Poly(arylene ether)s and poly(arylene thioether)s containing the 1,2-dihydro-4-phenyl(2H)- phthalazinone moiety

A series of new high molecular weight poly(arylene ether)s containing the 1,2-dihydro-4-phenyl(2H)phthalazinone moiety have been synthesized. The inherent viscosities of these polymers are in the range of 0.33–0.64 dL/g. They are amorphous and readily soluble in chloroform, DMF, and DMAc. The glass transition temperatures of the polymers range from 241 to 320°C and the 5% weight loss temperatures in nitrogen atmosphere range from 473 to 517°C. The hydroxy group in the monomer 1,2-dihydro-4-(4-hydroxyphenyl)(2H)phthalazin-1-one has been selectively transformed into the N,N′-dimethylthiocarbamate group, which was then rearranged to give the S-(N,N′-dimethylcarbamate) group via the Newman–Kwart rearrangement reaction. A series of poly(arylene thioether)s containing the 1,2-dihydro-4-phenyl(2H)phthalazinone moiety have also been synthesized via two types of reactions, a N C coupling reaction and a one-pot reaction between the S-(N,N′-dimethylcarbamate) and activated dihalo compounds, in diphenyl sulfone in the presence of a cesium carbonate and calcium carbonate mixture. These poly(arylene thioether)s also have high glass transition temperatures (ranging from 217–303°C) and high thermal stabilities. Compared with their poly(ether) analogs, the poly(arylene thioether)s have glass transition temperatures several degrees lower, which is attributed to the more flexible C S C bonds. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 455–460, 1998     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of polymeric alcohol bearing oligo(oxyethylene) moiety by radical polyaddition through ketyl radical

Hydrophilic polymers having both oligo(oxyethylene) moieties and tertiary alcohol units in the main chain were prepared by the radical polyaddition of the dike-tones with distyryl compounds by using samarium(II) iodide as an electron transfer agent. Polyaddition of 4,4′-(1,4-phenylene)bis-2-butanone or 6,9-dioxatetradeca-2,13-dione with distyryl compounds such as 1,15-di(4-ethenylphenyl)-2,5,8,11,14-pentaoxapentadecane, 1,18-di(4-ethenylphenyl)-2,5,8,11,14,17-hexaoxaoctadecane, or 1,21-di(4-ethenylphenyl)-2,5,8,11,14,17,20-heptaoxaheneicosane resulted in the formation of the corresponding polymeric alcohols in moderate yields (46–75%). The produced polymers showed high solubility in common solvents, and their molecular weights estimated by GPC (THF, polystyrene standard) were 5200–8100. No serious difference in the molecular weight of the polymer between after and before the treatment with cerium ammonium nitrate indicated that the produced polymers were inert under the oxidative condition where oxidative cleavage of the main chain of poly(vinyl alcohol) takes place. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 715–720, 1997     

Degradable polyesters through chain linking for packaging and biomedical applications

The major route to convert lactic acid to high-molecular-weight polymers is ring-opening polymerization of lactide. We have investigated alternative synthesis routes based on oligomerization and chain linking to produce high-molecular-weight thermoplastic degradable polymers cost-effectively. Chain linking also offers new possibilities to prepare degradable polyesters for biomedical applications by extending the range of polymer properties achievable. In this paper, we briefly review different chain linking techniques used in our laboratory. Typically, lactic acid prepolymers with molecular weights of around 3,000-15,000 g x mol(-1) have been prepared by direct polycondensation. Hydroxyl terminated oligomers have been chain linked by using diisocyanate coupling agents, preferably 1,4-butane diisocyanate, forming poly(ester-urethanes). Poly(ester-amides) have been prepared by using 2,2'-bis(2-oxazoline) as coupling agent for carboxylic acid telechelic oligomers. Chain linking by end functionalization has been used in the preparation of poly(ester-anhydrides). In addition, a variety of crosslinked degradable polymers and copolymers have been synthesized through different crosslinking routes, by using methacrylic, itaconic or maleic double bonds or triethoxysilane moieties. A biodegradation test and ecotoxicological evaluation of the degradation products were carried out in addition to hydrolysis tests. Lactic acid based chain linked polymers were biodegradable and the degradation products were harmless. In hydrolysis tests, enzymatic degradation was pronounced in the chain linked poly(epsilon-caprolactone).     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Star poly(methyl methacrylate) with end‐functionalized arm chains by ruthenium‐catalyzed living radical polymerization

Star polymers with end‐functionalized arm chains (surface‐functionalized star polymers) were synthesized by the in situ linking reaction between ethylene glycol dimethacrylate (linking agent) and an α‐end‐functionalized linear living poly(methyl methacrylate) in RuCl₂(PPh₃)₃‐catalyzed living radical polymerization; the terminal on the surface functionalities included amides, alcohols, amines, and esters. The star polymers were obtained in high yields (75–90%) with initiating systems consisting of a functionalized 2‐chloro‐2‐phenylacetate or ‐acetamide [F? C(O)CHPhCl; F = nPrNH? , HOCH₂CH₂O? , Me₂NCH₂CH₂O? , or EtO? ; initiator] and n‐Bu₃N (additive). The yield was lower with a functionalized 2‐bromoisobutyrate [Me₂NCH₂CH₂OC(O)CMe₂Br] initiator or with Al(Oi‐Pr)₃ as an additive. Multi‐angle laser light scattering analysis showed that the star polymers had arm numbers of 10–100, radii of gyration of 6–23 nm, and weight‐average molecular weights of 1.3 × 10⁵ to 3.0 × 10⁶, which could be controlled by the molar ratio of the linking agent to the linear living polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1972–1982, 2002     

Synthesis and characterization of new copolymers of thiophene and vinylene: Poly(thienylenevinylene)s and poly(terthienylenevinylene)s with thioether side chains

Poly[3,4-bis(3-methylbutylthio)thienylenevinylene], poly[3,4-bis-(S)-(2-methylbutylthio)thienylenevinylene], poly[3′,4′-bis(3-methylbutylthio)-2,2′:5′,2″-terthienylene-5,5″-vinylene], and poly{3′,4′-bis-(S)-[2-methylbutylthio]-2,2′:5′,2″-terthienylene-5,5″-vinylene} have been synthesized. The synthesis starts from the thiophene monomers and trimers, which are formylated to give the corresponding dialdehydes. The dialdehydes are reductively polymerized using a McMurry coupling. The polymers are characterized by GPC, optical spectroscopy (FT-IR, UV-vis, circular dichroism spectroscopy and photoluminescence) and by proton and carbon NMR spectroscopy. The polymers are soluble in common organic solvents, such as THF, chloroform, toluene, benzene and 1,2-dichlorobenzene. The solvatochromism and thermochromism of the polymers in solution are investigated, while the optical activity of the polymers is used to investigate the supramolecular aggregation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4629–4639, 1999     

Pyrolyse eclair de polyisoprenes. Essai de correlation entre les produits de degradation et la microstructure des polymeres

Flash pyrolysis between 500 and 600° of polyisoprenes with the three types of unit (1,4, 3,4 and 1,2) essentially yields isoprene and two cyclic dimers, viz. dipentene and 3,4-dimethyl, 4-vinyl, cyclohexene. These dimers are characteristic of 1,4 and 3,4 units respectively. The yield of dipentene is maximum when the 1,4 units are contained in long blocks; it is formed preferentially by cyclization of the biradical formed from two adjacent 1,4 units. The yield of the other dimer is maximum when the chain contains isolated 3,4 units; it is formed preferentially by Diels-Alder condensation between free isoprene and the pendant isopropenyl group of a 3,4 unit following chain scission. The 1,2 units thermally depolymerize to isoprene. Polyisoprenes made with alkaline earth metals are block copolymers of 1,4 and 3,4 units; polymers made with Ziegler-Natta catalysts have a random microstructure.     

Oxidative polymerization of phenylenediamines catalyzed by horseradish peroxidase

Ortho-, meta-, and para-phenylenediamines were polymerized using hydrogen peroxide as an oxidant and horseradish peroxidase as a catalyst in mixed solvents of 1,4-dioxane and water. The yield of the polymers was strongly dependent on solvent composition, and maximum yields were obtained at 15–30% 1,4-dioxane. The analysis of circular dichroic spectra of the enzyme suggested that enzyme structure was significantly modified at high 1,4-dioxane contents, which may be responsible for the decrease of catalytic activity of the enzyme. On the basis of IR and electronic spectra of the polymers, it was considered that o- and p-phenylenediamine polymers retain disubstituted benzene nuclei, which suggests that the polymerization proceeded mainly via N—N coupling. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2593–2600, 1998     

Hydroxyl chain‐end functionalization of polymeric organolithium compounds with oxetane

Hydroxyl chain‐end functionalizations of polymeric organolithium compounds with oxetane (trimethylene oxide) were studied in benzene at 25 °C. Functionalizations of poly(styryl)lithium and polystyrene‐oligo‐butadienyllithium proceed efficiently to form the corresponding ω‐hydroxypropyl‐functionalized polymers in 98 and 97% isolated yields, respectively. No nonfunctional polymer (≤1–2%) was detected by thin layer chromatography (TLC) analysis for either polymer. All functionalized polymers were characterized by ¹³C and ¹H NMR analyses; no evidence for oxetane oligomerization at the chain end was observed. The MALDI‐TOF mass spectrum of ω‐hydroxypropylpolystyrene was consistent with the expected structure without any detectable oligomerization of oxetane. A small, but detectable series of peaks corresponding to nonfunctional polystyrene was also observed in the MALDI‐TOF mass spectrum. The functionalization of the adduct of 1,1‐diphenylethylene and PSLi produced the corresponding ω‐hydroxypropyl‐functionalized polymer in only 86% isolated yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2684–2693, 2006     

Synthesis,photophysics, structure‐tunable photoluminescence,and electrochemical properties of soluble poly(p‐phenylenevinylene)‐based polymers with adjacent 1,3,4‐oxadiazoles in the backbone

Three new poly(p‐phenylenevinylene)‐based polymers containing two 1,3,4‐oxadiazole moieties in the main chain per repeat unit were synthesized by Heck coupling. A single, double, or triple bond was introduced between the oxadiazoles to provide a means for modifying the polymer properties. The polymers were readily soluble in common organic solvents and showed T_g values lower than 50 °C. The color of the emissive light in both the solid state and the solution could be tuned by a change in the nature of the bond between the oxadiazole rings. The polymers emitted ultraviolet‐green light in solution with a photoluminescence (PL) emission maximum at 345–483 nm and blue‐green light at 458–542 nm in thin films. The PL quantum yields in solution were 0.36–0.43. The electrochemical properties are affected by the nature of the bond between the oxadiazoles as well. In polymers with a single bond between the oxadiazoles, a lower ionization potential was observed than in polymers with a double or triple bond. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3079–3090, 2005     

Preparation of 3‐arm star polymers (A3) via Diels–Alder click reaction

Diels–Alder click reaction was successfully applied for the preparation of 3‐arm star polymers (A₃) using furan protected maleimide end‐functionalized polymers and trianthracene functional linking agent (2) at reflux temperature of toluene for 48 h. Well‐defined furan protected maleimide end‐functionalized polymers, poly (ethylene glycol), poly(methyl methacrylate), and poly(tert‐butyl acrylate) were obtained by esterification or atom transfer radical polymerization. Obtained star polymers were characterized via NMR and GPC (refractive index and triple detector detection). Splitting of GPC traces of the resulting polymer mixture notably displayed that Diels–Alder click reaction was a versatile and a reliable route for the preparation of A₃ star polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 302–313, 2008     

聚苯乙烯基偶氮聚合物的合成研究

改进了聚苯乙烯的硝化、还原、重氮化和偶合反应路线 (NRDC) ,使每步反应都得到很高的产率 ,并利用大分子重氮盐 (MDS)分别与苯胺、N 烃基苯胺和酚等三类化合物偶合 ,得到相应的聚苯乙烯基偶氮聚合物 .核磁共振分析结果证明了产物的高偶联率 .通过对大分子重氮盐热稳定性的研究 ,发现偶合反应之后需要一步加热反应以消除残余重氮基团 .还研究了这些聚合物的紫外 可见吸收光谱性质 ,氨 (胺 )基偶氮产物的水溶液表现出了明显的pH敏感性     

Hydrocarbon polymers containing six-membered rings in the main chain. Microstructure and properties of poly(1,3-cyclohexadiene)

The relationship between the microstructure and the properties of poly(1,3-cyclohexadiene)s, obtained by living anionic polymerization with an alkyllithium/amine system, and their hydrogenated derivatives are reported. The 1,2-bond/1,4-bond molar ratio of poly(1,3-cyclohexadiene) was determined by measuring 2D-NMR with the H H COSY method. The glass transition temperature of poly(1,3-cyclohexadiene) was found to rise with an increase in the ratio of 1,2-bonds to 1,4-bonds or with an increase of the number average molecular weight. The 1,2-bond of the polymer chain gives a high flexural strength and heat distortion temperature. Hydrogenated poly(1,3-cyclohexadiene) has the highest T_g (231°C) among all hydrocarbon polymers ever reported. 1,3-Cyclohexadiene–butadiene–1,3-cyclohexadiene triblock copolymer and 1,3-cyclohexadiene–styrene–1,3-cyclohexadiene triblock copolymer have high heat resistance and high mechanical strength. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1657–1668, 1998     

Functionalization of polymeric organolithium compounds with 3,4‐epoxy‐1‐butene: Precursors for diene‐functionalized macromonomers

The functionalization of polymeric organolithiums (PLi) with 3,4‐epoxy‐1‐butene (EPB) in a hydrocarbon solution yielded the corresponding hydroxybutene‐functionalized polymers in high yields (>95%). Three modes of addition of PLi to EPB were observed (1,4, 3,4, and 4,3). The products and chain‐end structures were characterized by ¹H NMR, ¹³C NMR, attached‐proton‐test ¹³C NMR, calculated ¹³C NMR chemical shifts, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). The regioselectivity of the addition depended on the PLi chain‐end structure, the reaction conditions, and the addition of lithium salts or Lewis bases. In the absence of additives, the functionalization of poly(styryl)lithium (PSli) produced equal amounts of 1,4‐, 3,4‐, and 4,3‐addition, as determined by quantitative ¹³C NMR analysis. The use of a low temperature (6 °C), inverse addition, the addition of triethylamine (TEA; [TEA]/[PSLi] = 20) as a Lewis base, or dienyllithium chain ends produced polymers with only the 1,4‐addition product. Mild dehydration of the hydroxybutene‐functionalized polymer with p‐toluenesulfonic acid produced the corresponding diene‐functionalized macromonomer, as shown by MALDI‐TOF MS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 947–957, 2003     

Narrow disperse polymers using amine functionalized dithiobenzoate RAFT agent and easy removal of thiocarbonyl end group from the resultant polymers

A novel amine functionalized RAFT agent, 2‐cyanoprop‐2‐yl(4‐N,N‐dimethylaminophenyl) dithiobenzoate has been synthesized and used to control the polymerization of vinyl monomers. This dithiobenzoate RAFT agent, although air sensitive, controlled the polymerization of MMA and St very well in an inert atmosphere and the polymerization results obtained were marginally better than using the most popular 2‐cyanoprop‐2‐yl dithiobenzoate RAFT agent. The living nature of these polymerizations was confirmed by kinetics study and chain extension reactions to yield narrow disperse di‐block copolymers. Most importantly, use of this novel RAFT agent simplified the removal procedure of the color causing end thiocarbonyl group from the RAFT derived polymers and thereby leading to polymers with improved appearance. The removal of end group from the polymer was confirmed by ¹H NMR and UV‐vis spectroscopic techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poly(thienyl‐phenylene)s with macromolecular side chains by oxidative polymerization of well‐defined macromonomers

Well‐defined polystyrene (PSt), poly(ε‐caprolactone) (PCL) or poly(2‐methyloxazoline) (POx) based polymers containing mid‐ or end‐chain 2,5‐ or 3,5‐dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP), ring opening polymerization (ROP), or cationic ring opening polymerization (CROP). These polymers were subsequently modified by Suzuki type coupling reactions with 2‐thiophene boronic acid. The resulting polymers, containing a conjugated sequence with 2‐thienyl groups at the extremities, could be further used as macromonomers in chemical oxidative polymerization in the presence of anhydrous FeCl₃. Poly(thienyl‐phenylene)s having the respective PSt or PCL chains as lateral subtituents were obtained in this way. All the starting, intermediate, or final polymers were structurally analyzed by spectroscopic methods (¹H and ¹³C NMR, IR) and gel permeation chromatography (GPC) measurements. Thermal behavior of the macromonomers and final polymers was investigated by differential scanning calorimetry (DSC) analyses. Optical properties of the polymers were monitored by UV and fluorescence spectroscopy. The emission spectra of the polymers show a clear bathochromic shift of the λ_max emission in all the cases with respect to the monomers because of the extending of the conjugation length. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 848–865, 2007.     

A versatile method for cyclic polymers from conjugated and unconjugated vinyl monomers

A versatile method was introduced to prepare cyclic polymers from both conjugated and unconjugated vinyl monomers. It was developed on the combination of the RAFT polymerization and the self‐accelerating double strain‐promoted azide‐alkyne click (DSPAAC) reaction. In this approach, a switchable chain transfer agent 1 was designed to have hydroxyl terminals and a functional pyridinyl group. The protonation and deprotonation of pyridinyl group endowed the chain transfer agent 1 with a switchable control capability to RAFT polymerization of both conjugated and unconjugated vinyl monomers. Based on this, RAFT polymerization and the following hydroxyl end group modification were used to prepare various azide‐terminated linear polymers including polystyrene, poly(N‐vinylcarbazole), and polystyrene‐block‐poly(N‐vinylcarbazole). Using sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, the corresponding cyclic polymers were then prepared via the DSPAAC reaction between DBA and azide terminals of the linear precursors. Due to the self‐accelerating property of DSPAAC reaction, this bimolecular ring‐closing reaction could efficiently produce the pure cyclic polymers using excess molar amounts of DBA to linear polymer precursors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1811–1820     

Synthesis of novel oligoester‐block‐polyacrylate‐block‐oligoester ABA triblock copolymers by coupling methods

An original approach based on coupling methodology was used to prepare novel well‐defined ABA triblock copolymers, made of polyester‐type chain ends (A) associated with a polyacrylate midblock (B). Poly(ethylene terephthalate)‐block‐poly(lauryl acrylate)‐block‐poly(ethylene terephthalate) (PET‐b‐PLAc‐b‐PET) copolymers were achieved from poly(ethylene terephthalate)‐b‐poly(lauryl acrylate) (PET‐b‐PLAc) diblock ones. The first step consisted in the synthesis of diblock copolymers by atom transfer radical polymerization of lauryl acrylate starting from PET segment as a macroinitiator. In the second step, the coupling of diblock copolymers was achieved using four different methods, which were evaluated and compared: atom transfer radical coupling, “click” chemistry using the Huisgen's reaction, and coupling via a dithiol reagent or a diisocyanate molecule. Coupling using the Huisgen's reaction or a diisocyanate spacer proved to be the most efficient techniques. Even if these methods showed limitation and were only adapted for copolymers with low molecular weights, we managed to successfully prepare ABA triblock copolymers involving a polyester segment as end blocks and a polyacrylate moiety as midblock. To our knowledge, such kind of chemical structure has never been reported before and would be useful, possibly affording physical networks leading to rheological modification, for instance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of block and star copolymers by photoinduced radical coupling process

The general design for the synthesis of AB diblock, and A₂B and AB₂ star copolymers based on the statistical coupling of poly(styrene) (PSt) and poly (methyl methacrylate) (PMMA) macromolecules containing photoreactive benzophenone is presented. For this purpose, mono- and bifunctional initiators for Atom Transfer Radical Polymerization (ATRP) bearing benzophenone group were synthesized and characterized. End- and mid-chain benzophenone functional PSt and PMMA with low molecular weights were obtained by ATRP using these initiators in the presence of CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalytic complex. Poly(styrene-block-methyl methacrylate) (PSt-b-PMMA) copolymers were prepared by photolysis of the solutions containing end functional PSt and PMMA in THF at λ = 350 nm for 60 min in the presence of a hydrogen donor such as N-methyldiethanolamine (NMDEA). The proposed mechanism assumes hydrogen abstraction of photoexcited benzophenone moiety by NMDEA. Ketyl radicals resulting from abstraction reaction undergo radical-radical coupling to form benzpinacol structure at the core. Formation of A₂B and AB₂ type star copolymers upon irradiation of solutions containing appropriate combinations of end- and mid-chain functional polymers was also demonstrated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2938–2947, 2009