Preparation,Antibacterial Activity,and Catalytic Application of Magnetic Graphene Oxide-Fucoidan in the Synthesis of 1,4-Dihydropyridines and Polyhydroquinolines

Polymer-coated magnetic nanoparticles are emerging as a useful tool for a variety of applications, including catalysis. In the present study, fucoidan-coated magnetic graphene oxide was synthesized using a natural sulfated polysaccharide. The prepared BaFe₁₂O₁₉@GO@Fu (Fu=fucoidan, GO=graphene oxide) was characterized using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) analysis, vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), Raman spectroscopy, and X-ray diffraction (XRD). The catalytic proficiency of BaFe₁₂O₁₉@GO@Fu was investigated in the synthesis of 1,4-dihydropyridine and polyhydroquinoline derivatives. Excellent turnover numbers (TON) and turnover frequencies (TOF) (6330 and 25320 h⁻¹) testify to the high efficiency of the catalyst. Moreover, the antimicrobial activity of BaFe₁₂O₁₉@GO@Fu was evaluated against Escherichia coli (E. coli), and Staphylococcus aureus (S. aureus) through the Agar well diffusion method, indicating that BaFe₁₂O₁₉@GO@Fu has antibacterial activity against S. aureus.     

针状纳米SrFe12O19的溶胶-凝胶法制备及磁性研究

采用柠檬酸-EDTA的联合络合溶胶-凝胶法制得了针状纳米锶铁氧体磁性微粒。利用XRD对样品的物相进行分析,利用TEM对样品形貌和粒径进行表征,并利用振荡样品磁强计(VSM)对样品进行了磁性能研究。结果表明,相对于柠檬酸法制备的纯锶铁氧体微粒,EDTA加入后制备的SrFe₁₂O₁₉微粒仍保持六方磁铅石型结构,但是粒径减小,形貌向一维发展,且内禀矫顽力H_c显著提高。并直接对凝胶加热,使其发生自蔓延燃烧,省去了凝胶的干燥过程,制备周期缩短1/4以上,同时自蔓延燃烧使SrFe₁₂O₁₉的内禀矫顽力提高10%左右,通过洗涤前驱体使得SrFe₁₂O₁₉纯度得到提高,进而使比剩余磁化强度和比饱和磁化强度提高20%左右,最终制得了粒径为30 nm,长径比为5∶1,内禀矫顽力、比饱和磁化强度与比剩余磁化强度分别为6 446.9 Oe、68.9 emu·g^-1和40.2 emu·g^-1的针状纳米SrFe₁₂O₁₉。     

Synthesis and Characterization of Copper Ferrite Nanocrystals via Coprecipitation

Nanocrystalline CuFe₂O₄ powder was prepared by a coprecipitation method from iron chloride and copper chloride in the presence of octanoic acid (C₈H₁₆O₂) as surfactant. The as-prepared samples were characterized by XRD, TEM, SEM, FT-IR and VSM. SEM and TEM indicated that the particles were quasi spherical with the particle sizes in the range of 23±7?nm. The magnetic properties of the sample were measured by using a vibration sample magnetometer (VSM), which showed that the sample exhibited a typical ferromagnetic behavior at room temperature, while present finite coercivity of 245.5?Oe at 300?K.     

叶酸对磁性Fe_3O_4纳米粒子的表面修饰

以FeCl3·6H2O作为单一铁源,1,6-己二胺作为胺化试剂,利用无模板的溶剂热方法制备了胺基功能化的磁性Fe3O4纳米粒子,并利用其键合叶酸分子,制备出表面修饰了叶酸的磁性Fe3O4复合纳米粒子。利用傅里叶变换红外光谱仪、X-射线衍射仪、透射电镜、差热-热重分析仪和振动样品磁强计对所得纳米粒子的形貌、粒径、化学组成和磁性能进行了表征。结果表明,叶酸分子通过化学键牢固键合在磁性纳米Fe3O4粒子表面,叶酸修饰的复合纳米粒子仍然具有良好的磁性能。     

The use of SrFe12O19 magnetic nanoparticles as an efficient catalyst in the modified Niementowski reaction

Nanomagnetic SrFe₁₂O₁₉ was synthesized through a simple sol–gel auto‐combustion and then characterized by FT‐IR, XRD, EDXA, VSM, BET and SEM image. Moreover, it was used as catalyst for the first time in the modified Niementowski reaction to investigate its catalytic activity. According to the high yield of quinazolinone products obtained within short reaction times, it was found that SrFe₁₂O₁₉ can be used as an effective and green nanocatalyst in organic reactions. The nanomagnetic catalyst can be easily separated from the reaction mixture using an external magnet.     

Synthesis and characterization of micron‐sized monodisperse superparamagnetic polymer particles with amino groups

Micron‐sized monodisperse superparamagnetic polyglycidyl methacrylate (PGMA) particles with functional amino groups were prepared by a process involving: (1) preparation of parent monodisperse PGMA particles by the dispersion polymerization method, (2) chemical modification of the PGMA particles with ethylenediamine (EDA) to yield amino groups, and (3) impregnation of iron ions (Fe²⁺ and Fe³⁺) inside the particles and subsequently precipitating them with ammonium hydroxide to form magnetite (Fe₃O₄) nanoparticles within the polymer particles. The resultant magnetic PGMA particles with amino groups were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X‐ray diffractometry (XRD), and vibrating sample magnetometry (VSM). SEM showed that the magnetic particles had an average size of 2.6 μm and were highly monodisperse. TEM demonstrated that the magnetite nanoparticles distributed evenly within the polymer particles. The existence of amino groups in the magnetic polymer particles was confirmed by FTIR. XRD indicated that the magnetic nanoparticles within the polymer were pure Fe₃O₄ with a spinel structure. VSM results showed that the magnetic polymer particles were superparamagnetic, and saturation magnetization was found to be 16.3 emu/g. The Fe₃O₄ content of the magnetic particles was 24.3% based on total weight. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3433–3439, 2005     

Efficient photocatalytic degradation of rhodamine-B by Fe doped CuS diluted magnetic semiconductor nanoparticles under the simulated sunlight irradiation

The present work is planned for a simple, inexpensive and efficient approach for the synthesis of Cu_1-xFe_xS (x = 0.00, 0.01, 0.03, 0.05 and 0.07) nanoparticles via simplistic chemical co-precipitation route by using ethylene diamine tetra acetic acid (EDTA) as a capping molecules. As synthesized nanoparticles were used as competent catalysts for degradation of rhodamine-B organic dye pollutant. The properties of prepared samples were analyzed with energy dispersive analysis of X-rays (EDAX), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible optical absorption spectroscopy, Fourier transform infrared (FTIR) spectra, Raman spectra and vibrating sample magnetometer (VSM). EDAX spectra corroborated the existence of Fe in prepared nanoparticles within close proximity to stoichiometric ratio. XRD, FTIR and Raman patterns affirmed that configuration of single phase hexagonal crystal structure as that of (P6₃/mmc) CuS, without impurity crystals. The average particle size estimated by TEM scrutiny is in the assortment of 5–10 nm. UV-visible optical absorption measurements showed that band gap narrowing with increasing the Fe doping concentration. VSM measurements revealed that 3% Fe doped CuS nanoparticles exhibited strong ferromagnetism at room temperature and changeover of magnetic signs from ferromagnetic to the paramagnetic nature with increasing the Fe doping concentration in CuS host lattice. Among all Fe doped CuS nanoparticles, 3% Fe inclusion CuS sample shows better photocatalytic performance in decomposition of RhB compared with the pristine CuS. Thus as synthesized Cu_0·97Fe_0·03S nanocatalysts are tremendously realistic compounds for photocatalytic fictionalization in the direction of organic dye degradation under visible light.     

Characterization of NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles synthesized by various methods

Microwave-induced combustion with glycine, CTAB-assisted hydrothermal process with NaOH and NH3, EDTA assisted-hydrothermal methods have been applied to prepare NiFe₂O₄ nanoparticles for the first time. Structural and magnetic properties of the products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmison electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and electron spin resonance spectrometry (EPR). TEM measurements showed that morphology of the product depends on the synthesis method employed. The average cystallite size of NiFe₂O₄ nanoparticles was in the range of 14–59 nm as measured by XRD. The uncoated sample (Method A) had an EPR linewidth of 1973 Oe, the coated samples reached lower values. The magnetic dipolar interactions existing among the Ni ferrite nanoparticles are reduced by the coatings, which could cause the decrease in the linewidth of the EPR signals. Additionally, the linewidth increases with an increase in the size and the size distribution of nanoparticles.     

A simple route to synthesize nanocrystalline nickel ferrite (NiFe2O4) in the presence of octanoic acid as a surfactant

Nanocrystalline nickel ferrite (NiFe₂O₄) powder was prepared by a co-precipitation method from Ni and Fe chlorides. The as-prepared samples were characterized by powder X-ray diffractometry (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry (VSM). SEM and TEM indicated that the particles were spherical with particle sizes in the range 25 ± 5 nm. The magnetic properties of the sample were measured by using a vibrating sample magnetometer, which showed that the sample exhibited typical ferromagnetic behavior at room temperature, while a finite coercivity of 245.5 Oe was present at 300 K. The saturation magnetization of the sample (23.13 emu/g) was significantly lower than that for the reported multidomain bulk particles (55 emu/g), reflecting the ultrafine nature of the sample.     

超声化学法制备BaF_2纳米粒子及纳米方块

<正>0引言BaF2的用途非常广泛,可用于光学玻璃、陶瓷色料、玻璃光导纤维、激光发生器、助熔剂及防腐剂等。BaF2是最快的闪烁体,在核物理和核技术中用来检测γ射线和带电粒子[1]。将掺杂稀土金属的纳米BaF2粒子嵌入有机或玻璃基体以发挥其发光性能的研究越来越引起重视[2]。碱土氟化物和许多半导体的晶格匹配性良好,可以用不同碱土氟化物层来连接晶格常数不同的半导体[3]。     

Oxoperoxo tungsten(VI) complex immobilized on Schiff base-modified Fe3O4 magnetic nanoparticles as a heterogeneous catalyst for oxidation of alcohols with hydrogen peroxide

Oxoperoxo tungsten(VI) complex immobilized on Schiff base-modified Fe₃O₄ super paramagnetic nanoparticles were synthesized and appropriately characterized using FT-IR, XRD, SEM, TEM, EDX, BET, and VSM analysis. The synthesized nanoparticles efficiently catalyzed oxidation of benzylic alcohols with H₂O₂ as oxidant in high yields, with high to excellent selectivity. The catalyst can be recovered using an external magnetic field and recycled for subsequent oxidation reactions without any appreciable loss of efficiency. The simple preparation, high activity, excellent selectivity, and simple recoverability of the catalyst are advantageous.     

Synthesis of BiFeO3 nanoparticles with small size

Uniform bismuth ferrite BiFeO₃ nanoparticles (below 60?nm) were successfully synthesized via a simple hydrothermal route with the assistance of KOH as mineralizer and EDTA as the chelating agent. The effects of mineralizer and chelating agent on the phase formation, and morphology of these particles were investigated. Size dependent magnetic properties of as-prepared particles at room temperature were investigated.     

Synthesis of functional magnetic porous SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>/P(St-DVB-MAA) microspheres by a novel suspension polymerization

In this study, a novel and effective suspension polymerization has been employed to prepare functional magnetic porous SrFe₁₂O₁₉/P(St-DVB-MAA) microspheres in the presence of bilayer surfactants (sodium dodecyl benzene sulfonate (SDBS) and oleic acid (OA)) coated on micro-size magnetic SrFe₁₂O₁₉. This was achieved by pre-polymerizing the organic phase, which contained co-monomers, porogens and treated magnetic particles, at 65°C for 0.5 h under ultrasound conditions. Aqueous solutions containing a dispersion agent were then added to effect suspension polymerization. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and magnetic property measurement system (MPMS) were used to characterize the functional magnetic porous microspheres. The results show that the microparticles are well shaped with a uniform size distribution of about 0.5 ∼ 0.7 mm and the surfaces of the microspheres have many micro-pores with an average diameter of 0.533 μm. There are carboxyl groups (−COOH) on the surface of the microspheres to the extent of 0.65 mmol g⁻¹, as determined by conductometric titration. According to the XRD spectra, iron oxide consists mainly of SrFe₁₂O₁₉ which reveals hexahedral structure. The content of magnetic SrFe₁₂O₁₉ reaches 17.81% (by mass), and the microspheres have good heat resistance. The magnetic porous microspheres are ferromagnetic with high residual magnetization and coercivity, 21.59 emu g⁻¹ and 4.13 kOe, respectively. The saturation magnetisation is around 42.85 emu g⁻¹.      

The Synthesis of Magnetic Lysozyme‐Imprinted Polymers by Means of Distillation–Precipitation Polymerization for Selective Protein Enrichment

A protein imprinting approach for the synthesis of core–shell structure nanoparticles with a magnetic core and molecularly imprinted polymer (MIP) shell was developed using a simple distillation–precipitation polymerization method. In this work, Fe₃O₄ magnetic nanoparticles were first synthesized through a solvothermal method and then were conveniently surface‐modified with 3‐(methacryloyloxy)propyltrimethoxylsilane as anchor molecules to donate vinyl groups. Next a high‐density MIP shell was coated onto the surface of the magnetic nanoparticles by the copolymerization of functional monomer acrylamide (AAm), cross‐linking agent N,N′‐methylenebisacrylamide (MBA), the initiator azodiisobutyronitrile (AIBN), and protein in acetonitrile heated at reflux. The morphology, adsorption, and recognition properties of the magnetic molecularly imprinted nanoparticles were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and rebinding experiments. The resulting MIP showed a high adsorption capacity (104.8 mg g^?1) and specific recognition (imprinting factor=7.6) to lysozyme (Lyz). The as‐prepared Fe₃O₄@Lyz‐MIP nanoparticles with a mean diameter of 320 nm were coated with an MIP shell that was 20 nm thick, which enabled Fe₃O₄@Lyz‐MIP to easily reach adsorption equilibrium. The high magnetization saturation (40.35 emu g^?1) endows the materials with the convenience of magnetic separation under an external magnetic field and allows them to be subsequently reused. Furthermore, Fe₃O₄@Lyz‐MIP could selectively extract a target protein from real egg‐white samples under an external magnetic field.     

Synthesis of bioactive magnetic nanoparticles spiro[indoline-3,4′-[1,3]dithiine]@Ni (NO3)2 supported on Fe3O4@SiO2@CPS as reusable nanocatalyst for the synthesis of functionalized 3,4-dihydro-2H-pyran

New bioactive magnetic nanoparticles of spiro[indoline-3,4′-[1,3]dithiine]@Ni (NO₃)₂ supported on Fe₃O₄@SiO₂@CPS were synthesized in five steps. The structure of synthesized magnetic nanoparticles was identified by using Energy-Dispersive X-ray spectroscopy (EDX), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Thermal Gravimetric Analysis (TGA), Infrared spectroscopy (FT-IR), Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), Vibrating Sample Magnetometer (VSM) and Brunauer Emmett Teller (BET) surface analysis. Antimicrobial activity of the synthesized magnetic nanoparticles based on MIC (Minimum Inhibitory Concentration) and MBC (Minimum Bactericidal Concentration) and MFC (Minimum Fungicidal Concentration) values were also examined. Furthermore, the synthesized magnetic nanoparticles exhibited appropriate catalytic properties in the synthesis of the 3,4-dihydro-2H- pyran derivatives.     

Synthesis of monodispersed Fe3O4@C core/shell nanoparticles

We report a facile method to synthesize dispersed Fe₃O₄@C nanoparticles（NPs）. Fe₃O₄ NPs were firstly prepared via the high temperature diol thermal decomposition method. Fe₃O₄@C NPs were fabricated using glucose as a carbon source by hydrothermal process. The obtained products were characterized by X-ray diffraction（XRD）, transmission electron microscopy（TEM）, vibrating sample magnetometer（VSM） and Raman spectra. The results indicate that the original shapes and magnetic property of Fe₃O₄ NPs can be well preserved. The magnetic particles are well dispersed in the carbon matrix. This strategy would provide an efficient approach for existing applications in Li-ion batteries and drug delivery. Meanwhile, it offers the raw materials to assemble future functional nanometer and micrometer superstructures.     

Preparation and in vitro cytotoxicity study of poly (aspartic acid) stabilized magnetic nanoparticles

Biocompatible magnetic nanoparticles were prepared by co-precipitation method in the presence of poly (aspartic acid) (PAsp) as stabilizer, which was one of the most extensively studied and used poly(amino acids). As a biocompatible dispersant, PAsp was successfully attached to the Fe₃O₄ nanoparticles, which was approved by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). From X-ray diffraction (XRD) and vibrating sample magnetometry (VSM) measurement results, it was found that PAsp stabilized iron oxide nanoparticles possess excellent Fe₃O₄ crystal structure and superparamagnetic property. Compared with trisodium citrate stabilized magnetic nanoparticles, PAsp stabilized magnetic nanoparticles were biocompatible and with lower cytotoxicity, which makes it more applicable in medicine, biology and biomaterial science.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

An Fe3O4 nanoparticle-supported Mn (II)-azo Schiff complex acts as a heterogeneous catalyst in alcoholysis of epoxides

In this paper, an azo-containing Schiff base complex of manganese [Mn²⁺-azo ligand@APTES-SiO₂@Fe₃O₄] immobilized on chemically modified Fe₃O₄ nanoparticles has been used as a magnetically retrievable catalyst for the alcoholysis of different epoxides to their corresponding alkoxy alcohols with methanol, ethanol and n-propanol. The newly magnetic nanoparticles (MNPs) were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and vibrating sample magnetometry (VSM).     

Preparation of magnetic separable CoFe2O4/PAC composite and the adsorption of bisphenol A from aqueous solution

CoFe₂O₄/PAC composite adsorbent has been prepared via an immersing-calcination process, using ethylene diamine tetraacetic acid (EDTA) and citric acid (CIT) ligands containing sol as the CoFe₂O₄ precursor. The microstructure characterization and magnetic property of as-prepared sample were performed by means of XRD and VSM measurements. The adsorption kinetics, isotherms and thermodynamic process toward Bisphenol A molecules (BPA, which is considered as one of the typical endocrine disrupting chemicals) occurred on as-prepared magnetic adsorbent which were investigated by the pseudo-second order kinetic/intraparticle models, the Langmuir/Freundlich adsorption isothermal models and basic chemical thermodynamics principles, respectively.