Adenine Components in Biomimetic Metal–Organic Frameworks for Efficient CO2 Photoconversion

Visible‐light driven photoconversion of CO₂ into energy carriers is highly important to the natural carbon balance and sustainable development. Demonstrated here is the adenine‐dependent CO₂ photoreduction performance in green biomimetic metal–organic frameworks. Photocatalytic results indicate that AD‐MOF‐2 exhibited a very high HCOOH production rate of 443.2 μmol g^?1 h^?1 in pure aqueous solution, and is more than two times higher than that of AD‐MOF‐1 (179.0 μmol g^?1h^?1) in acetonitrile solution. Significantly, experimental and theoretical evidence reveal that the CO₂ photoreduction reaction mainly takes place at the aromatic nitrogen atom of adenine molecules through a unique o‐amino‐assisted activation rather than at the metal center. This work not only serves as an important case study for the development of green biomimetic photocatalysts used for artificial photosynthesis, but also proposes a new catalytic strategy for efficient CO₂ photoconversion.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Encapsulating Perovskite Quantum Dots in Iron‐Based Metal–Organic Frameworks (MOFs) for Efficient Photocatalytic CO2 Reduction

Improving the stability of lead halide perovskite quantum dots (QDs) in a system containing water is the key for their practical application in artificial photosynthesis. Herein, we encapsulate low‐cost CH₃NH₃PbI₃ (MAPbI₃) perovskite QDs in the pores of earth‐abundant Fe‐porphyrin based metal organic framework (MOF) PCN‐221(Fe_x) by a sequential deposition route, to construct a series of composite photocatalysts of MAPbI₃@PCN‐221(Fe_x) (x=0–1). Protected by the MOF the composite photocatalysts exhibit much improved stability in reaction systems containing water. The close contact of QDs to the Fe catalytic site in the MOF, allows the photogenerated electrons in the QDs to transfer rapidly the Fe catalytic sites to enhance the photocatalytic activity for CO₂ reduction. Using water as an electron source, MAPbI₃@PCN‐221(Fe_0.2) exhibits a record‐high total yield of 1559 μmol g^?1 for photocatalytic CO₂ reduction to CO (34 %) and CH₄ (66 %), 38 times higher than that of PCN‐221(Fe_0.2) in the absence of perovskite QDs.     

Eosin Y‐Functionalized Conjugated Organic Polymers for Visible‐Light‐Driven CO2 Reduction with H2O to CO with High Efficiency

Visible‐light‐driven photoreduction of CO₂ to energy‐rich chemicals in the presence of H₂O without any sacrifice reagent is of significance, but challenging. Herein, Eosin Y‐functionalized porous polymers (PEosinY‐N, N=1–3), with high surface areas up to 610 m² g^?1, are reported. They exhibit high activity for the photocatalytic reduction of CO₂ to CO in the presence of gaseous H₂O, without any photosensitizer or sacrifice reagent, and under visible‐light irradiation. Especially, PEosinY‐1 derived from coupling of Eosin Y with 1,4‐diethynylbenzene shows the best performance for the CO₂ photoreduction, affording CO as the sole carbonaceous product with a production rate of 33 μmol g^?1 h^?1 and a selectivity of 92 %. This work provides new insight for designing and fabricating photocatalytically active polymers with high efficiency for solar‐energy conversion.     

Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

Stable Heterometallic Cluster‐Based Organic Framework Catalysts for Artificial Photosynthesis

A series of stable heterometallic Fe₂M cluster‐based MOFs ( NNU‐31‐M , M=Co, Ni, Zn) photocatalysts are presented. They can achieve the overall conversion of CO₂ and H₂O into HCOOH and O₂ without the assistance of additional sacrificial agent and photosensitizer. The heterometallic cluster units and photosensitive ligands excited by visible light generate separated electrons and holes. Then, low‐valent metal M accepts electrons to reduce CO₂, and high‐valent Fe uses holes to oxidize H₂O. This is the first MOF photocatalyst system to finish artificial photosynthetic full reaction. It is noted that NNU‐31‐Zn exhibits the highest HCOOH yield of 26.3 μmol g^?1 h^?1 (selectivity of ca. 100 %). Furthermore, the DFT calculations based on crystal structures demonstrate the photocatalytic reaction mechanism. This work proposes a new strategy for how to design crystalline photocatalyst to realize artificial photosynthetic overall reaction.     

Isolated Square‐Planar Copper Center in Boron Imidazolate Nanocages for Photocatalytic Reduction of CO2 to CO

Photocatalytic reduction of CO₂ to value‐added fuel has been considered to be a promising strategy to reduce global warming and shortage of energy. Rational design and synthesis of catalysts to maximumly expose the active sites is the key to activate CO₂ molecules and determine the reaction selectivity. Herein, we synthesize a well‐defined copper‐based boron imidazolate cage (BIF‐29) with six exposed mononuclear copper centers for the photocatalytic reduction of CO₂. Theoretical calculations show a single Cu site including weak coordinated water delivers a new state in the conduction band near the Fermi level and stabilizes the *COOH intermediate. Steady‐state and time‐resolved fluorescence spectra show these Cu sites promote the separation of electron–hole pairs and electron transfer. As a result, the cage achieves solar‐driven reduction of CO₂ to CO with an evolution rate of 3334 μmol g^?1 h^?1 and a high selectivity of 82.6 %.     

Strong‐Base‐Assisted Synthesis of a Crystalline Covalent Triazine Framework with High Hydrophilicity via Benzylamine Monomer for Photocatalytic Water Splitting

Methods to synthesize crystalline covalent triazine frameworks (CTFs) are limited and little attention has been paid to development of hydrophilic CTFs and photocatalytic overall water splitting. A route to synthesize crystalline and hydrophilic CTF‐HUST‐A1 with a benzylamine‐functionalized monomer is presented. The base reagent used plays an important role in the enhancement of crystallinity and hydrophilicity. CTF‐HUST‐A1 exhibits good crystallinity, excellent hydrophilicity, and excellent photocatalytic activity in sacrificial photocatalytic hydrogen evolution (hydrogen evolution rate up to 9200 μmol g^?1 h^?1). Photocatalytic overall water splitting is achieved by depositing dual co‐catalysts in CTF‐HUST‐A1, with H₂ evolution and O₂ evolution rates of 25.4 μmol g^?1 h^?1 and 12.9 μmol g^?1 h^?1 in pure water without using sacrificial agent.     

Efficient Visible‐Light‐Driven CO2 Reduction Mediated by Defect‐Engineered BiOBr Atomic Layers

Solar CO₂ reduction efficiency is largely limited by poor photoabsorption, sluggish electron–hole separation, and a high CO₂ activation barrier. Defect engineering was employed to optimize these crucial processes. As a prototype, BiOBr atomic layers were fabricated and abundant oxygen vacancies were deliberately created on their surfaces. X‐ray absorption near‐edge structure and electron paramagnetic resonance spectra confirm the formation of oxygen vacancies. Theoretical calculations reveal the creation of new defect levels resulting from the oxygen vacancies, which extends the photoresponse into the visible‐light region. The charge delocalization around the oxygen vacancies contributes to CO₂ conversion into COOH* intermediate, which was confirmed by in situ Fourier‐transform infrared spectroscopy. Surface photovoltage spectra and time‐resolved fluorescence emission decay spectra indicate that the introduced oxygen vacancies promote the separation of carriers. As a result, the oxygen‐deficient BiOBr atomic layers achieve visible‐light‐driven CO₂ reduction with a CO formation rate of 87.4 μmol g^?1 h^?1, which was not only 20 and 24 times higher than that of BiOBr atomic layers and bulk BiOBr, respectively, but also outperformed most previously reported single photocatalysts under comparable conditions.     

Visible‐Light‐Induced Generation of H2 by Nanocomposites of Few‐Layer TiS2 and TaS2 with CdS Nanoparticles

Graphene analogues of TaS₂ and TiS₂ (3–4 layers), prepared by Li intercalation followed by exfoliation in water, were characterized. Nanocomposites of CdS with few‐layer TiS₂ and TaS₂ were employed for the visible‐light‐induced H₂ evolution reaction (HER). Benzyl alcohol was used as the sacrificial electron donor, which was oxidized to benzaldehyde during the reaction. Few‐layer TiS₂ is a semiconductor with a band gap of 0.7 eV, and its nanocomposite with CdS showed an activity of 1000 μmol h^?1 g^?1_. The nanocomposite of few‐layer TaS₂, in contrast, gave rise to higher activity of 2320 μmol h^?1 g^?1, which was attributed to the metallic nature of few‐layer TaS₂. The amount of hydrogen evolved after 20 and 16 h for the CdS/TiS₂ and CdS/TaS₂ nanocomposites was 14833 and 28132 μmol, respectively, with turnover frequencies of 0.24 and 0.57 h^?1, respectively.     

Electrocatalysis of N2 to NH3 by HKUST‐1 with High NH3 Yield

Electrolytic ammonia synthesis from nitrogen at ambient conditions is appearing as a promising alternative to the Haber‐Bosch process which is consuming high energy and emitting CO₂. Here, a typical MOF material, HKUST‐1 (Cu?BTC, BTC=benzene‐1,3,5‐tricarboxylate), was selected as an electrocatalyst for the reaction of converting N₂ to NH₃ under ambient conditions. At ?0.75 V vs. reversible hydrogen electrode, it achieves excellent catalytic performance in the electrochemical synthesis of ammonia with high NH₃ yield (46.63 μg h^?1 mg^?1 _cat. or 4.66 μg h^?1 cm^?2) and good Faraday efficiency (2.45%). It is indicated that the good performance of the HKUST‐1 catalyst may originate from the formation of Cu(I). In addition, the catalyst also has good selectivity for N₂ to NH₃.     

Enhancing photocatalytic performance of metal-organic frameworks for CO2 reduction by a bimetallic strategy

Metal-organic frameworks（MOFs） as a type of crystalline heterogeneous catalysts have shown potential application in photocatalytic CO₂ reduction.However,MOF catalysts with high efficiency and selectivity are still in pursuit.Herein,by a bimetallic strategy,the catalytic performance of a Co-MOF for photocatalytic CO₂ reduction was enhanced.Specifically,the Co-MOF based on 4,5-dicarboxylic acid（H₃ IDC） and4,4’-bipydine（4,4’-bpy） can catalyze CO₂ reductio...     

Visible‐Light‐Driven Overall Water Splitting Boosted by Tetrahedrally Coordinated Blende Cobalt(II) Oxide Atomic Layers

Directly splitting water into H₂ and O₂ with solar light is extremely important; however, the overall efficiency of water splitting still remains extremely low. Two types of ultrathin semiconductor layers with the same elements and the same thicknesses were designed to uncover how different atomic arrangements influence water‐splitting efficiency thermodynamically and kinetically. As an example, tetrahedrally coordinated blende and octahedrally coordinated rocksalt CoO atomic layers with nearly the same thicknesses were synthesized for the first time. The blende CoO atomic layers have a smaller E_g and abundant d–d internal transition features relative to the rocksalt CoO atomic layers, which ensure enhanced visible‐light harvesting ability. Density functional theory calculations reveal that the Bader charge for Co atoms in blende CoO atomic layers is larger than that of the rocksalt CoO atomic layers, which facilitates photocarrier transfer kinetics, as verified by photoluminescence spectra and time‐resolved fluorescence emission decay spectra. In situ FTIR spectra and energy calculations reveal that the *OOH dissociation step is the rate‐limiting step, where the blende CoO atomic layers possess a smaller *OOH dissociation energy thanks to their higher Bader charge and stronger steric effect, as confirmed by the elongated Co?OOH bonds. The blende CoO atomic layers exhibit visible‐light‐driven H₂ and O₂ formation rates of 4.43 and 2.63 μmol g^?1 h^?1, roughly 3.7 times higher than those of the rocksalt CoO atomic layers.     

Multifunctional Nitrogen‐Doped Carbon Nanodots for Photoluminescence,Sensor, and Visible‐Light‐Induced H2 Production

Herein, multifunctional N‐doped carbon nanodots (NCNDs) were prepared through the one‐step hydrothermal treatment of yeast. Results show that the NCNDs can be used as a new photocatalyst to drive the water‐splitting reaction under UV light. Moreover, the NCNDs can efficiently catalyze the hydrogen evolution reaction. Under visible‐light irradiation, Eosin Y‐sensitized NCNDs exhibit excellent activity for hydrogen evolution. The hydrogen evolution rate of NCNDs (without any modification and co‐catalyst) reaches 107.1 μmol h^?1 (2142 μmol g^?1 h^?1). When Pt is loaded on the NCNDs, the hydrogen evolution rate reaches 491.2 μmol h^?1 (9824 μmol g^?1 h^?1) under visible‐light irradiation. In addition, the NCNDs show excellent fluorescent properties and can be applied as a fluorescent probe for the sensitive and selective detection of Fe³⁺.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.     

Two-Dimensional Metal–Organic Framework Nanosheets with Cobalt-Porphyrins for High-Performance CO2 Electroreduction

The electrochemical reduction of CO₂ presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-Co^II] was precisely anchored onto water-stable 2D metal–organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO₂ reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768 h⁻¹ at −0.919 V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FE_CO) of 85.1 %, TOF of 5315 h⁻¹, and j_total of 6 mA cm⁻² at −0.769 V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.     

Photocatalyzed Hydrogen Evolution from Water by a Composite Catalyst of NH2‐MIL‐125(Ti) and Surface Nickel(II) Species

A composite of the metal–organic framework (MOF) NH₂‐MIL‐125(Ti) and molecular and ionic nickel(II) species, catalyzed hydrogen evolution from water under UV light. In 95 v/v % aqueous conditions the composite produced hydrogen in quantities two orders of magnitude higher than that of the virgin framework and an order of magnitude greater than that of the molecular catalyst. In a 2 v/v % water and acetonitrile mixture, the composite demonstrated a TOF of 28 mol H₂ g(Ni)^?1 h^?1 and remained active for up to 50 h, sustaining catalysis for three times longer and yielding 20‐fold the amount of hydrogen. Appraisal of physical mixtures of the MOF and each of the nickel species under identical photocatalytic conditions suggest that similar surface localized light sensitization and proton reduction processes operate in the composite catalyst. Both nickel species contribute to catalytic conversion, although different activation behaviors are observed.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe‐MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two‐electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs‐300 exhibits the highest activity for ORR with near‐zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high‐yield H₂O₂ production rate of 6.5 mol g_cat^?1 h^?1 has also been achieved by MOF NSs‐300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs‐300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.