Qualitative supercritical fluid extraction coupled to capillary gas chromatography

The usefulness and ease of utilizing supercritical fluid extraction (SFE) directly coupled to capillary gas chromatography (GC) as quantitative or qualitative analytical problem-solving tools will be demonstrated. As an alternative to conventional liquid solvent extractions, SFE presents itself as a means to achieve high extraction efficiencies of different compounds in complex solid matrices in very rapid tims frames. Moreover, SFE has an additional advantage of being able to achieve distinct extraction selectivities as a function of the solubilizing power of the supercritical fluid extracting phase. For on-line SFE/GC, the extraction effluent is directly transferred to the analytical chromatograph. On-line SFE/GC involves the decompression of pressurized extraction effluent directly into a heated, unmodified capillary split injection port of the GC. In this respect, SFE introduction into GC can be used as an alternative means of GC injection, comparable to such modes of injection as pyrolysis and thermal desorption. This paper will show applications of SFE/GC where mass spectrometric detection together with flame ionization detection was used for component identification from environmental, tobacco, and petroleum matrices.     

Supercritical fluid extraction in plant essential and volatile oil analysis

The use of supercritical fluids, especially carbon dioxide, in the extraction of plant volatile components has increased during two last decades due to the expected advantages of the supercritical extraction process. Supercritical fluid extraction (SFE) is a rapid, selective and convenient method for sample preparation prior to the analysis of compounds in the volatile product of plant matrices. Also, SFE is a simple, inexpensive, fast, effective and virtually solvent-free sample pretreatment technique. This review provides a detailed and updated discussion of the developments, modes and applications of SFE in the isolation of essential oils from plant matrices. SFE is usually performed with pure or modified carbon dioxide, which facilitates off-line collection of extracts and on-line coupling with other analytical methods such as gas, liquid and supercritical fluid chromatography. In this review, we showed that a number of factors influence extraction yields, these being solubility of the solute in the fluid, diffusion through the matrix and collection process. Finally, SFE has been compared with conventional extraction methods in terms of selectivity, rapidity, cleanliness and possibility of manipulating the composition of the extract.     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

Dry ice-originated supercritical and liquid carbon dioxide extraction of organic pollutants from environmental samples

Packed in a high-pressure vessel and under calculated conditions, dry ice can be used as a source of carbon dioxide for supercritical CO₂ extraction or liquid CO₂ of organic compounds from environmental samples. Coupled with a fluid modifier such as toluene, dry ice-originated supercritical CO₂ (Sc CO₂) achieves quantitative extraction of many volatile organic compounds (VOCs) and semivolatile organic compounds (SOCs) including polycyclic aromatic hydrocarbons (PAHs), n-alkanes, and polychlorinated biphenyls (PCBs) from solid matrices. Compared to contemporary manual or automated supercritical fluid extraction (SFE) technologies, this novel technique simplifies SFE to a minimum requirement by eliminating the need of a high-pressure pump and any electrical peripherals associated with it. This technique is highly suitable to analytical areas where sample preservation is essential but difficult in the sampling field, or where sample collection, sample preparation, and analysis are to be done in the field.     

Direct coupling of CO2 fluid extraction with capillary supercritical fluid chromatography

Summary An interface described in the literature was modified to accommodate small sample quantities. The simple and inexpensive method can be used to obtain rapid qualitative sample information of complex matrices by extraction in sub- or supercritical conditions (SFE) with a concurrent separation by capillary supercritical fluid chromatography (CSFC). Compared to traditional solvent extraction methods the potential for analyte degradation and contamination is minimized resulting in reduced sample amount necessary for extraction and separation, and also in faster extractions. Complex matrices of a plastic material, a natural product and a soil spiked with a substituted hydrocarbon test mixture were analyzed to show the usefulness of the interface.     

Extraction of chromium(III) and chromium(VI) species from solid matrices using green solvent supercritical carbon dioxide.

Supercritical fluid extraction (SFE) provides an environmentally green technique to decontaminate chromium species from solid matrices using supercritical fluid carbon dioxide (ScCO2). Methanol and a small amount of water were found to significantly improve the extraction efficiency. The fluorinated chelating agent lithium bis(trifluoroethyl)-dithiocarbamate (LiFDDC) was effective in removing Cr ions in methanol-modified CO2 via in situ chelation/SFE technique. This paper indicates that the extraction efficiencies of Cr(III) and Cr(VI) from solid matrices can be greatly increased to more than 92% in the presence of a small amount of water, using 5% methanol-modified CO2 containing LiFDDC as an extractant. Chromium species in a wood waste sample in the form of chromated copper arsenate (CCA) can be extracted, but the extraction efficiency is not as good as expected, possibly due to the complications of the chemistry of Cr species in different oxidation states and to matrix effects.     

Monitoring polychlorinated biphenyls in pine needles using supercritical fluid extraction as a pretreatment method

This paper reports on the first use of supercritical fluid extraction (SFE) of polychlorinated biphenyls (PCBs) from pine needles. Supercritical carbon dioxide was used as extraction fluid, and exhibited good extraction efficiencies and recoveries (>90%). GC-MS (selected ion monitoring mode) achieved both accurate identification and quantification of the PCBs. Compared with traditional time consuming multi-step sample preparation methods, SFE with carbon dioxide is easier to perform, and is a feasible alternative extraction procedure for the monitoring of PCBs in pine needle samples.     

A Unified Sample Preparation System for Extraction of Various Analyte/Matrix Combinations

A supercritical fluid extraction/enhanced solvent extraction system (SFE/ESE) was used to remove polar and non-polar analytes from various matrices. Extraction of environmental pollutants from soil, additives from low density polyethylene, sulfa drugs from animal tissue, and drug from tablet was performed using both SFE and ESE. Results showed that a single instrumental system can be used to perform both ESE with organic solvents and SFE with carbon dioxide-based fluids. Each method has its own unique advantages and applications. The ability to carry out both solvent extraction and supercritical fluid extraction with one system has obvious economical advantages.     

离线超临界流体萃取和气相色谱-红外-质谱联用测定水中有机污染物

利用吸附剂ＧＤＸ－３０１对黄河水中的有机污染物富集并以超临界ＣＯ２脱附后,通过气相色谱、色谱－红外－质谱联用技术对各目标分析物逐一定性,并比较了超临界ＣＯ２萃取和溶剂洗脱的结果。实验表明,在２０ＭＰａ,６０℃,４０ｍｉｎ条件下进行超临界ＣＯ２萃取时的萃取效率和溶剂萃取效率相当或略高。     

Applications of supercritical fluid extraction (SFE) of palm oil and oil from natural sources

Supercritical fluid extraction (SFE), which has received much interest in its use and further development for industrial applications, is a method that offers some advantages over conventional methods, especially for the palm oil industry. SC-CO? refers to supercritical fluid extraction (SFE) that uses carbon dioxide (CO?) as a solvent which is a nontoxic, inexpensive, nonflammable, and nonpolluting supercritical fluid solvent for the extraction of natural products. Almost 100% oil can be extracted and it is regarded as safe, with organic solvent-free extracts having superior organoleptic profiles. The palm oil industry is one of the major industries in Malaysia that provides a major contribution to the national income. Malaysia is the second largest palm oil and palm kernel oil producer in the World. This paper reviews advances in applications of supercritical carbon dioxide (SC-CO?) extraction of oils from natural sources, in particular palm oil, minor constituents in palm oil, producing fractionated, refined, bleached, and deodorized palm oil, palm kernel oil and purified fatty acid fractions commendable for downstream uses as in toiletries and confectionaries.     

Supercritical fluid extraction of kava lactones from Piper methysticum (kava) herb

Supercritical fluid extraction of kava lactones from Piper methysticum Forst. herb is described here. The extraction was performed with supercritical carbon dioxide alone and supercritical carbon dioxide modified with 15% ethanol, and the extracts were analyzed by gas chromatography/mass spectrometry. Seven lactones including: 7,8-dihydrokavain; kavain; 5,6-dehydrokavain; 5, 6, 7, 8-tetrahydroyangonin; dihydromethysticin; yangonin; and methysticin were the major constituents in the SFE extract.     

Mass balance of metal species in supercritical fluid extraction using sodium diethyldithiocarbamate and dibutylammonium dibutyldithiocarbamate.

The objective of this work is to track the amount of metal complexes distributed in the extraction cell, collection vial, and tubing used in supercritical fluid extraction (SFE) systems after progressive removal of metal ions in supercritical carbon dioxide (SC-CO2). Sodium diethyldithiocarbamate (NaDDC) and dibutylammonium dibutyldithiocarbamate (DBDC) ligands were used to form complexes with Cd, Cu, Pb, and Zn and CO(2)/5% methanol as a supercritical fluid. The mass balance of metal complexes were obtained before and after extraction, and metals in different locations in the system were flushed out using an organic solvent and nitric acid (HNO3). These results infer that the stability constant (beta) of the metal-ligand complex has a strong correlation with SFE. Because of the composition of the stainless-steel cell, Fe, Cr, and Ni or other trace elements in the cell might interfere with the mass balance of metal complexes in SFE due to an exchange mechanism taking place between the cell and the sample.     

Determination of additives in cosmetics by supercritical fluid extraction on-line headspace solid-phase microextraction combined with gas chromatography-mass spectrometry

A new hyphenated technique couples supercritical fluid extraction in situ derivatization and on-line headspace solid-phase microextraction to gas chromatography-mass spectrometry (SFE in situ derivatization on-line HS-SPME-GC-MS) for the determination of paraben preservatives and polyphenolic antioxidants in cosmetics. The preservatives and antioxidants were extracted from the cosmetic matrices with supercritical carbon dioxide at a pressure of 13,840 kPa. The supercritical fluid extraction was performed at 55 °C for 10 min of static extraction then 15 min of dynamic extraction. The extractant subsequently was derivatized in situ with the silylation reagent N,O-bis(trimethylsilyl)trifluoroacetamide with 0.1% trimethylchlorosilane. The product was then adsorbed on a polyacrylate solid-phase microextraction (SPME) fiber in the headspace. Sea sand was used as a dispersive material in the SFE step. The analytical linear ranges for the preservatives and antioxidants were found to be from 10 to 1000 ng g⁻¹ with RSD values below 7.8%. The detection limits ranged from 0.5 to 8.3 ng g⁻¹. These results are better than those obtained by using only SPME or SFE for trace preservatives and antioxidants analysis in cosmetic matrices. The new method was successfully utilized to determine the amounts of preservatives and antioxidants in real cosmetics without the need for tedious pretreatments.     

Pesticide multiresidue analysis of 303 compounds using supercritical fluid extraction.

Compared to generally used solvent extraction methods, supercritical fluid extraction (SFE) with carbon dioxide has the advantages of automation and simple operation in preparing samples for pesticide residue analysis. This report is the outcome of our evaluation of the practicality of SFE for the preparation of samples for pesticide residue analysis. We studied the recovery of 303 compounds with several crops by a simultaneous analytical method of SFE, cartridge column purification, followed by GC/MS determination. We achieved 70 to 120% recovery for more than 80% of the examined compounds.     

Extraction of essential oil from Pimpinella anisum using supercritical carbon dioxide and comparison with hydrodistillation

Supercritical fluid extraction (SFE) of essential oil from Pimpinella anisum, using carbon dioxide as a solvent is presented in this work. An orthogonal array design OA9 (3(4)) was applied to select the optimum extraction condition. The effects of pressure, temperature, dynamic extraction time and methanol volume on the extraction efficiency were investigated by the three-level orthogonal array design. Results show that pressure has a significant effect on the extraction efficiency. The extract obtained from P. anisum by using supercritical fluid extraction was compared with the essential oil obtained by hydrodistillation, considering both quantity and quality of the product. SFE products were found to be of markedly different composition, compared with the corresponding hydrodistilated oil. The total amount of extractable substances obtained in SFE (7.5%) is higher than that obtained by hydrodistillation (3.1%) and SFE is faster than hydrodistillation method.     

Supercritical fluid extraction of polychlorinated biphenyls and pesticides from soil. Comparison with other extraction methods.

A comparison is made of supercritical fluid extraction (SFE) with two other techniques widely used for the extraction of polychlorinated biphenyls (PCBs) and organochlorine pesticides in soil. Extraction conditions for the SFE of PCBs and pesticides were first determined. An experimental approach was set up to determine the influence of different extraction parameters such as pressure, extraction time, static and dynamic extraction, restrictor type and collection solvent for off-line SFE. The use of carbon dioxide at 50 degrees C and 20 MPa, 10 min static followed by 20 min dynamic extraction with collection in iso-octane were been found to be the optimum conditions. Two types of soil, with a low and high content of organic carbon, respectively, spiked with 16 PCBs and organochlorine pesticides with a wide range of volatility and polarity at a level of 5 ng/g dry matter, were used as test materials. Conventional solvent extraction gives a good extraction yield for soil with a low content of organic carbon, but for peat soil the recoveries decrease dramatically to 30% for DDE, DDT and PCB 138 and 153. The recoveries with Soxhlet extraction are good, but an extra clean-up step before analysis is necessary. SFE gives good extraction yields for PCBs and organochlorine pesticides, varying between 85 and 105% with a reproducibility of 5% for each component for both types of soil. SFE is a fast, clean and reproducible method for the extraction of PCBs and organochlorine pesticides from these two soil matrices.     

Supercritical fluid extraction and liquid chromatography-electrospray mass analysis of vinblastine from Catharanthus roseus

Supercritical fluid extraction using carbon dioxide modified with methanol, methanol-diethylamine, or methanol-triethylamine was used to extract vinblastine from the aerial portions of Catharanthus roseus. An HPLC-electrospray ionization (ESI)/MS analysis method was also developed to quantify the alkaloids in these extracts. Of the supercritical solvents evaluated, carbon dioxide-methanol-triethylamine (80 : 18 : 2) at 80 degrees C and 34.0 MPa greatly improved the supercritical fluid extraction (SFE) yield of vinblastine by as much as 76.4% over methanol extraction, while the other solvent conditions extracted the compound at yields less than 25% that of a methanol extraction. These results were confirmed by the robust HPLC-ESI/MS analytical method developed in this study.     

Improved SFE recovery of trace analytes from liver using an integral micrometering valve–SPE column holder assembly

A novel integral restrictor–collector has been designed for use with a conventional supercritical fluid extraction (SFE) apparatus. The assembly reduces the path length between a micrometering valve and collector (a solid phase extraction (SPE) column), obviating the need for the complicated tubing and connectors usually associated with such devices. Also described is a heating-block assembly which encases the micrometering valve and provides uniform heating of the valve during extraction. The valve–SPE column assembly was part of a system used to perform the first reported SFE multi-residue drug recovery from fortified liver. Extractions used carbon dioxide pressurized to 690 bar as the supercritical fluid. Flow rates of expanded gas through the SPE columns were 3–4 L/min with concomitant quantitative trapping of the analytes on the sorbent bed. After SFE the three nitrobenzamide antimicrobial drug residues from the liver were eluted from the SPE columns by off-line analysis. The results demonstrated that losses of trace level analytes in tissue may be significantly reduced by including an integral metering valve-collector assembly as part of the SFE apparatus.     

Analysis of volatiles in polymers,part II. Supercritical fluid extraction/open tubular GC/MS

Summary Supercritical fluid extraction (SFE) connected to open tubular gas chromatography has been used for the analysis of non-polar to medium polar volatiles entrained in polymers. This polymer sheets, prepared with the aid of a microtome, have been extracted with supercritical carbon dioxide. The influence of sample area/weight ratio and extraction cell volume on the SFE performance has been investigated. Further, quantitative analysis was executed by stepwise extractions.A set of polybutylene terephthalate polymers, originating from different manufactures, has been analysed regarding entrained volatiles.     

Evaluation of dithiocarbamates and beta-diketones as chelating agents in supercritical fluid extraction of Cd, Pb, and Hg from solid samples

The use of four dithiocarbamates and three fluorinated β-diketones as potential chelating agents for three transition metal ions (Cd²⁺, Pb²⁺, and Hg²⁺) extracted from spiked sand and filter paper samples by supercritical fluid extraction (SFE) was investigated. The extractions were performed at 45°C and 250 atm for spiked sand samples and at 60°C and 200 atm for filter paper samples using supercritical carbon dioxide modified with 5% methanol. At 250 atm and using carbon dioxide modified with 5% methanol, the recoveries of Cd²⁺, Pb²⁺, and Hg²⁺ ions from spiked sand samples were 95% with lithium bis(trifluoroethyl)dithiocarbamate (LiFDDC) as the chelating agent; they ranged from 83–97% with diethylammonium diethyldithiocarbamate and from 87–97% with sodium di-ethyldithiocarbamate as chelating agents, and from 68–96% with trifluoracetylacetone, hexafluoroacetylacetone, and thenoylfluoroacetone as chelating agents. Ammonium pyrrolidinedithiocarbamate was not effective in the chelation SFE of Cd²⁺, Pb²⁺, and Hg²⁺ ions from either spiked sand or spiked filter paper samples under the extraction conditions used. Supercritical carbon dioxide alone gave consistently lower analyte recoveries than supercritical carbon dioxide modified with 5% methanol. The results suggest that the solubility of the metal chelate in the supercritical fluid plays a more important role than the solubility of the chelating agent in the supercritical fluid, as long as sufficient chelating agent is present in the fluid phase. Fluorination of the chelating agent, as in the case of LiFDDC, increases the solubility of the metal chelate, and subsequently enhances the extraction efficiency for the metal ions.