Design,Synthesis, and Properties of Substituted Polyacetylenes

This article reviews recent topics on the polymerization of substituted acetylenes, focusing on the synthesis of poly(diphenylacetylenes) and the living polymerization of phenylacetylenes. Diphenylacetylene (DPA) polymerizes with TaCl_s-n-Bu₄Sn to give a polymer which is thermally very stable but insoluble in any solvents. DPAs with various groups (e.g.,p-Me₃Si,m-Me₃Ge, p-t-Bu,and_p-PhO) polymerize similarly. These polymers are soluble and their M¯_w's reach 1 × 10⁶ to 3 × 10⁶. Some of them are more gas-permeable than poly(dimethylsiloxane). Several acetylenes (e.g., ClC -n-C₆H₁₃ and HCUC-t-Bu) have been found to undergo living polymerization with MoOCl₄-n-Bu₄Sn-EtOH. Whereas phenylacetylene (PA) does not polymerize in a living fashion, ortho-substituents in PA more or less suppress termination and chain transfer. PAs with bulky ortho groups (e.g., CF₃ and Me₃Ge) especially undergo virtually ideal living polymerization.     

Thermodynamic study of perfluorohexane + ether mixtures: VLE, LLE, and H

Vapour–liquid equilibria (VLE), liquid–liquid equilibria (LLE), and excess enthalpies (H^E) of binary mixtures of perfluoro-n-hexane plus an ether (diethyl, dipropyl, dibutyl, butyl methyl, and butyl ethyl ether), have been determined using a head-space gas-chromatographic technique, a turbidimetric apparatus, and a heat-flow calorimeter, respectively. A recently designed titration technique and calculation procedure have been used to obtain H^E from heats of solution. The observed liquid–liquid coexistence curves have been compared with those predicted by the activity coefficients γ_i and their temperature dependence. All mixtures are strongly endothermic (H^E > 0) and show large positive deviations from ideality (G^E > 0), which increase with the size of the ether. Molecular interactions have been examined by calculating and discussing solvation functions and Kirkwood–Buff (KB) integrals. Perfluorohexane proved to be an inert molecule that interacts with ethers more weakly than hexane.     

Synthesis of(+)-(2S, 6S)-trans-α-Irone and of(-)-(2S, 6S)-trans-γ-Irone

A 3:1 mixture of (+)-(2S, 6S)-trans-α-irone ((+)-1) and (?)-(2S, 6S)-trans-γ-irone (?)-2) has been synthesized with ca. 70% e. e. by the ene reaction of (?)-(S)-3 and but-3-yn-2-one.     

UV, VUV and soft X-ray photoabsorption of dimethyl ether by dipole (e,e) spectroscopies

Absolute UV and VUV photoabsorption oscillator strengths (cross-sections) for the valence shell discrete and continuum regions of dimethyl ether (CH₃OCH₃, DME) have been measured from 5 to 32 eV using high resolution (HR) (0.05 eV f.w.h.m.) dipole (e,e) spectroscopy. A wide-range spectrum, spanning the UV, VUV and soft X-ray regions, from 5 to 200 eV has also been obtained at low resolution (LR) (1 eV f.w.h.m.), and this has been used to determine the absolute oscillator strength scale by employing valence shell Thomas–Reiche–Kuhn (i.e., S(0)) sum-rule normalization. The presently reported HR and LR absolute photoabsorption oscillator strengths are compared with previously published data from direct photoabsorption measurements in those limited energy regions where such data are available. Evaluation of the S(−2) sum using the presently reported absolute differential photoabsorption oscillator strength data gives a static dipole polarizability for dimethyl ether in excellent agreement (within 0.5%) with previously reported polarizability values. Other dipole sums S(u), (u=−1,−3,−4,−5,−6,−8,−10), and logarithmic dipole sums L(u), (u=−1 to −6), are also determined from the presently reported absolute differential photoabsorption oscillator strength data using dipole sum rules.     

The synthesis of lin-benzoreumycin,lin-benzo-1-methylxanthine,and lin-benzo-1,9-dimethylxanthine

Commencing with 7-chloro-3-methylquinazoline-2,4(1H,3H)-dione ( 9a ), a five step synthesis of 7-methylpyrimido[5,4-g]-1,2,4-benzotriazine-6,8(7H,9H)-dione (lin-benzoreumycin, 6 ) has been accomplished. A synthesis of 1,7-dimethylpyrimido[5,4-g]-1,2,4-benzotriazine-6,8(1H,7H)-dione (lin-benzotoxoflavin, 5 ) employing an intermediate from the preparation of 6 (i.e., 7-chloro-3-methyl-6-nitroquinazoline-2,4(1H,3H)-dione, 9b ) was attempted but could not be accomplished beyond the dihydro precursor of 5 (i.e., 12 ). Compound 9b did lead to successful preparations of 7-methylimidazo[4,5-g]quinazoline-6,8(5H,7H)-dione (lin-benzo-1-methylxanthine, 7 ) and 3,7-dimethylimidazo[4,5-g]quinazoline-6,8(5H,7H)-dione (lin-benzo-1,9-dimethylxanthine, 8 ) by first reacting 9b with ammonia (for 7) or methylamine (for 8 ) followed by reductive cyclization in formic acid.     

A convenient and facile synthesis of pyridine,pyridazine, pyrimido‐[4,5‐c]pyridazine,pyrido[3,4‐c]pyridazine, 1,6‐naphthyridine and phthalazine derivatives

Ethyl 2‐arylhydrazono‐3‐butyrates 2 reacted with 2‐cyano‐N‐(4‐methylphenyl) acetamide 1a and 2‐cyano‐N‐(thiazol‐2‐yl)acetamide 1b to give the pyridinedione, 4 and pyridazine 5 derivatives in 3:1 ratio. The products 4 and 5 have been transformed into different phthalazine, pyrimido[4,5‐c]‐pyridazine, pyrido[3,4‐c]pyridazine and 1,6‐naphthyridine derivatives. The chemical structures have been confirmed by analytical and spectral analysis.     

Synthesis,Photophysics, and Electroluminescence of Poly(dibenzofluorene)s

Summary: A series of soluble poly(dibenzofluorene) derivatives that contain dibenzo[a,g]fluorene, dibenzo[a,i]fluorene, and dibenzo[c,g]fluorene repeat units in the main chain have been synthesized, characterized, and explored as emissive materials in polymer light emitting diodes (PLEDs). These polymers possess higher glass transition temperatures (108–133 °C) than that of poly(2,7‐(9,9‐dialkyl)fluorene) (PFO). The photophysical and electrochemical properties of these polymers are affected by the steric hindrance effect. These polymers emit blue light in dilute solution (378–400 nm) and in the solid state (426–447 nm). As emissive materials in PLEDs, blue electroluminescence with a brightness of up to 3 130 cd · m⁻² is obtained from single‐layer diodes of P₂ with aluminum/barium in air.

The photophysical and electrochemical properties of these polymers are affected by the size effect.     

Biphenyl-tricarbonylchrom-komplexe, 9. Mitt.: Synthesen,chromatographische Enantiomerentrennung,Circulardichroismus und Chiralität von mono- und bis-(Tricarbonylchrom)-Komplexen di- und tetrasubstituierter sowie überbrückter Biphenyle

Chiral title compounds have been resolved by medium pressure liquid chromatography (MPLC) on triacetylcellulose in ethanol. Whereas a quantitative separation was achieved for16 and20, a recycling technique had to be applied to1,4,6,10 and15 leading to a 100% e.e. for1,6 and15 and to ca. 60% e.e. for4 and10.An unambiguous assignment of the chirality (+)-(R) _a -(S) _m for tricarbonylchromium-6,6-dimethyl-diphenicacid dimethylester (4) was deduced both from the photochemical decomplexation to (-)-5 with the known chirality (R) _a (whose e.e. was determined by MPLC on triacetylcellulose) and by comparison of the¹H-n.m.r. spectra of4 and5 thereby proving the structure 4 for the former.Other chiralities both for mono and bis(tricarbonylchromium)biphenyl complexes were established by chemical correlations and comparison of the CD spectra with those of key compounds.

Herrn Prof. Dr.H. Tuppy mit besten Wünschen zum 60. Geburtstag gewidmet.     

Synthesis and Biological Applications of Some Novel Spiro Heterocycles Containing 1,3,4‐Thiadiazine,Thiazole, and Oxazole Derivatives

2‐Ethoxy carbonylcyclopentanone (1) has been brominated to yield 2‐bromo‐2‐ethoxy carbonylcyclopentanone (2) which on further reaction with substituted thiosemicarbazones, thiocarbohydrazones, thiocarbamides and carbamides has furnished 1 ‐ thia‐3,4‐diaza‐5,7‐dioxo‐2‐[(substituted benzylidine)‐amino]spiro[4.5]dec‐2‐ene (3a–e) , 1‐thia‐3,4‐diaza‐5,7‐dioxo‐2‐[(substituted benzylidine)‐hydrazino] spiro[4.5]dec‐2‐ene (4a–e) , 1‐thia‐3‐aza‐2‐(substituted imino)‐4,6‐dioxo‐spiro[4.4]nonane (5a–f) and 1‐oxa‐3‐aza‐2‐(substituted imino)‐4,6‐dioxo‐spiro[4.4]nonane (6a–g) respectively. The structures of the compounds have been elucidated on the basis of spectral analysis.     

Noncovalent Interaction of Uridine 5′-Monophosphate with Adenosine, Cytidine, and Thymidine, as well as Adenosine 5′-Monophosphate and Cytidine 5′-Monophosphate in Aqueous Solution

Adduct formation has been studied in the systems of uridine 5′-monophosphate (UMP) with adenosine (Ado), cytidine (Cyd), thymidine (Thd), adenosine 5′-monophosphate (AMP), and cytidine 5′-monophosphate (CMP) by the potentiometric method with computer analysis of the data and ¹³C and ³¹P NMR spectroscopic measurements. It has been established that in the complexes identified, ion–dipole and dipole–dipole interactions occur with the positive reaction centers being protonated nitrogen atoms N(3) of UMP or Thd, and at low pH values, endocyclic nitrogen atoms of the other nucleosides and nucleotides, as e.g., in (UMP)H₂(Ado). The negative reaction centers are the high-electron density atoms N(1) and N(7) from Ado or AMP and N(3) from Cyd or CMP, and the phosphate group of the nucleotides studied, which already undergo partial deprotonation at low pH values. The NMR results have established the presence of noncovalent stacking-type interactions in certain molecular complexes, e.g., (UMP)H₂(AMP). The sites of ion–dipole or dipole–dipole interactions are generated as a result of deprotonation of the nucleosides and nucleotides in the pH range of formation of molecular complexes. Analysis of the equilibrium constants of the reaction allowed a determination of the effectiveness of the phosphate groups and donor atoms of heterocyclic rings in the process of molecular complex formation.     

Eigenschaften und Verwendbarkeit des 10, 11-Dihydro-5H-dibenzo[a,d]cyclohepten-5-yl-Rests (= 5-Dibenzosuberyl-Rests) als neue Schutzgruppe für Amine,Aminosäuren,Alkohole, Thiole und Carbonsäuren

Properties and suitability of the 10,11-dihydro-5 H-dibenzo[a, d]cyclohepten-5-yl group (= 5-dibenzosuberyl group) as a new protecting group for amines, amino-acids, alcohols, thiols and carboxylic acids. The 10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-yl group (5-dibenzosuberyl group): has been found useful for protecting amines, alcohols, thiols, and carboxylic acids. Furthermore, the investigated 5-amino compounds are extremely stable in strongly acidic media (e. g. in hydrogen bromide) and still the amino group is easily cleaved under mild conditions, such as those used for N-trityl compounds (e.g. boiling in dilute acetic acid or catalytic hydrogenation). Hence this ring system could be a valuable and adaptable protecting group, especially in peptide chemistry.     

Solute–solvent interactions of oligo(m-benzamide)s in N,N-dimethylacetamide

Studies on solute–solvent interactions of oligo(m-benzamide)s in N,N-dimethylacetamide (DMA) have been carried out. The enthalpies of solution have been measured for oligo(m-benzamide)s and oligo(m-phenylene)s in DMA and benzene. Contributions of enthalpies of cavitation and dispersion interaction to the enthalpy of transfer from benzene to DMA, ΔH_tr (Ben → DMA), have been examined for oligo(m-phenylene)s. A considerable contribution of excess enthalpy, ΔH_E (Ben → DMA), to ΔH_tr (Ben → DMA) has been found, which increases with the number of benzene rings of the solute. By assuming that ΔH_E (Ben → DMA) of diphenyl (DP) is equal to that of benzanilide (BA) in DMA, the amide hydrogen bond enthalpy of BA in DMA, ΔH estimated by “the pure base method” corrected for the enthalpies of cavitation and dispersion interaction. The ΔH value has been given by the following expression including the unknown solubility parameter of BA, δ^BA: The evaluation of δ^BA has resulted in the conclusion that ?ΔH is smaller than 10.9 kJ mol^?1. Moreover, ΔH_tr (TMU → DMA) for oligo(m-benzamide)s has been examined. It has been shown that the amide hydrogen bonding ability of DMA is lower than that of TMU. The linearity of the plot of ΔH_tr (TMU → DMA) against the number of amide bonds in the molecule has been explained by the increase in hydrogen bond enthalpies with the number of amide bonds in the molecule.     

Trends of the bonding effect on the performance of DFT methods in electric properties calculations: A pattern recognition and metric space approach on some XY2 (X = O,S and Y = H,O, F,S, Cl) molecules

A test set of 10 molecules (open and ring forms of ozone and sulfur dioxide as well as water and hydrogen sulfide and their respective fluoro‐ and chloro‐substituted analogs) of specific atmospheric interest has been formed as to assess the performance of various density functional theory methods in (hyper)polarizability calculations against well‐established ab initio methods. The choice of these molecules was further based on (i) the profound change in the physics between isomeric systems, e.g., open (C_2v) and ring (D_3h) forms of ozone, (ii) the relation between isomeric forms, e.g., open and ring form of sulfur dioxide (both of C_2v symmetry), and (iii) the effect of the substitution, e.g., in fluoro‐ and chloro‐substituted water analogs. The analysis is aided by arguments chosen from the information theory, graph theory, and pattern recognition fields of Mathematics: In brief, a multidimensional space is formed by the methods which are playing the role of vectors with the independent components of the electric properties to act as the coordinates of these vectors, hence the relation between different vectors (e.g., methods) can be quantified by a proximity measure. Results are in agreement with previous studies revealing the acceptable and consistent behavior of the mPW1PW91, B3P86, and PBE0 methods. It is worth noting the remarkable good performance of the double hybrid functionals (namely: B2PLYP and mPW2PLYP) which are for the first time used in calculations of electric response properties. © 2009 Wiley Periodicals, Inc. J Comput Chem 2010     

Gyroscope‐Like Molecules Consisting of PdX2/PtX2 Rotators within Three‐Spoke Dibridgehead Diphosphine Stators: Syntheses,Substitution Reactions,Structures, and Dynamic Properties

Threefold intramolecular ring‐closing metatheses of trans‐[MCl₂(P{(CH₂)_mCH?CH₂}₃)₂] are effected with Grubbs’ catalyst. Following hydrogenation catalyzed by [RhCl(PPh₃)₃], the title complexes trans‐[MCl₂(P((CH₂)_n)₃P )] (n=2m+2; M/n=Pt/14, 4 c ; Pt/16, 4 d ; Pt/18, 4 e ; Pd/14, 5 c ; Pd/18, 5 e ) and sometimes isomers partly derived from intraligand metathesis, trans‐[MCl₂{P(CH₂)_n(CH₂)_n}P (CH₂)_n)] ( 4′c–e , 5′e ), are isolated. These react with LiBr, NaI, and KCN to give the corresponding MBr₂, MI₂, and M(CN)₂ species (58–99 %). ¹³C NMR data show that the MX₂ moieties rapidly rotate within the diphosphine cage on the NMR timescale, even at ?120 °C. The reaction of 4 c and KSCN gives separable Pt(NCS)₂ and Pt(NCS)(SCN) adducts ( 13 c , 28 %; 14 c , 20 %), and those of 4 c , e and Ph₂Zn give PtPh₂ species ( 15 c , 61 %; 15 e , 90 %). ¹³C NMR spectra of 13 c – 15 c show two sets of CH₂ signals (ca. 2:1 intensity ratios), indicating that MX₂ rotation is no longer rapid. Reactions of 4 c or 4′c and excess NaC?CH afford the free diphosphines P{(CH₂)₁₄}₃P (91 %) and (CH₂)₁₄P (CH₂)₁₄P(C H₂)₁₄ (90 %). The latter has been crystallographically characterized as a bis(BH₃) adduct. The crystal structures of eight complexes with P(CH₂)₁₄P linkages (PtCl₂, PtBr₂, PtI₂, Pt(NCS)₂, PtPh₂, PdCl₂, PdBr₂, PdI₂) and 15 e have been determined, and intramolecular distances analyzed with respect to MX₂ rotation. The conformations of the (CH₂)₁₄ moieties and features of the crystal lattices are also discussed.     

新型含吡啶酰胺基希夫碱多齿配体的合成,光谱,晶体结构及抑菌活性研究

采用稀释法与胺5倍过量合成了一种新型的含吡啶环的开链二胺1a（N，N′-双(2-氨基乙基)－2，6-吡啶二甲酰胺）。此外，合成了六个新型多齿希夫碱配体N，N′－双(β－R－苯甲醛亚胺基乙基)－2，6－吡啶二甲酰胺[其中，R=H(2a)，o-OH(2b)，p-OH(2c)，m-NO₂(2d)，p- N(CH₃)₂(2e)]及N，N′-双[γ-水杨醛亚胺基正丙基]－2，6－吡啶二甲酰胺2f。通过元素分析,紫外－可见光谱，红外光谱，氢核磁共振谱及质谱对化合物进行了表征。通过化合物2e的单晶结构X－射线单晶衍射分析表明该晶体属于立方晶系P－1空间群，其晶胞参数为：a=11.010(2) nm，b=13.865(3) nm，c=9.6537(19) nm，α=102.77(2)º，β=92.07(3)º，γ=87.98(3)º，V=1435.7(5) nm³，Z=2，D_c=1.230 mg•cm^-3，M_r=531.66。微量热法检测了化合物对大肠杆菌的抑制作用，并初步分析了化合物结构与抗菌活性之间的关系。实验结果表明，所有化合物都对大肠杆菌有抑制作用，其中水杨醛希夫碱的抑菌活性最好。     

New Ternary Phosphides Ln25Ni49P33 (Ln = Ce,Pr, Nd,Sm, Gd,Tb, Dy,Ho, Er)

New ternary phosphides Ln₂₅Ni₄₉P₃₃ (Ln = Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er) have been synthesized by arc melting of pure components. Crystal structure has been determined for Sm₂₅Ni₄₉P₃₃ using X‐ray powder diffraction data and the Rietvelt method: P6m2, a = 22.096(4), c = 3.8734(9) Å, R = 0.096. Crystal structure of Sm₂₅Ni₄₉P₃₃ is of a new type and belongs to large family of ternary compounds with trigonal‐prismatic coordination of the smallest size atoms and metal to nonmetal ratio equal or close to 2 : 1. It is a member of homologous subseries of the compounds with unit cell contents described by general chemical formula R M X . Lattice parameters of the isotypic compounds Ln₂₅Ni₄₉P₃₃ have been refined using X‐ray powder diffraction data.     

Volumetric and Viscometric Properties of Aqueous Solutions of N-Methylformamide, 1,2-Diaminopropane and 2-Methylpropane-2-ol

Density and viscosity of aqueous solutions of N-methylformamide (NMF), 1,2-diaminopropane (DAP) and 2-methylpropane-2-ol (MPL) have been measured precisely over the entire composition range (i.e., 1 ≥ x ₂ ≥ 0) at five equidistant temperatures ranging from 298.15 to 318.15 K. Excess molar volume (V^E _m ) and excess viscosity (η ^E ) have been calculated from measured density and viscosity data, respectively. Excess molar volume and excess viscosity have been fitted by the least squares method to the four parameters Redlich-Kister equation. The results have been interpreted on the basis of (i) interstitial incorporation, (ii) breakdown of the structure of pure liquids, (iii) hydrophobic hydration, (iv) hydrophobic interaction and (v) association between dissimilar liquids.     

Synthesis,spectroscopic, thermal and biological aspect of mixed ligand copper(II) complexes

Derivative of 8-hydroxyquinoline i.e. Clioquinol is well known for its antibiotic properties, drug design and coordinating ability towards metal ion such as Copper(II). The structure of mixed ligand complexes has been investigated using spectral, elemental and thermal analysis. In vitro anti microbial activity against four bacterial species were performed i.e. Escherichia coli, Pseudomonas aeruginosa, Serratia marcescens, Bacillus substilis and found that synthesized complexes (15–37 mm) were found to be significant potent compared to standard drugs (clioquinol i.e. 10–26 mm), parental ligands and metal salts employed for complexation. The kinetic parameters such as order of reaction (n = 0.96–1.49), and the energy of activation (E _a = 3.065–142.9 kJ mol⁻¹), have been calculated using Freeman–Carroll method. The range found for the pre-exponential factor (A), the activation entropy (S* = −91.03 to−102.6 JK⁻¹ mol⁻¹), the activation enthalpy (H* = 0.380–135.15 kJ mol⁻¹), and the free energy (G* = 33.52–222.4 kJ mol⁻¹) of activation reveals that the complexes are more stable. Order of stability of complexes were found to be [Cu(A⁴)(CQ)OH] · 4H₂O > [Cu(A³)(CQ)OH] · 5H₂O > [Cu(A¹)(CQ)OH] · H₂O > [Cu(A²)(CQ)OH] · 3H₂O     

One-pot facile synthesis,crystal structure and antifungal activity of 1,2,3-triazoles bridged with amine-amide functionalities

A library of twenty five 1,2,3-triazoles bridged with amine-amide functionalities have been synthesized from reaction of N-substituted(prop-2-yn-1-yl)amines (2a–2e), 2-bromo-N-arylacetamides (4a–4e) and sodium azide through copper(I)-catalyzed alkyne-azide cycloaddition. The synthesized compounds were characterized by using FTIR, ¹H NMR, ¹³C NMR, and HRMS techniques. The structures of synthesized 5a (CCDC 1569245) and 5h (CCDC 1569249) were also confirmed by X-ray crystallography. Antifungal evaluation of newly synthesized triazoles was carried out against – Candida albicans and Aspergillus niger. Biological screening of synthesized 1,2,3-triazoles revealed moderate to good antifungal activity against tested strains.     

Palladium(II)‐N‐heterocyclic carbene complexes: synthesis,characterization and catalytic application

N‐Heterocyclic carbenes (NHCs) are of great importance and are powerful ligands for transition metals. A new series of sterically hindered benzimidazole‐based NHC ligands (LHX) ( 2a , 2b , 2c , 2d , 2e , 2f ), silver–NHC complexes ( 3a , 3b , 3c , 3d , 3e , 3f ) and palladium–NHC complexes ( 4a , 4b , 4c , 4d , 4e , 4f ) have been synthesized and characterized using appropriate spectroscopic techniques. Studies have focused on the development of a more efficient catalytic system for the Suzuki coupling reaction of aryl chlorides. Catalytic performance of Pd–NHC complexes and in situ prepared Pd(OAc)₂/LHX catalysts has been investigated for the Suzuki cross‐coupling reaction under mild reaction conditions in aqueous N,N‐dimethylformamide (DMF). These complexes smoothly catalyzed the Suzuki–Miyaura reactions of electron‐rich and electron‐poor aryl chlorides. Copyright © 2014 John Wiley & Sons, Ltd.