Effects of magnetic field and wall slip conditions on the peristaltic transport of a Newtonian fluid in an asymmetric channel

The effects of both magnetic field and wall slip conditions on the peristaltic transport of a Newtonian fluid in an asymmetric channel are studied analytically and numerically. The channel asymmetry is generated by propagation of waves on the channel walls travelling with different amplitudes, phases but with the same speed. The long wavelength and low Reynolds number assumptions are considered in obtaining solution for the flow. The flow is investigated in a wave frame of reference moving with velocity of the wave. Closed form expressions have been obtained for the stream function and the axial velocity component in fixed frame. The effects of phase difference, Knudsen number and magnetic field on the pumping characteristics and velocity field are discussed. Several known results of interest are found to follow as particular cases of the solution of the problem considered.     

Effects of rotation and magnetic field on the nonlinear peristaltic flow of a second-order fluid in an asymmetric channel through a porous medium

In this paper, the effects of both rotation and magnetic field of the peristaltic transport of a second-order fluid through a porous medium in a channel are studied analytically and computed numerically. The material is represented by the constitutive equations for a second-order fluid. Closed-form solutions under the consideration of long wavelength and low Reynolds number is presented. The analytical expressions for the pressure gradient, pressure rise, friction force, stream function, shear stress, and velocity are obtained in the physical domain. The effects of the non-dimensional wave amplitude, porosity, magnetic field, rotation, and the dimensionless time-mean flow in the wave frame are analyzed theoretically and computed numerically. Numerical results are given and illustrated graphically in each case considered. Comparison was made with the results obtained in the presence and absence of rotation, magnetic field, and porosity. The results indicate that the effects of the non-dimensional wave amplitude, porosity, magnetic field, rotation, and the dimensionless time-mean flow are very pronounced in the phenomena.     

The Mathematical Analysis for Peristaltic Flow of Hyperbolic Tangent Fluid in a Curved Channel

In the present paper, we have investigated the peristaltic flow of hyperbolic tangent fluid in a curved channel. The governing equations of hyperbolic tangent fluid model for curved channel are derived including the effects of curvature. The highly nonlinear partial differential equations are simplified by using the wave frame transformation,long wave length and low Reynolds number assumptions. The reduced nonlinear partial differential equation is solved analytically with the help of homotopy perturbation method (HPM). The physical features of pertinent parameters have been discussed by plotting the graphs of pressure rise and stream functions.     

The effects of porosity and permeability on fluid flow and heat transfer of multi walled carbon nano-tubes suspended in oil (MWCNT/Oil nano-fluid) in a microchannel filled with a porous medium

The forced convection heat transfer and laminar flow in a two-dimensional microchannel filled with a porous medium is numerically investigated. The nano-particles which have been used are multi walled carbon nano-tubes (MWCNT) suspended in oil as the based fluid. The assumption of no-slip condition between the base fluid and nano-particles as well as the thermal equilibrium between them allows us to study the nanofluid in a single phase. The nanofluid flow through the microchannel has been modeled using the Darcy–Forchheimer equation. It is also assumed that there is a thermal equilibrium between the solid phase and the nanofluid for energy transfer. The walls of the microchannel are under the influence of a fluctuating heat flux. Also, the slip velocity boundary condition has been assumed along the walls. The effects of Darcy number, porosity and slip coefficients and Reynolds number on the velocity and temperature profiles and Nusselt number will be studied in this research.     

Comparative study on electroosmosis modulated flow of MHD viscoelastic fluid in the presence of modified Darcy’s law

Magnetic field plays an important role in numerous fields such as biological, chemical, mechanical and medical research. In clinical and medical research the high field magnets are extremely important to create 3D images of anatomical and diagnostic importance from nuclear magnetic resonance signals. In view of these applications, the purpose of present work is to explore the impact of an external magnetic field on the viscoelastic fluid flow in the existence of electroosmosis, porous medium and slip boundary conditions. The governing equation is modified under the suitable dimensionless quantities. The resulting non-dimensional differential equation is evaluated by analytical as well as numerical (finite difference and cubic B-spline) methods. The convergence analysis is also presented for the numerical methods. The variations of sundry parameters on velocity, volume flow rate and skin friction are presented through graphical representations. The current analysis depicts that, the higher velocities are noticed in viscoelastic fluid as compared with Newtonian fluid. The velocity enhances with rising of slip and Darcy parameters. Volume flow rate rises with the slip and viscoelastic parameters. Skin friction is a decreasing function of zeta potential, Darcy number and Hall current parameter. The limiting solutions can be captured for the Newtonian fluid model by setting the viscoelastic parameter to zero.     

Analytical Solution for Peristaltic Transport of Viscous Nanofluid in an Asymmetric Channel with Full Slip and Convective Conditions

The peristaltic flow of nanofluids is a relatively new area of research. Scientists are of the opinion that the no-slip conditions at the boundaries are no longer valid and consequently, the first and the second order slip conditions should be addressed. In this paper, the effects of slip conditions and the convective boundary conditions at the boundary walls on the peristaltic flow of a viscous nanofluid are investigated for. Also, the exact analytical solutions are obtained for the model. The obtained results are presented through graphs and discussed. The results reveal that the two slip parameters have strong effects on the temperature and the nanoparticles volume fraction profiles. Moreover, it has been seen that the temperature and nanoparticles volume fraction profiles attain certain values when the first slip condition exceeds a specified value. However, no limit value for the second slip parameter has been detected. Further, the effects of the various emerging parameters on the flow and heat transfer characteristics have been presented.     

On the influence of wall properties in the MHD peristaltic transport with heat transfer and porous medium

The effect of elasticity of the flexible walls on the MHD peristaltic flow of a Newtonian fluid in a two-dimensional porous channel with heat transfer has been studied under the assumptions of long-wavelength and low-Reynolds number. The analytical solution has been obtained for the stream function, temperature and heat transfer coefficient. The effect of various emerging parameters on the flow characteristics are shown and discussed with the help of graphs. The numerical results show that the trapped bolus increases in size and more trapped bolus appears with increasing permeability parameter, elastic tension and mass characterizing parameters but decreases for large values of Hartmann number.     

Influence of partial slip on the peristaltic flow in a porous medium

In this paper, the slip effects are discussed on the peristaltic flow of a viscous fluid in a porous medium. A long wavelength approximation is used in the flow modelling. The solutions for stream function and axial velocity are constructed by employing the Adomian decomposition method. Numerical integration has been used for the pumping and trapping phenomena. Graphs illustrate the physical behavior. It is noted that the size of the trapped bolus decreases and its symmetry disappears for large values of the slip parameter. Further, the peristaltic pumping rate decreases by increasing the slip parameter.     

The Blood Flow of Prandtl Fluid Through a Tapered Stenosed Arteries in Permeable Walls with Magnetic Field

This Communication deals with the blood flow of Prandtl fluid through a tapered stenosed arteries having permeable walls.The governing equations of two-dimensional Prandtl fluid model are modelled in cylindrical coordinates.The highly nonlinear equations are simplified with the help of non-dimensional variables under the assumption of mild stenosis.The solution of reduced nonlinear equation subject to boundary condition of porous walls having the effects of Darcy's number and slip parameter are computed analytically with the help of perturbation method.Effects of emerging parameters such as impedance A,slip parameter a,stenosis height 6,magnetic parameter and stress component Srz on velocity are illustrated graphically.The streamlines have also been presented to discuss the trapping bolus discipline.     

基于LBM的部分热活跃边界下多孔腔体内自然对流换热

采用Boltzmann方法模拟部分热活跃边界下的多孔腔体内自然对流,探讨不同热边界布置方案、孔隙度、Da数及Ra数对其流动传热的影响.数值计算表明：Da=10^-4时,腔体内中央出现一个循环流模式,只在Ra数很大时孔隙度才对传热有影响; Da=10^-2时,腔体内出现两个循环流,在Ra数很小时孔隙度对传热产生强烈的的影响.热活跃边界位置影响腔体内流体对流传热的强度,加热边界布置在底部、而冷却边界布置在顶部（Bottom-Top布置方式）,对多孔腔体内对流传热最有利,优于全热边界布置方式的传热效果.     

复杂多孔介质腔体内自然对流换热的数值研究

采用曲线坐标系下压力与速度耦合的SIMPLEC算法,数值研究复杂多孔介质腔体内的自然对流换热问题.腔体的曲面温度分别保持恒定,上下表面绝热.在曲线坐标系中用有限容积法离散方程,并采用Brinkman扩展达西模型及局部非热平衡模型求解,综合研究Rayleigh数,Darcy数、孔隙率等参数对腔体内自然对流换热的影响.计算结果表明:Rayleigh数和Darcy数的影响最大而孔隙率的影响很小,同时存在使得腔体内换热达到最强的最佳纵横比.     

Slip effects on the peristaltic transport of MHD fluid with variable viscosity

This Letter concerns with the peristaltic analysis of MHD viscous fluid in a two-dimensional channel with variable viscosity under the effect of slip condition. A long wavelength and low Reynolds number assumption is used in the problem formulation. An exact solution is presented for the case of hydrodynamic fluid while for magnetohydrodynamic fluid a series solution is obtained in the small power of viscosity parameter. The salient features of pumping and trapping phenomena are discussed in detail through the numerical integration. It is noted that an increase in the slip parameter decreases the peristaltic pumping region. Moreover, the size of trapped bolus decreases by increasing the slip parameter.     

Effect of Hall and ion-slip on the peristaltic transport of nanofluid: A biomedical application

The peristaltic flow of viscous nanofluid in a channel with compliant walls is examined. The flow analysis is presented in the presence of Hall and ion-slip effects. The resulting equations through long wavelength and low Reynolds number approaches are solved. Stream function is obtained in closed form. Attention has been given to the influence of Brownian motion, thermophoresis and Hall and ion slip parameters on the velocity, temperature and concentration profiles. The results show an affective increase in the temperature and nanoparticles concentration with the increase in the strength of Brownian motion effects. Similar results are observed for Hall and ion slip parameters. Further heat transfer coefficient is an increasing function of Hall and ion-slip parameters. Also decrease in the size of trapped bolus is shown for Hall and ion-slip parameters.     

Thermal radiation effects on Williamson fluid flow due to an expanding/contracting cylinder with nanomaterials: Dual solutions

The phenomena of heat and mass transfer during the flow of non-Newtonian transfer are amongst the core subjects in mechanical sciences. Recently, the nanomaterials are among the eminent tools for improving the low thermal conductivity of working fluids. Therefore, in view of the existing contributions, this article presents a two-dimensional numerical simulation for the transient flow of a non-Newtonian nanofluid generated by an expanding/contracting circular cylinder. This critical review further explores the impacts of variable magnetic field, thermal radiation, velocity slip and convective boundary conditions. The basic governing equations for Williamson fluid flow are formulated with the assistance of boundary layer approximations. The non-dimensional form of partially coupled ordinary differential equations has been tackled numerically by utilizing versatile Runge–Kutta integration scheme. The momentum, thermal and concentration characteristics are investigated with respect to several critical parameters, like, Weissenberg number, unsteadiness parameter, viscosity ratio parameter, slip parameter, suction parameter, magnetic parameter, thermophoresis parameter, Brownian motion parameter, Prandtl number, Lewis number and Biot number. The outcomes of the systematic reviews of these parameters and forest plots are illustrated. The study reveals that multiple solutions for the considered problem occurs for diverse values of involved physical parameters. The computed results indicate that the friction and heat transfer coefficients are significantly raised by the magnetic parameter for upper branch solutions.     

Numerical Simulation of MHD Peristaltic Flow with Variable Electrical Conductivity and Joule Dissipation Using Generalized Differential Quadrature Method

In this paper, the MHD peristaltic flow inside wavy walls of an asymmetric channel is investigated, where the walls of the channel are moving with peristaltic wave velocity along the channel length. During this investigation,the electrical conductivity both in Lorentz force and Joule heating is taken to be temperature dependent. Also, the long wavelength and low Reynolds number assumptions are utilized to reduce the governing partial differential equations into a set of coupled nonlinear ordinary differential equations. The new set of obtained equations is then numerically solved using the generalized differential quadrature method(GDQM). This is the first attempt to solve the nonlinear equations arising in the peristaltic flows using this method in combination with the Newton-Raphson technique. Moreover, in order to check the accuracy of the proposed numerical method, our results are compared with the results of built-in Mathematica command NDSolve. Taking Joule heating and viscous dissipation into account, the effects of various parameters appearing in the problem are used to discuss the fluid flow characteristics and heat transfer in the electrically conducting fluids graphically. In presence of variable electrical conductivity, velocity and temperature profiles are highly decreasing in nature when the intensity of the electrical conductivity parameter is strengthened.     

Slip effects on streamline topologies and their bifurcations for peristaltic flows of a viscous fluid

We discuss the effects of the surface slip on streamline patterns and their bifurcations for the peristaltic transport of a Newtonian fluid. The flow is in a two-dimensional symmetric channel or an axisymmetric tube. An exact expression for the stream function is obtained in the wave frame under the assumptions of long wavelength and low Reynolds number for both cases. For the discussion of the particle path in the wave frame, a system of nonlinear autonomous differential equations is established and the methods of dynamical systems are used to discuss the local bifurcations and their topological changes. Moreover, all types of bifurcations and their topological changes are discussed graphically. Finally, the global bifurcation diagram is used to summarize the bifurcations.     

Shear Stress in a Couette Flow of Liquid-Particle Suspensions

The mechanisms of momentum transfer and shear stress of liquid-particle suspensions in two-dimensional Couette flow are studied using direct numerical simulation by lattice-Boltzmann techniques. The results obtained display complex flow phenomena that arise from the two-phase nature of the fluid including a nonlinear velocity profile, layering of particles, and apparent slip near the solid walls. The general rheological behaviour of the suspension is dilatant. A detailed study of the various momentum transfer mechanisms that contribute to the total shear stress indicates that the observed shear thickening is related to enhanced relative solid phase stress for increasing shear rates.     

气体动理学格式模拟多孔介质流动的可行性

将气体动理学格式（GKS）拓展到模拟多孔介质内的低速渗流,并检验在孔隙尺度上模拟不可压缩低速流动的可行性与有效性.结果表明：GKS具有二阶空间精度,能够较精确地计算多孔介质的渗透率;相比于单松弛格子玻尔兹曼方法,GKS能够精确实现壁面无滑移边界条件,从而正确反映渗透率与黏性无关的特性;对于Berea砂岩切片结构中的复杂流动,模拟结果与实验吻合较好,能较精确地计算渗透率.给出GKS模拟达西渗流的马赫数选取准则,为研究多孔介质流动提供新的工具.     

不连续冷源布局多孔介质内热流耦合LBM数值模拟

为研究不连续冷源边界对内置发热体多孔介质方腔内传热及流动的影响，采用格子Boltzmann方法对REV尺度下多孔介质方腔内的自然对流进行计算，并研究瑞利数（Ra）、达西数（Da）、孔隙度对多孔介质方腔内传热流动的影响.发现Da对方腔内的流体流型影响很大，Da为10^-4时，多孔介质方腔内只有一个涡流，而Da为10^-2时，方腔内有两个涡流.增大Ra、Da、孔隙度可以提高冷源壁面的平均努赛尔数（Nu），增强散热效果，孔隙率对平均Nu影响程度和Da的大小有关.当冷源布置在壁面上方，壁面的平均Nu随Ra的增加剧烈变化，方腔处于高Ra条件下时，将冷源布置在边界的上方可以提高散热效果.6种布置方案中Case 6的散热效果最好.     

Boundary Layer Flow over a Curved Surface Imbedded in Porous Medium

This research is made to visualize the boundary layer flow by a curved stretching sheet embedded in porous medium. The geometry is bended(curved), therefore the curvilinear coordinates are used to model the present problem.Fluid is electrically conducting with the presence of uniform magnetic field. The governing non-linear partial differential equation reduces to non-linear ordinary differential equations by using the dimensionless suitable transformations. The numerical solutions are obtained by using the method bvp4c from MATLAB. The effects of curvature parameter, nondimensional magnetic parameter, and porosity parameter on the velocity field and skin friction coefficient are examined.The skin friction profile enhances with enhancing the values of porosity and magnetic parameter. Comparison of the present results with the existing results in the literature for the flat surface is also given.