Microporous polyurethanes: Synthesis and investigation of the mechanism of the pore formation

A new approach for microporous polymeric material is developed utilizing the secondary interactions such as hydrogen bonding in the polymer chains in polyurethane systems at ambient conditions. A new series of highly rigid, thermally stable, and readily soluble cycloaliphatic polyurethanes were designed and synthesized for this purpose, based on new tricyclodecanedimethanol and 1,4‐cyclohexanedimethanol. The hydrogen‐bonding interactions induce phase separation in solution, which leads to polymer‐rich and solvent‐rich domains; subsequent evaporation of the solvent molecules results in micropores. The phase‐separation process in the polyurethane is found to be highly dependent on the chemical structures of the polymer chain backbone. ¹H NMR titration experiments were carried out to understand the mechanism of the micropore formation and its dependence on different structural subunits. The hydrogen‐bonding association constant (K) obtained from the titration experiments revealed that higher the K‐value more the tendency to form micropores. A fully cycloaliphatic polyurethane produces micropores of sizes ranging from 1 to 8 μm, and each pore is separated by 10^?20 μm, whereas the replacement of one of the cyclic unit in the backbone disturbs the entire phase‐separation process and results in nonporous morphology. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1296–1308, 2006     

三维有序SiC空心球的制备及表征

以三维有序多孔碳为模板, 以聚甲基硅烷(PMS)为前驱体, 经过前驱体的渗入、交联和陶瓷转化以及多孔碳模板的烧除, 制备了长程三维有序SiC空心球. 所制备的SiC空心球的外径(135-896 nm)、 球壳厚度(14-79 nm)、 BET比表面积(50.8～5.0 m2/g)及微孔体积(0.265～0.038 cm3/g)受不同孔径的多孔碳模板(150-1 000 nm)或不同前驱体浓度的控制. 所制备的SiC空心球以hcp结构排列成长程三维有序的序列.     

Synthesis of ionic polyurethanes with pyrene rings: Spectral properties and fluorescence quenching study

Hydrophilic ionic polyurethanes with 4‐chloromethylphenylcarbamoyl‐1‐oxymethylpyrene located on the quaternary ammonium structure from a polymer based on poly(ethylene glycol), isophorone diisocyanate, and N‐methyldiethanolamine were prepared by a quaternization reaction, in which the amount of pyrene covalently attached to the polymeric backbone ranged from 1.14 to 19.82 mmol of fluorophore/100 g of polymer. It was interesting to compare the photoluminescence of the pyrene polyurethane carrying a few mole percent of pyrene moieties with that of a third polymer resulting from its subsequent quaternization with benzyl chloride up to a concentration of ionic groups as in the latter (quaternization degree = 14.15%). The process of excimer formation between the pyrene molecules attached to the ionic polyurethane was investigated in tetrahydrofuran (THF), dimethylformamide, film, and THF/H₂O to illustrate the expected differences in the polymer behavior compared with that of the starting pyrene derivative. The formation of aggregates or core–shell micelles was sustained by the fluorescence data, which indicated the existence of pyrene units in the ground state of the molecule, giving rise thus to an explanation for the high excimer‐to‐monomer intensity ratio. The fluorescence decay of pyrene polyurethanes in the presence of various concentrations of nitrobenzene used as a quencher was analyzed too when the fluorescence quenching in the polymer solution normally followed Stern–Volmer kinetics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3945–3956, 2005     

Highly ordered nanoporous TiO2 and its photocatalytic properties

Hexagonally packed nanoporous TiO₂ has been developed by a self-templating electrochemical anodization method on titanium foil. The template is made by a two-step anodization process, where highly ordered hexagonally packed dimples are formed on titanium surface through self-organization. The template is then subjected to a third anodization process with a fast voltage ramp rate, from which a highly ordered porous structure is obtained. Such a material with an ordered structure shows enhanced photocatalytic activity as compared to titania nanotube.     

热致相分离法制备聚合物微孔材料

热致相分离是一种制备聚合物微孔材料的有效方法。本文介绍了聚合物初始浓度、聚合物分子量、稀释剂、冷却速率、萃取剂、聚合物密度等因素对热致相分离法制备聚合物微孔材料的影响,并对热致相分离法制备新型微孔材料的最新研究进展进行了综述。     

Thermally induced color change in electrospun fiber mats

Electrospinning is a process that employs a high static electrical potential to produce polymeric fibers of nanoscale diameter. The process has been utilized to achieve color change by electrospinning black polymer solutions to produce white fiber mats. When subsequently heated, the electrospun mats undergo a color change from white to black. This phenomenon is demonstrated with three polymer/solvent systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 752–757, 2004     

Templated nanostructured PS‐b‐PEO nanotubes

With anodic aluminum oxide (AAO) membranes as wetting templates, nanotubes of the cylinder‐forming polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) copolymer were generated. The PS‐b‐PEO solution was introduced into the cylindrical nanopores of an AAO membrane by capillary force and polymeric nanotubes formed after solvent evaporation. Because of the water solubility of the cylindrical PEO microdomains and the orientation of the cylindrical PEO microdomains with respect to the nanotube walls, the nanotubes were permeable to aqueous media. PS‐b‐PEO nanotubes were also prepared on the interior walls of amorphous carbon nanotubes (a‐CNTs). Because of the unique water permeability of the PEO microdomains, an avenue for functionalizing the interior of the a‐CNTs is enabled. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2912–2917, 2007     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010     

Polymeric spheres on substrates from a spin-coating process

Formation of polymeric spheres in nanometer to sub-micrometer is achieved through a spin-coating process with polyamide (from 4,4(')-(hexafluoroisopropylidene)dianiline and 4,4(')-dicarboxydiphenylether) solutions in N,N-dimethylformamide and N,N-dimethylacetamide. The formation of polymeric spheres and their sizes are dependent on the polymer solution concentrations and the rates in spin-coating. The polymeric spheres could be obtained on various substrates including silicon, mica, and glass.     

Self‐assembling directed synthesis of a novel terephthalamide‐bridged ladderlike polysiloxane

A novel, soluble terephthalamide‐bridged ladderlike polysiloxane ( L ) was synthesized successfully for the first time by stepwise coupling polymerization. The process involved the hydrogen‐bonding self‐assembly of amido groups, which resulted in the formation of a more highly ordered polymeric structure. A novel monomer, bis(3‐methyldimethoxysilylpropyl) terephthalamide ( M ), was prepared by a hydrosilylation reaction in the presence of dicyclopentadienyl platinum dichloride as a catalyst. The structures of the monomer ( M ) and the polymer ( L ) were characterized by Fourier transform infrared, ¹H NMR, ¹³C NMR, ²⁹Si NMR, mass spectrometry, X‐ray diffraction, differential scanning calorimetry, and vapor pressure osmometry. All the characterization data indicated that the synthesized polymer ( L ) possessed an ordered ladderlike structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3161–3170, 2002     

A facile method for the preparation of monodisperse hollow silica spheres with controlled shell thickness

This article presents a facile, effective, mild synthesis process for well‐defined hollow spheres by using cationic polystyrene (PS) submicro‐particles as templates. In this approach, the cationic PS templates can be first prepared via emulsifier‐free polymerization by using the cationic monomer 2‐(methacryloyloxy) ethyltrimethylammonium chloride as comonomer, then, the silica shells from the sol‐gel process of tetraethoxysilane were coated on the surfaces of template particles via electrostatic interaction, finally the PS was dissolved in situ by modification of the reaction conditions in the same medium to form monodisperse hollow silica spheres with controlled shell thickness. Fourier transform‐infrared spectroscopy, thermogravimetric analysis, Brunauer‐Emmett‐Teller, transmission electron microscopy, and scanning electron microscope measurements were used to characterize these hollow silica spheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1332–1338, 2010     

Theoretical modeling of the relationship between Young's modulus and formulation variables for segmented polyurethanes

We describe a new modeling approach to prediction of Young's modulus of segmented polyurethanes. This approach combines micromechanical models with thermodynamic considerations based on the theory of block copolymers. The resulting model predicts both the equilibrium morphology and the “ideal” Young's modulus of a segmented polyurethane polymer as a function of its formulation (hard segment chemical structure, hard segment weight fraction, soft segment equivalent weight) and temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2123–2135, 2007     

Fine structure and formation mechanism of particulate phase‐inversion poly(vinylidene fluoride) membranes

The structure and formation mechanism of a microporous phase‐inversion poly(vinylidene fluoride) (PVDF) membrane exhibiting a relatively loosely packed agglomerate of semicrystalline globules are explored. The membrane has been prepared by the coagulation of a solution of PVDF in dimethylformamide by the action of 1‐octanol, which is a soft nonsolvent. Experimental observations pertain to the globule surface, which is dominated by a grainy nanostructure; the globular interior, which exhibits a range of fine structures (e.g., twisted sheets and treelike branches); and the globule–globule connections, which exhibit a sheetlike or ropelike structure. On the basis of the observed structural details and phase diagram considerations, it is proposed that the membrane structure is the result of a unique combination of a polymer crystallization and a liquid–liquid phase‐separation process, with end‐result globular structural features of remarkable uniformity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1578–1588, 2003     

Self-organization process of ordered structures in linear and star poly(styrene)-poly(isoprene) block copolymers: Gaussian models and mesoscopic parameters of polymeric systems

Mesoscopic simulations of linear and 3-arm star poly(styrene)-poly(isoprene) block copolymers was performed using a representation of the polymeric molecular structures by means of Gaussian models. The systems were represented by a group of spherical beads connected by harmonic springs; each bead corresponds to a segment of the block chain. The quantitative estimation for the bead-bead interaction of each system was calculated using a Flory-Huggins modified thermodynamical model. The Gaussian models together with dissipative particle dynamics (DPD) were employed to explore the self-organization process of ordered structures in these polymeric systems. These mesoscopic simulations for linear and 3-arm star block copolymers predict microphase separation, order-disorder transition, and self-assembly of the ordered structures with specific morphologies such as body-centered-cubic (BCC), hexagonal packed cylinders (HPC), hexagonal perforated layers (HPL), alternating lamellar (LAM), and ordered bicontinuous double diamond (OBDD) phases. The agreement between our simulations and experimental results validate the Gaussian chain models and mesoscopic parameters used for these polymers and allow describing complex macromolecular structures of soft condensed matter with large molecular weight at the statistical segment level.     

Synthesis of poly(vinyl ether) polyols with pendant oxyethylene chains and properties of hydrophilic,thermo‐responsive polyurethanes prepared therefrom

Hydroxy‐terminated telechelic poly(vinyl ether)s with pendant oxyethylene chains were synthesized by the reaction of the CH₃CH(OCOCH₃)? O[CH₂]₄O? CH(OCOCH₃)CH₃/Et_1.5AlCl_1.5/THF‐based bifunctional living cationic polymers of 2‐methoxyethyl vinyl ether (MOVE), 2‐ethoxyethyl vinyl ether (EOVE), and 2‐(2‐methoxyethoxy)ethyl vinyl ether (MOEOVE) with water and the subsequent reduction of the aldehyde polymer terminals with NaBH₄. The obtained poly(vinyl ether) polyols were reacted with an equimolar amount of toluene diisocyanates [a mixture of 2,4‐ (80%) and 2,6‐ (20%) isomers] to give water‐soluble polyurethanes. The aqueous solutions of these polyurethanes caused thermally induced precipitation at a particular temperature depending on the sort of the thermosensitive poly(vinyl ether) segments containing oxyethylene side chains. These polyurethanes also function as polymeric surfactants, lowered the surface tension of their aqueous solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1641–1648, 2010     

Monolithic biocompatible and biodegradable scaffolds for tissue engineering

The state of the art in polymeric materials for tissue engineering as well as the needs and concerns for future medical applications are outlined and discussed and brought into relation to recent developments in polymer chemistry. Particularly, the recent developments in micro‐ and nano‐structured polymeric monoliths designed for these purposes will be discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2219–2227, 2009     

Initiation of radical polymerization by peroxyacetates: Polymer end-group analysis by electrospray ionization mass spectrometry

End-groups of poly(methyl methacrylate) from radical solution polymerization of MMA using tert-butyl peroxyacetate (TBPA), tert-amyl peroxyacetate (TAPA), 1,1,2,2- tetramethylpropyl peroxyacetate (TMPPA), and 1,1,3,3-tetramethylbutyl peroxyacetate (TMBPA) as the initiators were analyzed via electrospray ionization mass spectrometry (ESI-MS). The type and the relative concentration of the radical species, which actually initiate macromolecular growth, are determined. In the majority of cases, these species differ from the primary radicals from thermal decomposition of the peroxyacetates. Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was applied for unambiguous peak assignment. The methylcarbonyloxyl radical, which is formed by the decomposition of all peroxyacetates, was found to undergo decarboxylation yielding an initiating methyl radical. TAPA- and TMPPA-derived alkoxyl radicals mainly show β-scission, TMBPA-derived alkoxyl radicals additionally undergo a 1,5-hydrogen-shift reaction. The tert-butoxyl radicals produced from TBPA undergo pronounced chain-transfer reaction prior to their decomposition into methyl radicals and acetone. In the case of using benzene as a relatively inert solvent, the tert-butoxyl radicals exhibit transfer to monomer yielding polymer molecules, which do not carry any initiator-derived end-groups. By using mesitylene as a cosolvent, small amounts of star polymer were generated via multiple hydrogen abstraction by tert-butoxyl radicals from the three individual methyl groups of mesitylene. This uncomplicated procedure of modification of end-group and polymer topology may be attractive for facile adjustment of polymer viscosity in technical processes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2453–2467, 2007     

Focused ion beam micromachining and computation of polymeric photonic band gap

This article introduces a new approach to the achievement of low cost devices for optical telecommunications. For this purpose, the implementation of polymer components and of the WDM method show several advantages. A polymeric photonic band gap lattice can effectively assume demultiplexing at the wavelength of 1.55 μm without energy dissipation. First, the computation of the geometrical parameters designing a polymer photonic crystal by means of the finite‐difference‐time‐domain method, implemented with Bloch functions, is presented here. Second, the achievement of 2D polymer lattices by a dry process, the focused ion beam milling, is exposed. The experimental conditions for the achievement of a master are discussed on the basis of the milling performances and of the polymers physical properties. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2993–3002, 2007     

Linear polyurethanes derived from alditols and diisocyanates

A set of linear [m,n]‐type polyurethanes was synthesized by polycondensation in solution from hexamethylene diisocyanate and 4,4′‐methylene‐bis(phenyl isocyanate) with alditols. Threitol, arabinitol, and xylitol bearing the secondary hydroxy groups blocked as methyl ethers were used. Either regioregular or nonregioregular polymers (depending on the configuration of the alditol) were obtained in high yields and with number‐average molecular weights within the 20,000–30,000 range. All these polyurethanes were amorphous with T_g being highly dependent on the aliphatic or aromatic nature of the diisocyanate used, but scarcely depending on the chemical structure of the alditol moiety. They were found to be stable up to near 300 °C, decomposing at higher temperatures through a complex three‐stage mechanism. Polyurethanes obtained from threitol did not show significant enhancement of hydrolytic degradability as compared with polyurethanes obtained from 1,4‐butanediol. Conversely, polyurethane prepared from xylitol and hexamethylendiisocyanate was found to be almost fully hydrolyzed in 1 month when incubated in water either at 80 °C and pH 7.4 or at 37 °C and pH 10. It was concluded that the alditol size seems to be of prime importance in determining the hydrodegradability of these sugar containing polyurethanes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4109–4117, 2007