Effect of Hall and ion-slip on the peristaltic transport of nanofluid: A biomedical application

The peristaltic flow of viscous nanofluid in a channel with compliant walls is examined. The flow analysis is presented in the presence of Hall and ion-slip effects. The resulting equations through long wavelength and low Reynolds number approaches are solved. Stream function is obtained in closed form. Attention has been given to the influence of Brownian motion, thermophoresis and Hall and ion slip parameters on the velocity, temperature and concentration profiles. The results show an affective increase in the temperature and nanoparticles concentration with the increase in the strength of Brownian motion effects. Similar results are observed for Hall and ion slip parameters. Further heat transfer coefficient is an increasing function of Hall and ion-slip parameters. Also decrease in the size of trapped bolus is shown for Hall and ion-slip parameters.     

Three-Dimensional Hybrid Nanofluid Flow and Heat Transfer past a Permeable Stretching/Shrinking Sheet with Velocity Slip and Convective Condition

The present work deals with the three-dimensional hybrid Cu-Al₂O₃/water nanofluid flow towards a stretching/shrinking sheet with the presence of velocity slip and convective conditions. A permeable sheet is considered to maintain the shrinking flow through an adequate wall mass suction. The nonlinear governing boundary layer coupled with energy equations are transformed into the ordinary differential equations using similarity transformation. Numerical computations are performed with the aid of boundary value problem solver (bvp4c) in the Matlab software and the results are presented in the tables and graphs. The boundary layer separation occurs in the shrinking flow region. An upsurge of slip and copper nanoparticle volume fraction parameters can increase the range of first and second solutions whereas Biot parameter give zero impact on delaying the boundary layer separation. However, an increase of Biot and slip parameters can boost the heat transfer rate while opposite result is obtained with the augmentation of the copper solid volume fraction. The stability of both solutions are examined, and it is validated that the first (upper branch) solution is more stable than second solution.     

Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.     

Numerical simulation of Electrokinetically Driven Peristaltic Pumping of Silver-Water Nanofluids in an asymmetric microchannel

This article intends to focus on the theoretical and numerical investigation of the peristaltic pumping of water-based silver nanofluid in the presence of electroosmotic forces. The investigation is carried out in an asymmetric microchannel subject to the influence of mixed convection and viscous dissipation. No-slip boundary conditions for velocity, temperature, and nanoparticle volume fraction are imposed on channel walls. The lubrication approach is utilized to simplify the normalized constitutive equations. The distribution of electric potential in the electric double layer is characterized by Poisson-Boltzmann ionic distribution which is further linearized by Debye-Hückel approximation. Nanofluid properties are predicted by a combination of the Buongiorno two-phase mixture model and homogeneous flow model. Additionally, the effective thermal conductivity and dynamic viscosity of silver-water nanofluid are characterized by the Corcione model. Silver nanoparticles of 20nm diameter are utilized in this suspension. The transformed set of nonlinear and coupled equations is numerically executed for axial velocity, temperature, and nanoparticle volume fraction by employing the mathematical software Maple 17. Pumping and trapping phenomena are also investigated. A comparison between the thermal conductivity of nanofluid predicted by the Corcione model and the Maxwell model is further presented. The influence of various flow parameters is outlined through graphical results. It has been observed that the thermal conductivity of silver-water nanofluid enhances with increasing nanoparticle volume fraction and temperature but decreases for larger sized nanoparticles. Moreover, the heat transfer rate rises significantly when smaller silver nanoparticles are suspended in water. Furthermore, the temperature of nanofluid is directly related to the Debye length parameter and the Helmholtz- Smoluchowski velocity parameter.     

Ferromagnetic CNT suspended H2O+Cu nanofluid analysis through composite stenosed arteries with permeable wall

In the present article magnetic field effects for CNT suspended copper nanoparticles for blood flow through composite stenosed arteries with permeable wall are discussed. The CNT suspended copper nanoparticles for the blood flow with water as base fluid is not explored yet. The equations for the CNT suspended Cu–water nanofluid are developed first time in the literature and simplified using long wavelength and low Reynolds number assumptions. Exact solutions have been evaluated for velocity, pressure gradient, the solid volume fraction of the nanoparticles and temperature profile. Effect of various flow parameters on the flow and heat transfer characteristics is utilized. It is also observed that with the increase in slip parameter blood flows slowly in arteries and trapped bolus increases.     

Effect of slip boundary condition on flow and heat transfer of a double fractional Maxwell fluid

The purpose of the present paper is to investigate the flow and heat transfer of a double fractional Maxwell fluid with a second order slip model. The fractional governing equations are solved numerically by using the finite difference method. By comparing the analytical solutions of special boundary conditions, the validity of the present numerical method is examined. The effects of the two slip parameters and the fractional parameters on the velocity and temperature distribution are presented graphically and discussed. The results reveal that the fractional Maxwell fluid exhibits a stronger viscosity or elasticity for different fractional parameters, and the oscillation phenomenon will gradually decrease as expected with an increase in slip parameters.     

Cubic Auto-Catalysis Reactions in Three-Dimensional Nanofluid Flow Considering Viscous and Joule Dissipations Under Thermal Jump

In this problem, simultaneous effects of Joule and viscous dissipationin three-dimensional flow of nanoliquid have been addressed in slip flow regime under timedependent rotational oscillations. Silver nanoparticles are submerged in the base fluid (water)due to their chemical and biological features. To increment the novelty, effects of cubicautocatalysis chemical reactions and radiative heat transfer have been incorporated in therelated boundary layer equations. Dimensionless partial differential system is solved byemploying the proposed implicit finite difference approach. Convergence conditions andstability criteria are obtained to ensure the convergence and accuracy of solutions.A comparative analysis is proposed for no-slip nanofluid flow (NSNF) and slip nanofluid flow(SNF). Variations in skin-friction coefficients, Sherwood and Nusselt numbers against physicalparameters are tabulated. It is investigated that velocity slip and temperature jump significantlycontrol drag forces and rate of heat transfer.     

The effects of different nano particles of Al2O3 and Ag on the MHD nano fluid flow and heat transfer in a microchannel including slip velocity and temperature jump

The forced convection of nanofluid flow in a long microchannel is studied numerically according to the finite volume approach and by using a developed computer code. Microchannel domain is under the influence of a magnetic field with uniform strength. The hot inlet nanofluid is cooled by the heat exchange with the cold microchannel walls. Different types of nanoparticles such as Al₂O₃ and Ag are examined while the base fluid is considered as water. Reynolds number are chosen as Re=10 and Re=100. Slip velocity and temperature jump boundary conditions are simulated along the microchannel walls at different values of slip coefficient for different amounts of Hartmann number. The investigation of magnetic field effect on slip velocity and temperature jump of nanofluid is presented for the first time. The results are shown as streamlines and isotherms; moreover the profiles of slip velocity and temperature jump are drawn. It is observed that more slip coefficient corresponds to less Nusselt number and more slip velocity especially at larger Hartmann number. It is recommended to use Al₂O₃-water nanofluid instead of Ag-water to increase the heat transfer rate from the microchannel walls at low values of Re. However at larger amounts of Re, the nanofluid composed of nanoparticles with higher thermal conductivity works better.     

MHD flow study of viscous fluid through a complex wavy curved surface due to biomimetic propulsion under porosity and second-order slip effects

The steady laminar flow of viscous fluid from a curved porous domain under a radial magnetic field is considered. The fluid flow by a curved domain is due to peristaltic waves present at the boundary walls. The whole analysis is based on porosity(Darcy number) effects. Moreover, the effects of second-order slip on the rheology analysis are also discussed. Due to the complex nature of the flow regime, we have governed the rheological equations by using curvilinear coordinates in the fixed frame. The physical influence of magnetic(Hartmann number) and porosity(Darcy number)parameters on the rheological features of peristaltic transportation are argued in detailed(in the wave frame). Additionally, in the current study, the complex wavy pattern on both boundary walls of the channel is used. The whole rheological study is based on ancient, but medically valid,assumptions of creeping phenomena and long wavelength assumptions. Analytical solutions of the governing equations are obtained by using the simple integration technique in Mathematica software 11.0. The core motivation of the present analysis is to perceive the physical influence of embedded parameters, such as the dimensionless radius of the curvature parameter, magnetic parameter, porosity parameter, different amplitude ratios of complex peristaltic waves, first-and second-order slip parameters, on the axial velocity, pressure gradient, local wall shear stress,tangential component of the extra-stress tensor, pumping and trapping phenomena.     

Hall effect on MHD flow and heat transfer of nanofluids over a stretching wedge in the presence of velocity slip and Joule heating

This paper deals with the boundary layer flow and heat transfer of nanofluids over a stretching wedge with velocity-slip boundary conditions. In this analysis, Hall effect and Joule heating are taken into consideration. Four different types of water-base nanofluids containing copper (Cu), silver (Ag), alumina (Al₂O₃), and titania (TiO₂) nanoparticles are analyzed. The partial differential equations governing the flow and temperature fields are converted into a system of nonlinear ordinary differential equations using a similarity transformation. The resulting similarity equations are then solved by using the shooting technique along with the fourth order Runge-Kutta method. The effects of types of nanoparticles, the volume fraction of nanoparticles, the magnetic parameter, the Hall parameter, the wedge angle parameter, and the velocityslip parameter on the velocity and temperature fields are discussed and presented graphically, respectively.     

Numerical analysis for peristalsis of Carreau–Yasuda nanofluid in an asymmetric channel with slip and Joule heating effects

This study investigates the peristaltic transport of magnetohydrodynamic (MHD) Carreau–Yasuda nanofluid through an asymmetric channel. Viscous dissipation, Joule heating and Hall effects are also included in the analysis. Velocity, thermal and concentration slip conditions are considered. The problem is modeled subject to long wavelength and low Reynolds number assumptions. Resulting nonlinear equations are numerically solved. Impact of embedded parameters on the fluid velocity, temperature, concentration of nanoparticles and heat and mass transfer rates at the wall are examined. Graphical results show that an escalation in the strength of appliedmagnetic field and increase in the value of Hall parameter reduce the velocity of nanofluid. Brownian motion and thermophoresis effects increase the temperature of the nanofluid. The present study shows an excellent agreement with the previously available studies in the limiting case.     

Effects of thermal stratification on transient free convective flow of a nanofluid past a vertical plate

An analysis of thermal stratification in a transient free convection of nanofluids past an isothermal vertical plate is performed. Nanofluids containing nanoparticles of aluminium oxide, copper, titanium oxide and silver having volume fraction of the nanoparticles less than or equal to 0.04 with water as the base fluid are considered. The governing boundary layer equations are solved numerically. Thermal stratification effects and volume fraction of the nanoparticles on the velocity and temperature are represented graphically. It is observed that an increase in the thermal stratification parameter decreases the velocity and temperature profiles of nanofluids. An increase in the volume fraction of the nanoparticles enhances the temperature and reduces the velocity of nanofluids. Also, the influence of thermal stratification parameter and the volume fraction of the nanoparticles of local as well as average skin friction and the rate of heat transfer of nanofluids are discussed and represented graphically. The results are found to be in good agreement with the existing results in literature.     

Axisymmetric convection flow of fractional Maxwell fluid past a vertical cylinder with velocity slip and temperature jump

A novel finite volume method is developed to investigate the axisymmetric convection flow and heat transfer of fractional viscoelastic fluid past a vertical cylinder. Fractional cylindrical governing equations are formulated by fractional Maxwell model and generalized Fourier's law. The velocity slip and temperature jump boundary conditions are considered across the fluid-solid interface. Numerical results are validated by exact solutions of special case with source terms. The effects of fractional derivative parameter and boundary condition parameters on flow and heat transfer characteristics are discussed. The viscoelastic fluid performs evident shear thickening property in the fractional Maxwell constitutive relation. Moreover, the boundary condition parameters have remarkable influence on velocity and temperature distributions.     

Influence of metallic nanoparticles in water driven along a wavy circular cylinder

In the present study, simultaneous effects of metallic nanoparticles and magnetohydrodynamic due to stagnation point flow of nanofluid along a wave circular cylinder is presented. The effect of induced magnetic field is incorporated to deal the boundary and thermal boundary layer domain. Mathematical modelling for momentum and energy equation is constructed that is based upon three different kinds of nanoparticles namely: copper (Cu), Titanium di oxide (TiO₂), and alumina (Al₂O₃) within the working fluid water. Each mixture is analysed at the individual level and made comparison amongst all the mixture to examine the resistance and thermal conductivity of nanofluid within the boundary layer region. The solutions are exposed via boundary value problem using shooting method along with the Runge-Kutta-Fehlberg method. The characteristics of emerging parameters for the fluid flow and heat transfer are discussed through graphs and tables. The effects of ϕ (nanoparticle volume fraction) on heat transfer and shear stress at the wall are analysed in detail. It is finally concluded that by increasing the ratio of nanoparticles there is a significant increase in the temperature but slight decrease in the velocity profile.     

Variable viscosity effects on the flow of MHD hybrid nanofluid containing dust particles over a needle with Hall current—a Xue model exploration

This study scrutinizes the flow of engine oil-based suspended carbon nanotubes magneto-hydrodynamics (MHD) hybrid nanofluid with dust particles over a thin moving needle following the Xue model. The analysis also incorporates the effects of variable viscosity with Hall current. For heat transfer analysis, the effects of the Cattaneo-Christov theory and heat generation/absorption with thermal slip are integrated into the temperature equation. The Tiwari-Das nanofluid model is used to develop the envisioned mathematical model. Using similarity transformation, the governing equations for the flow are translated into ordinary differential equations. The bvp4c method based on Runge-Kutta is used, along with a shooting approach. Graphs are used to examine and depict the consequences of significant parameters on involved profiles. The results revealed that the temperature of the fluid and boundary layer thickness is diminished as the solid volume fraction is raised. Also, with an enhancement in the variable viscosity parameter, the velocity distribution becomes more pronounced. The results are substantiated by assessing them with an available study.     

Slip flow of MHD Casson fluid in an inclined channel with variable transport properties

Due to the instructive role of the peristaltic phenomenon in the human body, interests have been developed in recent years towards peristaltic transport with various thermo-physical features. The current investigation reveals the effects of the magnetic field and variable transport properties on the peristaltic transport of a Casson fluid slip flow through an inclined channel. Nonlinear coupled partial differential equations regulate the fluid flow. Through the perturbation method, the momentum and energy equations are solved for small values of variable viscosity and thermal conductivity, and the closed-form solution is obtained for mass transfer. The impact on physiological quantities of related parameters of interest is evaluated and discussed via graphs. The results obtained for the current flow represent some interesting behaviors which have applications in the biomedical field.     

Magnetohydrodynamics (MHD) axisymmetric flow and heat transfer of a hybrid nanofluid past a radially permeable stretching/shrinking sheet with Joule heating

The main interest of the present work is to fundamentally investigate the flow characteristics and heat transfer of a hybrid Cu-Al₂O₃/water nanofluid due to a radially stretching/shrinking surface with the mutual effects of MHD, suction and Joule heating. The surface is permeable to physically allow the wall mass fluid suction. Tiwari and Das model of nanofluid is used with the new thermophysical properties of hybrid nanofluid to represent the problem. A similarity transformation is adopted to convert the governing model (PDEs) into a nonlinear set of ordinary differential equations (ODEs). A bvp4c solver in MATLAB software is employed to numerically compute the transformed system. The numerical results are discussed and graphically manifested in velocity and temperature profiles, as well as the skin friction coefficient and heat transfer rate with the pertinent values of the dimensionless parameters namely magnetic, Cu volume fraction, suction and Eckert number. The Eckert number has no impact on the boundary layer separation while the higher value of the suction parameter may affect the heat transfer performance. The presence of dual solutions (first and second) is seen on all the profiles within a limited range of the physical parameters. The stability analysis is executed, and it is validated that the first solution is the real solution.     

Anisotropic slip magneto-bioconvection flow from a rotating cone to a nanofluid with Stefan blowing effects

A mathematical model for two dimensional steady laminar natural convective anisotropic slip boundary layer flows from a rotating vertical cone embedded in ethylene glycol bionanofluid is presented. The influence of Stefan blowing is also taken into account. Four different non-particles namely Copper (Cu), Alumina (Al₂O₃), Copper Oxide (Cuo), Titanium Oxide (TiO₂) are explored. Suitable similarity transformations are used to convert the governing equations into non-linear ordinary differential equations. These are then solved numerically, with appropriate boundary conditions, utilizing an implicit finite difference method (the BVP5C code in MATLAB). During computation Sc, Lb, Le and Lb are presented as unity, whilst $\mathrm{Pr}$ is taken as 151. The effects of the governing parameters on the dimensionless velocities, temperature, nanoparticle volume fraction, density of motile microorganisms as well as on the local skin friction, local Nusselt, Sherwood number and motile micro-organism number density are thoroughly examined via tables and graphs. It is found that the skin friction factor increases with tangential slip, magnetic field and Schmidt number whilst it decreases with blowing parameter and spin parameters. It is further observed that both the friction and heat transfer rates are highest for copper nanoparticles and lowest for TiO₂nanoparticles. Validation of the BVP5C numerical solutions with published results for several special cases of the general model is included. The study is relevant to electro-conductive bio-nano-materials processing.     

FEM for Blood-Based SWCNTs Flow Through a Circular Cylinder in a Porous Medium with Electromagnetic Radiation

This work aims to study magnetohydrodynamic flow through a circular cylinder in a horizontal position of SWCNTs in blood as a base fluid in the existence of non-linear thermal radiation and heat source/sink. Three kinds of nanoparticles shapes are considered. The study is employed the finite element technique to explore and enhance the influences of essential parameters on temperature profiles and is debated the heat transport within blood injects with SWCNTs and exposes to electromagnetic radiation. The treatment with thermal analysis and heat transfer rate being a better substitute more than surgery and chemotherapy for cancer therapy. Utilizing of nanoparticles thermal features is a mounting area of nanomedicine field because of the probable for purposeful demolition of cancer cells.This remedy is relied on many parameters, including nanofluid thermal conductivity, nanoparticles volume fraction,thermal radiation and power and heat source. The numerical solutions for flow and heat transfer features are assessed for diverse governing parameters values. The obtained results are substantiated against the relevant numerical results in the published researches. Results show that both flow velocity and temperature increase for larger values of thermal radiation, heat source and SWCNTs volume fraction with lamina and cylinder shapes. Also, spherical shape of SWCNTs occurs high disturbances in velocity and temperature distribution in the case of cooled cylinder.     

Numerical simulation of tissue freezing by liquid nitrogen based cryoprobe

A model is presented to simulate the cooling processes during tumor cryosurgery with different kinds of flows through the cryoprobe. The heat flux between the cryoprobe wall and the tumor, the heat transfer coefficient under different inflow conditions are obtained numerically. The impact of the inlet mass flow rate, gas volume fraction on these parameters is investigated. It is found that the heat transfer coefficient decreased significantly when inflow changed from two-phase annular flow to droplet flow, and to gas flow. The inlet gas volume fraction and flow velocity only significantly affect the freezing ability of the probe when the inflow is gas or in droplet phase. Simulation of the tumor temperature profiles under different flow conditions show that the heat transfer coefficient is a crucial parameter in temperature prediction during cryosurgery. Results indicate that when the cryoprobe wall is assumed at a constant temperature conventionally, the cooling effect could be overestimated. It would be more reasonable to use the constant wall heat transfer coefficient to simulate the cooling progress under a specific flow.