Quantitative analysis of polymer additives in low density polyethylene using supercritical fluid extraction/supercritical fluid chromatography

Analysis of low concentration polymer additives has been a challenging problem. The commonly used methods of analysis involve the initial extraction of polymer additives with solvents, often in a Soxhlet apparatus, followed by liquid, size exclusion, or gas chromatography. This paper describes the on-line super-critical fluid extraction (SFE)-supercritical fluid chromatographic (SFC) determination of different additives from low density polyethylene. Cryogenic collection was used as an interface between SFE and SFC to focus the extraction eluate before transfer to an analytical SFC column for quantitative analysis.     

Supercritical fluid extraction of atrazine and its metabolites from soil

Soxhlet (methanol) and SFE extraction with carbon dioxide in the presence of modifiers at different temperatures (100–200°C) for the extraction of atrazine and its main metabolites from a soil sample were compared. The most effective extraction conditions for both atrazine and its metabolites (i.e. deethylatrazine and deisopropylatrazine) were Co₂ modified with 20% molar methanol-trifluoroacetic acid (MeOH-TFA) (TFA 0.65M in MeOH) at 100°C, leading to an extraction efficiency comparable with that of Soxhlet extraction with MeOH for atrazine and ca. 20% higher for its main metabolites. The relative standard deviation (RSD) of SFE was lower than that obtained by Soxhlet extraction, probably because of less interference in the cGC-NPD determination. All the other modifiers evaluated (acetone, triethylamine, and methanol) were less effective than MeOH-TFA for the extraction of atrazine and its metabolites from a soil sample, even at high molar concentrations (20%) and use of higher extraction temperatures (200°C). These results indicate the importance of matrix effects and the need of the selection of an appropriate modifier in order to obtain quantitative extractions by SFE.     

On-line enzymatic reaction,extraction, and chromatography of fatty acids and triglycerides with supercritical carbon dioxide

Supercritical carbon dioxide can be utilized both as an introduction solvent in capillary SFC and as a reaction medium; both possibilities are illustrated in this study. An off-line SFE unit was modified for on-line SFE-SFC. To facilitate rapid depressurization of the extraction cell and to prevent memory effects, a 6-port valve was installed at the outlet line of the extraction unit. An increased background signal was obtained when PEEK polymer was used in the construction of the extraction vessel; when stainless steel was used, the blanks improved. The synthesis of methyl esters and butyl esters of fatty acids from triglycerides in edible fat was examined using an immobilized lipase as a catalyst in on-line SFE-SFC. As a result of 30 minutes reaction – extraction time, high yields of fatty acid esters were obtained at a pressure of 150 bar and a temperature of 50°C.     

Effect of temperature,collection mode,and modifier on the supercritical CO2 extraction of dicofol residues from fish samples

Toxicity evaluation of Dicofol to Astyanax bimaculatus schubarti, a characteristic fish species living in tropical rivers and lakes was carried out through LC₅₀ – 96 Hours. These experiments were performed under laboratory controlled conditions with atmospheric air flow and dilution water at 25°C in the static mode, supercritical fluid extraction (SFE) with pure CO₂ and CO₂ modified with hexane and methanol were used at 50, 70, 80, and 100°C and 300 atm. Several collection modes were studied to extract Dicofol from fish samples. The extraction efficiencies were directly comparedd with those obtained after 8 h of Soxhlet extraction using the same clean-up with Florisil and analysis by HRGC/ECD and HRGC/MS as a confirmatory analytical technique. The SFE recoveries at temperatures lower than 80°C were typically lower than soxhlet recoveries; however a temperature increase enhanced the efficiency of SFE. The results showed that under certain conditions, supercritical fluid gave higher extractio power (extracted 11 % more pesticide), shorter extraction time, and lower solvent consumption than Soxhlet, thus affording an excellent alternative to the conventional method for extracting Dicofol from fish sample.     

Development of a method for the rapid determination of pentachlorophenol in leather using supercritical fluid extraction with in situ derivatization

Pentachlorophenol (PCP) was extracted from leather with supercritical carbon dioxide and in situ acetylated under static SFE conditions in the presence of triethylamine. During the dynamic extraction step, the derivatives were removed from the matrix and collected with either a pure liquid (light petroleum) or a liquid-solid (light petroleum-solid sorbent (C18, alumina, Florisil or Celite)) trap. To prevent restrictor plugging, a suitable restrictor was designed. The clean-up of the extracts was optimized in this study. Different internal standards were tested and it was shown that not all of them were usable. The SFE results were compared with those obtained by Soxhlet extraction with methanol. With SFE instead of conventional Soxhlet extraction, the overall time required for determination of PCP in leather can be reduced from about 2 days to approx. 3 hours.     

On-line coupled supercritical fluid extraction and chromatography for the determination of thiolcarbamate herbicides in soil matrix

Supercritical fluid extraction (SFE) was on-line coupled with supercritical fluid chromatography (SFC) for the determination of thiolcarbamate herbicides in soil matrix. Inert ODS-silica gel packings were used as a trap column for an interface between SFE and SFC and as an analytical column for the satisfactory separation of extracts. Thiolcarbamate herbicides could be extracted satisfactorily from the soil matrix, which had different characteristics. The results indicated that the proposed system was useful for the rapid determination of thiolcarbamate herbicides in soil matrices.     

超临界流体色谱在金属络合物和金属有机化合物中的分析应用

超临界流体色谱（SFC）在色谱分离过程中能在较低的温度下分析对热不稳定性的化合物,包括金属络合物和金属有机化合物。本文总结了近来文献报道的各种过渡金属、重金属、镧系和锕系以及铅、汞和锡的金属有机化合物的SFC分离,还讨论了SFC检测系统和金属有机化合物的溶解度的测定。     

Application of supercritical fluid extraction and supercritical fluid chromatography to the production of taxanes as anti-cancer drugs

The supercritical fluid extraction (SFE) of taxicin from the dried needles of the English yew tree, Taxus baccata is described. Analysis by supercritical fluid chromatography (SFC) and proton NMR spectroscopy was used to confirm identity and purity. The extraction efficiency of SFE is comparable with that obtained using liquid solvents. Such taxanes may be used semi-synthetically to prepare potential anti-cancer drugs.     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

Liquid crystal stationary phases for gas chromatography and supercritical fluid chromatography

Novel monomeric and polymeric liquid crystalline compounds were synthesized as stationary phases for gas chromatography (GC) and supercritical fluid chromatography (SFC). Monomeric liquid crystalline compounds were used in packed column gas chromatography for the separation of isomeric aromatic compounds and insect sex pheromones. Liquid crystalline polymers possess long nematic ranges and a uniform coating was easily achieved in glass and fused silica capillaries, which could stand temperatures up to 250°C in GC and pressures of 200 MPa at 160°C in SFC. The columns provide excellent selectivity and resolution for fused ring aromatic compounds such as the isomers anthracene and phenanthrene or triphenylene and chrysene.     

GC-MS of volatile components of Schisandra chinensis obtained by supercritical fluid and conventional extraction

In this paper, the volatile compounds of Schisandra chinensis obtained by different extraction techniques including supercritical fluid extraction (SFE), steam distillation (SD), Soxhlet extraction (SE) and ultrasound-assisted extraction (UAE) were investigated for the first time. The sample preparation procedure for GC-MS analysis of the volatile compounds was optimized and then 37, 45, 27 and 37 compounds were identified in the samples obtained by SFE, SD, SE and UAE methods, respectively. As the therapeutic effect of the traditional Chinese medicine is usually based on multifarious essential components or the combination of them instead of only one component, the volatile compounds were compared in groups with the extracts by SE, SD and UAE. This would be more reasonable to evaluate the effects of an alternative technique to extracting multifarious essential components. Among the identified components in the SFE extract, 32 compounds were the same as that by three conventional methods, accounting for 90.5% of the volatile compounds identified. However, as the volatile compounds were classed into groups, it was easy to see that the Schisandra chinensis oil extracted by SFE was made up largely of aromatics and sesquiterpenoids (52.1 and 27.6%, respectively), with less amounts of monoterpenoids and other compounds, distinguishing SFE from the conventional extractions.     

Coupled SFE/SFC/GC for the trace analysis of pesticide residues in fatty food samples

An on-line SFE-chromatographic system, where SFE has been coupled with SFC and GC, was developed and utilized for trace analyses of organochlorine and organophosphorus pesticide residues from gram-sized complex sample matrices, such as chicken fat, ground beef, and lard. The SFE process and chromatographic techniques were instrumentally integrated for efficient and automated on-line analysis, having minimal sample handling between the sample preparation and separation steps. A cleanup step, incorporating packed column SFC, allowed the fractionation of relatively small-sized, non-polar pesticides from the co-extracted fatty materials. This permitted final high-resolution separation of analytes on a capillary GC column. Detection of pesticides was accomplished using selective electron-capture and nitrogen-phosphorus detectors. Pesticide concentrations determined with the on-line system were accurate and reproducible, for fatty samples containing both fortified and incurred pesticides. This method, utilizing supercritical carbon dioxide, was considerably faster and less laborious than the conventional analytical procedures based on liquid extraction.     

Determining PCB desorption behaviour on sediments with SFE and investigating the dependency of selective fractions on sediment characteristics

A method for studying PCB desorption behaviour from sediments using supercritical fluid extraction (SFE) and pressurized liquid extraction (PLE) is presented. Four sediments were investigated and extracted with supercritical carbon dioxide employing increasingly harsher extraction conditions ranging from 40°C and 12?MPa to 100°C and 36.5?MPa. To ensure quantitative extractions, the remaining SFE residues were also extracted with PLE. Resulting profiles identified at least three different PCB fractions within the four sediments. Furthermore, a distinct fraction was obtained with extraction for 2?h at 40°C and 36.5?MPa. This fraction has previously been found to correlate well with bioavailable fractions. The dependency of this fraction on sediment total organic carbon (TOC) was investigated, both for sediments examined in this study as well as for previously reported values using the same extraction conditions. It was found that TOC does not correlate to selective SFE, which indicates that the use of TOC to predict bioavailability is questionable.     

Optimization of supercritical fluid extraction of saikosaponins from Bupleurum falcatum with orthogonal array design

Supercritical fluid extraction (SFE) was used to extract saikosaponins a, c and d from the root of Bupleurum falcatum. An orthogonal array design L₉(3)⁴ was employed as a chemometric method for the optimization of the SFE conditions. The effects of four factors including pressure (30–40 MPa), temperature (40–50°C), ethanol concentration (60–100%) and time (2.5–3.5 h) on the yields of saikosaponins were investigated by a preparative SFE system in the SFE mode. Under the optimized conditions, namely 35 MPa of pressure, 45°C of temperature, 80% of ethanol concentration and 3.0 h of time, the yields of saikosaponin c, saikosaponin a, saikosaponin d, total saikosaponins and SFE extract were 0.16, 0.12, 0.96, 1.24 and 16.48 mg/g, respectively. Determinations of the saikosaponins were performed by HPLC.     

Separation and quantification of components of edible fat utilizing open tubular columns in SFC. Sample introduction by direct injection and SFE coupled on-line to SFC

Summary Geometric isomers of fatty acids were separated by open tubular columns in SFC. The concentration of the analytes varied between 9 and 16 μg mL⁻¹. Quantification of triglycerides with repeatability better than 20% were obtained in a home made SFE-SFC unit. A four point calibration curve for both trimyristin and tripalmitin was developed with correlation coefficients of 0.998 and 0.9998, respectively. The limit of quantification was approximately 3 ng for both components. Supercritical CO₂ as extraction solvent in matrix containing lipids increased the recovery of cholesterol by a factor of three. Using immobilized lipase in on-line SFE-SFC quantification of cholesterol in spray dried egg yolk was possible.     

SFE of PAHs from soils with a high carbon content and analyte collection via combined liquid/solid trapping

Polynuclear aromatic hydrocarbons (PAHs) are recovered from a soil with a high carbon content (ca. 50%) with supercritical fluid extraction (SFE) as well as with conventional Soxhlet extraction. The influence of temperature and modifier volume on SFE efficiency and the effect of a combined liquid/solid trap for analyte collection are investigated in this study. Such traps, which make analyte collection and clean-up possible in one step, are compared with conventional analyte collection in pure organic solvents. A comparison between reproducibility and efficiency of SFE and Soxhlet extraction is presented.     

Comparison of supercritical fluid and Soxhlet extractions for the isolation of nitro compounds from soils

Supercritical fluid extraction (SFE) with CO(2), a clean and rapid alternative to conventional Soxhlet extraction, was investigated for the extraction of nitro compounds from soil samples. Quantitative extraction by SFE was accomplished at a pressure of 25 MPa and an extraction temperature of 60 degrees C, for 30 min in dynamic mode and using acetonitrile as modifier, and the results were comparable with those obtained by acetonitrile Soxhlet extraction (3 h) for all soil samples. Extracts from these two procedures were analyzed by gas chromatography coupled with mass spectrometry. Quantitative reproducibility for SFE extracts was acceptable (RSD 2-10%), and the quantity of solvent was reduced from 160 mL for Soxhlet extraction to 5 mL in the case of SFE.     

Solvent-assisted supercritical fluid extraction for the isolation of semivolatile flavor compounds from the cinnamons of commerce and their separation by series-coupled column gas chromatography

Solvent-assisted supercritical fluid extraction is superior to Soxhlet extraction, solvent extraction at reflux, and simultaneous setam distillation solvent extraction for the isolation of semivolatile compounds from the cinnamons of commerce. Optimized extraction conditions are described using carbon dioxide at 300 atm and 70°C to extract 0.5 g of powdered cinnamon mixed with 4.5 g of anhydrous sodium sulfate to which 1.0 ml of acetonitrile was added at the start of the sequential 30 min static and 30 min dynamic extraction. The semivolatile compounds were collected by solvent trapping in ethyl acetate and analyzed directly by series coupled-column gas chromatography after filtration and partial solvent evaporation. Twenty-one compounds identified by mass spectrometry were quantified in twenty-four samples of cinnamon and cassia purchased in Sri Lanka, Korea, United Kingdom, and the United States of America. True cinnamon is easily distinguished from cassia by the presence of eugenol, absence of δ-cadinene, much lower amounts of coumarin, and larger amounts of benzyl benzoate. Principal component analysis using the relative composition of the twelve major semivolatile compounds provides a clear distinction between true cinnamon and cassia as well as useful interspecies differences which can be used for further classification.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.     

Supercritical Carbon Dioxide Extraction of Salidroside from Rhodiola rosea L var. rosea Root

Salidroside from the root of Rhodiola rosea L var. rosea was extracted by supercritical carbon dioxide with and without methanol as modifier. Three parameters, i.e. temperature, pressure and different concentrations of methanol were optimized. Salidroside determinations were carried out using high‐performance liquid chromatography (HPLC) with UV‐Vis detector. An experimental design of response surface methodology (RSM) was used to map the effect of pressure (at 200, 300 and 400 bar), temperature (at 50, 60 and 70 °C) and percentage of methanol modifier (at 80, 90 and 100%) on the extraction yield of the active compound and to determine the optimal conditions for the extraction of salidroside from the root of plant. The results showed that supercritical carbon dioxide failed to extract salidroside from the plant material without a methanol as modifier. The yield obtained after 1.5 h extraction with the rate of modifier 0.4 mL/min and 300 bar, 70 °C, and 80 percent of methanol modifier condition was the highest (17.15 mg/g). The optimum conditions were 70 °C, 295.49 bar and 80 percent of methanol as modifier with the yield of 16.17 mg/g. In addition, the yield obtained with supercritical fluid extraction (SFE) was compared with the Soxhlet extraction, whose yield was 8.64 mg/g.