Adsorption of Am(III) on red earth and natural hematite

Summary The Am(III) adsorption isotherms on natural hematite, on a red earth and on three kinds of treated red earth samples were determined and compared. The treatment was performed to remove iron oxides, organic matter (OM) and both. The batch technique and aqueous Am(III) solutions with molarities less than 3 ^. 10^-9 mol/l were used. A very high adsorbability of Am(III) on hematite was found, and in order to decrease the adsorption percentage, stable Eu³⁺ as a hold back carrier was added to the aqueous solution. All the isotherms were found to be linear. The strong effects of pH, ionic strength and fulvic acid (FA) on the Am(III) adsorption on natural hematite were demonstrated. A positive contribution of OM and an unexpectedly high negative influence of iron oxides on the Am(III) adsorption by the untreated red earth were found too. The average distribution coefficients of Am(III) adsorption on natural hematite, on red earth and on three kinds of treated red earth samples were determined, respectively, from these linear isotherms. The very high adsorbability of Am(III) on hematite and the very strong negative influence of iron oxides on the Am(III) adsorption on untreated red earth were distinctly demonstrated as well. It appears that the adsorbability of composed natural materials cannot be predicted from the adsorbabilities of each of the mineral components alone, due to possible interactions between the mineral components and the different characteristics of the composite.     

Ionic strength and pH dependence of binding constants of Am(III)- and Eu(III)-humates

Binding constants of Eu(III)- and Am(III)-complexes with soil-derived humic acid were determined by solvent extraction at various pH and ionic strength. Based on the dependence of binding constants on pH and ionic strength, stabilities of the humate complexes in land water and seawater were estimated. Speciation calculation based on the binding constants indicated that Am(III) could combine with humic substances in natural water system.     

Sorption of Am(Ⅲ) on Na-bentonite:Effect of pH,ionic strength,temperature and humic acid

Sorption of Am(Ⅲ) on Na-bentonite as a function of contact time,pH,ionic strength,humic acid(HA) and temperature was investigated under ambient conditions.The results showed that the sorption was strongly dependent on pH and ionic strength. Am(Ⅲ) sorption can be described well by pseudo-second-order model.The presence of HA takes a positive effect at low pH;but a negative influence under high pH range.Enthalpy,entropy and Gibbs free energy(i.e.,△H~0,△S~0 and△G~0) calculated from sorption isotherms suggested that sorption process of Am(Ⅲ) was spontaneous and endothermic.     

Th(IV) adsorption on alumina: effects of contact time, pH, ionic strength and phosphate

Adsorption of Th(IV) (total concentration, 10(-5)-10(-4) mol/L) was studied by a batch technique. The effects of pH, ionic strength, contact time, and phosphate on the adsorption of Th(IV) onto alumina were investigated. Adsorption isotherms of Th(IV) on alumina at approximately constant pH and three ionic strengths (0.05, 0.1, 0.5 mol/L KNO3) were determined. It was found that the pH values of aqueous solutions of both the Th(IV)-alumina and phosphate-alumina adsorption systems increase with increasing contact time, respectively. Adsorption of Th(IV) on alumina steeply increases with increasing pH from 1 to 4.5 and the adsorption edge consists of three regions. The phosphate added clearly enhances Th(IV) adsorption in the pH range 1-4. From the adsorption isotherms at approximately constant pH and three different ionic strengths, a reduced ionic strength effect was observed and is contradictory to the insensitive effect obtained from the adsorption edges on three oxides of Fe, Al, and Si at different ionic strengths. Compared with the adsorption edges at different ionic strengths, the adsorption isotherms at approximately constant pH and different ionic strengths are more advantageous in the investigation of ionic strength effect. The significantly positive effect of phosphate on Th(IV) adsorption onto alumina was attributed to strong surface binding of phosphate on alumina and the subsequent formation of ternary surface complexes involving Th(IV) and phosphate.     

Sorption behavior of Am(III) onto granite

Sorption behavior of Am(III) onto granite was investigated. The distribution coefficient (K _d ) of Am(III) onto granite was determined in the solution of which pH was ranged from 2.9 to 11.4 and ionic strength was set at 10⁻² and 10⁻¹. TheK _d values were found to increase with increasing pH and with decreasing ionic strength. The obtained data were successfully analyzed by applying an electrical double layer model. The optimum parameter values of the double layer electrostatics and adsorption reactions were obtained, and the selective adsorption behavior of Am(III) onto the granite was discussed.     

Adsorption of Eu(III) on titanate nanotubes studied by a combination of batch and EXAFS technique

The effects of pH,contact time and natural organic ligands on radionuclide Eu(Ⅲ) adsorption and mechanism on titanate nanotubes(TNTs) are studied by a combination of batch and extended X-ray absorption fine structure(EXAFS) techniques.Macroscopic measurements show that the adsorption is ionic strength dependent at pH < 6.0,but ionic strength independent at pH > 6.0.The presence of humic acid(HA) /fulvic acid(FA) increases Eu(Ⅲ) adsorption on TNTs at low pH,but reduces Eu(Ⅲ) adsorption at high pH.The results of EXAFS analysis indicate that Eu(Ⅲ) adsorption on TNTs is dominated by outer-sphere surface complexation at pH < 6.0,whereas by inner-sphere surface complexation at pH > 6.0.At pH < 6.0,Eu(Ⅲ) consists of ～ 9 O atoms at REu?O ≈ 2.40  in the first coordination sphere,and a decrease in NEu-O with increasing pH indicates the introduction of more asymmetry in the first sphere of adsorbed Eu(Ⅲ).At long contact time or high pH values,the Eu(Ⅲ) consists of ～2 Eu at REu-Eu ≈ 3.60  and ～ 1 Ti at REu-Ti ≈ 4.40 ,indicating the formation of inner-sphere surface complexation,surface precipitation or surface polymers.Surface adsorbed HA/FA on TNTs modifies the species of adsorbed Eu(Ⅲ) as well as the local atomic structures of adsorbed Eu(Ⅲ) on HA/FA-TNT hybrids.Adsorbed Eu(Ⅲ) on HA/FA-TNT hybrids forms both ligand-bridging ternary surface complexes(Eu-HA/FA-TNTs) as well as surface complexes in which Eu(Ⅲ) remains directly bound to TNT surface hydroxyl groups(i.e.,binary Eu-TNTs or Eu-bridging ternary surface complexes(HA/FA-Eu-TNTs)).The findings in this work are important to describe Eu(Ⅲ) interaction with nanomaterials at molecular level and will help to improve the understanding of Eu(Ⅲ) physicochemical behavior in the natural environment.     

静态法和EXAFS技术研究Eu(III)在钛酸纳米管上的吸附行为和微观机制

结合静态实验和X射线吸收精细结构谱学(EXAFS)技术研究了pH、时间、有机配体等环境因素对放射性核素Eu(III)在钛酸纳米管上的吸附行为和微观机制的影响.宏观实验结果表明:Eu(III)在钛酸纳米管上的吸附在pH<6.0条件下受离子强度影响,而在pH>6.0条件下不受离子强度影响;腐殖酸HA/FA在低pH条件下可以促进Eu(III)在钛酸纳米管上的吸附,而在高pH条件下抑制Eu(III)在钛酸纳米管上的吸附.EXAFS微观分析结果表明:在pH<6.0条件下,吸附属于外层吸附机理;在pH>6.0条件下,吸附属于内层吸附机理.pH<6.0时,中心原子Eu周围只有Eu-O一个配位层,其平均键长为2.40,配位数在9左右;随着pH逐渐升高,第一配位层的配位数下降,表明吸附Eu原子配位的对称性下降.当吸附时间延长或pH升高,吸附原子Eu周围出现了Eu-Eu和Eu-Ti第二配位层,其平均键长分别为3.60和4.40,配位数分别在2或1左右,表明形成了内层吸附产物或表面沉淀或表面多聚体.腐殖酸HA/FA的存在,可以改变Eu(III)在钛酸纳米管表面的吸附形态和微观原子结构,Eu(III)不仅可以与钛酸纳米管的表面羟基直接键合形成二元表面复合物(Eu-TNTs),还可以通过HA/FA的桥连作用形成三元表面复合物(HA/FA-Eu-TNTs).这些研究结果对于评估放射性核素Eu(III)与纳米材料在分子水平上的作用机理及分析Eu(III)在环境中的物理化学行为具有重要的意义.     

Effects of pH,ionic strength,temperature, and humic acid on Eu(III) sorption onto iron oxides

Effects of pH, Eu(III) concentration, ionic strength, temperature and humic acid (HA) on Eu(III) sorption to iron oxides were investigated in detail. The sorption of Eu(III) to iron oxides was significantly dependent on pH and weakly dependent on ionic strength, and higher temperature was gainful to Eu(III) sorption. In the presence of HA, Eu(III) sorption was enhanced significantly at low pH; whilst obvious negative effect was observed in higher pH range. Below 12 mg/L HA, HA could obviously enhanced Eu(III) sorption to iron oxides, nevertheless Eu(III) sorption decreased steeply with increasing HA while HA exceeded 12 mg/L. The results were helpful for understanding radionuclides behaviors in natural environment.     

Aggregation and dissolution of 4 nm ZnO nanoparticles in aqueous environments: influence of pH, ionic strength, size, and adsorption of humic acid

Metal oxide nanoparticles are used in a wide range of commercial products, leading to an increased interest in the behavior of these materials in the aquatic environment. The current study focuses on the stability of some of the smallest ZnO nanomaterials, 4 ± 1 nm in diameter nanoparticles, in aqueous solutions as a function of pH and ionic strength as well as upon the adsorption of humic acid. Measurements of nanoparticle aggregation due to attractive particle-particle interactions show that ionic strength, pH, and adsorption of humic acid affect the aggregation of ZnO nanoparticles in aqueous solutions, which are consistent with the trends expected from Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Measurements of nanoparticle dissolution at both low and high pH show that zinc ions can be released into the aqueous phase and that humic acid under certain, but not all, conditions can increase Zn(2+)(aq) concentrations. Comparison of the dissolution of ZnO nanoparticles of different nanoparticle diameters, including those near 15 and 240 nm, shows that the smallest nanoparticles dissolve more readily. Although qualitatively this enhancement in dissolution can be predicted by classical thermodynamics, quantitatively it does not describe the dissolution behavior very well.     

Sorption and desorption of Eu(III) on alumina

Summary Effects of ionic strength and of fulvic acid on the sorption of Eu(III) on alumina were investigated by using a batch technique. The experiments were carried out at T=25±1 °C, pH 4-6 and in the presence of 1M NaCl. The results indicate that sorption isotherms of Eu(III) are linear at low pH values. The sorption-desorption of Eu(III) on alumina at pH 4.4 is reversible, but a sorption-desorption hysteresis is found at pH 5.0. Fulvic acid has an obvious positive effect on the sorption of Eu(III) on alumina at low pH values. The migration of Eu(III) in alumina was studied by using column experiments and ^152+154Eu(III) radiotracer at pH 3.8. For column experiments, Eu(III) sorbed on alumina can be desorbed completely from the solid surface at low pH values. The findings are relevant to the evaluation of lanthanide and actinide ions in the environment.     

Alumina interaction with AMPS-MPEG random copolymers III. Effect of PEG segment length on adsorption, electrokinetic and rheological behavior

The effect of different 2-acrylamido-2-methylpropanesulfonic acid sodium salt (AMPS)-methoxypolyethyleneglycol methacrylate (MPEG) comb-like copolymers on the adsorption behavior, electrokinetic and rheological properties of alumina suspensions has been investigated. The change in adsorption isotherms with the content of the two monomers, the medium pH and the ionic strength indicated that the interaction of these copolymers was found to be controlled by both the fraction of ionic groups on the polymer and by the length of the polyethyleneglycol (PEG) segments. Adsorption of the copolymers on alumina particles is accompanied by a shift in the IEP toward acid pH values and may lead to a charge reversal above a certain level. The presence of the PEG segment equally affects the magnitude of the zeta potential by moving the shear plane forward. Addition of the copolymers greatly affects the rheological behavior of the suspension; the viscosity at a defined shear rate decreases and reaches an optimum, which is all the lower as the fraction of the ionic groups is higher. The dispersing effect of the copolymer was controlled by both the ionization level of the copolymer and by the length of the PEG segments.     

Adsorbability and photocatalytic degradability of humic substances in water on Ti-modified silica

From the viewpoint of development of a removal agent for humic substances, we prepared Ti-modified silica gel, SiO2-Ti, from titanium alkoxide and microsized silica gel. The prepared silica agent was investigated in adsorption and photocatalytic degradation of humic substances in water. In these experiments, four humic substances, commercially available Wako humic acid (Wako-HA), Nordic aquatic humic acid (Nordic-HA), Nordic aquatic fulvic acid (Nordic-FA), and Suwannee river fulvic acid (Suwannee-FA), were used, and Freundlich constants (KF and 1/n) and photodegradation rates were evaluated. Wako-HA, which has the highest aromaticity ratio [Ar-OH]/[COOH] and molecular weight, had the highest adsorbability (KF=17.5 (mg/g)(L/mg)(1/n), 1/n=0.67) but the lowest photodegradability (<80%). On the other hand, Suwannee-FA, which has the lowest aromaticity, [Ar-OH]/[COOH] ratio, and molecular weight, afforded lesser adsorbability (KF=7.1 (mg/g)(L/mg)(1/n), 1/n=0.39) but the highest photodegradability (>99%). Nordic-HA and Nordic-FA afforded adsorbabilities similar to that for Suwannee-FA, and medium photodegradabilities between those for Wako-HA and Suwannee-FA. Adsorption and photodegradation capacities of SiO2-Ti were improved with increased Ti content and phosphorescence emission amount, respectively. From XRD analysis, we found that the structure of anatase-type TiO2 features the Ti modifiers of SiO2-Ti. Therefore, humic substance molecules effectively interact with the Ti modifiers and are decomposed by OH radicals generated in situ. We hope that SiO2-Ti will be used as a photodegradation catalyst in water purification plants.     

Effect of pH,ionic strength and humic substances on the adsorption of Uranium (VI) onto Na-rectorite

In this study, the adsorption of U(VI) from aqueous solution on Na-rectorite was studied as a function of various environmental conditions such as contact time, pH, ionic strength, soil humic acid (HA)/fulvic acid (FA), solid contents, and temperature under ambient conditions by using batch technique. The kinetic adsorption is fitted by the pseudo-second-order model very well. The adsorption of U(VI) on Na-rectorite was strongly dependent on pH and ionic strength. A positive effect of HA/FA on U(VI) adsorption was found at low pH, whereas a negative effect was observed at high pH. The presence of HA/FA enhanced the U(VI) adsorption at low pH values, but reduced U(VI) adsorption at high pH. The thermodynamic parameters (ΔH ⁰, ΔS ⁰, and ΔG ⁰) were also calculated from the temperature dependent adsorption isotherms, and the results suggested that the adsorption of U(VI) on Na-rectorite was a spontaneous and endothermic process.     

Energetics of protein adsorption on amine-functionalized mesostructured cellular foam silica

The energetics of lysozyme adsorption on aminopropyl-grafted MCF silica (MCF-NH2) are compared to the trends observed during lysozyme adsorption on native MCF silica using flow microcalorimetry (FMC). Surface modification on MCF silica affects adsorption energetics significantly. All thermograms consist of two initial exothermic peaks and one later endothermic peak, but the heat signal trends of MCF-NH2 are opposite from those observed for adsorption onto native MCF silica in salt solutions of sodium acetate and sodium sulfate. At low ionic strength (0.01 M), LYS adsorption onto MCF-NH2 was accompanied by a large exotherm followed by a desorption endotherm. With increasing ionic strength (0.1 and 3.01 M), the magnitude of the thermal signal decreased and the total process became less exothermic. Also a higher protein loading of 14 μmol g(-1) was obtained at low ionic strength in batch adsorption isotherm measurements. Taken together, the FMC thermograms and batch adsorption isotherms reveal that MCF-NH2 has the nature of an ion exchange adsorbent, even though lysozyme and the aminopropyl ligands have like net charges at the adsorption pH. Reduced electrostatic interaction, reduced Debye length, and increased adsorption-site competition attenuate exothermicity at higher ionic strengths. Thermograms from flow microcalorimetry (FMC) give rich insight into the mechanisms of protein adsorption. A two-step adsorption mechanism is proposed in which negatively charged surface amino acid side chains on the lysozyme surface make an initial attachment to surface aminopropyl ligands by electrostatic interaction (low ionic strength) or van der Waals interaction (high ionic strength). Secondary attachments take place between protruding amino acid side chains and silanol groups on the silica surface. The reduced secondary adsorption heat is attributed to the inhibitory effect of the enhanced steric barrier of aminopropyl group on MCF silica.     

Comparative study on Th(IV) sorption on alumina and silica from aqueous solutions

The effects of pH, ionic strength and concentration on the sorption of Th(IV) on alumina and silica were investigated and the sorption isotherms of Th(IV) on alumina and silica at different pH values were determined. It was found for both sorbents that the absorbability of silica is less than that of alumina. The relative sorption rate of silica is similar to that of alumina. The sorption edges are similar to each other, that the insensitivity of sorption to ionic strength is about the same. These similarities between the sorbents suggest that the speciation of Th(IV) in aqueous solutions plays a significant, but subtle role, in controlling the sorption process, because the charges of both sorbents are distinctly different. The mechanism of Th(IV) sorption on alumina is distinctly different from that of the sorptions of Cs⁺, Eu³⁺ and Yb³⁺ on alumina, and similar to that of the sorption of Co(II) on alumina.     

Biomimetic particles: optimization of phospholipid bilayer coverage on silica and colloid stabilization

The effect of ionic strength and pH on phosphatidylcholine (PC) adsorption from vesicles on silica nanoparticles was investigated over a range of NaCl concentrations (0.1-150 mM) at pH 6.3 and 7.4 from determination of adsorption isotherms, colloid stability, particle sizing, and zeta-potentials. At and above 10 mM ionic strength, pH 6.3, high-affinity adsorption isotherms with limiting adsorption indicative of one-bilayer deposition on each silica particle were obtained. At 10 mM ionic strength, adsorption isotherms indicated lower affinity between PC and silica at pH 7.4 than at pH 6.3, suggesting a role of hydrogen bonding between silanol on silica and phosphate on PC in promoting bilayer deposition at low pH. Under conditions where high affinity and bilayer deposition were achieved, silica sedimentation documented from photographs was absent, suggesting particle stabilization induced by bilayer coverage. However, at physiological (150 mM NaCl) or close to physiological ionic strength (140 mM NaCl), the large colloid stability similarly achieved at pH 6.3 or 7.4 suggested the major role of van der Waals attraction between the PC bilayer vesicle and silica particle in determining bilayer deposition. The effect of increasing ionic strength was increasing van der Waals attraction, which caused PC vesicle disruption with bilayer deposition and bilayer-induced silica stabilization.     

Effect of cation size and charge on the interaction between silica surfaces in 1:1, 2:1, and 3:1 aqueous electrolytes

Application of two complementary AFM measurements, force vs separation and adhesion force, reveals the combined effects of cation size and charge (valency) on the interaction between silica surfaces in three 1:1, three 2:1, and three 3:1 metal chloride aqueous solutions of different concentrations. The interaction between the silica surfaces in 1:1 and 2:1 salt solutions is fully accounted for by ion-independent van der Waals (vdW) attraction and electric double-layer repulsion modified by cation specific adsorption to the silica surfaces. The deduced ranking of mono- and divalent cation adsorption capacity (adsorbability) to silica, Mg(2+) < Ca(2+) < Na(+) < Sr(2+) < K(+) < Cs(+), follows cation bare size as well as cation solvation energy but does not correlate with hydrated ionic radius or with volume or surface ionic charge density. In the presence of 3:1 salts, the coarse phenomenology of the force between the silica surfaces as a function of salt concentration resembles that in 1:1 and 2:1 electrolytes. Nevertheless, two fundamental differences should be noticed. First, the attraction between the silica surfaces is too large to be attributed solely to vdW force, hence implying an additional attraction mechanism or gross modification of the conventional vdW attraction. Second, neutralization of the silica surfaces occurs at trivalent cation concentrations that are 3 orders of magnitude smaller than those characterizing surface neutralization by mono- and divalent cations. Consequently, when trivalent cations are added to our cation adsorbability series the correlation with bare ion size breaks down abruptly. The strong adsorbability of trivalent cations to silica contrasts straightforward expectations based on ranking of the cationic solvation energies, thus suggesting a different adsorption mechanism which is inoperative or weak for mono- and divalent cations.     

Adsorption characteristics of As(V), Se(IV), and V(V) onto activated alumina: effects of pH, surface loading, and ionic strength

Arsenic, selenium, and vanadium are major anionic elements of concern in drinking water. This research investigated the adsorption characteristics of As(V), Se(IV), and V(V) onto a commercial activated alumina (AA) under different pH, surface loading, and ionic strength conditions using batch systems. The results indicated that the adsorption of these elements was significantly affected by pH and the surface loading. However, ionic strength generally did not impact their adsorption, indicating that the electrostatic effect on the adsorption of these elements was relatively not important compared to surface chemical reactions. A speciation-based adsorption model was used to simulate the adsorption of As(V), Se(IV), and V(V) by activated alumina and to determine the adsorption constants of different element species. This model can satisfactorily predict the adsorption of these elements in a broad pH range from 1.5 to 12 and a wide surface loading range from 1.0 to 50 mg/g activated alumina for different sorbent concentrations, using the same set of adsorption constants.     

Adsorption of atrazine from aqueous electrolyte solutions on humic acid and silica

The adsorption of, the still widely used, herbicide atrazine on model soil components, such as humic acid and humic acid-silica gel mixtures, was investigated in a series of batch experiments, under different experimental conditions (ionic strength, temperature, and pH). The investigation aimed at obtaining an estimate of the contribution of each of the soil components on the adsorption of atrazine from aqueous solutions. The kinetics of atrazine adsorption on humic acid showed two steps: a fast step, of a few hours duration, and a second slow step, which continued for weeks. The kinetics of adsorption data gave a satisfactory fit to the Elovich equation. Τhe adsorption of atrazine on the test substrates was found to be reversible in all cases. The atrazine uptake data on the test substrates were fitted best with the Freundlich adsorption isotherm. The ionic strength of the atrazine aqueous solutions did affect the amount of the atrazine adsorbed on the test substrates, suggesting that electrostatic forces between atrazine molecules and soil play a significant role in the adsorption process. An increase of temperature resulted in a decrease of atrazine adsorption on humic acid at low atrazine equilibrium concentrations. However, for higher levels of equilibrium concentrations (≥3 mg/L) the amount of atrazine adsorbed onto the test substrate increased as temperature increased. The calculated isosteric enthalpies of adsorption ranged between slightly exothermic at low atrazine uptake and slightly endothermic at high atrazine uptake, all values being in the range of physisorption.