Isotopic exchange reactions between iron-sulphur-nitrosyl clusters and nitrite

The anion [Fe₄S₃(NO)₇]⁻ undergoes slow exchange with labelled nitrite [¹⁵NO₂]⁻ to yield a product [Fe₄S₃(¹⁴NO)(¹⁵NO)₆]⁻ in which complete isotopic exchange has occurred at the basal Fe(NO)₂ groups, but with no exchange at the apical Fe(NO) group. The neutral Fe₄S₄(NO)₄ reacts rapidly with [¹⁵NO₂⁻ to give fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and it is proposed that the conversion proceeds by fragmentation, followed by complete isotopic exchange and rapid reassembly. The binuclear anion [Fe₂S₂(NO)₄]²⁻ also yields, with [¹⁵NO₂]²⁻ in CD₂Cl₂ solution, the fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and a mechanism involving successive fragmentation, exchange and reassembly steps is proposed; however in aqueous solution, a clean exchange reaction occurs to give [Fe₂S₂(¹⁵NO)₄]²⁻. Neutral binuclear esters Fe₂(SR)₂(NO)₄ (R = Me, Et, or Ph) with [¹⁴NO₂]⁻ yield the mononuclear paramagnetic [Fe(¹⁴NO)₂(¹⁴NO₂)₂]⁻, and with [¹⁵NO₂]⁻ the analogous [Fe(¹⁵NO)₂(₁₅NO₂)₂]⁻.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

Synthesis and crystal structure of a novel mixed valence tri-iron complex salt: [hexakis(thiazole)iron(II)][μ-oxo- bis(trichloroiron(III))]

The title compound, [Fe(tz)₆][Fe₂OCl₆] (1) (tz = thiazole) has been synthesized under argon by the reaction of anhydrous FeCl₃ with thiazole in ethanol. 1 crystallises in the cubic space group (no. 205) with a = 15.001(5) Å, V = 3375(2) ų, Z = 4, R = 0.061 and R_w = 0.073. 1 consists of a face-centered cubic array of [Fe(tz)₆]² cations, with the oxo-bridged [Fe₂OCl₆]²⁻ anion occupying the cell and edge centres.     

The reported ion Fe3S2(NO)5: A re-investigation

Salts reported to contain the iron-sulphur cluster nitrosyl anion Fe₃S₂(NO)₅⁻ are shown to be identical with those containing the well-known anion Fe₄S₃(NO)₇⁻.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

Das perfluortriazinium-kation als oxidationsmittel in der metallorganischen synthese—ein neuer weg zur darstellung von [Cp2MCl2](M = Mo

The oxidation of Cp₂MCl₂ (M= Mo, W) with perfluortriazinium tetrafluoroborate, [(FCN)₃F]⁺[BF₄]⁻, in the presence of a flouride ion acceptor (BF₃ or PF₅) in SO₂ solution yielded the cationic metallocene complexes [Cp₂MCl ₂]²⁺[BF₄]⁻ or [C_p2MCl₂] ²⁺[BF₄]⁻[PF₆]⁻ (M = Mo, W), respectively. In these reactions, for the first time the perfluortriazinium cation has proved to be easy to handle and a useful oxidizer in organometallic chemistry. The oxidizer strength of three fluorotriazinium cations, [(XCN)₃F]⁺ (X = F, Cl, H), has been computed ab initio (HF/6 − 31 + G) and calibrated on literature data which were obtained by local density functional calculations. It was anchored to its F⁺ zero point by an experimental value for KrF⁺. ab]Die Oxidation von Cp²MCl₂ mit (M = MO, W) Perfluortriaziniumtetrafluoroborat, [(FCN)₃F]⁺[BF₄]⁻, in Anwesenheit eines Fluoridionenakzeptors (BF₃ oder PF₅) führte in SO₂-Lösung zur Bildung der kationischen Metallocen-Komplexe [Cp₂MCl₂₊]²⁺[BF₄]₂⁻ bzw. [Cp₂MCl₂]²⁺[BF₄]⁻ [PF₆]⁻ (M = Mo, W). In diesen Reaktionen konnte erstmals gezeigt werden, daß Perfluortriazinium-Kationen einfach zu handhabende und nützliche Oxidationsmittel im Bereich der metallorganischen Synthese darstellen. Das (Mdationsvermögen von drei Fluorotriazinium-Kationen, [(XCN)₃F]⁺(X = F, Cl, H), wurde ab initio berechnet (HF/6 − 31 + G) und mit Hilfe von Literaturdaten, die mittels local density functional-Berechnungen erhalten und am experimentellen Wert von KrF ⁺ bezüglich des F⁺ Nullpunktes verankert wurden, kalibriert.     

The synthesis of phosphine derivatives of [Fe4N(CO)12]: Crystal structures of [Fe4N(CO)9(NO)(PPh3)2], [HFe4N (CO)11)PPh3)] and [(PPh3)2N][Fe4N(CO)11(PMe2Ph)]

Phosphines react with butterfly tetranuelear nitrido-iron clusters, [Fe₄N(CO)₁₂]⁻ and [Fe₄N(CO)₁₁(NO)], to give mono- and di-substituted complexes. X-Ray analyses of the title compounds showed that the phosphine ligands are bound to the wing-tip atoms.     

Interaction of heterocyclic thioamides with tellurium(II) and tellurium(IV). Syntheses and crystal structures of bis[2-(2-thioxo-1,3- thiazolidin-3-yl)-4,5-dihydro-1,3- thiazolium]hexabromotellurate(IV) and tris(1- methylimidazole-2-(3H)-thione)tellurium(II) bromide

Reaction of 1,3-thiazolidine-2-thione with tellurium(IV) in hydrobromic acid medium gave the hexabromotellurate, [C₆H₉N₂S₃]₂²⁺[Te^IVBr₆]²⁻ (3). Reaction of 1-methylimidazoline-2-(3H)-thione (L″) with tellurium(IV), in hydrobromic acid medium, gave the mixed-ligand tellurium(II) complex [Te^IIL″₃Br]⁺Br⁻ (4). The structures of [C₆H₉N₂S₃]₂²⁺[Te^IVBr₆]²⁻ (3) and [Te^IIL″₃Br]⁺Br⁻ were determined by single crystal X-ray diffraction methods. In 3 the unit cell contains [TeBr₆]²⁻ anions and two [C₆H₉N₂S₃]⁺ cations. There is no direct bonding between the metal atom and the cations. In the anion only slight angular deviations from the perfect octahedral geometry are observed. The lone pair of electrons on tellurium(IV) is found to be stereochemically inert. In the cation the two five-membered heterocyclic rings adopt different conformations. In complex 4, in the solid state, the planar [Te^IIL″₃Br]⁺ cation and Br⁻ anion are held together by ionic interactions. In the cation, L″ is bonded to the central tellurium atom through the sulphur atom.     

Synthesis and characterisation of the methylene-inserted mixed-chalcogenide compounds Fe2(CO)6(μ-SeCH2Te) and Fe2(CO)6(μ-SCH2Te)

The methylene-bridged, mixed-chalogen compounds Fe₂(CO)₆(μ-SeCH₂Te) (1) and Fe₂(CO)₆(μ-SCH₂Te) (3) have been synthesised from the room temperature reaction of diazomethane with Fe₂(CO)₆(μ-SeTe) and Fe₂(CO)₆(μ-STe), respectively. Compounds 1 and 3 have been characterised by IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy. The structure of 1 has been elucidated by X-ray crystallography. The crystalsare monoclinic,space group P2₁/n, A = 6.695(2), B = 13.993(5), C = 14.007(4)Å, β = 103.03(2)°, V = 1278(7) ų, Z = 4, D_c = 2.599 g cm⁻³ and R = 0.030 (R_w = 0.047).     

Anionic derivatives of pentafluoro-λ-sulfanyl (fluorosulfonyl) acetic acid esters

New ester salts [R₃NH]⁺[F₅SC(SO₂F)C(O)OR′]⁻ where RH, CH₃CH₂ and R′CH₃,(CH₃)₂CH have been prepared from corresponding esters and amines. The sodiumsalt Na[F₅SC(SO₂F)C(O)OCH(CH₃)₂] was used to prepare the following -substitutedderivatives: SF₅CX(SO₂F)C(O)OCH(CH₃)₂, XBr, Cl. The crystal structure of[(C₂H₅)₃NH]⁺[F₅SC(SO₂F)C(O)OCH₃]⁻ was determined and is monoclinic: P2₁/n;a=8.758(2) Å, b=9.645(2) Å and c=19.167(4) Å; β=97.92(3)°; V=1603.6 ų; Z=4.     

Synthesis, structure and non-linear optical property of a copper(II) thiocyanate three-dimensional supramolecular compound

A novel copper(II) thiocyanate complex [Cu(im)₂(NCS)₂] 1 (im=imidazole) has been prepared and characterized by spectroscopic analysis and crystallographic method. This supramolecular compound exhibits a three-dimensional solid state structure constituted by N–HS hydrogen bonds and π–π stacking interactions. The compound in DMF solutions has a very strong third-order non-linear optical (NLO) behavior with absorption coefficient and refractive index ₂=1.18×10⁻¹¹ mw⁻¹, n₂=−9.00×10⁻¹⁶ m²w⁻¹, respectively, and third-order NLO susceptibility χ⁽³⁾ of 7.00×10⁻¹⁰ esu.     

Dinuclear molybdenum complexes derived from diphenols: electrochemical interactions and reduced species

The new diphenolato complexes [{Mo(NO){HB(dmpz)₃}Cl}₂Q] where dmpz = 3,5-dimethylpyrazolyl and Q = OC₆H₄(C₆H₄O (n = 1 or 2), OC₆H₄CR=CRC₆H₄O (R = H or Et), and OC₆H₄CH=CHC₆H₄CH=CHC₆H₄O have been prepared and their electrochemical properties (cyclic and differential pulse voltammetry) compared with previously reported analogues where Q = OC₆H₄O, OC₆H₄EC₆H₄O (E = SO₂, CO and S), OC₆H₄ (CO)C₆H₄ C₆H₄(CO)C₆H₄O and 1,5- and 2,7-O₂C₁₀H₆. The electrochemical interaction between the redox centres in the new complexes is very weak, in contrast to that in the 1,4-benzenediolato and naphthalendiolato species. The EPR spectra of the reduced mixed-valence species [{Mo(NO){HB(dmpz)₃}Cl}₂Q]⁻ where Q = 1,3- and 1,4-OC₆H₄O and OC₆H₄SC₆H₄O shows that they are valence-trapped at room temperature, whereas those of the dianions [{Mo(NO){HB(dmpz)₃}Cl}₂Q]²⁻ where Q = 1,4-OC₆H₄O, OC₆H₄EC₆H₄O (E = CO or S) and OC₆H₄CH=CHC₆H₄CH=CHC₆H₄O shows that the unpaired spins on each molybdenum centre are strongly correlated (J, the spin exchange integral A_Mo, the metal-hyperfine coupling constant). The electrochemical properties and the comproportionation constants for the reaction [{Mo(NO){HB(dmpz)₃} Cl}₂Q] + [{Mo(NO){HB(dmpz)₃}Cl}O]₂]²⁻2[{Mo(NO) {HB(dmpz)₃}Cl}₂Q]⁻ where Q = diphenolato bridge, are compared with related compounds containing benzenediamido and dianilido bridges.     

Electron transfer in organometallic clusters : XI. Redox chemistry of M3(CO)12(M = Ru, Os) and PPh3 derivatives; mechanism of catalysed nucleophilic substitution

The generality of a two-electron reduction process involving an mechanism has been established for M₃(CO)₁₂ and M₃(CO)₁₂−n(PPh₃)_n (M = Ru, Os) clusters in all solvents. Detailed coulometric and spectral studies in CH₂Cl₂ provide strong evidence for the formation of an ‘opened’ M₃(CO)₁₂²⁻ species the triangulo radical anions M₃(CO)₁₂^−· having a half-life of < 10⁻⁶ s in CH₂Cl₂. However, the electrochemical response is sensitive to the presence of water and is concentration dependent. An electrochemical response for “opened” M₃(CO)₁₂²⁻ is only detected at low concentrations < 5 × 10⁻⁴ mol dm⁻³ and under drybox conditions. The electroactive species ground at higher concentrations and in the presence of water M₃(CO)₁₁²⁻ and M₆(CO)₁₈²⁻ were confirmed by a study of the electrochemistry of these anions in CH₂Cl₂; HM₃(CO)₁₁⁻ is not a product. The couple [M₆(CO)₁₈]^−/2− is chemically reversible under certain conditions but oxidation of HM₃(CO)₁₁⁻ is chemically irreversible. Different electrochemical behaviour for Ru₃(CO)₁₂ is found when [PPN][X] (X = OAc⁻, Cl⁻) salts are supporting electrolytes. In these solutions formation of the ultimate electroactive species [μ-C(O)XRu₃(CO)₁₀]⁻ at the electrode is stopped under CO or at low temperatures but Ru₃(CO)₁₂^−· is still trapped by reversible attack by X presumably as [η¹-C(O)XRu₃(CO)₁₁]⁻. It is shown that electrode-initiated electron catalysed substitution of M₃(CO)₁₂ only takes place on the electrochemical timescale when M = Ru, but it is slow, inefficient and non-selective, whereas BPK-initiated nucleophilic substitution of Ru₃(CO)₁₂ is only specific and fast in ether solvents particulary THF. Metal---metal bond cleavage is the most important influence on the rate and specificity of catalytic substitution by electron or [PPN]-initiation. The redox chemistry of M₃(CO)₁₂ clusters (M = Fe, Ru, Os) is a consequence of the relative rates of metal---metal bond dissociation, metal-metal bond strength and ligand dissociation and in many aspects resembles their photochemistry.     

Synthesis and X-ray crystal structures of [Ph2PMe2][(η-C5H4Bu)2Li] and [(η-C5H4Bu)2Yb(Cl)CH2P(Me)Ph2]

The interaction of [(η⁵-C₅H₄Bu^t)₂YbCl · LiCl] with one equivalent of Li[(CH₂) (CH₂)PPh₂] in tetrahydrofuran gave [Ph₂PMe₂][(η⁵-C₅H₄Bu^t)₂Li] (1) and [(η⁵-C₅H₄Bu^t)₂Yb(Cl)CH₂P(Me)Ph₂] (2) in 10% and 30% yields, respectively. 1 could also be prepared in 70% yield from the reaction of [Ph₂PMe₂][CF₃SO₃] with two equivalents of (C₅H₄Bu^t)Li. Both compounds have been fully characterized by analytical, spectroscopic and X-ray diffraction methods. The solid state structure of 1 reveals a sandwich structure for the [(η⁵-C₅H₄Bu^t)₂Li]⁻ anion.     

The coordinatively unsaturated cluster cations [Pt3{M(CO)3}(μ-Ph2PCH2PPh2)3] (M = Re, Mn)

The coordinatively unsaturated cluster [Pt₃(μ₃-CO)(μ-dppm)₃]²⁺ (1, dppm = Ph₂PCH₂PPh₂) reacts with Na⁺[M(CO)₅]⁻ to give the mixed metal clusters [Pt₃{M(CO)₃}(μ-dppm)₃]⁺ (M = Re, 2; Mn, 3). The new clusters are characterized by spectroscopic methods and, for M = Re, by an X-ray structure determination. The Pt₃Re core in 2 is tetrahedral with particularly short metal-metal distances.     

S2 → S0 fluorescence in an aromatic thioketone, xanthione

In addition to the red phosphorescence (T₁(³ A₂n, π^*) → S₀) xanthione exhibits in solution an emission with a maximum at ≈ 23 000 cm⁻¹ and φ_f(298°) = 5 × 10⁻³. It is shown that this emission is fluorescence from the second excited singlet state (S₂ (¹A₁ π, π^*) → S₀).     

Syntheses and X-ray structures of mixed benzenethiolato-sulfido and -selenido trinuclear nickel clusters

The reaction between NiCl₂, NaSPh and NaEH (E = S, Se) in a mixture of acetonitrile and acetone gave trinuclear clusters [Ni₃(μ₃-E)(μ-SPh)₃(SPh)₃]²⁻(E = S, Se) and the previously characterized mononuclear complex [Ni(SPh)₄]²⁻. The X-ray structures of the trinuclear clusters are similar to each other except for the Ni₃E (E = S, Se) sections, and the Ni---E (E = S, E = S, Se) frameworks planes which are condensed via adjacent edges to form planar NiS₄ or NiS₃Se coordination planes which are condensed via adjacent edges to form cyclic systems with a triply bridging sulfido or selenido ion in the centre.     

Metallorganische verbindungen der lanthanoide LVIII. Zur struktur des dicyclopentadienyl-bis(trimethylsilyl)lutetat-anions

(C₅H₅)₂Lu(μ-Cl₂)Na(dme)₂ reacts with LiSi(CH₃)₃ in dimethoxyethane with formation of [Li(dme)₃][(C₅H₅)₂Lu(Si(CH₃)₃)₂]. The crystal structure study shows the compound to consist of discrete ions [Li(dme)₃]⁺ and [(C₅H₅)₂Lu(Si(CH₃)₃)₂]⁻. The compound crystallizes in the space group P2/n with a 14.497(5) b 9.041(2), c 14.672(6) Å, β 103.85(3)° and V 1867(2) ų. The crystal and molecular structure was refined to R = 0.0473 for 2491 observed reflections with F_o 3σ(F_o).     

Preparation and X-ray characterization of two-coordinate Cu(I) complex of aliphatic thiolato ligand: Effect of steric bulk on coordination features

We have synthesized in a single-step procedure from available copper(I) precursor at RT two Cu(I) thiolato clusters of the formula [Cu₄(μ-SCH(CH₃)₂)₆]²⁻ and [Cu₅(μ-SC(CH₃)₃)₆]⁻ as revealed by X-ray crystallography, where increased steric bulk leads to a bigger cage with some two-coordinate metal centers. In addition, we identified a mononuclear two coordinate thiolato complex with the bulkier ligand, of the formula NEt₄[Cu(SC(CH₃)₃)₂]. This is only the second example of such a complex of an aliphatic ligand that is structurally characterized. The X-ray structure reveals an S–Cu–S angle of 176.7–179.5°, with Cu–S distances of 2.14 Å.     

The reaction of tetrahydridododecacarbonyltetrarhenium(0) with pyridine and some nitrogen-containing bases

The reactions of H₄Re₄(CO)₁₂ with some nitrogen-containing bases L in chloroform at room temperature were investigated. For L = pyridine, γ-picoline and piperidine, two types of products, namely [H₄Re₃(CO)₉L]⁻[LH]⁺ and H₃Re₃(CO)₉L₃, were isolated. When L = -picoline, 4-CN-pyridine, imidazole or 2,4-dimethylimidazole, [H₄Re₃(CO)₉L]⁻[LH]⁺ is the only product with a yield close to 75%. The structure of H₃Re₃(CO)₉L₃ (L = pyridine) (1) and [H₄Re₃(CO)₉L]⁻[LH]⁺ (L = -picoline) (3) were determined by the X-ray diffraction method. For 1, the three rhenium atoms form an equilateral triangle with edge-bridging hydrides. Each rhenium is coordinated by three carbonyl groups and an axial pyridine. The three pyridines are not all on the same side of the triangular plane to reduce the steric repulsion which is obvious from bond angles and distances data. In 3, the three rhenium atoms form an isosceles with two hydride-bridged Re---Re single bonds and an Re---Re double bond bridged by two hydrides. Each rhenium is coordinated by three CO groups, and -picoline is coordinated to rhenium in the axial position.