Trimethylsilyl ethers of amphiphilic carbosilane dendrimers of the third–fifths generations. Specific features of hydrolysis at the water-air interface

Carbosilane dendrimers from the third to fifth generation with hydroxy groups in the surface layer of the dendrimer were synthesized, as well as their analogs with latent hydroxy groups. The dendrimers differ by the density of the carbosilane core and hydrophilic shell. The amphiphilic nature of the synthesized compounds was manifested already for more hydrophobic trimethylsilyl derivatives of dendrimers. This allowed one to observe the hydrolysis of these objects during compression of their monolayers at the water surface in the Langmuir bath. The parameters of the molecular structure of the dendrimers exert a determining effect on the rate and completeness of the hydrolysis. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2125–2133, November, 2007.     

Synthesis of poly(alkyl aryl ether) dendrimers

Poly(alkyl aryl ether) dendrimers of up to four generations composed of a phloroglucinol core, branching components, and pentamethylene spacers are synthesized by a divergent growth methodology. A repetitive synthetic sequence of phenolic O-alkylation and O-benzyl deprotection reactions are adopted for the synthesis of these dendrimers. The peripheries of the dendrimers contain 6, 12, 24, and 48 phenolic hydroxyl groups, either in the protected or unprotected form, for the first, second, third, and fourth generations, respectively. Because of the presence of hydrophilic exterior and relatively hydrophobic interior regions, alkaline aqueous solutions of these dendrimers are able to solubilize an otherwise insoluble pyrene molecule and these supramolecular complexes precipitate upon neutralization of the aqueous solutions.     

Dendritic polyols based on carbosilanes - lipophilic dendrimers with hydrophilic skin

Carbosilane dendrimers with up to 108 end groups were prepared by a divergent synthetic route via repeated alternating Grignard-reaction with allylmagnesium bromide and hydrosilylation. Quantitative hydroboration of the dendrimers was achieved with 9-BBN/H₂O₂,OH⁻. Employing this synthetic route, rather monodisperse dendritic polyols with lipophilic carbosilane core and hydrophilic shell were prepared. All dendrimers were characterized with MALDI-TOF, showing low polydispersities. The novel dendritic polyols constitute interesting molecular scaffolds for the preparation of unusual supermolecules. As an example, reaction with cholesteryl chloro-formiate was used to prepare a series of dendrimers with 12, 36 and 108 mesogenic cholesteryl end groups.     

Synthesis of steroidal dendrimers modified by ‘click’ chemistry with PAMAM dendrons as unimolecular micelles

Novel Fréchet–PAMAM hybrid dendrimers linked by triazole units as unimolecular micelles with a hydrophobic core surrounded by a hydrophilic shell were prepared. The dendritic cores with 3 and 6 alkyne terminal groups were synthesized from 1,3,5-tribromomethyl-benzene (tBrMeB), in one case by direct coupling with 17α-ethynylestradiol (EE); in the second one the tBrMeB was reacted with bis(hydroxymethyl) phenol followed by chlorination of the hydroxyl groups and subsequent coupling to EE. With this strategy, the core can be grown by further substitutions of bis(hydroxymethyl) phenol over the halogenated terminals as Fréchet dendrimer. The hydrophilic shells used were PAMAM type dendrons of 0.5 and 1.5 generations with azide as focal point and tert-butyl ester as end groups. The unimolecular micelles were obtained by cycloaddition between an azide in the selected dendron and the alkyne terminal in the hydrophobic core to obtain a 1,4-disubstituted 1,2,3-triazole. Once the coupling was achieved, the tert-butyl ester groups were hydrolyzed in trifluoroacetic acid and the corresponding dendrimers with carboxylic acid as end groups were completely soluble in phosphate buffer solutions of pH 7.0, 7.4, and 8.0. All hybrid dendrimers were characterized by High Resolution Mass Spectrometry, ¹H and ¹³C NMR, and FTIR.     

Photoresponsive nanocarriers based on PAMAM dendrimers with a o‐nitrobenzyl shell

Gn (n = 3, 4, and 5) poly(amidoamine) (PAMAM) dendrimers were synthesized and peripherally modified with photocleavable o‐nitrobenzyl (NB) groups by reacting o‐nitrobenzaldehyde with the terminal amine groups of PAMAM dendrimers, followed by reducing the imine to amine groups with NaBH₄. The NB‐modified dendrimers, Gn‐NB (n = 3, 4, and 5), were characterized by nuclear magnetic resonance and fourier transform infrared spectroscopy. The results showed that the NB groups were successfully attached on the periphery of the dendrimers with near 100% grafting efficiency. Such a photosensitive NB shell could be cut off on irradiation with 365 nm ultraviolet (UV) light. The encapsulation and release of guest molecules, that is, salicylic acid (SA) and adriamycin (ADR), by Gn‐NB were explored. The encapsulation capability of these dendrimers was found to increase as the guest molecular size was decreased and have dependence on the generation of dendrimers as well. For both of SA and ADR, the average encapsulation numbers per dendrimer decreased in the order of G4‐NB > G5‐NB > G3‐NB, indicating that the fourth generation dendrimer was a better container for the guest molecules. The rate of SA release was found to be greater with UV irradiation than that without, suggesting that the NB‐shelled PAMMAM dendrimers could function as a molecular container/box with photoresponsive characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 551–557, 2010     

Effects of end groups on phase transition and segmental mobility of poly(N‐isopropylacrylamide) chains in D2O

Phase transition and mobility of poly(N‐isopropylacrylamide) (PNIPA) chains with three different types of end groups (hydroxyl, carbon–carbon double bond, and camphoric sulfonic groups) have been studied by measurements of the normal ¹H NMR spectrum, spin–spin relaxation time, and 2D NOESY spectrum. It is found that at room temperature not only the end group parts but also the part of the PNIPA chain with hydroxyl end group have higher mobility than corresponding parts of PNIPA with double bond and camphoric sulfonic end groups. The lower critical solution temperatures (LCST) of PNIPAs modified with hydrophilic hydroxyl and hydrophobic double bond end groups are inversely dependent and directly dependent on the molecular weight of polymer respectively, whereas the LCST of PNIPA with the camphoric sulfonic end group bearing both hydrophobic and hydrophilic structures is independent of the molecular weight. The double bond end groups collapse simultaneously with inner segments of the PNIPA chain, whereas the hydroxyl and camphoric sulfonic end groups still exhibit higher mobility and do not shrink tightly after heating‐induced collapsing of inner segments. It is suggested that the hydroxyl and camphoric sulfonic end groups locate on the surface of globules, but the double bond end groups are probably buried inside the globules. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Self-organization of amphiphilic liquid-crystalline dendrimers in bulk and at the interface

A comparative analysis of the structure and phase behavior of synthesized carbosilane amphiphilic LC dendrimers of the third generation containing mesogenic phenyl and oligo(ethylene glycol) fragments is performed. When phenol groups are replaced with oligo(ethylene glycol) moieties, the temperature interval of the existence of the LC phase in the mesogen-containing dendrimers decreases. The chemical nature of hydrophilic terminal groups is found to control the organization of dendrimers in the smectic mesophase. Structural models for their packing are proposed. Amphiphilic dendrimers are shown to form stable Langmuir films at the water/air interface. Surface-pressure-surface area-isotherms are constructed. The effect of the chemical nature of hydrophilic groups on the formation of a monolayer at the interface and on the packing density of dendrimer molecules in the monolayer is discussed.     

Synthesis and properties of carborane-functionalized aliphatic polyester dendrimers

The incorporation of multiple p-carborane cages within an aliphatic polyester dendrimer was accomplished through the preparation of a bifunctional carborane synthon. A p-carborane derivative having an acid and a protected alcohol functionality was found to efficiently couple to peripheral hydroxyl groups of low-generation dendrimers under standard esterification conditions. Deprotection of carborane hydroxyl groups allowed for further dendronization through a divergent approach using the highly reactive anhydride of benzylidene-protected 2,2-bis(hydroxymethyl)propanoic acid. This approach was used to prepare fourth- and fifth-generation dendrimers that contain 4, 8, and 16 carborane cages within their interior. Upon peripheral deprotection to liberate a polyhydroxylated dendrimer exterior, these structures exhibited aqueous solubility as long as a minimum of eight hydroxyl groups per carborane were present. Several of the water-soluble structures were found to exhibit a lower critical solution temperature. Additionally, irradiation of these materials with thermal neutrons resulted in emission of gamma radiation that is indicative of boron neutron capture events occurring within the carborane-containing dendrimers.     

Biodegradable/biocompatible ABC triblock copolymer bearing hydroxyl groups in the middle block

New biodegradable/biocompatible ABC block copolymers, poly(ethylene oxide)‐b‐poly(glycidol)‐b‐poly(L ,L ‐lactide) (PEO‐PGly‐PLLA), were synthesized. First, PEO‐b‐poly(1‐ethoxyethylglycidol)‐b‐PLLA was synthesized by a successive anionic ring‐opening copolymerization of ethylene oxide, 1‐ethoxyethylglycidyl ether, and L ,L ‐lactide initiated with potassium 2‐methoxyethanolate. In the second step, the 1‐ethoxyethyl blocking groups of 1‐ethoxyethylglycidyl ether were removed at weakly acidic conditions leaving other blocks intact. The resulting copolymers were composed of hydrophilic and hydrophobic segments joined by short polyglycidol blocks with one hydroxyl group in each monomeric unit. These hydroxyl groups may be used for further copolymer transformations. The PEO‐PGly‐PLLA copolymers with a molecular weight of PLLA blocks below 5000 were water‐soluble. Above the critical micellar concentration (ranging from 0.05 to1.0 g/L, depending on the composition of copolymer), copolymers formed macromolecular micelles with a hydrophobic PLLA core and hydrophilic PEO shell. The diameters of the micelles were about 25 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3750–3760, 2003     

A new type of monodisperse porous, hydrophilic microspheres with reactive chloroalkyl functionality: synthesis and derivatization properties

A seeded polymerization method based on a new functional monomer, 3-chloro-2-hydroxypropyl methacrylate (HPMA-Cl), was proposed for the synthesis of a new type of monodisperse porous, hydrophilic microspheres with reactive character. By applying the method, poly(3-chloro-2-hydroxypropyl methacrylate-co-ethylene dimethacrylate) (poly(HPMA-Cl-co-EDMA)) microspheres in the range of 4–7 μm, with specific surface areas between 2 and 146 m²/g, were obtained. The microspheres are hydrophilic in nature due to the hydroxyl groups and are easily derivatizable due to the reactive chloropropyl moiety. Ligands in the form of small molecules carrying hydrophobic alkyl or hydrophilic ion exchanger groups were covalently attached onto the microspheres via simple and one-pot reactions via their chloropropyl functionality. Using the same functionality, click chemistry and surface-initiated atom transfer radical polymerization were also applied for the generation of triazole ring and zwitterionic molecular brushes on the microspheres, respectively. Poly(HPMA-Cl-co-EDMA) microspheres seem to be a promising hydrophilic reactive material particularly for the synthesis of ion exchanger resins and chromatographic stationary phases.     

Surface properties of a series of amphiphilic dendrimers with short hydrophobic chains

A series of tree-shaped, amphiphilic dendrimers was synthesized. The products belong to the family of one-directional arborols of the form ([9]-n), where the notation signifies that each molecule has nine hydroxyl groups ([9]-) as the hydrophilic head and an alkyl chain as the hydrophobic moiety (n = 6, 8, or 10 carbon atoms). The surfactant character changes dramatically as the number of methylene groups increases. The critical micelle concentration of [9]-6 was determined, and pressure-area isotherms of the less soluble [9]-8 and [9]-10 were obtained. Large structures existed atop the spread layers. Large structures were also found in solutions of [9]-6.     

含氨基酸和多肽的树枝状化合物的合成与分子动力学模拟研究

合成了一系列以氨基酸和多肽为外周功能基团的醚-酰胺型树枝状化合物, 化合物结构经NMR, ESI-MS确证. 并对该系列化合物在水溶液中的状态进行了分子动力学模拟. 结果显示: 化合物的构象与原子数相关, 随原子数的增加有逐渐接近球形的趋势; 氨基酸α碳原子径向分布显示, 随着外周功能基团的增大, 分子可能存在部分卷曲构象.     

Dendrimers: From Design to Application—A Progress Report

A unique combination of a clearly defined particle structure and a very highly functionalized surface is offered by the topical dendrimers. Many groups work on this unusual molecular architecture to develop new applications. The most advanced progress in this respect is an MRI contrast agent based on dendrimers (see schematic representation) that facilitate the visualization of bloodstreams.     

Reorientational Dynamics of Polyethylene Glycol/PAMAM Dendrimer Blends

The reorientational dynamics of dipoles in a series of blends of Polyethylene Glycol (PEG) and poly(amidoamine) (PAMAM) dendrimers were investigated by broadband dielectric relaxation spectroscopy (DRS). Measurements were performed over a wide range of frequency and temperature. Neat PEG exhibits three relaxation processes: the segmental process in the amorphous phase and two faster processes due to the localized motions in the amorphous regions and the rotation of hydroxyl end groups. Addition of dendrimers to the PEG matrix slows down the segmental process in the amorphous phase, but has no effect on the relaxation time of local processes in PEG. However, H-bonding which forms between the PEG oxygen and the amino groups on dendrimer surface is responsible for a shift of local processes in dendrimers to lower frequency. A detail analysis of the effect of temperature, concentration of dendrimers and molecular weight of PEG on the relaxation dynamics is offered.     

Three-dimensionally ordered macroporous cross-linked polystyrene incorporating functional group via hydrophilic spacer arm

<正>A versatile and effective method for incorporating functional groups on the pore wall of three-dimensionally ordered macroporous cross-linked polystyrene(3DOM CLPS) by hydrophilic spacer arm has been investigated.The 3DOM CLPS with pore size 865 nm was prepared by sacrifice template method.The hydrophilic spacer arm(polyethylene glycol,molecular weight is 600) was grafted to the 3DOM CLPS via nucleophilic substitution reaction.The other side of active hydroxyl can be further converted into a lot of other functional groups.In this report,the chelating ligand 2-mercaptobenzothiazole(MBZ) group was introduced on the end of the PGE chain to evidence the versatile functionalization approach.The functionalized ordered macroporous materials were characterized by FT-IR,element analyzer,SEM.The results reveal that the pores were successfully bonded with 2-mercaptobenzothiazole groups via hydrophilic spacer arms and the original morphology of ordered macroporous materials were remained after functionalization.The MBZ group density is 0.052 mmol/m~2.The functionalized 3DOM CLPS are expected to application as heavy metal ions adsorbent.     

Oligoagarose-Graft-Polycaprolactone Copolymers: Synthesis and Characterization

In this paper, we combine hydrophilic oligoagarose (DP_n = 10–15), issued from enzymatic degradation of the natural biopolymer agarose, with polycaprolactone, a synthetic biodegradable and hydrophobic polyester. To synthesize these amphiphilic graft copolymers, we use partially acetylated oligoagarose as macroinitiator in combination with tin (II) octanoate for the bulk polymerization of ε-caprolactone. The grafting was confirmed by NMR and SEC which showed a monomodal distribution. After removal of the acetyl protecting groups, copolymers with 30–60% free hydroxyl groups were soluble in water and insoluble in chloroform, thus indicating that they probably adopt micelle-like structures in aqueous solution with a PCL hydrophobic core and spherical oligoagarose side chains.     

Analysis of polyamidoamine dendrimers by isoelectric focusing

Polyamidoamine dendrimers have been studied extensively for their potential applications in nanomedicine. Their uses as imaging, drug, and nucleic acid delivery agents are nearing clinical trials. As such, characterization of polyamidoamine dendrimers and their nano-devices is of immense importance for monitoring the efficiency of their synthesis, purity, and quality control of manufactured products as well as their in vivo behavior. We report here the analysis of polyamidoamine dendrimers possessing various cores and surface groups with a simple and inexpensive isoelectric focusing method. The isoelectric points of the dendrimers were readily determined from a calibration plot generated by running proteins with known pI values. The isoelectric points for various surface-modified polyamidoamine dendrimers ranged from 4 to 9. Polyamidoamine dendrimers possessing terminal hydroxyl groups gave a pI?>?7, while those with terminal carboxyl groups exhibit a pI?<?7. Generation number and cores of the dendrimers did not significantly affect their isoelectric points. Isoelectric focusing thus offers another important tool for characterizing these nanomolecules.

银离子与聚酰胺-胺型树形高分子配位作用的研究

The complexation between poly(amidoamine) (PAMAM) dendrimers and silver ion was studied in this paper. The results showed that generations and surface groups of dendrimers， reaction time， pH value， mole ratio of Ag⁺/PAMAM dendrimers， as well as reaction temperature strongly influence complexation between Ag⁺ and PAMAM dendrimers. The maximum complexing number of Ag⁺ that amino-， hydroxyl- and carboxylate- terminated PAMAM dendrimers could bind has been obtained. It has been found that the measured value of amino- and hydroxyl- ter-minated PAMAM is almost similar to the theory value， but to carboxylate- terminated PAMAM， there is a dis-crepancy between the measured value and theory value because of the electrostatic interaction between the silver ion and carboxyl group.     

Synthesis of poly(ester‐amide) dendrimers based on 2,2‐Bis(hydroxymethyl) propanoic acid and glycine

Water‐soluble, biodegradable, and biocompatible poly(ester‐amide) dendrimers with hydroxyl functional groups are synthesized from previously prepared AB₂ adduct of 2,2‐bis(hydroxymethyl) propanoic acid (bis‐MPA) and glycine as a repeating unit. Two esterification procedures using different coupling reagent/catalyst systems (DCC/DPTS or EDC/DMAP) are studied with respect to efficiency, ease of products purification, and quality of the final products. Both procedures have their own benefits and drawbacks, depending on dendrimer generation. The synthesized poly(ester‐amide) dendrimers as well as commercially available bis‐MPA dendrimers, poly(ester‐amide) hyperbranched polymer, and poly(vinyl alcohol) are used for preparation of solid dispersions of sulfonylurea antidiabetic drug glimepiride to improve its poor water‐solubility. In vitro dissolution studies show in comparison with pure glimepiride in crystalline or amorphous form, to the same extent improved glimepiride solubility for solid dispersions based on dendritic polymers, but not for poly(vinyl alcohol). The amount of glimepiride complexed with both dendrimer types increases with dendrimer generation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3292–3301     

Analysis of sorbitan ester surfactants. Part II: Capillary supercritical fluid chromatography

A rapid, simple and quantitative approach to the separation and identification of sorbitan ester surfactants has been developed using capillary supercritical fluid chromatography (SFC). The sorbitan ester surfactants were well separated into five groups: starting materials and mono-, di-, tri-, and tetraesters, with each group consisting of a number of peaks representing different isomers. High purity glycerides of fatty acids were employed to estimate the relative response factors of sorbitan esters, and reliable group-wise integration served for quantitation of the distribution of sorbitan fatty acid esters. A very important parameter, hydrophilic–lipophilic balance (HLB), which describes the hydrophilic and hydrophobic characteristics of surfactants, could be correlated with the distribution of the sorbitan esters. A combination of solid-phase extraction (SPE) and SFC was used to separate, concentrate, and analyze Span-20 from salt-water samples. In comparison with the HPLC method, capillary SFC broadens the scope of the technique to encompass high molecular weight sorbitan polyesters while maintaining high separation efficiency.