Impact of model perfumes on surfactant and mixed surfactant self-assembly

The impact of some model perfumes on surfactant self-assembly has been investigated, using small-angle neutron scattering. A range of different model perfumes, with differing degrees of hydrophilicity/hydrophobicity, have been explored, and in order of increasing hydrophobicity include phenyl ethanol (PE), rose oxide (RO), limonene (LM), linalool (LL), and dihydrogen mercenol (DHM). The effect of their solubilization on the nonionic surfactant micelles of dodecaethylene monododecyl ether (C12EO12) and on the mixed surfactant aggregates of C12EO12 and the cationic dialkyl chain surfactant dihexadecyl dimethyl ammonium bromide (DHDAB) has been quantified. For PE and LL the effect of their solubilization on the micelle, mixed micelle/lamellar and lamellar regimes of the C12EO12/DHDAB mixtures, has also been determined. For the C12EO12 and mixed DHDAB/C12EO12 micelles PE is solubilized predominantly at the hydrophilic/hydrophobic interface, whereas the more hydrophobic perfumes, from RO to DHM, are solubilized predominantly in the hydrophobic core of the micelles. For the C12EO12 micelles, with increasing perfume concentration, the more hydrophobic perfumes (RO to DHM) promote micellar growth. Relatively modest growth is observed for RO and LM, whereas substantial growth is observed for LL and DHM. In contrast, for the addition of PE the C12EO12 micelles remain as relatively small globular micelles, with no significant growth. For the C12EO12/DHDAB mixed micelles, the pattern of behavior with the addition of perfume is broadly similar, except that the micellar growth with increasing perfume concentration for the more hydrophobic perfumes is less pronounced. In the Lbeta (Lv) region of the DHDAB-rich C12EO12/DHDAB phase diagram, the addition of PE results in a less structured (less rigid) lamellar phase, and ultimately a shift toward a structure more consistent with a sponge or bicontinuous phase. In the mixed L1/Lbeta region of the phase diagram PE induces a slight shift in the coexistence from Lbeta toward L1. The addition of LL to the Lbeta (Lv) region of the DHDAB-rich C12EO12/DHDAB phase diagram also results in a reduction in the lamellar structure (less rigid lamellae), and a shift toward a structure more consistent with a sponge or bicontinuous phase, or a coexisting phase of small vesicles. For the mixed L1/Lbeta region of the phase diagram LL induces a shift toward a greater L beta component.     

Self-assembly in mixed dialkyl chain cationic-nonionic surfactant mixtures: dihexadecyldimethyl ammonium bromide-monododecyl hexaethylene glycol (monododecyl dodecaethylene glycol) mixtures

The self-assembly of dialkyl chain cationic surfactant dihexadecyldimethyl ammonium bromide, DHDAB, and nonionic surfactants monododecyl hexaethylene glycol, C(12)E(6), and monododecyl dodecaethylene glycol, C(12)E(12), mixtures has been studied using predominantly small-angle neutron scattering, SANS. The scattering data have been used to produce a detailed phase diagram for the two surfactant mixtures and to quantify the microstructure in the different regions of the phase diagram. For cationic-surfactant-rich compositions, the microstructure is in the form of bilamellar, blv, or multilamellar, mlv, vesicles at low surfactant concentrations and is in an L(beta) lamellar phase at higher surfactant concentrations. For nonionic-rich compositions, the microstructure is predominantly in the form of relatively small globular mixed surfactant micelles, L(1). At intermediate compositions, there is an extensive mixed (blv/mlv) L(beta)/L(1) region. Although broadly similar, in detail there are significant differences in the phase behavior of DHDAB/C(12)E(6) and DHDAB/C(12)E(12) as a result of the increasing curvature associated with C(12)E(12) aggregates compared to that of C 12E 6 aggregates. For the DHDAB/C(12)E(12) mixture, the mixed (blv/mlv) L(beta)/L(1) phase region is more extensive. Furthermore, C(12)E(12) has a greater impact upon the rigidity of the bilayer in the blv, mlv, and L(beta) regions than is the case for C(12)E(6). The general features of the phase behavior are also reminiscent of that observed in phospholipid/surfactant mixtures and other related systems.     

Interplay between the surface adsorption and solution-phase behavior in dialkyl chain cationic-nonionic surfactant mixtures

Neutron reflectivity, NR, and surface tension have been used to study the adsorption at the air-solution interface of mixtures of the dialkyl chain cationic surfactant dihexadecyl dimethyl ammonium bromide (DHDAB) and the nonionic surfactants monododecyl triethylene glycol (C12E3), monododecyl hexaethylene glycol (C12E6), and monododecyl dodecaethylene glycol (C12E12). The adsorption behavior of the surfactant mixtures with solution composition shows a marked departure from ideal mixing that is not consistent with current theories of nonideal mixing. For all three binary surfactant mixtures there is a critical composition below which the surface is totally dominated by the cationic surfactant. The onset of nonionic surfactant adsorption (expressed as a mole fraction of the nonionic surfactant) increases in composition as the ethylene oxide chain length of the nonionic cosurfactant increases from E3 to E12. Furthermore, the variation in the adsorption is strongly correlated with the variation in the phase behavior of the solution that is in equilibrium with the surface. The adsorbed amounts of DHDAB and the nonionic cosurfactants have been used to estimate the monomer concentration that is in equilibrium with the surface and are shown to be in reasonable qualitative agreement with the variation in the mixed critical aggregation concentration (cac).     

Micellar Interactions in Nonionic/Ionic Mixed Surfactant Systems

To study the influence of the chemical nature of headgroups and the type of counterion on the process of micellization in mixed surfactant systems, the cmc's of several binary mixtures of surfactants with the same length of hydrocarbon tail but with different headgroups have been determined as a function of the monomer composition using surface tension measurements. Based on these results, the interaction parameter between the surfactant species in mixed micelles has been determined using the pseudophase separation model. Experiments were carried out with (a) the nonionic/anionic C(12)E(6)/SDS ((hexa(ethyleneglycol) mono-n-dodecyl ether)/(sodium dodecyl sulfate)), (b) amphoteric/anionic DDAO/SDS ((dodecyldimethylamine oxide)/(sodium dodecyl sulfate)), and (c) amphoteric/nonionic C(12)E(6)/DDAO mixed surfactant systems. In the case of the mixed surfactant systems containing DDAO, experiments were carried out at pH 2 and pH 8 where the surfactant was in the cationic and nonionic form, respectively. It was shown that the mixtures of the nonionic surfactants with different kinds of headgroups exhibit almost ideal behavior, whereas for the nonionic/ionic surfactant mixtures, significant deviations from ideal behavior (attractive interactions) have been found, suggesting binding between the head groups. Molecular orbital calculations confirmed the existence of the strong specific interaction between (1) SDS and nonionic and cationic forms of DDAO and between (2) C(12)E(6) and the cationic form of DDAO. In the case for the C(12)E(6)/SDS system, an alternative mechanism for the stabilization of mixed micelles was suggested, which involved the lowering in the free energy of the hydration layer. Copyright 2000 Academic Press.     

Surface and solution behavior of the mixed dialkyl chain cationic and nonionic surfactants

The surface and solution behavior of the mixed dialkyl chain cationic and nonionic surfactant mixture of dihexadecyldimethylammonium bromide, DHDAB, and hexaethylene monododecyl ether, C12E6, has been investigated, using primarily the scattering techniques of small-angle neutron scattering and neutron reflectivity. Within the time scale of the measurements, the adsorption of the pure component C12E6 at the air-solution interface shows no time dependence. In contrast, the adsorption of the DHDAB/C12E6 mixture and pure DHDAB has a pronounced time dependence. The characteristic time for adsorption varies with surfactant concentration, composition, and temperature. It is approximately 2-3 h for the DHDAB/C12E6 mixture, dependent upon concentration and composition, and approximately 50 min for DHDAB. At the air-solution interface, the equilibrium composition of the adsorbed layer shows a marked departure from ideal mixing, which is dependent upon both the solution concentration and the concentration of added electrolyte. In contrast, the composition of the aggregates in the bulk solution that are in equilibrium with the surface is close to ideal mixing, as expected for solution concentrations well in excess of the critical micellar concentration. The structure of the mixed adsorbed layer has been measured and compared with the structure of the equivalent pure surfactant monolayer, and no substantial changes in structure or conformation are observed. The extreme departure from ideal mixing in the adsorption behavior of the DHDAB/C12E6 mixture is discussed in the context of the structure of the adsorbed layer, changes in the underlying solution structures, and the failure of regular solution theory to predict such behavior.     

Effect of added poly(oxyethylene)dodecyl ether on the phase and rheological behavior of wormlike micelles in aqueous SDS solutions

Upon the addition of a short EO chain nonionic surfactant, poly(oxyethylene) dodecyl ether (C12EOn), to dilute micellar solution of sodium dodecyl sulfate (SDS) above a particular concentration, a sharp increase in viscosity occurs and a highly viscoelastic micellar solution is formed. The oscillatory-shear rheological behavior of the viscoselastic solutions can be described by the Maxwell model at low shear frequency and combined Maxwell-Rouse model at high shear frequency. This property is typical of wormlike micelles entangled to form a transient network. It is found that when C12EO4 in the mixed system is replaced by C12EO3 the micellar growth occurs more effectively. However, with the further decrease in EO chain length, phase separation occurs before a viscoelastic solution is formed. As a result, the maximum zero-shear viscosity is observed at an appropriate mixing fraction of surfactant in the SDS-C12EO3 system. We also investigated the micellar growth in the mixed surfactant systems by means of small-angle X-ray scattering (SAXS). It was found from the SAXS data that the one-dimensional growth of micelles was obtained in all the SDS-C12EOn (n=0-4) aqueous solutions. In a short EO chain C12EOn system, the micelles grow faster at a low mixing fraction of nonionic surfactant.     

Formation of Cubic-Phase Microemulsions with Anionic and Cationic Surfactants at Equal Amounts of Oil and Water

The formation and microstructure of cubic phases were investigated in anionic and cationic surfactant-containing systems at 25 degrees C. In the system sodium dodecyl sulfate(SDS)-dodecyltrimethylammonium bromide(DTAB)-water, mixing of two surfactants shows the phase transition hexagonal phase (H(1))-->surfactant precipitate, accompanied by an obvious decrease in the cross-sectional area per surfactant in the rod micelles of the hexagonal liquid crystal. In the mixed systems brine(A)-dodecane(B)-SDS(C)-DTAB(D)-hexanol(E), the isotropic discontinuous cubic phase is formed from the H(1) phase at a low cationic surfactant weight fraction, Y=D/(C+D), and from the lamellar phase at high Y upon dilution with equal amounts of oil and brine, respectively. The minimum surfactant concentration to form the cubic phase decreases with increases both in cationic surfactant weight fraction Y from 0 to 0.30 and in hexanol weight fraction, W(1)=E/(C+D+E), accordingly. The maximum solubilization for oil of the cubic phase reaches 43 wt% at 14 wt% of mixed surfactants and alcohol. Copyright 2000 Academic Press.     

SOLUBILIZATION IN MIXED REVERSE MICELLAR SYSTEMS OF AOT/NONIONIC SURFACTANTS/n-HEPTANE

Solubilization of water and aqueous NaCl solutions in mixed reverse micellar systems of anionic surfactant AOT and nonionic surfactants in n-heptane was studied. It was found that the maximum solubilization capacity of water was higher in the presence of certain concentrations of NaCl electrolyte, and these concentrations increased with the increase of nonionic surfactant content and their EO chain length. Soluibilization capacity was enhanced by mixing AOT with nonionic surfactants. The observed phenomena were interpreted in terms of the stability of the interfacial film of reverse micellar microdroplet and the packing parameter of the surfactant that formed mixed reverse micelles.     

Calorimetric study on the temperature dependence of the formation of mixed ionic/nonionic micelles

The differential excess enthalpy of mixed micelle formation was measured at different temperatures by mixing nonionic hexa(ethylene glycol) mono n-dodecyl ether with anionic sodium dodecyl sulfate or cationic dodecylpyridinium chloride. The experimental data were obtained calorimetrically by titrating a concentrated surfactant solution into a micellar solution of nonionic surfactant. The composition and the size of the mixed nonionic/ionic micelles at different surfactant concentrations were also determined. Pronounced differences in both composition and excess enthalpy were found between the anionic and the cationic mixed system. For both systems, the excess enthalpies become more exothermic with increasing temperature, but for the anionic mixed system an additional exothermic contribution was found which was much less temperature dependent. Temperature dependence of the excess enthalpy was attributed to the effect of the ionic headgroup on the hydration of the ethylene oxide (EO) groups in the mixed corona. Ionic headgroups located in the ethylene oxide layer cause the dehydration of the EO chains resulting in an additional hydrophobic contribution to the enthalpy of mixing. A high affinity of sodium dodecyl sulfate for nonionic micelles and an extra exothermic and less temperature dependent contribution to the excess enthalpy found for the SDS-C(12)E(6) system might be attributed to specific interactions (hydrogen bonds) between the sulfate headgroup and the partly dehydrated EO chain.     

Kinetics of alkaline fading of methyl violet in micellar solutions of surfactants: Comparing Piszkiewicz's,Berezin's,and pseudophase ion-exchange models

The micellar effect of surfactants of various types on the rate of the reaction between methyl violet and hydroxide ion is studied. The absorption spectra show that the cation of methyl violet is bound by micelles of all types at proper concentrations of surfactants. The observed rate constant in micellar systems containing nonionic Brij-35, zwitterionic 3-(dimethyldodecylammonio)-propanesulfonate, cationic cetyltrimethylammonium bromide and hydroxide surfactants is higher, whereas in solutions of the anionic surfactant sodium dodecylsulfate is lower than that one in the surfactant-free system. Piszkiewicz's, Berezin's, and pseudophase ion-exchange models of the kinetic micellar effect are used for the treatment of the dependences of the above-mentioned constants on the surfactant concentration. The values of the corresponding kinetic parameters are compared and discussed. The influence of nonionic, zwitterionic, and anionic micelles on the reaction rate is discussed on the basis of medium and concentration kinetic effects. The character of the cationic micelles effect is somewhat paradoxical. Although the observed pseudo–first-order reaction rate constant substantially increases in the presence of such micelles, the second order-rate constant in these micelles is lower than the corresponding value in surfactant-free aqueous solution. As a possible explanation, the decrease in the reactivity of the HO^– ions is proposed, owing to their electrostatic association with the cationic headgroups (“diverting effect”).     

Self-assembly in complex mixed surfactant solutions: the impact of dodecyl triethylene glycol on dihexadecyl dimethyl ammonium bromide

The impact of the nonionic surfactant, dodecyl triethyleneglycol ether (C(12)E(3)) on the solution microstructure of the dialkyl chain cationic surfactant, dihexadecyl dimethyl ammonium bromide, (DHDAB) has been investigated. The variation in solution microstructure has been studied using a combination of small angle neutron scattering, ultra small angle neutron scattering, optical texture and photon correlation spectroscopy. At low surfactant concentrations (1.5 mM) the microstructure takes the form of bilamellar vesicles (BLV) for compositions containing less than 20 mol % of added C(12)E(3). Multilamellar vesicles (MLV) are the predominant microstructure for solutions richer in composition than 20 mol % C(12)E(3). At more than 80 mol % C(12)E(3), the solution microstructure reverts to that of a lamellar phase dispersion consistent with studies on the pure nonionic surfactant. At higher concentrations (60 mM) a wide continuous L beta phase region is observed for compositions in the range 20 to 80 mol % C(12)E(3). The fine details of the phase diagram were obtained from quantitative analysis of the SANS data using a well-established lamellar membrane model. Irrespective of the nonionic content, the bilayers are in general highly rigid, consistent with those stabilized by charge interactions. Furthermore estimates of the product of membrane moduli (compressibility and bending modulus) indicate that the different phase regions have very different membrane properties, however the magnitude of the variations observed are not predicted using existing theoretical treatments.     

正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

Mixed spherical and wormlike micelles: a contrast-matching study by small-angle neutron scattering

Small-angle neutron scattering studies were used to investigate the effect of adding an alcohol ethoxylate nonionic surfactant (d-C12E20) to aqueous solutions of a cationic surfactant, erucyl bis(hydroxyethyl) methylammonium chloride (EHAC), with and without salt (KCl). The systematic use of contrast-matching, by alternately highlighting or hiding one of the surfactants, confirms that mixed micelles are formed. In salt-free solutions, mixed spherical micelles are formed and a core-shell model combined with a Hayter-Penfold potential was used to describe the data. The core radius is dominated by the EHAC tails and the outer radius determined by the ethoxylate headgroups of the nonionic surfactant. Addition of KCl promotes micellar growth; however, results of varying the solvent contrast revealed that when the nonionic surfactant is incorporated into the wormlike structure micellar breaking is promoted. Thus, mixed wormlike micelles with shorter contour lengths compared to the pure EHAC worms are formed.     

Impacting the length of wormlike micelles using mixed surfactant systems

The effect of adding an alcohol ethoxylate nonionic surfactant (C(18)E(18)) to aqueous solutions of a cationic surfactant, erucyl bis(hydroxyethyl) methylammonium chloride (EHAC,CH(3)(CH(2))(7)(CH)(2)(CH(2))(12)N(+)-(CH(2)CH(2)OH)(2)CH(3)Cl(-)), was studied using small-angle neutron scattering (SANS), steady-state rheology, and cryo-transmission electron microscopy (Cryo-TEM). This cationic surfactant has the ability to self-assemble into giant wormlike micelles in the presence of an electrolyte, such as KCl. In salt-free solutions, the mixture of the two surfactants gave rise to spherical micelles. The scattering curves obtained were fitted with a polydisperse core-shell model combined with a Hayter Penfold potential. The inner and outer radii were found to be dependent on the surfactant ratio. In the presence of KCl, mixed wormlike micelles were formed. However, further addition of C(18)E(18) promoted the breaking of the micellar worms with the appearance of a structure peak in the scattering curves. In addition, it was found that the low shear viscosity is decreased upon addition of the alcohol ethoxylate nonionic surfactant. These findings are in good qualitative agreement with the Cryo-TEM images. The results show that the addition of the nonionic surfactant to the system is a method of controlling the worm length.     

Spectrophotometric studies of anionic dye-cationic surfactant interactions in mixture of cationic and nonionic surfactants

The interaction between an anionic dye C.I. Reactive Orange 16 (RO16) and a cationic surfactant dodecylpyridinium chloride (DPC) in mixtures of DPC and nonionic surfactants poly(oxyethylene)ethers (C(m)POE(n); m = 12, 16 and 18, n = 4, 10 and 23) are investigated spectrophotometrically in a certain micellar concentration range. The spectrophotometric measurements of dye-surfactant systems are carried out as function of mole fraction of surfactant at four different temperatures. For this reason, a typical system was occurred at 1.0 x 10(-2) mol l(-1) for surfactants and at 1.0 x 10(-4) mol l(-1) for dye concentrations. The formation of DPC-RO16 complex in the C(m)POE(n) solutions of different mole fractions in its micellar concentration range have been determined and compared to those obtained in the binary mixtures. From the spectrophotometric measurements has been observed that the addition of nonionic surfactant in to the mixture of DPC-RO16, causes a significant increase of the value of absorbance. This increase explains that the stability of DPC-RO16 complex is reduced in the presence of nonionic surfactant micelles. It can be seen from results; in mixed surfactant solutions, there are DPC-C(m)POE(n) and RO16-C(m)POE(n) interactions in addition to DPC-RO16 interaction. Since the solubilizaton of the DPC-RO16 complex has been appeared in the C(m)POE(n) solution, our results support the conclusion that adding C(m)POE(n) influences the hydrophobic-hydrophilic balance of the studied complex. Furthermore effect of the alkyl chain length and the number of poly(oxyethylene) in nonionic surfactant on values of absorbance have been investigated.     

Length control in rigid cylindrical nanoassembly by tuning molecular interactions in aqueous solutions

We have studied aqueous micellar solutions of nonionic surfactant (pentaethylene glycol mono-n-dodecyl ether, C12E5) doped by cationic surfactant (dodecyl trimethylamoniumbromide, DTAB) as a function of doping level, using small angle neutron scattering. At a doping level of at least 6 mol %, rigid cylindrical micelles formed and the local cylindrical structure of the doped micelles showed no variation across the range of doping levels covered in this study (0-10 mol %). However, the total micellar length decreased rapidly as doping level increased, following well the prediction of micellar aggregation number based on molecular-thermodynamic theory. There was no synergistic interaction between surfactants, leading to monotonically decreasing the micellar aggregation number (shortening of the micellar length).     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.     

Self-assembly of mixed anionic and nonionic surfactants in aqueous solution

We present the phase diagram and the microstructure of the binary surfactant mixture of AOT and C(12)E(4) in D(2)O as characterized by surface tension and small angle neutron scattering. The micellar region is considerably extended in composition and concentration compared to that observed for the pure surfactant systems, and two types of aggregates are formed. Spherical micelles are present for AOT-rich composition, whereas cylindrical micelles with a mean length between 80 and 300 ? are present in the nonionic-rich region. The size of the micelles depends on both concentration and molar ratio of the surfactant mixtures. At higher concentration, a swollen lamellar phase is formed, where electrostatic repulsions dominate over the Helfrich interaction in the mixed bilayers. At intermediate concentrations, a mixed micellar/lamellar phase exists.     

An NMR study of translational diffusion and structural anisotropy in magnetically alignable nonionic surfactant mesophases

The diffusion of both water and surfactant components in aqueous solutions of the nonionic surfactant "C12E6"--which includes hexagonal, cubic, lamellar, and micellar mesophases--has been studied by pulsed-field-gradient NMR. Diffusion coefficients were measured in unaligned samples in all of these phases. They were also obtained in the hexagonal and lamellar phases in oriented monodomain samples that were aligned by slow cooling from the micellar phase in an 11.7 T magnet. Measured water and soap diffusion coefficients in the NMR-isotropic cubic and (high-water-content) micellar phases as well as diffusion anisotropy measurements in the magnetically aligned hexagonal phase were quantitatively consistent with the constituent structures of these phases being identical surfactant cylinders, with only the fraction of surface-associated water varying with the water-soap molar ratio. The values of the water and soap diffusion coefficients in the oriented lamellar phase suggest an increase in defects and obstructions to soap diffusion as a function of increasing water content, while those in the low-water-content micellar phase rule out the presence of inverse micelles.