FOAMABILITY OF PEO-PPO-PEO TRIBLOCK COPOLYMERS (P85 AND F108) AND ROLE OF THE FOAM FILMS

The foamability of two commercial PEO-PPO-PEO triblock copolymers (Synperonic P85 and F108, ICI) was studied and compared to the properties of single foam films. The volume of a steady-state foam column created with a combined pneumatic-mechanical device is used as a measure of the copolymers foamability. Experiments were carried out at bulk copolymer concentrations corresponding to full surface coverage, i.e. constant area per molecule, under equilibrium conditions. The foamability of F108 solutions was higher than that of P85 although the surface activity of both copolymers was similar. The foam volume increases with increasing the bulk copolymer concentration. Higher electrolyte concentration or lower pH caused the foam volume to diminish. A pronounced parallelism between the properties of dynamic foams and single microscopic foam films was observed: when thicker single foam films were formed (from F108 solutions) the steady     

Interactions of charged porphyrins with nonionic triblock copolymer hosts in aqueous solutions

The extent and locus of solubilization of guest and self-assembling surfactant host molecules in aqueous solutions are influenced by a variety of hydrophobic and hydrophilic interactions, as well as by more specific interactions between the various species present. By using a combination of two-dimensional heteronuclear 13C[1H] NMR correlation experiments with pulsed-gradient NMR diffusion and proton cross-relaxation measurements, the locations and distributions of porphyrin guest molecules have been established unambiguously with respect to the hydrophobic and hydrophilic moieties of a triblock copolymer species in solution. The interactions of tetra(4-sulfonatophenyl)porphyrin with the poly(propylene oxide) (PPO) and the poly(ethylene oxide) (PEO) segments of amphiphilic PEO-PPO-PEO triblock copolymer species have been measured as functions of solution conditions, including temperature and pH. The porphyrin/PEO-PPO-PEO interactions are established to be selective and adjustable according to the different temperature-dependent hydrophilicities or hydrophobicities of the PEO and PPO triblock copolymer components. Furthermore, such interactions influence the self-assembly properties of the block-copolymer amphiphiles in solution by stabilizing molecular porphyrin/PEO-PPO-PEO complexes well above the critical micellization temperature of the triblock copolymer species under otherwise identical conditions.     

Characterization and demulsification of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) copolymers

Four poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) copolymers with different molecular weights and PPO/PEO composition ratios were synthesized. The characterization of the PEO-PPO-PEO triblock copolymers was studied by surface tension measurement, UV-vis spectra, and surface pressure method. These results clearly showed that the CMC of PEO-PPO-PEO was not a certain value but a concentration range, in contrast to classical surfactant, and two breaks around CMC were reflected in both surface tension isotherm curves and UV-vis absorption spectra. The range of CMC became wider with increasing PPO/PEO composition ratio. Surface pressure Pi-A curves revealed that the amphiphilic triblock copolymer PEO-PPO-PEO molecule was flexible at the air/water interface. We found that the minimum area per molecule at the air/water interface increased with the proportion of PEO chains. The copolymers with the same mass fractions of PEO had similar slopes in the isotherm of the Pi-A curve. From the demulsification experiments a conclusion had been drawn that the dehydration speed increased with decreased content of PEO, but the final dehydration rate of four demulsifiers was approximate. We determined that the coalescence of water drops resulted in the breaking of crude oil emulsions from the micrograph.     

Modified blood-contacting polymers

New blood-contacting materials have been synthesized via graft copolymerization of a mixture of a hydrophilic monomer and the macromonomers hirudin and ovomucoid onto a synthetic polymer, either polyethylene, poly(ethylene terephthalate), or polydimethylsiloxane. It has been shown that the surface modification of the polymer via grafting of the hydrophilic monomer alone reduces the degree of denaturation of adsorbed proteins and that the introduction of hirudin and ovomucoid into the hydrophilic layer leads to a decrease in the amount of platelets adhering to the polymer surface and an increase in the clotting time on the polymer surface.     

Mechanism of gold metal ion reduction, nanoparticle growth and size control in aqueous amphiphilic block copolymer solutions at ambient conditions

Spontaneous formation and efficient stabilization of gold nanoparticles with an average diameter of 7 approximately 20 nm from hydrogen tetrachloroaureate(III) hydrate (HAuCl4.3H2O) were achieved in air-saturated aqueous poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer solutions at ambient temperature in the absence of any other reducing agent. The particle formation mechanism is considered here on the basis of the block copolymer concentration dependence of absorption spectra, the time dependence (kinetics) of AuCl4- reduction, and the block copolymer concentration dependence of particle size. The effects of block copolymer characteristics such as molecular weight (MW), PEO block length, PPO block length, and critical micelle concentration (cmc) are explored by examining several PEO-PPO-PEO block copolymers. Our observations suggest that the formation of gold nanoparticles from AuCl4- comprises three main steps: (1) reduction of metal ions by block copolymer in solution, (2) absorption of block copolymer on gold clusters and reduction of metal ions on the surface of these gold clusters, and (3) growth of metal particles stabilized by block copolymers. While both PEO and PPO blocks contribute to the AuCl4- reduction (step 1), the PEO contribution appears to be dominant. In step 2, the adsorption of block copolymers on the surface of gold clusters takes place because of the amphiphilic character of the block copolymer (hydrophobicity of PPO). The much higher efficiency of particle formation attained in the PEO-PPO-PEO block copolymer systems as compared to PEO homopolymer systems can be attributed to the adsorption and growth processes (steps 2 and 3) facilitated by the block copolymers. The size of the gold nanoparticles produced is dictated by the above mechanism; the size increases with increasing reaction activity induced by the block copolymer overall molecular weight and is limited by adsorption due to the amphiphilic character of the block copolymers.     

Interaction of urea with pluronic block copolymers by 1H NMR spectroscopy

Solution 1H NMR techniques were used to characterize the interaction of urea with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers. The urea was established to interact selectively with the PEO blocks of the block copolymer, and the interaction sites were found not to change with increasing temperature. Such interactions influence the self-assembly properties of the block copolymer in solution by increasing the hydration of the block copolymers and stabilizing the gauche conformation of the PPO chain. Therefore, urea increases the critical micellization temperature (CMT) values of PEO-PPO-PEO copolymers, and the effect of urea on the CMT is more pronounced for copolymers with higher PEO contents and lower for those with increased contents of PPO segments.     

PEO-PPO-PEO水溶液体系胶束化及凝胶化行为的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative particle dynamics, DPD)模拟方法研究了三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯(PEO-PPO-PEO)的胶束化和凝胶化行为. 通过模拟得到了F127(EO₉₉PO₆₅EO₉₉)水溶液的临界胶束浓度和临界凝胶浓度. 结果发现, 在298 K、 质量分数低于40%时, F127水溶液中形成的胶束形状均为球形. 此外,进一步研究了亲水嵌段长度对胶束结构及凝胶形成浓度的影响, 结果发现, 亲水嵌段越短, 越有利于长椭球状胶束的形成, 而临界凝胶浓度随着亲水嵌段PEO长度的增加而降低.     

Grafting of poly(ethylene oxide) to the surface of polyaniline films through a chlorosulfonation method and the biocompatibility of the modified films

Poly(ethylene oxide) (PEO) could be grafted on the surface of polyaniline (PANI) films by chlorosulfonating the films with chlorosulfonic acid followed by reacting the modified films with PEO in a pyridine solution. The modified PANI films were examined by X-ray photoelectron spectroscopy and water droplet contact angles. The surface of the PEO grafted to hydrophobic PANI films became hydrophilic and the amounts of bovine serum albumin and human blood plasma platelet adsorbed onto it were decreased by more than 80%. For comparison purposes, and because the water wetting angle can be used as a measure of biocompatibility, wetting angle experiments have been also carried out for Pluronic triblock copolymer grafted to PANI and PEO or Pluronic molecules entrapped on the surfaces of PANI films. PANI was selected as substrate because one can easily change its surface properties by PEO grafting and because being conductive can be used as a sensor.     

高分辨固体NMR研究不饱和聚酯/聚乙二醇-聚丙二醇-聚乙二醇三嵌段共聚物共混体系的相容性及局域分子运动

由于嵌段共聚物是制备纳米材料的可能途径之一受到广泛重视,它可以通过自组装而形成具有诸如球状、柱状及层状等复杂的形态结构[1].嵌段共聚物作为增容剂已经被大量应用在热塑性聚合物的共混改性中,但用两亲性嵌段共聚物改性热固体聚合物,如环氧树脂及不饱和聚酯等方面的工作则     

Surface grafting of PEO-based star-shaped molecules for bioanalytical and biomedical applications

This article reviews surface grafting of star-shaped PEO. The use of star-shaped polymers is compared to linear PEO chains regarding the layer preparation and the ability of the resulting surfaces to resist protein adsorption. We then focus on the use of end-functionalized, star-shaped, PEO-based prepolymers that are able to form covalent crosslinks and functional polymer networks on the substrate. Examples are given for specific protein adsorption as well as for cell adhesion on such layers by covalent embedding of biofunctional molecules. The possibility of coating biomedically relevant polymer substrates in three-dimensional geometries is discussed and examples are shown for poly(ethylene terephthalate) monofilament constructs.     

Detection of nisin and fibrinogen adsorption on poly(ethylene oxide) coated polyurethane surfaces by time-of-flight secondary ion mass spectrometry (TOF-SIMS)

Stable, pendant polyethylene oxide (PEO) layers were formed on medical-grade Pellethane? and Tygon? polyurethane surfaces, by adsorption and gamma-irradiation of PEO-polybutadiene-PEO triblock surfactants. Coated and uncoated polyurethanes were challenged individually or sequentially with nisin (a small polypeptide with antimicrobial activity) and/or fibrinogen, and then analyzed with time-of-flight secondary ion mass spectrometry (TOF-SIMS). Data reduction by robust principal components analysis (PCA) allowed detection of outliers, and distinguished adsorbed nisin and fibrinogen. Fibrinogen-contacted surfaces, with or without nisin, were very similar on uncoated polymer surfaces, consistent with nearly complete displacement or coverage of previously-adsorbed nisin by fibrinogen. In contrast, nisin-loaded PEO layers remained essentially unchanged upon challenge with fibrinogen, suggesting that the adsorbed nisin is stabilized within the pendant PEO layer, while the peptide-loaded PEO layer retains its ability to repel large proteins. Coatings of PEO loaded with therapeutic polypeptides on medical polymers have the potential to be used to produce anti-fouling and biofunctional surfaces for implantable or blood-contacting devices.     

Interfacial behaviors of PMMA-PEO block copolymers at the air/water interface

Amphiphilic block copolymers are attracting con-siderable attention because they exhibit unique self- assembly properties in selective organic solvents[1―4]. Semicrystalline poly(ethylene oxide) (PEO), having many interesting physicochemical properties s…     

Encapsulation method for the dispersion of NiO onto ordered mesoporous silica, SBA-15, using polyethylene oxide (PEO)

An effective method for dispersing NiO onto ordered mesoporous silica, SBA-15, is described. The procedure involves the use of polyethylene oxide (PEO) as an encapsulating agent. It can be expected that encapsulation between PEO and Ni2+ ions mainly involves complexes between PEO and Ni2+ ions. Both N2 adsorption/desorption isotherm and TEM analyses indicate that a 2-dimensionally hexagonal pore structure with a distinct pore symmetry (space group P6mm) is maintained throughout the procedure, even though both Ni2+ ions and PEO are present in the middle of the self-assembly of mesostructured silica. The particle size of the NiO increases slightly as a function of PEO concentration. When the ratio of PEO to the templating agent (triblock copolymer, polyethylene oxide-polypropylene oxide-polyethylene oxide) reaches a value of 4.5, ordered mesoporous silica with NiO is hardly formed.     

Interfacial rheology and conformations of triblock copolymers adsorbed onto the water-oil interface

The conformation and the dilatational properties of three non-ionic triblock PEO-PPO-PEO (where PEO is polyethyleneoxide and PPO is polypropyleneoxide) copolymers of different hydrophobicity and molecular weight were investigated at the water-hexane interface. The interfacial behavior of the copolymers was studied by combining dilatational rheology using the oscillating drop method and ellipsometry. From the dilatational rheology measurements the limiting elasticity values, E(0), of the Pluronics as function of surface pressure, Π, and adsorption time were obtained, i.e. E(0)(t) and E(0)(Π). Here, it is shown that E(0)(t) depends on the number of PEO units and on the bulk concentration, showing maximum and minimum surface elasticity values which indicate conformational changes in the interfacial layer. Furthermore, in the framework of the polymer scaling law theory, conformational transitions were discussed in E(0) vs. Π plots. In a dilute regime (Π<14 mN m(-1)) at the water-hexane interface, E(0)=2Π fits well all the data, which indicates a two-dimensional "stretched chain" conformation. Increasing Π, two other interfacial transitions could take place. The different behavior of Pluronic copolymers could be also described by the local minima of E(0), which depends on the hydrophobicity of the copolymers. Conformational transitions observed by interfacial rheology were compared to ellipsometric data. Experimental results were discussed and explained on the basis of two- and three-dimensional copolymer structure taking into account that PPO chains could be partially immersed in hexane and water.     

Structure of polymer-stabilized magnetic fluids: small-angle neutron scattering and mean-field lattice modeling

Small-angle neutron scattering and mean-field lattice modeling were used to characterize a class of water-based magnetic fluids tailored specifically to extract soluble organic compounds from water. The fluids consist of a suspension of approximately 7 nm magnetite (Fe3O4) nanoparticles coated with a bifunctional polymer layer comprised of an outer hydrophilic poly(ethylene oxide) (PEO) region for colloidal stability and an inner hydrophobic poly(propylene oxide) (PPO) region for solubilization of organic compounds. The inner region of the polymer shell is increasingly depleted of water as the fraction of PPO side chains increases. The incorporation of PPO side chains also leads to a small increase in interparticle attraction. The lattice model predicted a shell structure similar to that of a PEO-PPO-PEO triblock copolymer (Pluronic) micelle, with equivalent levels of hydration but with more PEO present in the PPO-rich regions, as the side chains grafted to the surface are less able to segregate than when in free micellar systems.     

Supramolecular formation of triblock copolymers in polar/nonpolar solvents

Triblock copolymers could form supramolecules in either polar or nonpolar solvents at appropriate concentration and temperature ranges or in the presence of additives. The association properties and the structure of supramolecules of PEO-PPO-PEO and PPO-PEO-PPO (PEO and PPO refer to poly(oxyethylene) and poly(oxypropylene), respectively) triblock copolymers in xylene and/or water were investigated by using light scattering, small-angle neutron scattering, and small-angle X-ray scattering. The association process of aqueous solution or water-rich ternary systems was entropy driven and temperature played an important role. The additive, e.g., water in the oil-rich ternary system, played a very important role on the micellization of PEO-PPO-PEO, e.g., Pluronic L64, in xylene. The micelles had a core-shell structure and the micellar shell was rather heavily solvated. At high copolymer concentrations, large aggregates with a lamellar structure was formed and the amount of large aggregates increased with increasing copolymer concentration before gel formation.     

Adsorption studies of polyethers Part II: adsorption onto hydrophilic surfaces

The adsorption of BAB-type triblock copolymers (B=poly(ethylene oxide); A=poly(propylene oxide)) from aqueous solution onto hydrophilic silica particles is described with particular reference to the role of the copolymer composition. The adsorbed amount and the layer thickness were determined by the standard depletion method and photon correlation spectroscopy, respectively. Snowtex-YL silica was used as the adsorbent. The results show an increase in the adsorbed amount with increasing molar masses of both PEO and PPO blocks. The adsorbed layer thickness is found to depend strongly on PEO block mass. Both these parameters (adsorbed amount and hydrodynamic layer thickness) show a maximum as a function of the mole fraction of the PPO block present in the copolymer. The conformation of the adsorbed layer is determined by the surface–copolymer interaction; principally by the interaction of the hydrophilic PEO block with the silica surface. A good qualitative agreement of the experimental results with theoretical predictions and self-consistent mean field calculations has been found.     

Adsorption behavior of PS‐PEO diblock copolymers on silver and alumina surfaces: A surface plasmon resonance study

In this work, the adsorption behavior at the silver/toluene and alumina/toluene interface of polystyrene–polyethylene oxide (PS‐PEO) diblock copolymers of various molecular weights was investigated by implementation of the surface plasmon resonance (SPR) technique. This was accomplished under a careful choice of experimental setup and the use of a suitable physical model for the interpretation of the experimental data. Comparison between polystyrene homopolymer and PS‐PEO diblock copolymer adsorption measurements indicate that PS‐PEO is anchored on the alumina surface via the PEO block, while on silver the copolymer is attached by various chain segments. The measured final adsorption amounts on alumina are typical of end‐attached polymeric brush formation while the dynamics of the adsorption process present two clearly different evolution regimes. This work provides insight into the many advantages of the use of the SPR technique as a valuable tool for similar surface studies. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1580–1591, 2006     

Morphology,thermo-mechanical properties and surface hydrophobicity of nanostructured epoxy thermosets modified with PEO-PPO-PEO triblock copolymer

In this paper, we report on the effect of amphiphilic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer (TBCP) on the miscibility, phase separation, thermomechanical properties and surface hydrophobicity of diglycidyl ether of bisphenol-A (DGEBA)/4,4'-diaminodiphenylmethane (DDM) system. The blends were nanostructured. The phase separation occurred via self-assembly of PPO blocks followed by the reaction induced phase separation of PEO blocks. The surface roughness increased with increase in concentration of TBCP due to increased phase separation of PEO blocks at higher concentration. The phase separated PEO blocks formed the crystalline phase in the amorphous crosslinked epoxy matrix. The TBCP has a strong plasticizing effect on the matrix and decreased the glass transition temperature (T_g) and modulus of the thermoset. The incorporation of TBCP improved impact strength and tensile properties and 5 phr TBCP content was found to be optimum to achieve balanced mechanical performance. Moreover, the thermal stability of the epoxy system was retained while hydrophobicity was improved in the presence of TBCP.     

Rheological Properties of Silica Suspensions in Aqueous Solutions of Block Copolymers and Their Water-Soluble Components

Dynamic moduli of fumed silica suspensions in aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers and PEO homopolymers were measured as a function of surface coverage. Since the block copolymers and PEO are adsorbed on the silica surface through hydrogen bonding between the ether oxygen and the silanol group on the silica surface, the interaction between the silanol groups, which is dominant for the aggregation of silica particles, should be prohibited. Dynamic moduli in the silica suspensions were strongly related to the stability of the silica suspensions and the block copolymer, and the longest PEO portion was useful for stabilizing the silica particles. However, the PEO homopolymer did not support stability of the silica particles, suggesting that chain conformation of the PEO portion in the block copolymer is different from that for the PEO homopolymer. Copyright 2001 Academic Press.