Effect of graft polymer on the formation of micron-sized,monodisperse, "onion-like" alternately multilayered poly(methyl methacrylate)/polystyrene composite particles by reconstruction of morphology with the solvent-absorbing/releasing method

Some factors contributing to the formation of an alternately multilayered structure of micron-sized, monodisperse poly(methyl methacrylate) (PMMA)/polystyrene (PS) (1/1, w/w) composite particles by reconstruction of the morphology with the solvent-absorbing/releasing method (SARM) were discussed. The original composite particles, which were produced by seeded dispersion polymerization (SDP) of styrene, had a core–shell structure. When PS/PMMA (1/1, w/w) composite particles produced by SDP of methyl methacrylate were treated by the SARM with toluene, the reconstructed morphology of the composite particles was not the multilayered structure but a hemisphere (or core–shell). The PS/PMMA composite particle contained less than 10 wt% PMMA- g-PS. On the other hand, the PMMA/PS composite particles contained about 40 wt% graft polymer. The graft polymer would exist at the interfaces of the alternate multilayers and decrease their interfacial energy. This was the main reason why the alternately multilayered structure was constructed by the SARM, though the total interfacial area between PMMA and PS layers in the multilayered particle is much larger than that of the hemisphere (or core–shell).     

Facile Method to Synthesis of Golf Ball-Like Particles via Early-Ceased Seeded Dispersion Polymerization

Golf ball-like poly(methyl methacrylate) particles were produced via seeded dispersion polymerization of 2-ethylhexyl methacrylate with poly(methyl methacrylate) seed beads in the presence of saturated hydrocarbon droplets and evaporation of the hydrocarbon after the polymerization. It was observed that the particles are acquired in the form of a stable dispersion if the reaction is ceased around 42% of monomer conversion. Moreover, the effect of different reaction conditions (e.g. hydrocarbon and stabilizer type, initiator and monomer content, and polarity of the medium) on the shape and stability of the produced particles was investigated. It was revealed that the number and size of the dents on the surface of the golf ball-like particles could be manipulated easily with a simple change in each one of the parameters referred to above. In addition, the experimental results showed that some of the particles become unstable and diffuse into each other during polymerization, resulting in the formation of huge golf ball-like objects. The production of disk-like poly(methyl methacrylate) particles via fully developed seeded dispersion polymerization in the presence of a hydrocarbon which owns lengthy alkyl chain was another interesting finding of this study.     

Influence of viscosity within polymerizing particle on the morphology of micron-sized,monodisperse composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

Micron-sized, monodisperse polystyrene (PS)/poly( n-butyl methacrylate) (PBMA) composite particles, in which PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles (PS/BMA=1/150, w/w) using various concentrations of benzoyl peroxide as initiator in the absence/presence of sodium nitrite (NaNO ₂) as a water-soluble inhibitor. The percentages of the composite particles having double, triple and over PS domains, which were thermodynamically unstable morphologies, increased with a rapid increase of viscosity within the polymerizing particle.     

Preparation of highly monodisperse poly(methyl methacrylate) particles incorporating fluorescent rhodamine 6G for colloidal crystals

Soap-free emulsion polymerization was extended to preparation of monodisperse poly(methyl methacrylate) (PMMA) particles incorporating rhodamine 6G (R6G) fluorescent molecules. The polymerization was conducted in the presence of an anionic monomer, p-styrenesulfonate (NaSS), which improved dispersion stability of the polymer particles. NaSS concentrations was ranged up to 2 mol/m3 H2O in the polymerization at 0.5 kmol/m3 H2O methyl methacrylate (MMA) monomer and 5 mol/m3 H2O potassium persulfate (KPS) initiator for R6G concentrations from 0.1 to 10 mol/m3-polymer. At R6G concentrations lower than 1.0 mol/m3-polymer, PMMA particles were highly monodisperse and incorporated most R6G molecules. The average sizes of PMMA particles were in a rage of 160-300 nm, and decreased with the concentration of NaSS. The high monodispersity of the particles enabled the fabrication of colloidal crystals of the particles with a vertical deposition method.     

Preparation of micron-size monodisperse poly(2-hydroxyethyl methacrylate) particles by dispersion polymerization

Dispersion polymerization of 2-hydroxyethyl methacrylate using four categories of polymeric stabilizers in a mixture of good and poor solvents was performed to produce polymeric particles. The stabilizers employed were methyl methacrylate and styrene homopolymers, methacryloyl-terminated poly(methyl methacrylate) and polystyrene macromonomers, an amphiphilic poly(methyl methacrylate-co-methacrylic acid-graft-styrene), and polybutadiene derivatives containing reactive vinyl groups. Dispersion copolymerization with a small amount of the macromonomer gave micron-size particles with relatively narrow size distribution. The amphiphilic graft copolymer and the polybutadiene derivatives also afforded monodisperse particles. The mixed ratio between good and poor solvents greatly affected the particle size and size distribution. © 1996 John Wiley & Sons, Inc.     

Seed Dispersion Polymerization to Micron-Size Monodisperse Polymer Particles

Abstract

Seed dispersion polymerization of methyl methacrylate (MMA) in the presence of monodisperse PMMA particles was carried out in an aqueous methanol using poly(methacrylic acid) stabilizer. The polymerization using 2. 5 μ. m-sized seed particles gave monodisperse PMMA particles in the diameter up to 4. 9 μm. The solvent composition and monomer concentration greatly affected the polymerization behavior. Under appropriate conditions, monodisperse PMMA particles in the diameter up to 8. 9 μ, m was prepared from 4. 6 μm-sized seed particles. The seed dispersion polymerization of styrene in the presence of the seed particles produced monodisperse PMMA-polystyrene particles in the micron range. The particles were supposed to have a structure consisting of PMMA-core and polystyrene-shell from ESCA analysis.     

Preparation of novel and unique nonspherical particles with almond-shell-like shape via dual-seeded dispersion polymerization in the presence of saturated hydrocarbon droplets

In this study, the preparation of micron-sized polymer particles having a novel and unique nonspherical shape which we called almond-shell-like by dual-seeded dispersion polymerization (DSDP) of 2-ethylhexyl methacrylate (EHMA) with polystyrene (PS) and poly(methyl methacrylate) (PMMA) seed particles in the presence of decane droplets and evaporation of decane after the polymerization was discussed. The experimental results showed that mushroom-like morphology which is a precursor of the almond-shell-like shape was obtained from DSDP of EHMA. It was found that with changing the PS/PMMA seed particles' weight ratio, the size of the dents on the surface of the particles can be controlled. Furthermore, it was observed that various nonspherical particles can be produced using different methacrylic seed particles and initiators.     

Single emulsion microfluidic production of Janus and core-shell particles via off-chip polymerization

In this work, we describe a straightforward approach to produce monodisperse Janus and core-shell particles by using organic solvent free single emulsion droplet-based microfluidic device combining with off-chip polymerization. To accomplish this, methyl methacrylate (MMA) was used as both the oil phase and solvent to dissolve a polymerizable PEGbased macromolecular surfactant, instead of traditional surfactant, and the photo-initiator. Janus particles can be easily obtained by off-chip UV polymerization due to polymerization induced phase separation between PEG and the formed poly(methyl methacrylate). At the same time, core-shell particles can also be easily attained by inverting the original collecting tube several times and then exposing to UV light. These results may extend the scope of microfluidic technology and the studies on polymerization induced self-assembly/phase-separation into easy fabrication of various new functional materials.     

Preparation of micrometer-sized, monodisperse "janus" composite polymer particles having temperature-sensitive polymer brushes at half of the surface by seeded atom transfer radical polymerization

Micrometer-sized, monodisperse polystyrene (PS)/poly[methyl methacrylate-(chloromethyl)styrene] [P(MMA-CMS)] composite particles having hemispherical structure were prepared by solvent evaporation from toluene droplets containing dissolved PS and P(MMA-CMS) dispersed in aqueous solution, which had been prepared using the membrane method. The formation of hemispherical ("Janus") morphology by phase separation between the PS and the P(MMA-CMS) was confirmed by both optical and electron microscopy. Atom transfer radical polymerization (ATRP) of 2-(dimethylamino)ethyl methacrylate (DM) was subsequently carried out in the presence of hemispherical PS/P(MMA-CMS) composite particles in an aqueous dispersed system. After polymerization, the morphology of the particles changed from spherical to "mushroom" shape as observed by scanning electron microscopy, indicating that DM polymerized inside or on the surface of half [P(MMA-CMS) phase] of the particles. 1H NMR spectra were consistent with chloromethyl functional groups in P(MMA-CMS) operating as ATRP initiators in the DM polymerization.     

悬浮-乳液复合聚合聚苯乙烯-聚甲基丙烯酸甲酯复合粒子的颗粒特性和成粒机理

采用在苯乙烯 (St)悬浮聚合过程中滴加甲基丙烯酸甲酯 (MMA)乳液聚合组分的悬浮 乳液复合聚合方法 ,制备大粒径聚苯乙烯 聚甲基丙烯酸甲酯 (PS PMMA)复合粒子 .研究聚合物粒径分布和颗粒形态的变化发现 ,在St悬浮反应中期滴加MMA乳液聚合组分后 ,聚合体系逐渐由悬浮粒子与乳胶粒子并存向形成单峰分布复合粒子转变 ,最终形成核 壳结构完整的大粒径PS PMMA复合粒子 ;在St悬浮反应初期滴加MMA乳液聚合组分 ,St与MMA一起分散成更小液滴 ,反应后期凝并成非核 壳结构复合粒子 ;在St悬浮反应后期滴加MMA乳液聚合组分 ,PMMA乳胶粒子与PS悬浮粒子基本独立存在 .根据以上结果 ,提出了St MMA悬浮 乳液复合聚合的成粒机理 .     

Fabrication of cage-like particles via unstable seeded dispersion polymerization: A new concept in the polymerization-induced self-assembly

The formation mechanism of hollow micron-sized polystyrene (PS) particles having numerous dents on the surface, so-called cage-like particles, obtained from seeded dispersion polymerization (SDP) of 2-ethylhexyl methacrylate (EHMA) with low molecular weight (MW) PS particles stabilized by poly(vinyl alcohol) (PVA) in the presence of hexadecane droplets was investigated. It was found that association of poly(2-ethylhexyl methacrylate) (PEHMA)/hexadecane phases which occurs due to the instability of the obtained composite particles followed by a diffusion of PS ellipsoidal particles into each other is the main process responsible for the production of such unique morphology. Time course monitoring of the SDP showed that diffusion of hexadecane and/or PS and/or PEHMA phase into PS/PEHMA/hexadecane composite particles through PS shell which happens based on Ostwald ripening is the main phenomenon which results in the formation of the dents on the surface of final particles. Moreover, the experimental results revealed that in this reaction system, the polymerization develops in a faster manner rather than the SDP employing seed particles having higher MWs. Furthermore, it was observed that particles with different surface morphologies can be produced by using different hydrocarbons. The elimination of small particles which are produced in addition to the cage-like ones via decreasing the concentration of the stabilizer was another interesting finding of this research. The acquired results showed that unstable SDP is expected to be a new concept in polymerization-induced self-assembly (PISA) which employs instability of a dispersion for self-assembly of polymeric particles, and therefore, production of polymeric unique objects.     

Production of submicron-sized poly(methyl methacrylate) particles by dispersion polymerization with a poly(dimethylsiloxane)-based azoinitiator in supercritical carbon dioxide

 Submicron-sized, comparatively monodisperse poly (methyl methacrylate) particles were produced by dispersion polymerization of methyl methacrylate with a poly(dimethylsiloxane)-based azoinitiator in supercritical carbon dioxide at 30 MPa for 24 h at 65 °C. The initiator operated not only as a radical initiator but also as a colloidal stabilizer, and was named an “inistab”. Received: 13 February 2001 Accepted: 20 June 2001     

Two-dimensional ordered arrays of monodisperse silica particles grafted with concentrated polymer brushes

Hybrid particles which have a core of monodisperse silica particle and a shell of well-defined poly(methyl methacrylate) chains end-grafted on the core surface with a surface density as high as 0.8 chains/nm² were prepared by surface-initiated atom transfer radical polymerization of methyl methacrylate with an initiator-fixed silica particle. Monolayers of the hybrid particles were formed at the air-water interface by depositing a defined amount of the particle suspension onto water surface. Transmission electron microscopic and atomic force microscopic observations of these monolayers showed that the hybrid particles formed a two-dimensional hexagonally ordered lattice with a wide controllability of interparticle distance. This lattice structure was utilized as a template for the fabrication of a negatively patterned surface of poly(dimethylsiloxane) elastomer.     

Preparation and clinical application of immunomagnetic latex

Magnetic poly(methyl methacrylate) (PMMA)/poly(methyl methacrylate‐co‐methacrylic acid) [P(MMA–MAA)] composite polymer latices were synthesized by two‐stage soapless emulsion polymerization in the presence of magnetite (Fe₃O₄) ferrofluids. Different types and concentrations of fatty acids were reacted with the Fe₃O₄ particles, which were prepared by the coprecipitation of Fe(II) and Fe(III) salts to obtain stable Fe₃O₄ ferrofluids. The Fe₃O₄/polymer particles were monodisperse, and the composite polymer particle size was approximately 100 nm. The morphology of the magnetic composite polymer latex particles was a core–shell structure. The core was PMMA encapsulating Fe₃O₄ particles, and the shell was the P(MMA–MAA) copolymer. The carboxylic acid functional groups (COOH) of methacrylic acid (MAA) were mostly distributed on the surface of the composite polymer latex particles. Antibodies (anti‐human immunoglobulin G) were then chemically bound with COOH groups onto the surface of the magnetic core–shell composite latices through the medium of carbodiimide to form the antibody‐coated magnetic latices (magnetic immunolatices). The MAA shell composition of the composite latex could be adjusted to control the number of COOH groups and thus the number of antibody molecules on the magnetic composite latex particles. With a magnetic sorting device, the magnetic immunolatices derived from the magnetic PMMA/P(MMA–MAA) core–shell composite polymer latex performed well in cell‐separation experiments based on the antigen–antibody reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1342–1356, 2005     

A novel method for encapsulation of a liquid crystal in monodisperse micron-sized polymer particles

Liquid crystals (LCs) encapsulated in monodisperse micron-sized polymer particles were prepared to control the size and size distribution of LC droplets in polymer-dispersed LCs. The poly(methyl methacrylate) (PMMA) seed particles were swollen with the mixture of liquid crystal, monomers (methyl methacrylate and styrene) and initiator by using a diffusion-controlled swelling method. A single LC domain was produced by the phase separation between PMMA and LC through polymerization. The optical microscopy and scanning electron microscopy showed that the particles are highly monodisperse with core–shell structure. Moreover, monodisperse LC core domains were confirmed from polarized optical microscope observations. The final particle morphology was influenced by the cross-linking of the seed particle. When linear PMMA particles, which are not cross-linked, were used as a seed, the microcapsules were distorted after annealing for a few days; however, in the case of cross-linked PMMA particles, the core–shell structure was sustained stably after annealing. Received: 22 November 2000 Accepted: 12 March 2001     

Synthesis of monodisperse, highly cross-linked, fluorescent PMMA particles by dispersion polymerization

We describe a facile method to synthesize sterically stabilized monodisperse fluorescent poly(methyl methacrylate) (PMMA) colloids in the polar solvent mixture water/methanol with either a core-shell or a homogeneously cross-linked structure by dispersion polymerization. The particles were sterically stabilized by the polymer poly(vinylpyrrolidone) (PVP). The morphology of the particles was controlled by varying the moment at which the gradual addition of cross-linker and dye was started. The absence of these extra agents at a time when the particle nuclei formed reduced the negative effects on this important process to a minimum and produced a core-shell structure, whereas an essentially homogeneously cross-linked fluorescent polymer colloid structure could be obtained by reducing the starting time of the addition of dye and cross-linker to zero. Three different dyes were chemically incorporated into the polymer network. Such dyes are important for the use of the particles in confocal scanning laser microscopy studies aimed at characterizing concentrated dispersions quantitatively in real space. A series of PMMA particles with different sizes were obtained through the variation of the weight ratio of solvents and the content of cross-linker. Furthermore, the swelling properties of the cross-linked PMMA particles in a good solvent (tetrahydrofuran) were investigated. The particles were stable in polar solvents (water and formamide) but could also successfully be transferred to apolar solvents such as decahydronaphthalene (decalin). The PVP stabilizer also allowed the particles to be permanently bonded in flexible strings by the application of an external electric field.     

Production of micron-sized monodispersed core/shell composite polymer particles by seeded dispersion polymerization

 The effect of the weight ratio of seed polymer/monomer on the morphology of the poly(methyl methacrylate) (PMMA)/polystyrene (PS) monodispersed composite particles produced by batch seeded dispersion polymerization of styrene with 1.64-μm-sized monodispersed PMMA seed particles in a methanol/water medium (4/1 w/w) was examined. In the PMMA/PS weight ratios of 3/1 and 2/1, the composite particles had a clear morphology consisting of a PMMA core and a PS shell. In the ratio of 1/1, a lot of small PS domains were observed in the PMMA core though the PS shell was still formed. By stepwise addition of styrene monomer, the formation of the small PS domain was depressed and complete core/shell morphology was formed. Absorption/release treatments of toluene into/from the PMMA/PS (1/1 w/w) composite particles resulted in a drastic morphological change from the core/shell structure to a multi- layered one. Received: 2 February 1999 Accepted in revised form: 7 April     

核／壳结构聚丙烯酸酯塑料增韧剂的制备与结构控制

核／壳结构聚丙烯酸酯塑料增韧剂的制备与结构控制张会轩戴英杨海东＊冯之榴（吉林工学院化工系长春１３００１２）（中国科学院长春应用化学研究所１３００２２）关键词聚丙烯酸酯，增韧剂，制备，种子乳液聚合１９９６－０８－２８收稿，１９９７－０１－０６修回国家自...     

Dispersion polymerization of MMA in supercritical CO2 stabilized by random copolymers of 1H,1H–perfluorooctyl methacrylate and 2‐(dimethylaminoethyl methacrylate)

A series of random copolymers, composed of 1H,1H‐perfluorooctyl methacrylate (FOMA) and 2‐dimethylaminoethyl methacrylate (DMAEMA) were prepared as stabilizers for the dispersion polymerization of methyl methacrylate in supercritical CO₂ (scCO₂). Free‐flowing, spherical poly(methyl methacrylate) (PMMA) particles were produced in high yield by the effective stabilization of poly(FOMA‐co‐DMAEMA) containing 34–67 w/w % (15–41 m/m %) FOMA structural units. Less stabilized but micron‐sized discrete particles could be obtained even with 25 w/w % (10 m/m %) FOMA stabilizer. The result showed that the composition of copolymeric stabilizers had a dramatic effect on the size and morphology of PMMA. The particle size was controllable with the surfactant concentration. The effect of the monomer concentration and the initial pressure on the polymerization was also investigated. The dry polymer powder obtained from dispersion polymerization could be redispersed to form stable aqueous latexes in an acidic buffered solution (pH = 2.1) by an electrostatic stabilization mechanism due to the ionization of DMAEMA units in the stabilizer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1365–1375, 2008     

Connection of poly(methyl methacrylate) microgel particles dispersed in poly(vinyl alcohol) matrix by seed polymerization

Poly(methyl methacrylate) microgels covered with poly(hydroxyethyl methacrylate) thin layer was dispersed in poly(vinyl alcohol) matrix. Homogeneous and regular arrangement of the microgel particles was suggested by Bragg diffraction for the films prepared by varying the PVA/microgel ratio (from 6/4 to 3/7 (w/w)). It was proved that the regular arrangement and connection of the microgels by seeded polymerization in poly(vinyl alcohol) were possible. © 1996 John Wiley & Sons, Inc.