDL3 lipoproteins, we have studied (by surface tension measurements) the adsorption of the CETP at the air–water interface and at the interface between the water and monolayers formed by spreading of lipids extracted from HDL3. We have compared the interfacial behavior of CETP and ApoA-1 (the constitutive protein of HDL3); and the influence of monolayers composition and pressure on the kinetics of the CETP adsorption. The results obtained show that CETP was more expanded than the ApoA-1 which adsorbed more strongly at the air–water interface. CETP adsorbs more and quickly at the lipid interface that at the air–interface, specially for 20% fraction of cholesterol in the monolayer. Our results show that the adsorption of the CETP at the HDL3 surface lipids are strongly dependent of the composition of the monolayer and that the exclusion pressure of CETP varied from 31 to 33.7 mN m⁻¹ with the addition of cholesterol. Finally, the kinetics of the adsorption at water–lipid interface exhibited two steps (quick increase followed by slow decrease of the excess surface pressure) which should indicate a penetration into monolayer followed by a partial desorption of phospholipids with or without cholesterol corresponding to a proteolipid association.     

Maxwell displacement current allows to study structural changes of gramicidin A in monolayers at the air-water interface

We applied methods of measurement Maxwell displacement current (MDC) pressure-area isotherms and dipole potential for analysis of the properties of gramicidin A (gA) and mixed gA/DMPC monolayers at an air-water interface. The MDC method allowed us to observe the kinetics of formation of secondary structure of gA in monolayers at an air-water interface. We showed, that secondary structure starts to form at rather low area per molecule at which gA monolayers are in gaseous state. Changes of the MDC during compression can be attributed to the reorientation of dipole moments in a gA double helix at area 7 nm(2)/molecule, followed by the formation of intertwined double helix of gA. The properties of gA in mixed monolayers depend on the molar fraction of gA/DMPC. At higher molar fractions of gA (around 0.5) the shape of the changes of dipole moment of mixed monolayer was similar to that for pure gA. The analysis of excess free energy in a gel (18( ) degrees C) and in a liquid-crystalline phase (28( ) degrees C) allowed us to show influence of the monolayer structural state on the interaction between gA and the phospholipids. In a gel state and at the gA/DMPC molar ratio below 0.17 the aggregates of gA were formed, while above this molar ratio gA interacts favorably with DMPC. In contrast, for DMPC in a liquid-crystalline state aggregation of gA was observed for all molar fractions studied. The effect of formation ordered structures between gA and DMPC is more pronounced at low temperatures.     

Interactions of anthracyclines with zwitterionic phospholipid monolayers at the air-water interface

The present note describes the use of surface pressure measurements (Langmuir monolayer technique) for the analysis of interactions of two different anthracyclines (adriamycin and daunorubicin) with a non-ionic, zwitterionic phospholipid monolayer, at the air-water interface. Because the surface membrane of the cell is the first barrier encountered by the anthracyclines in the treatment of cancer, drug-membrane interactions studied in model (monolayers or bilayers) and natural systems play an important role in the understanding of the bioactivity properties of these molecules. We report here the rate constants of the adsorption process of adriamycin and daunorubicin in the presence of a zwitterionic phospholipid monolayer at the air-water interface. Because interactions with the lipid monolayer strongly depend on the molecular packing of the lipid, we investigated this process at a relatively low surface pressure (7 mN/m), the interactions being favoured by the gaseous and liquid expanded structure of the lipid monolayer. The apparent molecular area of these molecules during the insertion into the lipid film and their interactions with the phospholipid polar head groups was evaluated and the estimated percentage of anthracyclines at the interface after adsorption into the lipid monolayer is briefly discussed. The rate constants for the adsorption and desorption process at the water-monolayer interface have been calculated on the basis of a single-exponential model. The observed difference of these parameters for daunorubicin and adriamycin suggests a different interaction of these anthracyclines during the adsorption to and/or penetration across the phospholipid monolayer.     

Effect of Na+ and Ca2+ Ions on a Lipid Langmuir Monolayer: An Atomistic Description by Molecular Dynamics Simulations

Studying the effect of alkali and alkaline‐earth metal cations on Langmuir monolayers is relevant from biophysical and nanotechnological points of view. In this work, the effect of Na⁺ and Ca²⁺ on a model of an anionic Langmuir lipid monolayer of dimyristoylphosphatidate (DMPA^?) is studied by molecular dynamics simulations. The influence of the type of cation on lipid structure, lipid–lipid interactions, and lipid ordering is analyzed in terms of electrostatic interactions. It is found that for a lipid monolayer in its solid phase, the effect of the cations on the properties of the lipid monolayer can be neglected. The influence of the cations is enhanced for the lipid monolayer in its gas phase, where sodium ions show a high degree of dehydration compared with calcium ions. This loss of hydration shell is partly compensated by the formation of lipid–ion–lipid bridges. This difference is ascribed to the higher charge‐to‐radius ratio q/r for Ca²⁺, which makes ion dehydration less favorable compared to Na⁺. Owing to the different dehydration behavior of sodium and calcium ions, diminished lipid–lipid coordination, lipid–ion coordination, and lipid ordering are observed for Ca²⁺ compared to Na⁺. Furthermore, for both gas and solid phases of the lipid Langmuir monolayers, lipid conformation and ion dehydration across the lipid/water interface are studied.     

Annexin A1 interaction with a zwitterionic phospholipid monolayer: a fluorescence microscopy study

We present the results of a fluorescence microscopy study of the interaction of annexin A1 with dipalmitoylphosphatidylcholine (DPPC) monolayers as a function of the lipid monolayer phase and the pH of the aqueous subphase. We show that annexin A1-DPPC interaction depends strongly on the domain structure of the DPPC monolayer and only weakly on the subphase pH. Annexin A1 is found to be line active, with preferential adsorption at phase boundaries. Also, annexin A1 is found to form networks in the presence of a domain structure in the monolayer. Our results point toward an important contribution of the unique N-terminal domain to the organization of the protein at the interface.     

Influence of environmental conditions on the interfacial organisation of fengycin, a bioactive lipopeptide produced by Bacillus subtilis

The effect of the environmental conditions both on the behaviour of fengycin at the air-aqueous interface and on its interaction with DPPC was studied using surface pressure-area isotherms and AFM. The ionisation state of fengycin is at the origin of its monolayer interfacial properties. The most organised interfacial arrangement is obtained when fengycin behaves as if having zero net charge (pH 2). In a fully ionised state (pH 7.4), the organisation and the stability of fengycin monolayers depend on the ionic strength in the subphase. This can modulate the surface potential of fengycin and consequently the electrostatic repulsions inside the interfacial monolayer, as well as the lipopeptide interaction with the layer of water molecules forming the air-water interface. Intermolecular interactions of fengycin with DPPC are also strongly affected by the ionisation state of lipopeptide and the surface pressure (Pi) of the monolayer. A better miscibility between both interfacial components is observed at pH 2, while negatively charged lipopeptide molecules are segregated from the DPPC phase. A progressive desorption of fengycin from the interface is observed at pH 7.4 when Pi increases while at pH 2, fengycin desorption brutally occurs when Pi rises above Pi value of the intermediate plateau.     

Study of gramicidin A--phospholipid interactions in Langmuir monolayers: analysis of their mechanical, thermodynamical, and electrical properties

The mechanisms of interactions between gramicidin A (gA) and dimyristoylphosphatidylcholine (DMPC) in monolayers formed at the air-water interface were studied by analyzing their mechanical, thermodynamical, and electrical properties evaluated from measurements of pressure-area isotherms and of Maxwell displacement currents (MDC). A contactless method of recording MDC enabled us to monitor changes in the charge state of the monolayer-constituting molecules and to find the relation between a phase state of the monolayer and structural transitions of gA. The peptide-lipid interactions were quantified in terms of the excess of Gibbs free energy, excess entropy, as well as the molecular dipole moments at various gA/DMPC molar ratios, at various temperatures (in the gel phase and also in the liquid-crystalline phase of DMPC molecule), and at various surface pressures. It was found that the strongest interactions between gA and DMPC took place at the gA/DMPC molar ratio at around 0.25. At this monolayer composition, the phospholipids, via their carbonyl moieties, dominantly interact with the single helical gA, which mostly stands upright on the surface and is anchored by its C-terminus to the water surface, and prevent the formation of the intertwined helical gA dimers. The optimum ratio was confirmed also by anomalous electrical behavior of electrical dipole moments derived from MDC measurements.     

Incorporation of blood clotting factor X into phospholipid model membranes: fluorescence microscopy imaging and subphase effects surrounding the lipid phase transition region

Factor X is a blood clotting protein that associates at membrane surfaces to become activated during the coagulation cascade. A molecular level understanding of the protein-membrane phospholipid interactions has not been reached, although it is thought that the protein binds to phospholipids in the presence of calcium through a bridge with the Gla (gamma-carboxyglutamic acid) domain on the protein. In this work, phospholipid Langmuir monolayers have been utilized as model membranes to study factor X association with phospholipid membrane components. Surface pressure measurements indicate that subphase addition of sodium, magnesium, and calcium ions enhances protein penetration of the lipid monolayer, with the largest association found with calcium ions in the subphase. Fluorescence microscopy images collected after protein penetration of lipid monolayers indicate monolayer condensation in the presence of sodium and magnesium ions. Aggregation of lipid domains is induced when calcium is in the subphase, indicating binding-induced flocculation of surface lipid aggregates. Calcium binding to factor X likely causes a conformational change which allows protein-membrane interaction via hydrophobic association with lipid molecules.     

Multivariate data analysis for enhanced interpretation of electrochemical impedance spectra of gramicidin-ion interactions in phospholipid monolayers

This article describes a multifrequency electrochemical impedance study of phospholipid monolayers on a mercury drop electrode in solutions containing electrolytes and gramicidin derivatives: gramicidin A (gA), gramicidin-BOC (g-BOC), and desformylgramicidin (g-des). The impedance spectra have been studied individually (univariate approach) and also transformed using a multivariate data reduction method (multivariate approach). It was shown that the two approaches are complementary. Thus the formation of K+-conducting channels is observed in gA only, and these channels can be distinguished from an interaction of all gramicidin derivatives with Mg2+. An unknown peptide interaction in the monolayer was observed on a slow time scale.     

Scanning electrochemical microscopy as a probe of Ag+ binding kinetics at Langmuir phospholipid monolayers

A new method has been developed for measuring local adsorption rates of metal ions at interfaces based on scanning electrochemical microscopy (SECM). The technique is illustrated with the example of Ag+ binding at Langmuir phospholipid monolayers formed at the water/air interface. Specifically, an inverted 25 microm diameter silver disc ultramicroelectrode (UME) was positioned in the subphase of a Langmuir trough, close to a dipalmitoyl phosphatidic acid (DPPA) monolayer, and used to generate Ag+ via Ag electro-oxidation. The method involved measuring the transient current-time response at the UME when the electrode was switched to a potential to electrogenerate Ag+. Since the Ag+/Ag couple is reversible, the response is highly sensitive to local mass transfer of Ag+ away from the electrode, which, in turn, is governed by the interaction of Ag+ with the monolayer. The methodology has been used to determine the influence of surface pressure on the adsorption of Ag+ ions at a phospholipid (dipalmitoyl phosphatidic acid) Langmuir monolayer. It is shown that the capacity for metal ion adsorption at the monolayer increased as the density of surface adsorption sites increased (by increasing the surface pressure). A model for mass transport and adsorption in this geometry has been developed to explain and characterise the adsorption process.     

The study of the interaction of a model alpha-helical peptide with lipid bilayers and monolayers

We studied the interaction of the alpha-helical peptide acetyl-Lys(2)-Leu(24)-Lys(2)-amide (L(24)) with tethered bilayer lipid membranes (tBLM) and lipid monolayers formed at an air-water interface. The interaction of L(24) with tBLM resulted in adsorption of the peptide to the surface of the bilayer, characterized by a binding constant K(c)=2.4+/-0.6 microM(-1). The peptide L(24) an induced decrease of the elasticity modulus of the tBLM in a direction perpendicular to the membrane surface, E(radial). The decrease of E(radial) with increasing peptide concentration can be connected with a disordering effect of the peptide to the tBLM structure. The pure peptide formed a stable monolayer at the air/water interface. The pressure-area isotherms were characterized by a transition of the peptide monolayer, which probably corresponds of the partial intercalation of the alpha-helixes at higher surface pressure. Interaction of the peptide molecules with lipid monolayers resulted in an increase of the mean molecular area of phospholipids both in the gel and liquid crystalline states. With increasing peptide concentration, the temperature of the phase transition of the monolayer shifted toward lower temperatures. The analysis showed that the peptide-lipid monolayer is not an ideally miscible system and that the peptide molecules form aggregates in the monolayer.     

Metal ion interaction with phosphorylated tyrosine analogue monolayers on gold

Phosphorylated tyrosine analogue molecules (pTyr-PT) were assembled onto gold substrates, and the resulting monolayers were used for metal ion interaction studies. The monolayers were characterized by X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), both prior to and after exposure to metal ions. XPS verified the elemental composition of the molecular adsorbate and the presence of metal ions coordinated to the phosphate groups. Both the angle-dependent XPS and IRAS results were consistent with the change in the structural orientation of the pTyr-PT monolayer upon exposure to metal ions. The differential capacitance of the monolayers upon coordination of the metal ions was evaluated using EIS. These metal ions were found to significantly change the capacitance of the pTyr-PT monolayers in contrast to the nonphosphorylated tyrosine analogue (TPT). CV results showed reduced electrochemical blocking capabilities of the phosphorylated analogue monolayer when exposed to metal ions, supporting the change in the structure of the monolayer observed by XPS and IRAS. The largest change in the structure and interfacial capacitance was observed for aluminum ions, compared to calcium, magnesium, and chromium ions. This type of monolayer shows an excellent capability to coordinate metal ions and has a high potential for use as sensing layers in biochip applications to monitor the presence of metal ions.     

Melittin adsorption and lipid monolayer disruption at liquid-liquid interfaces

Melittin, a membrane-active peptide with antimicrobial activity, was investigated at the interface formed between two immiscible electrolyte solutions (ITIES) supported on a metallic electrode. Ion-transfer voltammetry showed well-defined semi-reversible transfer peaks along with adsorptive peaks. The reversible adsorption of melittin at the liquid-liquid interface is qualitatively discussed from voltammetric data and experimentally confirmed by real-time image analysis of video snapshots. It is also demonstrated that polarization of the water/1,2-DCE interface results in drastic drop shape variations caused by large variations of the interfacial tension. The experimental data also confirmed that maximum adsorption occurs near the ion transfer potential. Finally, the interaction of melittin with a monolayer of L-α-dipalmitoyl phosphatidylcholine (DPPC) was also investigated showing that melittin destabilizes the lipidic monolayer facilitating its desorption. The non-covalent complex formation between melittin and DPPC was confirmed by mass spectrometry.     

Conformational analyses of bacillomycin D, a natural antimicrobial lipopeptide, alone or in interaction with lipid monolayers at the air-water interface

Bacillomycin D is a natural antimicrobial lipopeptide belonging to the iturin family. It is produced by Bacillus subtilis strains. Bacillomycin D is characterized by its strong antifungal and hemolytic properties, due to its interaction with the plasma membrane of sensitive cells. Until now, only few limited analyses were conducted to understand the biological activities of bacillomycin D at the molecular level. Our purpose was to analyze the conformation of bacillomycin D using IR spectroscopy and to model its interactions with cytoplasmic membranes using Langmuir interfacial monolayers. Our findings indicate that bacillomycin D contains turns and allow to model its three-dimensional structure. Bacillomycin D formed a monolayer film at the air-water interface and kept its turn conformation, as shown by polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS). To identify the membrane lipid target of bacillomycin D, its interactions with pure lipid monolayers were analyzed and an original behavior of the lipopeptide toward cholesterol-containing monolayers was shown. This original behavior was lost when bacillomycin D was interacting with pure cholesteryl acetate monolayers, suggesting the involvement of the alcohol group of cholesterol in the lipopeptide-cholesterol interaction.     

Electrochemical modeling of the silica nanoparticle-biomembrane interaction

The interaction of amorphous colloidal silica (SiO(2)) nanoparticles of well-defined sizes with a dioleoyl phosphatidylcholine (DOPC) monolayer on a mercury (Hg) film electrode has been investigated. It was shown using electrochemical methods and microcalorimetry that particles interact with the monolayer, and the electrochemical data shows that the extent of interaction is inversely proportional to the particle size. Scanning electron microscopy (SEM) images of the electrode-supported monolayers following exposure to the particles shows that the nanoparticles bind to the DOPC monolayer irrespective of their size, forming a particle monolayer on the DOPC surface. A one-parameter model was developed to describe the electrochemical results where the fitted parameter is an interfacial layer thickness (3.2 nm). The model is based on the adsorptive interactions operating within this interfacial layer that are independent of the solution pH and solution ionic strength. The evidence implies that the most significant forces determining the interactions are van der Waals in character.     

Action mechanism of water soluble ethanol on phospholipid monolayers using a quartz crystal oscillator

Interaction between phospholipid monolayers (dihexadecyl phosphate: DHP, dipalmitoyl phosphatidyl choline: DPPC) and water soluble ethanol has been studied using quartz crystal microbalance (QCM) method and quartz crystal impedance (QCI) method. The quartz crystal oscillator was attached horizontally on the DHP and DPPC monolayers that were formed on the water surface. At low concentration, increased ethanol concentration decreased the frequency for QCM and increased the resistance for QCI. Both frequency and resistance approached asymptotically to a saturation value. A further increase in ethanol concentration induced a sudden and discontinuous linear change (a decrease in frequency and an increase in resistance). Based on these results, we propose the following action mechanism of ethanol on phospholipid monolayers: at low concentration, the ethanol hydrates adsorb into the monolayer/water interface and saturate on the interface. The monolayer viscosity also increases with the adsorption of hydrates. A further increase in concentration causes multilayer formation of hydrates and/or penetration of hydrates into the monolayer core. The viscosity of the interfacial layer (monolayer and interfacial structured water) changes dramatically according to the action of ethanol hydrates.     

Lipid binding interactions of antimicrobial plant seed defence proteins: puroindoline-a and β-purothionin

The indolines and thionins are basic, amphiphilic and cysteine-rich proteins found in cereals; puroindoline-a (Pin-a) and β-purothionin (β-Pth) are members of these families in wheat (Triticum aestivum). Pin-a and β-Pth have been suggested to play a significant role in seed defence against microbial pathogens, making the interaction of these proteins with model bacterial membranes an area of potential interest. We have examined the binding of these proteins to lipid monolayers composed of 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG) using a combination of neutron reflectometry, Brewster angle microscopy, and infrared spectroscopy. Results showed that both Pin-a and β-Pth interact strongly with condensed phase DPPG monolayers, but the degree of penetration was different. β-Pth was shown to penetrate the lipid acyl chain region of the monolayer and remove lipids from the air/liquid interface during the adsorption process, suggesting this protein may be able to both form membrane spanning ion channels and remove membrane phospholipids in its lytic activity. Conversely, Pin-a was shown to interact mainly with the head-group region of the condensed phase DPPG monolayer and form a 33 ? thick layer below the lipid film. The differences between the interfacial structures formed by these two proteins may be related to the differing composition of the Pin-a and β-Pth hydrophobic regions.