一种含放大机构的负刚度动力吸振器的参数优化

在大多数情况下机械振动是有害的,它不仅产生噪声还会降低设备的工作精度和使用寿命.采用正刚度特性的吸振、隔振系统往往难以达到满意效果,这种情况在低频振动控制系统中尤其明显.放大机构与负刚度元件在振动控制领域均表现出良好性能,但是较少有对同时含有放大机构与负刚度装置的动力吸振系统的研究.以Voigt型动力吸振器为基础提出了一种将放大机构应用于含负刚度弹簧元件的动力吸振器模型,对该模型的最优参数进行了研究.首先建立了系统的运动微分方程并得到了其解析解,发现该系统存在两个固定点,利用固定点理论得到了动力吸振器的最优频率比.根据负刚度的特性,在保证系统稳定的前提下得到了最优负刚度比,并推导了系统的近似最优阻尼比.通过数值仿真验证了解析解的正确性.与多种动力吸振器在简谐激励与随机激励下进行了对比,说明了本文模型相比于已有的动力吸振器,能够大幅降低共振振幅、拓宽减振频带并且降低系统的谐振频率,为设计新型动力吸振器模型提供了理论依据.      

不同类型水平弹簧组合刚度非线性吸振器的性能分析及稳定性研究

动力吸振器作为一种振动控制单元被广泛运用于各种工程场合,但传统的线性吸振器只能实现窄带振动控制.文章在线性吸振器的基础上引入对称水平弹簧构建线性刚度与非线性刚度相结合的组合刚度非线性吸振器,以提升吸振器的吸振性能.考虑实际工程中可能的安装方式,分别建立水平弹簧接地安装和不接地安装的组合刚度非线性吸振器模型,利用谐波平衡法结合弧长延拓法解析求解动力学响应,并与数值结果相互验证,证明了求解结果的准确性.随后分析比较两种组合刚度非线性吸振器与线性吸振器以及非线性能量阱之间的吸振性能,发现水平弹簧接地安装类型的组合刚度非线性吸振器在保留线性吸振器优势的同时又改善其吸振频带窄的缺点,且与非线性能量阱相比在主共振频率附近的较宽频内吸振性能更优.在此基础上,讨论了水平弹簧参数以及吸振器阻尼对主结构振动幅频响应和稳定性的影响,最后观察分析主结构幅频响应曲线不稳定区内的复杂动力学行为.研究结果表明合适的设计参数能够使得主结构振动峰值较低的同时,频响曲线不稳定运动区域的范围也较小.     

Design of a tuned vibration absorber for a slender hollow cylindrical structure

Abstract

In this paper, details of the design work for a tuned vibration absorber to be used on a hollow cylindrical structure is presented. The vibration problem is of resonant type and the tuned vibration absorber is designed to suppress the displacement vibration response of the free end of the slender hollow structure dominated by the contribution of its lowest transverse vibration modes. The structure is modeled using a commercial finite element software. Finite element model of the structure is verified using experimentally obtained frequency response functions and modal parameters. Effective parameters of the tuned vibration absorber design are then determined based on finite element analysis simulations of the vibration suppression performance of the tuned vibration absorber as it is used on the structure. Details of the tuned vibration absorber design are determined and a prototype is fabricated. Prototype tuned vibration absorber is then characterized experimentally both as a standalone system and also as it is used on the main structure. Vibration reduction performance of the physical prototype of the tuned vibration absorber is also compared with its vibration reduction performance estimated from finite element analysis simulations so that the analysis based design process can be validated.

Communicated by Dumitru Caruntu.     

ROBUST CONTROL OF VORTEX-INDUCED VIBRATION OF A RIGID CYLINDER SUPPORTED BY AN ELASTIC BEAM USING μ -SYNTHESIS

For lightweight and flexible structures, it is important to suppress the vibrations induced by interactions between fluid and structures. This paper presents the robust control of the vortex-induced vibration of a rigid circular cylinder supported by an elastic cantilever beam in which the fluid force is considered as an external excitation on the structure. For the problems considered here, the excitation frequency is assumed to be equal to the natural frequency of the structure or the “lock-in” frequency. The natural frequencies of this analytical model are calculated by using the modal analysis method and then modal coordinates are introduced to obtain the state equations of the structural system. A pair of piezoelectric devices fixed under the base plate, on which the elastic beam is clamped, were used as actuators. A robust controller satisfying the nominal performance and robust performance is designed using μ -synthesis theory based on the structured singular value. Simulation and experiment were carried out with the designed controller and the effectiveness of the robust control strategy was verified by both experimental and simulation results.     

The analysis of the orientation effect of non-linear flexible systems on performance of the pendulum absorber

In practical applications, many vibration absorbers are used to absorb oscillation of a structure, one of which is pendulum-type vibration absorbers. They are widely used in engineering applications where oscillations of a structure are constrained within a prescribed envelope. In this study, the primary structure consists of a flexible beam which has a single degree of freedom, and is subjected to a vertical sinusoidal base excitation. Non-linearity in the primary structure is due to large deflections. The rotation point of the pendulum-type absorber is attached to the tip of the primary structure. The primary structure and absorber together constitute a couple systems with two degrees of freedom. The primary objective of this study is to determine the effectiveness of pendulum-type passive vibration absorber attached to a primary structure whose orientation varies. In this study, the orientation at which the absorber is effective is established, and the factors that affect performance of the absorber are determined. The results are in good agreement with the experimental ones given in the literature.     

自适应主动共振吸振器的设计和减振性能研究

为了扩大吸振器的工作频带,减小吸振器的阻尼,最终提高吸振器的减振效果,本文设计了一种自适应主动共振吸振器。文中对几种不同种类吸振器的减振原理、动力学特性等进行了理论分析和比较,集成自调谐吸振器和主动吸振器的优点,完成了一种自适应主动共振吸振器的设计,并提出了一种变步长、双寻优的控制算法。在振动台上测试了吸振器的动力学特性并理论分析了吸振器的移频特性和阻尼特性。在两端固支梁上对吸振器的减振效果进行了实验评估。实验结果显示,相比自调谐吸振器,加入主动力控制后,自适应主动共振吸振器的阻尼比从0.04减小至0.02,减振效果得到了显著的提高。     

Proportional and derivative control for steady-state vibration mitigation in a piecewise linear beam system

A control using Proportional and/or Derivative feedback (PD-control) is applied on a piecewise linear beam system with a flushing one-sided spring element for steady-state vibration amplitude mitigation. Two control objectives are formulated: (1) minimize the transversal vibration amplitude of the midpoint of the beam at the frequency where the first harmonic resonance occurs, (2) achieve this in a larger (low) excitation frequency range, where the lowest nonlinear normal mode dominates the response. Experimentally realizable combinations of PD-control are evaluated for both control objectives. Eventually objective (1) is realized by applying proportional control only, whereas derivative control is selected to realize objective (2). The vibration reduction that is achieved in simulations and validated by experiments is very significant for both objectives. Current results obtained with active PD-control are compared with earlier results obtained using a passive dynamic vibration absorber.     

Suppression of super-harmonic resonance response using a linear vibration absorber

Super-harmonic resonances may appear in the forced response of a weakly nonlinear oscillator having cubic nonlinearity, when the forcing frequency is approximately equal to one-third of the linearized natural frequency. Under super-harmonic resonance conditions, the frequency-response curve of the amplitude of the free-oscillation terms may exhibit saddle-node bifurcations, jump and hysteresis phenomena. A linear vibration absorber is used to suppress the super-harmonic resonance response of a cubically nonlinear oscillator with external excitation. The absorber can be considered as a small mass-spring-damper oscillator and thus does not adversely affect the dynamic performance of the nonlinear primary oscillator. It is shown that such a vibration absorber is effective in suppressing the super-harmonic resonance response and eliminating saddle-node bifurcations and jump phenomena of the nonlinear oscillator. Numerical examples are given to illustrate the effectiveness of the absorber in attenuating the super-harmonic resonance response.     

一种含惯容和接地刚度的动力吸振器参数优化

大多数机械振动属于有害振动, 不仅会产生噪声还会降低设备的使用寿命和工作性能. 接地刚度和惯容这两种器件均能改变系统的固有频率, 在振动控制领域中有着良好的效果. 但目前的大部分研究仅着眼于单一元件对系统产生的影响, 而此类吸振器逐渐难以满足设备对振动控制需求的增长. 在Voigt型动力吸振器模型的基础上, 提出了一种含有惯容和接地刚度的新型动力吸振器模型, 详细研究了该模型的最优设计参数, 推导出最优设计公式的解析解. 首先通过牛顿第二定律建立起二自由度系统的运动微分方程, 计算出系统解析解, 发现系统存在3个与阻尼比无关的固定点, 利用固定点理论得到了动力吸振器的最优频率比. 为保证系统稳定性, 筛选最优接地刚度比时, 发现不恰当的惯容系数会导致系统产生失稳现象, 进而推导出惯容最佳工作范围, 最终得到了最优接地刚度比和近似最优阻尼比. 分析了惯容系数取值在最佳范围以外时系统的工作情况, 并给出了实际应用中的建议. 通过数值仿真验证了推导得到解析解的正确性. 与多种已有的动力吸振器在简谐激励和随机激励的工况下进行对比, 说明了该模型能够大幅降低主系统振幅, 拓宽减振频带, 为设计新型吸振器提供了理论依据.      

分布振子复合板的模态阻尼及多点激励下阻尼减振相关性

分布阻尼振子可拓宽结构减振频带,因此可将振子分布于板中以形成复合板（简称“分布振子复合板”）,进而实现较宽的减振频带．对于多点支撑处受到宽频非一致激励（例如在不同激励点处的激励频率、幅值与相位有差异）的分布振子复合板,目前还缺乏有效简便的优化控制指标．在作者之前的研究中,针对含分布振子的梁推导了基于模态应变能的模态阻尼计算理论,讨论了模态阻尼与单点激励下梁的减振效果的相关性,并应用于宽频减振设计优化．本文进一步将模态阻尼计算理论推广到分布振子复合板,并将研究从梁的单点激励扩展到板的多点非一致激励下的阻尼减振相关性．首先,在利用模态应变能法推导得到分布振子复合板的模态阻尼计算公式后,从理论上讨论了不同边界条件与模态阶次对计算结果的影响,以及计算理论的适用性．而后,进一步通过有限元参数分析了边界条件、频率比、模态阶次与质量比的影响．最后,通过算例分析了无振子板或分布振子复合板在四个激励点具有多种幅值与相位组合情况下的稳态响应．结果表明,推导的模态阻尼计算公式可正确预测不同边界条件下的模态阻尼,且理论预测的模态阻尼与基板的稳态平均加速度减小率、稳态峰值应变能减小率均有较高的相关性．     

一种含负刚度元件的新型动力吸振器的参数优化

提出了一种含有负刚度弹簧元件的新型动力吸振器模型,对该模型的最优参数进行了详细研究. 通过拉氏变换得到了系统的解析解,发现该系统存在着两个固定点,利用固定点理论得到了动力吸振器的最优阻尼比和最优频率比. 进一步研究发现接地刚度取负值时能够得到更好的减振效果,根据负刚度的特性得到了在保证系统稳定情况下的最优负刚度比. 通过数值解与解析解的对比证明了解析解的正确性. 通过与两种已有的典型动力吸振器模型在简谐激励和随机激励情况下的对比,说明了负刚度模型在主系统减振方面具有很大的优势,减振效果远优于两种已有动力吸振器模型,从而为设计新型动力吸振器模型提出了理论上的依据.      

Optimum design of dynamic vibration absorbers for a beam, based on H ∞ and H 2 Optimization

The solutions to H _∞ and H ₂ optimization problems of a variant dynamic vibration absorber (DVA) applied to suppress vibration in beam structures are derived analytically. The H _∞ optimum parameters such as tuning frequency and damping ratios are expressed based on fixed-point theory to minimize the resonant vibration amplitude, as well as, the H ₂ optimum parameters to minimize the total vibration energy or the mean square motion of a beam under random force excitation as analytical formulas. The reduction in maximum amplitude responses and mean square motion of a beam using the traditional vibration absorber is compared with the proposed dynamic absorber. Numerical results show the non-traditional DVA under optimum conditions has better vibration suppression performance on beam structures than the traditional design of DVA. Furthermore, comparing H _∞ and H ₂ optimization procedures shows that for a beam under random force excitation, use of H₂ optimum parameters resulting in smaller mean square motion than the other optimization.     

A Theoretical and Experimental Implementation of a Control Method Based on Saturation

A novel approach for implementing an active nonlinear vibration absorber is presented. The absorber, which is built in electronic circuitry, takes advantage of the saturation phenomenon that occurs when two natural frequencies of a system with quadratic nonlinearities are in the ratio of two-to-one. When the system is excited at a frequency near the higher natural frequency, there is a small ceiling for the system response at the higher frequency and the rest of the input energy is channeled to the low-frequency mode.A working model of using saturation to suppress the vibrations of a rigid beam connected to a DC motor has been built. An electronic oscillator is built, and its frequency is set at one-half the frequency of the beam. The output from a sensor on the beam is multiplied by the output from the electronic oscillator and a suitable gain, and the result is used as the forcing term for the oscillator. At the same time, the output from the oscillator is squared and multiplied by a suitable gain, and that result is used as the input to the motor. The oscillator/actuator and the beam act as the two modes of a two-degree-of-freedom quadratically coupled system with a 2:1 autoparametric resonance. When the beam is excited by a harmonic force, its motion quickly becomes saturated, and most of the energy imparted to the beam by the harmonic force is transferred to the electronic circuit and from there to the actuator. Thus, the harmonic force is made to work against itself. As a result, the motion of the beam always remains small.     

含机械调频式动力吸振器的准零刚度隔振系统隔振性能分析

基于动力吸振器原理,在单自由度准零刚度隔振器基础上耦合可调频动力吸振器构成两自由度隔振系统。首先,对动力吸振器工作原理进行理论分析并提出其力学模型;其次,通过静力学分析,推导出系统满足零刚度条件时,各参数间的关系并分析其对系统刚度特性的影响;然后,建立两自由度隔振系统非线性动力学方程,利用谐波平衡法进行幅频响应解析分析,得到力传递率表达式;最后,数值分析动力吸振器阻尼、刚度、质量、激励力幅值和弹簧片有效长度对力传递率的影响规律,并与单自由度准零刚度隔振系统及两自由度线性隔振系统对比分析。结果表明：通过选择适当的动力吸振器参数不仅可以减小系统的起始隔振频率,增宽隔振频带,且还能加快系统力传递率在特定频段内的衰减速率,改善系统的低频隔振性能,实现激励频率的可适应性。     

Application of a Dynamic Vibration Absorber to a Piecewise Linear Beam System

This paper deals with the application of a linear dynamic vibration absorber (DVA) to a piecewise linear beam system to suppress its first harmonic resonance. Both the undamped and the damped DVAs are considered. Results of experiments and simulations are presented and show good resemblance. It appears that the undamped DVA is able to suppress the harmonic resonance, while simultaneously many subharmonics appear. The damped DVA suppresses the first harmonic resonance as well as its super- and subharmonics.     

A MODAL TESTING METHOD FOR CANTILEVER BEAM1)

基于欧拉-伯努利梁理论得到悬臂梁自由振动的振型函数。通过数值计算得出实验用的悬臂梁前五阶振型的节点位置及其与梁长的比值。考虑传感器对悬臂梁固有频率的影响,建立梁-传感器模型进行仿真分析并得出悬臂梁前五阶固有频率。基于节点位置和测点位置,在实验中选择激励点。将具体实验的结果与梁-传感器仿真模型结果进行对比,通过前五阶固有频率的误差分析,发现仿真分析结果与实验结果误差最高为 1.3%。研究完整地叙述了悬臂梁的模态测试流程,可为工程技术人员的模态测试起一定的指导作用。     

两尺度Duffing系统的动力吸振器减振研究

两尺度耦合的Duffing系统存在复杂振动, 此类振动具有振幅大、频率高的特点, 对系统的危害不容忽视. 研究了线性动力吸振器对低频参数激励下Duffing系统的振动控制问题, 通过对比耦合动力吸振器前后系统的时间历程图、相图, 发现加入动力吸振器后系统会由单一振动模式转变为混合振动模式(簇发振动), 振动幅值明显减小, 尤其对高频振动部分抑制明显. 利用快慢分析法, 当参数激励为慢变过程时得到相应的自治系统, 并发现自治系统稳定性与分岔行为对非自治系统振动响应具有明显调节作用. 研究结果表明, 虽然耦合动力吸振器前后自治系统均发生叉形分岔, 但是加入吸振器后自治系统稳定性发生变化, 稳定中心变为渐进稳定的焦点, 稳定平衡线对非自治系统轨线的吸引力增强, 使得响应振动幅值减小; 另外轨线在不同吸引子之间的跳跃次数减少, 也是导致响应振动幅值减小的另一个原因. 通过对参数激励的相关参数减振效果分析, 发现加入的动力吸振器在较大的振动幅值和频率范围内都能起到抑制系统振动的作用. 为两尺度系统耦合线性动力吸振器减振研究提供了理论依据.      

Exploiting internal resonance for vibration suppression and energy harvesting from structures using an inner mounted oscillator

The flexural vibration of a symmetrically laminated composite cantilever beam carrying a sliding mass under harmonic base excitations is investigated. An internally mounted oscillator constrained to move along the beam is employed in order to fulfill a multi-task that consists of both attenuating the beam vibrations in a resonance status and harvesting this residual energy as a complementary subtask. The set of nonlinear partial differential equations of motion derived by Hamilton’s principle are reduced and semi-analytically solved by the successive application of Galerkin’s and the multiple-scales perturbation methods. It is shown that by properly tuning the natural frequencies of the system, internal resonance condition can be achieved. Stability of fixed points and bifurcation of steady-state solutions are studied for internal and external resonances status. It results that transfer of energy or modal saturation phenomenon occurs between vibrational modes of the beam and the sliding mass motion through fulfilling an internal resonance condition. This study also reveals that absorbers can be successfully implemented inside structures without affecting their functionality and encumbering additional space but can also be designed to convert transverse vibrations into internal longitudinal oscillations exploitable in a straightforward manner to produce electrical energy.     

反共振理论在动力吸振器设计中的应用

本文旨在讨论反共振理论在动力吸振器设计中的应用，特别是应用动力吸振器族控制或消除复杂结构，机械系统中某些子结构稳态响应或系统共振的方法，最后给出了反共振动力吸振器族在某大型机械设备振动控制中的应用实例。     

A vibration absorber for motorcycle handles

This paper describes the application of a vibration absorber to ameliorate the comfort of motorcycle handles. The concept of dynamical absorber is briefly summarised and a frequency response function is expressed as the ratio of vibration amplitudes (transmissibility). Some practical hints on the tuning strategy are also suggested in order to correctly define the absorber and then achieve the most effective vibration reduction. A specifically designed item is presented, with the peculiar characteristic of taking advantage of the damping properties of viscoelastic material undergoing shear deformations. An experimental verification of the good performances of the absorber is eventually given on the basis of both a modal analysis of a motorbike and the testing of its handle on an electrodynamical shaker.