Synthesis and characteristics of poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles and their application as drug carriers

In this work, the poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles was synthesized by a three‐step reaction. The first step was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second step was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles. In the third step, the core–shell latex particles were heated in the presence of ammonia solution to form the crosslinking poly(MAA‐NIPAAm) thermosensitive hollow latex particles. The morphologies of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were observed. The influences of crosslinking agent and shell composition on the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were, respectively, studied. Besides, the poly(MAA‐NIPAAm) thermosensitive hollow latex particles were used as carriers to load with the model drug, caffeine. The effect of various variables on the amount of caffeine loading and the efficiency of caffeine release was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5203–5214     

Fast fabrication of superabsorbent polyampholytic nanocomposite hydrogels via plasma‐ignited frontal polymerization

We report the facile synthesis of poly(VI‐co‐MAA) superabsorbent polyampholytic hydrogels (VI = N‐vinylimidazole, MAA = methacrylic acid) via plasma‐ignited frontal polymerization (PIFP). On igniting the top surface of the reactants with air plasma, frontal polymerization occurred and poly(VI‐co‐MAA) hydrogels were obtained within minutes. The preparation parameters were investigated, along with swelling capacity, morphology, and chemical structures of poly(VI‐co‐MAA) hydrogels. Interestingly, the hydrogels are superabsorbent in water and show ampholytic characteristic toward pH. Moreover, the hydrogels are able to capture cationic dyes through electrostatic interaction, offering the potential for further development as dye adsorbents for water purification. In addition, nanocomposite hydrogels were obtained by embedding quantum dots (carbon dots or CdS nanocrystals) into the polymer matrix, which endows the nanocomposite hydrogels with favorable fluorescence and potential applications in bioimaging and biosensing. The results indicate that FP can be applied as an alternative means for facile synthesis of multifunctional hydrogels with additional efficiency and energy‐saving. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 912–920     

Partially fluorinated thermally responsive latices of linear and crosslinked copolymers

A series of thermally responsive copolymers of N-isopropylacrylamide (NIPAAM) with a fluorinated hydrophobic comonomer, either hexafluoroisopropylmethacrylate (HFIPMA) or 2,2,3,3,4,4-hexafluorobutylmethacrylate (HFBMA) and a hydrophilic comonomer, methacrylic acid (MAA), were synthesized by emulsion polymerization. The chemical structures of the copolymers were studied by the IR technique. Dynamic light scattering (DLS) showed that aqueous latices of the copolymers exhibited swelling–deswelling changes typical to PNIPAAM; the degree of swelling as well as the temperature at which the polymers collapse depended on the chemical structure of the comonomers. Endotherms related to the contraction of the polymers were studied by differential scanning calorimetry (DSC). A combination of DLS and DSC results revealed that the hydrophobic and hydrophilic units in the copolymers strongly affected the swelling behavior, as well as the local environment of the PNIPAAM chains. The comonomer HFIPMA increased the hydrophobicity of NIPAAM, reduced the swelling, and caused coagulation of the copolymer of NIPAAM and HFIPMA at temperatures above the critical temperature. Hydrophobicity of HFIPMA also affected the rheological properties of the latex. The HFBMA comonomer increased the swelling of the latex particles. Methacrylic acid added into the associating copolymers made the copolymers to show polyelectrolyte behavior with an increase of swelling and a decrease of the enthalpy change upon the collapse. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2141–2152, 1998     

Synthesis and characteristics of poly(methyl methacrylate‐co‐methacrylic acid)/poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive semi‐hollow latex particles and their application to drug carriers

In this work, the poly(methyl methacrylate‐co‐methacrylic acid)/poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite semi‐hollow latex particles was synthesized by three processes. The first process was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly (MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second process was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and crosslinking agent, N,N′‐methylenebisacrylamide, in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles with solid structure. In the third process, part of the linear poly(MMA‐MAA) core of core–shell latex particles was dissolved by ammonia to form the poly(MMA‐MAA)/poly(MAA‐NIPAAm) thermosensitive semi‐hollow latex particles. The morphologies of the semi‐hollow latex particles show that there is a hollow zone between the linear poly(MMA‐MAA) core and the crosslinked poly(MAA‐NIPAAm) shell. The crosslinking agent and shell composition significantly influenced the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) semi‐hollow latex particles. Besides, the poly(MMA‐MAA)/poly(MAA‐NIPAAm) thermosensitive semi‐hollow latex particles were used as carriers to load with the model drug, caffeine. The processes of caffeine loaded into the semi‐hollow latex particles appeared four situations, which was different from that of solid latex particles. In addition, the phenomenon of caffeine released from the semi‐hollow latex particles was obviously different from that of solid latex particles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3441–3451     

Novel temperature‐responsive water‐soluble copolymers based on 2‐hydroxyethylacrylate and vinyl butyl ether and their interactions with poly(carboxylic acids)

Novel water‐soluble amphiphilic copolymers have been synthesized by free radical copolymerization of 2‐hydroxyethylacrylate with vinyl butyl ether. In water these copolymers exhibit lower critical solution temperature, which depends on the content of hydrophobic vinyl butyl ether units. The interaction between these copolymers and poly(acrylic acid) or poly(methacrylic acid) in aqueous solutions results in formation of interpolymer complexes stabilized by hydrogen bonds and hydrophobic interactions. An increase in hydrophobicity of the copolymers leads to the enhancement of their complex formation ability with respect to poly(acrylic acid) and poly(methacrylic acid). Poly(methacrylic acid) forms stronger complexes with the copolymers when compared with poly(acrylic acid). The complexes exhibit dual sensitivity to pH‐ and temperature and this property may be easily adjusted regulating the strength of interaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 195–204, 2006     

Synthesis and characterization of D‐(−)‐Salicine‐based star copolymers containing pendant carboxyl groups with fluorophore dyes

Salicin was modified to monoacetals and diacetals with bromoester groups (f_Br = 4 and 6) initiating atom transfer radical polymerization (ATRP). These glucoinitiators were used to synthesize 4‐ and 6‐arm star copolymers of tert‐butyl methacrylate (tBMA) and methyl methacrylate (MMA) with different arm polymerization degree (DP_arm = 13 ? 79), and composition (25–75 mol % of tBMA). The transformation of hydrophobic stars into amphiphilics by acidolysis of tert‐butyl groups resulted in copolymers with various contents of hydrophilic fraction based on methacrylic acid (MAA) units (13–75 mol %), which were labeled with fluorescein amine (FA) for the future studies of targeted internalization. The UV spectroscopy and fluorescence measurements of the prepared copolymers confirmed the incorporation of fluorophore moieties (1–14 FA labeled units as max. 5% of total MAA units). The solution properties of star polyacids observed by DLS in a function of a pH show a specific behavior related to the interchain/intrachain interactions yielding particles with diameter sizes in the range from 3 to 15 nm, which can be significantly increased to 180–270 nm by addition of NaCl. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2399–2411     

Ambient temperature ATRP of benzyl methacrylate as a tool for the synthesis of block copolymers with styrene

The rapid atom transfer radical polymerization (ATRP) of benzyl methacrylate (BnMA) at ambient temperature was used to synthesize block copolymers with styrene as the second monomer. Various block copolymers such as AB diblock, BAB symmetric and asymmetric triblock, and ABABA pentablock copolymers were synthesized in which the polymerization of one of the blocks namely BnMA was performed at ambient temperature. It is demonstrated that the block copolymerization can be performed in a controlled manner, regardless of the sequence of monomer addition via halogen exchange technique. Using this reaction condition, the composition (ratio) of one block (here BnMA) can be varied from 1 to 100. It is further demonstrated that in the multiblock copolymer syntheses involving styrene and benzyl methacrylate, it is better to start from the PS macroinitiator compared with PBnMA macroinitiator. The polymers synthesized are relatively narrow dispersed (<1.5). It is identified that the ATRP of BnMA is limited to certain molecular weights of the PS macroinitiator. Additionally, a preliminary report about the synthesis of the block copolymer of BnMA‐methyl methacrylate (MMA), both at ambient temperature, is demonstrated. Subsequent deprotection of the benzyl group using Pd/C? H₂ results in methacrylic acid (MAA)–methyl methacrylate (MAA–MMA) amphiphilic block copolymer. GPC, IR, and NMR are used to characterize the synthesized polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2848–2861, 2006     

Frontal polymerization for smart intrinsic self‐healing hydrogels and its integration with microfluidics

Frontal polymerization (FP) is applied for the synthesis of β‐cyclodextrin/poly(vinylimidazole‐co‐N‐vinylcaprolactam‐co‐acrylic acid) (β‐CD/P(VI‐co‐NVCL‐co‐AA)) copolymers. The dependence of frontal velocity and temperature on the initiator and cross‐linker are discussed. The synthesized copolymers have been characterized by Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The thermo‐pH dual‐stimuli responsive behavior of the hydrogel is determined by swelling measurement at different temperatures and pH values. Besides, the hydrogels show intrinsic self‐healing behavior and their healing efficiency is determined by the mechanical tests. Interestingly, we integrate FP with microfluidic technology, which may realize the execution of FP under continuous condition. Such simple microfluidics‐FP integrated approach has both methodological and practical value for the synthesis of functional materials. This paper mainly presents the synthesis and characterization of β‐cyclodextrin/poly(vinylimidazole‐co‐N‐vinylcaprolactam‐co‐acrylic acid) (β‐CD/P(VI‐co‐NVCL‐co‐AA)) copolymers by using thermal frontal polymerization (TFP). Hydrogels were found to be self‐healing with good mechanical performance and show dual thermo‐pH responsive behavior. Low‐cost, energy‐saving and efficient method of thermal frontal polymerization process was integrated with microfluidics technology to prepare supraball hydrogel. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1412–1423     

ABC triblock polymethacrylates: Group transfer polymerization synthesis of the ABC,ACB, and BAC topological isomers and solution characterization

ABC triblock copolymers of methyl methacrylate (MMA), (dimethylamino)-ethyl methacrylate (DMAEMA), and tetrahydropyranyl methacrylate (THPMA) consisting of 12 units of each type of monomer were synthesized by group transfer polymerization (GTP). These were the three topological isomers with differentblock sequences: DMAEMA₁₂-THPMA₁₂-MMA₁₂, DMAEMA₁₂-MMA₁₂-THPMA₁₂, and THPMA₁₂-DMAEMA₁₂-MMA₁₂. The molecular weights and molecular weight distributions of the copolymers were determined by gel permeation chromatography (GPC) in tetrahydrofuran, and their number-average degrees of polymerization and copolymer compositions were calculated by proton nuclear magnetic resonance spectroscopy (¹H-NMR). These molecular weights and degrees of polymerization corresponded closely to the values expected from the monomer/initiator ratios. The polydispersities were low as expected for GTP, and ranged from 1.09 to 1.25. The three triblocks were chemically modified by converting the THPMA units to methacrylic acid (MAA) units either by thermolysis or acid hydrolysis. The resulting ABC triblock poly-ampholytes were characterized by ¹H-NMR spectroscopy and hydrogen ion titration. Aqueous GPC studies in 1.0M NaCl at pH 8.5 showed that the triblock copolymers form micelles whose size depends on their block sequence. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 617–631, 1998     

Synthesis and properties of water‐soluble azlactone copolymers

Preparation and study of a series of copolymers incorporating 2‐vinyl‐4,4‐dimethylazlactone (VDMA) is reported. The reactivity ratios for photo‐initiated free radical copolymerization of VDMA with methacrylic acid (MAA), acrylic acid (AA), acrylamide (AAm), dimethylacrylamide (DMAA), hydroxyethyl methacrylate (HEMA), methoxy poly(ethylene glycol) methacrylate (MPEG₃₀₀MA), and 2‐methacryloyloxyethyl phosphorylcholine (MPC), were determined by fitting comonomer conversion data obtained by in situ ¹H NMR to a terminal copolymerization equation. Semi‐batch photo‐copolymerizations were then used to synthesize the corresponding VDMA copolymers with constant composition. Their solubility and dissolution behavior, as well as their hydrolysis half‐lives under physiological conditions, were determined. P(VDMA‐co‐MAA) copolymers with 52 to 93 mol % VDMA showed decreasing initial solubility and increasing hydrolysis half‐lives with increasing VDMA content. VDMA copolymers with nonionic monomers AAm and DMAA were water soluble only at VDMA contents of 41 and 22 mol % or less, respectively, and showed longer hydrolysis half‐lives than comparable MAA copolymers. VDMA copolymers with HEMA and MPEG₃₀₀MA were found to crosslink during storage, so their hydrolysis half‐lives were not determined. VDMA copolymers with 18% zwitterionic MPC showed a much longer half‐life and superior initial solubility compared to analogous p(VDMA‐co‐MAA), identifying this copolymer as a promising candidate for macromolecular crosslinkers in, for example, aqueous layer‐by‐layer co‐depositions with polyamines. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of poly(2‐ethylhexyl methacrylate) copolymers containing pendant,self‐complementary multiple‐hydrogen‐bonding sites

The synthesis and characterization of copolymers containing 2‐ethylhexyl methacrylate and a quadruple‐hydrogen‐bonding site, 2‐ureido‐4[1H]‐pyrimidone methacrylate (UPyMA), are described. An analogous dimeric hydrogen‐bond‐containing copolymer based on 2‐ethylhexyl methacrylate and methacrylic acid (PEHMA‐co‐MAA) was also synthesized for comparative purposes. The glass‐transition temperatures of the poly(2‐ethylhexyl methacrylate‐co‐2‐ureido‐4[1H]‐pyrimidone methacrylate) (PEHMA‐co‐UPyMA) series increased linearly with increasing UPyMA content. Creep compliance measurements as a function of temperature indicated a decrease in the creep compliance with increasing UPyMA content over the range of 1–10 mol % UPyMA. Melt rheological analysis also showed an increase and lengthening of the plateau modulus as a function of frequency with increasing UPyMA content, as well as increasing complex viscosity as a function of temperature. The analogous PEHMA‐co‐MAA copolymer, which contained 11 mol % methacrylic acid, showed, in the melt rheological analysis, behavior similar to that of the PEHMA‐co‐UPyMA copolymer containing only 1 mol % UPyMA units. The multiple‐hydrogen‐bond‐containing copolymers were successfully analyzed with time–temperature superposition for the construction of master curves. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4618–4631, 2005     

Synthesis of pH‐sensitive surfactants by the terpolymerization of methacrylic acid,methoxy poly(ethylene glycol) methacrylate,and lauryl methacrylate: Initiator effect and reactivity ratio study

For the development of pH‐sensitive surfactants to be used in water‐in‐oil fermentation, the free‐radical terpolymerization of methacrylic acid (MAA), methoxy poly(ethylene glycol) methacrylate (MPEGMA), and lauryl methacrylate (LMA), at a molar ratio of 1.0:0.04:0.76, was studied with two initiators, azobisisobutyronitrile (AIBN) and hydrogen peroxide, at different concentrations. The polymer synthesized with 0.45% AIBN as the initiator was the most promising, giving similar conversions of all three monomers throughout the 10‐h polymerization. The subsequent study on AIBN‐initiated systems indicated that MPEGMA caused an increase‐then‐decrease profile of the MAA conversion with a plateau around an ethylene glycol/MAA ratio of 1–2. This observation was fairly consistent with the well‐known type II template polymerization of poly(ethylene glycol) (PEG)–MAA systems. The reactivity ratios obtained in this study suggested that the polymer synthesized with AIBN as the initiator had a structure of alternating blocks of MAA and LMA, with isolated PEG grafts. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2950–2959, 2004     

Thermoresponsive copolymers of methacrylic acid and poly(ethylene glycol) methyl ether methacrylate

Copolymers of methacrylic acid (MAA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) were prepared and their cloud points in aqueous solution were studied as a function of comonomer ratio, solution pH, and presence of hydrophobic comonomers. Under acidic conditions, the cloud point falls below 0 °C for copolymers with between 25% to 60% ether content, because of the formation of hydrophobic H‐bonded ether–acid complexes. The cloud point also decreases with solution pH. For equivalent ether to acid ratios, the cloud point decreases with decreasing PEG chain length, because of the presence of a larger number of hydrophobic methyl and methacrylate groups. Similarly, the cloud point decreases upon incorporation of hydrophobic comonomers such as butyl, lauryl, or glycidyl methacrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6095–6104, 2005     

Libraries of methacrylic acid and oligo(ethylene glycol) methacrylate copolymers with LCST behavior

Homopolymers of methacrylic acid (MAA), monoethyleneglycol methyl ether methacrylate (MEOMA), diethyleneglycol methyl ether methacrylate (MEO₂MA), oligo(ethyleneglycol) methyl ether methacrylate (OEGMA₄₇₅ and OEGMA₁₁₀₀) and oligo(ethyleneglycol) ethyl ether methacrylate (OEGEMA₂₄₆) were synthesized with various chain lengths via reversible addition fragmentation chain transfer (RAFT) polymerization. The homopolymers of MAA, MEOMA and OEGMA₁₁₀₀ did not show any cloud point (CP) in the range of 0–100 °C, whereas at a pH value of 7, the CPs were found to be 20.6, 93.7, and 20.0 °C for p(MEO₂MA), p(OEGMA₄₇₅) and p(OEGEMA₂₄₆), respectively, with an initial monomer to initiator ratio of 50. Furthermore, statistical copolymer libraries of MAA with OEGMA₄₇₅ and OEGMA₁₁₀₀ were prepared. The cloud points of the random copolymers of MAA and OEGMA₄₇₅ were found to be in the range of 20–90 °C; surprisingly, even though the homopolymers of MAA and OEGMA₁₁₀₀ did not exhibit any LCST behavior, the copolymers of these monomers at certain molar ratios (up to 40% OEGMA₁₁₀₀) revealed a double responsive behavior for both temperature and pH. Finally, the cloud points were found to be in the range of 22–98 °C, measured at pH values of 2, 4, and 7, while no cloud point was detected at pH 10. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7138–7147, 2008     

Copolymerization of 2‐isothiocyanatoethyl methacrylate and 2‐hydroxyethyl methacrylate or methacrylic acid based on a nucleophile‐tolerant property of the isothiocyanato group

Radical copolymerizations of 2‐isothiocyanatoethyl methacrylate (ITEMA) and 2‐hydroxyethyl methacrylate (HEMA) or methacrylic acid (MAA) were examined, and fundamental properties of the obtained copolymers were investigated. The copolymerizations of various ITEMA/HEMA or ITEMA/MAA compositions proceeded effectively in THF or DMF by using 2,2′‐azobisbutyronitrile (AIBN) as an initiator, keeping the isothiocyanato groups and hydroxyl or carboxyl groups unchanged. Glass transition temperatures (T_g)s of poly(ITEMA‐co‐HEMA)s ranged from 68 to 100 °C, and they were thermally stable up to 200 °C. Meanwhile, T_gs of poly(ITEMA‐co‐MAA)s (ITEMA/MAA = 91/9, 76/24) were determined to be 91 and 109 °C, respectively. However, poly(ITEMA‐co‐MAA)s were thermally unstable, and significant weight loss was observed around 180 °C, which may be due to an addition of carboxyl groups to isothiocyanato groups followed by an elimination of COS to form amide structure in the copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5221–5229     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

Synthesis and reactions of a poly(methacrylate) from an optically active amino alcohol

Synthesis and radical polymerization of a novel optically active methacrylate, (S)–2–tert–butoxycarbonylamino–3–phenylpropyl methacrylate (MA–F–BOC), were examined. MA–F–BOC was synthesized from methacrylic acid and N–protected (L)–phenylalaninol. Radical polymerization of MA–F–BOC quantitatively afforded the corresponding polymethacrylate with a relatively high molecular weight. Radical copolymerizations of MA–F–BOC were carried out with styrene and acrylamide to afford the copolymers. Radical polymerization of MA–F–BOC in the presence of n–butanethiol afforded the oligomers, whose degrees of polymerizations were 3.3–8.0. The BOC group was completely cloven with HBr to afford the corresponding optically active polymeric amine quantitatively. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 1981–1986, 1998     

Hydrocarbon formation in the pyrolytic decomposition of methacrylate copolymers

A series of methyl methacrylate (MMA)–methacrylic acid (MAA) copolymers containing up to 50% methacrylic acid and the respective homopolymers were reproducibly pyrolyzed at 900°C and the fragments identified by gas chromatography (GC) or GC–mass spectroscopy. It was shown that PMMA and the MMA portions of blocky or random copolymers yielded 99% MMA, while a large portion (50–60%) of the MAA broke down to give a wide variety of hydrocarbons via decarboxylation and/or anhydride formation. Both unsaturated aliphatic and aromatic hydrocarbons, as well as the minor products of the MMA decomposition, support free-radical processes for these decompositions. It was also shown that the copolymers readily complex oxygenated solvents (which did not affect decomposition) and metal ions (which markedly affected the products).     

Microstructural Characterization of Diblock Copolymers Formed by Styrene and Different Methacrylic Units

FT-IR, DSC, and NMR techniques allowed the structural characterization of four copolymers formed by styrene and methacrylic units (methacrylic acid (MAA), dimethylamine ethyl methacrylate (DMAEMA), sodium methacrylate (MANa), and 1-hydroxyethyl methacrylate (HEMA). The copolymer composition was studied by Fourier transform-infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy. The thermal behavior of the block copolymers was analyzed by differential scanning calorimetry (DSC). Three of the four copolymers showed two transitions caused by changes in the polymer heat capacity (ΔCp) of each block. Diffusion-ordered spectroscopy (DOSY) experiments were used to distinguish copolymer from homopolymer mixtures. Finally, the triad-level stereosequences of styrene-methacrylic copolymers were obtained using ¹³C NMR. The results indicate that by increasing the alkyl-substituent length in the methacrylic block, the probability of syndiotactic polymerization increases.     

Collapsed conformation of poly(methacrylic acid) chain containing nonionic hydrophilic units

Copolymers of methacrylic acid (MAA) and a nonionic hydrophilic monomer N-vinylpyrrolidone (NVP) were synthesized by polymerization in aqueous solution in the absence of metal ions. The NVP content of the copolymers ranged from 2 to 36 mole % with sequences of MAA interrupted at random by a single unit of NVP at all compositions. The pH-induced conformational transition of these copolymers was followed by potentiometric titration and viscosity studies and the results were compared with those of pure poly(methacrylic acid) (PMAA). The negative free energy of transition from the un-ionized compact from to expanded structure showed a gradual decrease with increasing NVP content, and the collapsed conformation observable for PMAA at low degrees of ionization (0 < α < 0.3) disappeared at NVP contents greater than 15 mole%. These findings are supported by viscosity data. The results suggest that long-range methyl–methyl hydrophobic contacts still possible in higher NVP content copolymers are not sufficient to bring about the collapse of the molecule and a minimum average sequence length of about 20 MAA units is required to compact the molecule. Hydrophilic “shielding” of MAA chains by NVP segments could also partly destabilize the collapsed structure.