Comparison of Dorris-Gray and Schultz methods for the calculation of surface dispersive free energy by inverse gas chromatography

Inverse gas chromatography (IGC) is an important technique for the characterization of surface properties of solid materials. A standard method of surface characterization is that the surface dispersive free energy of the solid stationary phase is firstly determined by using a series of linear alkane liquids as molecular probes, and then the acid-base parameters are calculated from the dispersive parameters. However, for the calculation of surface dispersive free energy, generally, two different methods are used, which are Dorris-Gray method and Schultz method. In this paper, the results calculated from Dorris-Gray method and Schultz method are compared through calculating their ratio with their basic equations and parameters. It can be concluded that the dispersive parameters calculated with Dorris-Gray method will always be larger than the data calculated with Schultz method. When the measuring temperature increases, the ratio increases large. Compared with the parameters in solvents handbook, it seems that the traditional surface free energy parameters of n-alkanes listed in the papers using Schultz method are not enough accurate, which can be proved with a published IGC experimental result.     

Inverse gas chromatography applications: A review

Inverse gas chromatography (IGC) is a versatile, powerful, sensitive and relatively fast technique for characterizing the physicochemical properties of materials. Due to its applicability in determining surface properties of solids in any form such as films, fibres and powders of both crystalline and amorphous structures, IGC became a popular technique for surface characterization, used extensively soon after its development. One of the most appealing features of IGC that led to its popularity among analytical scientists in early years was its similarity in principle to analytical gas chromatography (GC). The main aspect which distinguishes IGC experiments from conventional GC is the role of mobile and stationary phases. Contrary to conventional GC, the material under investigation is placed in the chromatographic column and a known probe vapour is used to provide information on the surface.     

Determination of glass temperature of polymers by inverse gas chromatography

Inverse gas chromatography (IGC) is an attractive technique for polymer characterization due to possible simultaneous determination of various physicochemical properties of polymer systems merely from retention times of selected sorbates. The technique is especially advantageous to polymers that cannot be characterized by conventional methods. In this review, the utilization of the method for glass transition determination of homopolymers, copolymers and polymer blends is described. Advantages and drawbacks of the IGC method over traditionally used methods for glass transition temperature determination is discussed, along with the most important parameters that influence the precision and accuracy of the glass transition temperature (T(g)) measurements.     

Inverse gas chromatography as a tool for investigation of nanomaterials

Inverse gas chromatography (IGC) is presented as a representative tool for the investigation of nanomaterials: Aerosil200V and two iron oxides (nanohematite and nanogoethite). IGC was used for characterization of the surface properties of materials. Parameters describing their surface properties are calculated from the retention data of test solutes injected into a column filled with the solid of interest. It is possible to determine the surface activity and the Hamaker constants of different nanomaterials.     

反相气相色谱表征可溶性聚酰亚胺的表面性质

采用反相气相色谱技术,将正己烷、正庚烷、正辛烷、正壬烷作为非极性分子探针,乙醚、丙酮、三氯甲烷作为极性分子探针在50℃、60℃、70℃和80℃条件下测定了可溶性聚酰亚胺HQDPA-DMMDA的表面色散自由能与表面Lewis酸碱性质.HQDPA-DMMDA在50℃、60℃、70℃和80℃的表面色散自由能分别为34.37、31.80、29.50和27.64 mJ/m2,自由能随温度的升高而线性降低.实验发现,HQDPA-DMMDA为弱的Lewis两性聚合物材料,其Lewis酸常数Ka为0.4115,碱常数Kb为0.5812.     

Inverse gas chromatography as a source of physiochemical data

Inverse gas chromatography (IGC) is presented as a useful method for the examination of physicochemical properties of various materials. The advantages of IGC are presented. However, the uncertainties and sources of possible errors are also indicated and discussed.     

Study of a core-shell type impact modifier by inverse gas chromatography

Inverse gas chromatography (IGC) has been used to study the Lewis acid-base properties of a technologically and commercially important core-shell type elastomer (MBS rubber). The parameters determined were the dispersive component of the surface tension, the surface free energy, the enthalpy and the entropy of adsorption of polar and apolar probes, the surface Lewis acidity constant (Ka), and the surface Lewis basicity constant (Kb). The results show that the MBS rubber is amphoteric but strongly Lewis basic. It is weakly Lewis acidic. The results are in accord with the analysis of the molecular structure of PMMA, the shell component of this impact modifier (IM). The interactivity of this elastomer with the remaining materials in multicomponent polymeric systems is expected to be strongly influenced by the particular surface energetic properties of the MBS rubber. The results presented would contribute to the interpretation, forecast and optimization of the adhesion properties and phase preferences shown by this impact modifier when incorporated in such complex polymeric systems as polymer blends and composites.     

Effect of surface heterogeneity on adsorption on solid surfaces. Application of inverse gas chromatography in the studies of energetic heterogeneity of adsorbents

The paper presents a literature review of the chromatographic methods used for investigations of the heterogeneity of solid surfaces. Special attention is paid to inverse gas chromatography (IGC). Quantitative characteristics of heterogeneity of real solid surfaces including extreme models on adsorption centre topography of the "patch-wise" and "random" types are described. Analytical and numerical methods used for calculating the adsorption energy distribution function as a quantitative measure of surface heterogeneity are presented. Special attention is paid to the condensation approximation as well as to other approximations based on this assumption. IGC is presented as a quick, precise and effective method to characterise physicochemical properties of different kinds of adsorbents. Advantages of IGC over traditional methods of gas and vapour adsorption are shown.     

Determination of isotherms by gas-solid chromatography. Applications

This literature review of the fundamental developments in gas-solid adsorption isotherms includes articles published from 1933 until now. Analytical and numerical methods used for calculating the adsorption energy distribution function, as a quantitative measure of surface heterogeneity, are included. Special attention is paid to inverse gas chromatography (IGC) and more precisely to a new version of IGC known as reversed-flow gas chromatography (RF-IGC or RF-GC). RF-GC is presented as a quick, precise and effective method to investigate physicochemical properties of different kinds of adsorbents, through adsorption isotherms and related energetic parameter determinations. Advantages of the RF-GC method over traditional chromatographic methods are discussed.     

Investigation of thermodynamic properties of hyperbranched poly(ester amide) by inverse gas chromatography

Thermodynamic properties of the hyperbranched poly (ester amide) (Hybrane® 1200) were investigated by inverse gas chromatography (IGC) using 19 different solvents as the probes at infinite dilution. Retention data of probes were used for an extensive characterization of the polymer, which includes the determination of the Flory‐Huggins interaction parameter, the weight fraction activity coefficient, the total, partial, and additive solubility parameters. The analysis of the results indicated that the additive value of the solubility parameter is lower than the value obtained from a standard procedure. Furthermore, the solubility parameter decreases with increase of temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2166–2172, 2008     

Surface characterization of cellulose fibres by XPS and inverse gas chromatography

Inverse gas chromatography (IGC) was used to determine the dispersive component of the free energy as well as the acid-base properties of cellulose fibre surfaces, before and after modification by corona treatment. It was found that the corona treatment increases both the dispersive contribution to surface energy and its acidic character, whereas only a slight increase in its basicity was observed. It was also found that some chemical degradation of the surface occurs at high corona currents. The extent of modification of the surface properties, as revealed by IGC, was correlated to the surface chemical composition deduced from XPS analysis as well as with the electrical conductance and the pH of the water suspensions of the cellulose fibres.     

Wetting behaviour,moisture up-take and electrokinetic properties of lignocellulosic fibres

The wetting and moisture up-take behaviour, as well as the electrokinetic properties of various lignocellulosic fibres were characterised. Knowledge of surface and water uptake properties of this kind of materials will help to tailor their potential use in different end user applications. The surface tension of the fibres was determined from wetting measurements using the capillary rise technique. The wetting data were used to determine the surface tension of the fibres. Our results show that the surface tension of the lignocellulosic fibres is a linear function of their cellulose content. Zeta-potential measurements were exploited to characterise the surface chemistry of the fibres. Measuring the zeta-potential as function of time enables the rapid assessment of the water up-take, i.e. the swelling behaviour of the fibres. The results obtained by the zeta potential measurements correlate, with the exception of flax, in a linear manner with the results obtained from conventional moisture uptake measurements. Even though all lignocellulosic fibres are very hydrophilic due to the presence of polar oxygen containing groups they have different grades of hydrophilicity, which is also reflected in the different water uptake capabilities measured. The wetting, moisture uptake and electrokinetic properties of the lignocellulosic fibres are determined by the availability of the surface functional groups present, which is usually consequence of the processes used to separate, and extract the fibres from the plant (retting), as well as any further processing used to improve the fibre quality.     

Improvement of bagasse fiber–cement composites by addition of bacterial nanocellulose: an inverse gas chromatography study

The design of green fiber-reinforced nanocomposites with enhanced properties and durability has attracted attention from scientists. The present study aims to investigate the potential of bacterial nanocellulose (BNC) as a green additive for fiber–cement composites. Inverse gas chromatography (IGC) was used to evaluate the influence of incorporation of BNC as powder or gel, or coated onto the bagasse fibers, on the fiber–cement composite (FCC) surface. The results indicated that BNC incorporation made the FCC surface more reactive, increasing the dispersive component of the surface energy. The most relevant effects were found for BNC incorporation as gel or coated on the fibers. Incorporation of BNC as gel resulted in a predominantly organic FCC surface with substantial decreased surface basicity (K _a/K _b ratio from 2.88 to 5.75). IGC also showed that FCC with BNC incorporated as gel was more susceptible to hydration. However, BNC coated on fibers prevented fiber mineralization, increasing the inorganic materials at the surface, which caused an increase in the surface basicity (K _a/K _b ratio decrease to 2.00). These promising results could contribute to development of a new generation of green hybrid composites. The IGC technique enabled understanding of the physicochemical changes that occur on deliberate introduction of nanosized bacterial cellulose into fiber–cement composites.     

Surface characterization of industrial fibers with inverse gas chromatography

Inverse gas chromatography (IGC) was applied for the determination of the surface characteristics of Tenax carbon fibers and Akzo Nobel Twaron fibers. Furthermore, IGC procedures for the determination of dispersive and acid-base interactions were validated. The data show that too high values for the dispersive component of the surface energy are obtained when the adsorption area occupied by a single adsorbed n-alkane molecule is estimated from parameters of the corresponding liquid. Comparable values are obtained when the Doris-Gray methodology (area per methylene unit) or measured probe areas are employed. For the fibers studied in this work meaningful Gibbs energy values of the acid-base interaction were only obtained with the polarizability approach. When the dispersive interaction of the polar probes with the fiber surface was scaled to the n-alkane interaction via surface tension, the boiling point, or the vapor pressure of the probes often negative acid-base interaction energies were found. From the temperature dependence of the Gibbs energy, the enthalpy of the acid-base interactions of various probes with the carbon and Twaron aramid fibers was determined. However, from these enthalpy values no meaningful acid-base surface parameters could be obtained. Generally, the limited accuracy with which these parameters can be obtained make the usefulness of this procedure questionable. Also the Gibbs energy data of acid-base interaction can provide a qualitative basis to classify the acidity-basicity of the fiber surface. This latter approach requires only a limited data set and is sufficiently rapid to enable the use of IGC as a screening tool for fibers at a production site. For several polar probes significant concentration effects on carbon fibers were observed. At very low probe loadings the interaction with the fiber surface suddenly increases. This effect is caused by the heterogeneity of the interaction energy of the active sites at the surface. A simple procedure to measure the adsorption isotherm at infinite dilution was developed. The determination of the concentration dependence of the interaction of an n-alkane, an acidic and a basic probe was incorporated in the IGC screening procedure of carbon fibers to monitor this heterogeneity.     

Investigation of thermodynamic properties of hyperbranched aliphatic polyesters by inverse gas chromatography

Thermodynamic properties of a series of commercial hyperbranched aliphatic polyesters (Boltorn^® H20, H30 and H40) were examined for the first time by inverse gas chromatography (IGC) using 13 different solvents at infinite dilution as probes. Retention data of probes were utilized for an extensive characterization of polymers, which includes the determination of the Flory–Huggins interaction parameter, the weight fraction activity coefficient as well as the total and partial solubility parameters. Analysis of the results indicated that the total and partial solubility parameters decrease with increase of temperature. Furthermore, upon increase of the molecular weight, while the hydrogen bonding component decreases, no influence on the total solubility parameter is noticed within the experimental error margins. Results from the present study while providing new insight to the thermodynamic characteristics of the examined systems, they are also expected to reflect more general aspects of the behavior of hyperbranched polymers bearing similar end-groups.     

Determination of the acid/base properties of MgY and NH4Y molecular sieves by inverse gas chromatography

The surface characterization of MgY and NH(4)Y zeolites was performed using inverse gas chromatography (IGC). The adsorption thermodynamic parameters (the standard enthalpy (DeltaH degrees ), standard entropy change (DeltaS degrees ), and free energy change of adsorption (DeltaG degrees ), the dispersive component of the surface free energies (gamma(S)(d)), and the acid-base character of the surface of MgY and NH(4)Y zeolites were estimated using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (DeltaG(sp)), the specific enthalpy of adsorption (DeltaH(sp)), and the specific entropy of adsorption (DeltaS(sp)) of polar probes on MgY and NH(4)Y zeolites were determined. The values of the DeltaH(sp) were correlated with both the donor and acceptor numbers of the probes to quantify the acidic K(A) and the basic K(D) parameters of the zeolite surfaces. The values obtained for the K(A) and K(D) parameters indicated a basic character for the surface of MgY and NH(4)Y zeolites.     

Application of inverse gas chromatography in the characterization of raw material used in manufacturing of abrasive materials

The raw material—aloxite used during the manufacturing of grinding tools was characterized by means of inverse gas chromatography (IGC). The surface properties of the different types of aloxite were determined including: (i) the specific surface area; (ii) the dispersive component of surface free energy as well as the sensitivity of this parameter on the environment humidity; and (iii) acidity and basicity of the examined surfaces. The results of our experiments proved the usefulness of IGC in the characterization of this kind of materials.     

Inverse gas chromatography for natural fibre characterisation: dispersive and acid-base distribution profiles of the surface energy

Inverse Gas Chromatography (IGC) is a gas sorption technique to determine the surface energy of natural fibres. The surface energy is directly related to the thermodynamic work of adhesion and it reflects the fibre adsorption capacity and its wettability. However, natural fibres have a complex surface chemistry of numerous organic species and present physical asperities that render the surface energetically heterogeneous. Since IGC is typically performed at infinite dilution where only the higher energetic sites interact with the solvent, a single measure of surface energy is likely to be misleading as the surface energy changes with changing chemical composition. Here we present the dispersive and acid-base surface energy profiles of flax and kenaf fibres as well as continuous filament fibres produced by a dry jet, wet spinning process (cellulose B). We injected a series of n-alkanes at finite dilution to obtain the dispersive energy distribution profile at \(30\,^{\circ }\hbox {C}\) and 0% RH. The acid-base contributions were determined by injection of mono polar probes (dichloromethane, ethylacetate) at the same surface coverages and applying the Van Oss method. The cellulose B fibres were the most energetically homogeneous, while the bast fibres were shown to have a higher polar component and much broader surface energy distributions than the cellulose fibres.     

反气相色谱法测定锌镁铝类水滑石的表面性能

采用水热合成法制备了锌镁铝类水滑石(ZnMgAl-HTLC),利用X射线衍射仪(XRD)对ZnMgAl-HTLC的晶体结构进行了表征,并以一系列非极性和极性分子为探针分子,采用反气相色谱法(IGC)研究了ZnMgAl-HTLC的表面性能.结果表明:XRD特征衍射峰窄、尖、高,水热合成法能够制得纯度较高的ZnMgAl-HTLC; ZnMgAl-HTLC表面吸附自由能小于零,表面色散自由能最大为6.02 mJ/m²,酸碱作用自由能最大为5.33 kJ/mol,吸附焓为43.6 kJ/mol,吸附熵为0.15 kJ/mol.本文的反气相色谱方法对研究锌镁铝类水滑石的表面性能具有重要的指导意义.