Fracture analysis for torsion problems of a composite cylinder with curvilinear cracks

The Salnt-Venant torsion problems of a composite cylinder with curvilinear cracks were investigated. By considering the bimaterial interface as a boundary of the outer bar or inner one, the problem was reduced to the solution of boundary integral equations on the crack, external boundary and interface. Using the new boundary element method, some typical torsion problems of a composite cylinder involving a straight or kinked crack were calculated. The obtained results were compared with data in the literature to show validity and applicability of the present method.     

A GROUP OF ISOPARAMETRIC ELEMENTS SUITABLE FOR ST．VENANT’S TORSION OF A BAR WITH CRACKS

ＡＧＲＯＵＰＯＦＩＳＯＰＡＲＡＭＥＴＲＩＣＥＬＥＭＥＮＴＳＳＵＩＴＡＢＬＥＦＯＲＳＴ．ＶＥＮＡＮＴ’ＳＴＯＲＳＩＯＮＯＦＡＢＡＲＷＩＴＨＣＲＡＣＫＳＦａｎＸｉｕｃｈａｎｇ（范秀昌）ＷｕＹｕｅｍｉｎｇ（吴月明）（ＴｉａｎｊｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅ...     

An effective boundary element method for analysis of crack problems in a plane elastic plate

A simple and effective boundary element method for stress intensity factor calculation for crack problems in a plane elastic plate is presented. The boundary element method consists of the constant displacement discontinuity element presented by Crouch and Starfield and the crack-tip displacement discontinuity elements proposed by YAN Xiangqiao. In the boundary element implementation the left or the right crack-tip displacement discontinuity element was placed locally at the corresponding left or right each crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. Test examples (i. e. , a center crack in an infinite plate under tension, a circular hole and a crack in an infinite plate under tension) are included to illustrate that the numerical approach is very simple and accurate for stress intensity factor calculation of plane elasticity crack problems. In addition, specifically, the stress intensity factors of branching cracks emanating from a square hole in a rectangular plate under biaxial loads were analysed. These numerical results indicate the present numerical approach is very effective for calculating stress intensity factors of complex cracks in a 2-D finite body, and are used to reveal the effect of the biaxial loads and the cracked body geometry on stress intensity factors.     

动态断裂力学的无限相似边界元法

对弹性动力学的相似边界元法进行了进一步研究,推导了相应的计算公式,并在此基础上提出了动态断裂力学的无限相似边界元法.与传统的边界元法相比,相似边界元法由于只需在少数单元上进行数值积分,大大减少了计算量.对动态断裂力学问题,无限相似边界元法由于在裂纹尖端的边界上设置了逼近于裂纹尖端的无限个相似边界单元,可直接得到裂纹尖端具有奇异性的应力,而不需要设置奇异单元,从而突破了奇异单元对应力奇异性阶次的局限.另外,还讨论了无限相似边界元法得到的无限阶的线性代数方程组的求解方法.     

双轴载荷作用下源于椭圆孔的分支裂纹的一种边界元分析

利用一种边界元方法来研究双轴载荷作用下无限大板中源于椭圆孔的分支裂纹．该边界元方法由Crouch与Starfied建立的常位移不连续单元和笔者提出的裂尖位移不连续单元构成．在该边界元方法的实施过程中,左、右裂尖位移不连续单元分别置于裂纹的左、右裂尖处,而常位移不连续单元则分布于除了裂尖位移不连续单元占据的位置之外的整个裂纹面及其它边界,文中算例说明本数值方法对计算平面弹性裂纹的应力强度因子是非常有效的。该文对双轴载荷作用下无限大板中源于椭圆孔的分支裂纹的数值结果进一步证实本数值方法对计算复杂裂纹的应力强度因子的有效性,同时该数值结果可以揭示双轴载荷及裂纹体几何对应力强度因子的影响。     

内部压力作用下矩形板中源于椭圆孔的分支裂纹应力强度因子的一种数值分析

应用一种边界元方法来研究内部压力作用下矩形板中源于椭圆孔的分支裂纹。该边界元方法由Crouch与Starfied建立的常位移不连续单元和笔者最近提出的裂尖位移不连续单元构成。在该边界元方法的实施过程中,左、右裂尖位移不连续单元分别置于裂纹的左、右裂尖处,而常位移不连续单元则分布于除了裂尖位移不连续单元占据的位置之外的整个裂纹面及其它边界。本数值结果进一步证实这种数值方法对计算有限大板中复杂裂纹的应力强度因子的有效性,同时该数值结果可以揭示裂纹体几何对应力强度因子的影响。     

用样条边界元与奇异积分方程法联合求解多裂纹柱体的扭转

通过间解的分离，本文将径向多裂纹柱体的导曲函两个调和函数表示，使问题归为解一组混混合型积分方程。针对方程的特点，本文联合使用三次样条边界法与奇异积分方程的数值方法对所得方程建立了数值法，并对裂纹相交情形作了特殊处理。最后对工程中感兴趣的一些典型的多裂纹柱体的扭转作了例题计算，结果表明，本文方法具有收敛快，精度高的特点。     

FATIGUE GROWTH MODELING OF MIXED-MODE CRACK IN PLANE ELASTIC MEDIA

This paper presents an extension of a displacement discontinuity method with cracktip elements （a boundary element method） proposed by the author for fatigue crack growth analysis in plane elastic media under mixed-mode conditions. The boundary element method consists of the non-singular displacement discontinuity elements presented by Crouch and Starfield and the crack-tip displacement discontinuity elements due to the author. In the boundary element implementation the left or right crack-tip element is placed locally at the corresponding left or right crack tip on top of the non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the maximum circumferential stress criterion. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the numerical approach. Crack growth is modeled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characteristics of some related elements are adjusted according to the manner in which the boundary element method is implemented. As an example, the fatigue growth process of cracks emanating from a circular hole in a plane elastic plate is simulated using the numerical simulation approach.     

Boundary element method to solve torsion problem of cracked cylinder

Separating the discontinuous solution by use of the single crack solution, together with the regular solution of harmonic function, the torsion problem of a cracked cylinder is reduced to solving a set of mixed-type integral equations and its numerical technique is then proposed by combining the numerical method of singular integral equation with the boundary element method. Several numerical examples are calculated which will be useful to engineering practice. The method proposed is characterized by its fine accuracy and convenience for using, which can be extended to the cases of multiple crack.The project supported by National Natural Science Foundation of China.     

Stress intensity factors of the eccentric and edge cracked cylinders

Using the single crack solution and the regular solution of harmonic function,thetorsion problem of a cracked cylinder is reduced to solving a set of mixed-type integralequations which can be solved by combining the numerical method of singular integralequation with the boundary element method.Several numerical examples arecalculated and the stress intensity factors are obtained.     

Analysis of three-dimensional edge cracks under tensile loading

Three-dimensional edge cracks are analyzed using the Self-Similar Crack Expansion (SSCE) method with a boundary integral equation technique. The boundary integral equations for surface cracks in a half space are presented based on a half space Green's function (Mindlin, 1936). By using the SSCE method, the stress intensity factors are determined by the crack-opening displacement over the crack surface. In discrete boundary integral equations, the regular and singular integrals on the crack surface elements are evaluated by an analytical method, and the closed form expressions of the integrals are given for subsurface cracks and edge crakcs. This globally numerical and locally analytical method improves the solution accuracy and computational effort. Numerical results for edge cracks under tensile loading with various geometries, such as rectangular cracks, elliptical cracks, and semi-circular cracks, are presented using the SSCE method. Results for stress intensity factors of those surface breaking cracks are in good agreement with other numerical and analytical solutions.     

用边界元法求一般截面的弯曲中心

使用Saint-Venant弯曲理论,将一般截面柱体的横向弯曲问题,归结为解两个同类型的边界积分方程,并用此求得了柱体的弯曲函数和附加扭转函数,在此基础上,可用边界元法确定一般截面的弯曲中心。最后为了说明方法的应用,给出了一个数值算例。     

A special crack tip displacement discontinuity element

Based on the analytical solution to the problem of a constant discontinuity in displacement over a finite line segment in the x, y plane of an infinite elastic solid and the note of the crack tip element by Crouch, in the present paper, the special crack tip displacement discontinuity element is developed. Further the analytical formulas for the stress intensity factors of crack problems in general plane elasticity are given. In the boundary element implementation the special crack tip displacement discontinuity element is placed locally at each crack tip on top of the non-singular constant displacement discontinuity elements that cover the entire crack surface. Numerical results show that the displacement discontinuity modeling technique of a crack presented in this paper is very effective.     

Two dimensional stress intensity factor computations by multi-domain boundary element method for crack closure with friction

A multi-domain boundary element method is used to compute the stress intensity factor of plane stress/plane strain crack problems with friction. The analysis is performed by using traction-singular quarter-point boundary elements on each side of the crack tips. The increment iteration is given. The technique is applied to some specific examples in order to show that the results will be with good accuracy.The Project 13 supported by National Natural Science Foundation of China.     

A numerical analysis of cracks emanating from an elliptical hole in a 2-D elasticity plate

This paper is concerned with the stress intensity factors (SIFs) of cracks emanating from an elliptical hole in an infinite or a finite plate under biaxial loads by using a boundary element method, which consists of the non-singular displacement discontinuity element presented by Crouch and Starfield and the crack-tip displacement discontinuity elements due to the author. In the boundary element implementation the left or the right crack-tip element is placed locally at the corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. A few numerical examples are included to show that the present approach is very efficient and accurate for the calculating the SIFs of crack problems in an infinite or a finite plate. The present numerical results of cracks emanating from an elliptical hole under biaxial loads can reveal the effect of the elliptical aspect ratio and the transverse load on the SIFs.     

FINITE ELEMENT MODELLING OF COMPLEX 3D STATIC AND DYNAMIC CRACK PROPAGATION BY EMBEDDING COHESIVE ELEMENTS IN ABAQUS

<正>This study proposes an algorithm of embedding cohesive elements in Abaqus and develops the computer code to model 3D complex crack propagation in quasi-brittle materials in a relatively easy and efficient manner.The cohesive elements with softening traction-separation relations and damage initiation and evolution laws are embedded between solid elements in regions of interest in the initial mesh to model potential cracks.The initial mesh can consist of tetrahedrons,wedges,bricks or a mixture of these elements.Neither remeshing nor objective crack propagation criteria are needed.Four examples of concrete specimens,including a wedge-splitting test,a notched beam under torsion,a pull-out test of an anchored cylinder and a notched beam under impact,were modelled and analysed.The simulated crack propagation processes and load-displacement curves agreed well with test results or other numerical simulations for all the examples using initial meshes with reasonable densities.Making use of Abaqus's rich pre/post-processing functionalities and powerful standard/explicit solvers,the developed method offers a practical tool for engineering analysts to model complex 3D fracture problems.     

一种基于直接计算高阶奇异积分的断裂力学双边界积分方程分析法

相对于有限元法,边界单元法在求解断裂问题上有着独特的优势,现有的边界单元法中主要有子区域法和双边界积分方程法.采用一种改进的双边界积分方程法求解二维、三维断裂问题的应力强度因子,对非裂纹边界采用传统的位移边界积分方程,只需对裂纹面中的一面采用面力边界积分方程,并以裂纹间断位移为未知量直接用于计算应力强度因子.采用一种高阶奇异积分的直接法计算面力边界积分方程中的超强奇异积分;对于裂纹尖端单元,提供了三种不同形式的间断位移插值函数,采用两点公式计算应力强度因子.给出了多个具体的算例,与现存的精确解或参考解对比,可得到高精度的计算结果.      

Numerical analysis of quasi-static crack branching in brittle solids by a modified displacement discontinuity method

Mechanism of quasi-static crack branching in brittle solids has been analyzed by a modified displacement discontinuity method. It has been assumed that the pre-existing cracks in brittle solids may propagate at the crack tips due to the initiation and propagation of the kink (or wing) cracks. The originated wing cracks will act as new cracks and can be further propagated from their tips according to the linear elastic fracture mechanics (LEFM) theory. The kink displacement discontinuity formulations (considering the linear and quadratic interpolation functions) are specially developed to calculate the displacement discontinuities for the left and right sides of a kink point so that the first and second mode kink stress intensity factors can be estimated. The crack tips are also treated by boundary displacement collocation technique considering the singularity variation of the displacements and stresses near the crack tip. The propagating direction of the secondary cracks can be predicted by using the maximum tangential stress criterion. An iterative algorithm is used to predict the crack propagating path assuming an incremental increase of the crack length in the predicted direction (straight and curved cracks have been treated). The same approach has been used for estimating the crack propagating direction and path of the original and wing cracks considering the special crack tip elements. Some example problems are numerically solved assuming quasi-static conditions. These results are compared with the corresponding experimental and numerical results given in the literature. This comparison validates the accuracy and applicability of the proposed method.     

A numerical analysis of perpendicular cracks under general in-plane loading with a hybrid displacement discontinuity method

In this paper, a numerical analysis of perpendicular cracks under general in-plane loading is performed by using a hybrid displacement discontinuity method which consists of the non-singular displacement discontinuity element presented by Crouch and Starfied and the crack tip displacement discontinuity elements by the author. In the boundary element implementation the left or the right crack tip displacement discontinuity element is placed locally at corresponding left or right crack tip on top of the ordinary non-singular displacement discontinuity elements that cover the entire crack surface and the other boundary. The present numerical results show that the numerical approach is simple, yet very accurate for calculating numerically stress intensity factors for perpendicular cracks under general in-plane loading.     

裂纹分析中的单节点二次边界元

提出一种新的边界单元；单节点二次元，利用这种单元，位移及其沿边界的切向导数在正规单元端点的连续条件自然得到满足，单节点二次元能很好地模拟角点处面力多值条件，特殊裂纹尖端单节点二次单元包括近裂纹尖端位移近似级数展开第二项。由于每个单元只有一个节点，计算程序大大简化。对直裂纹，圆弧裂纹和边裂纹进行了计算。数值计算结果表明，单节点二次边界单元计算精度高，收敛性好。