DyF3: An Efficient Electrocatalyst for N2 Fixation to NH3 under Ambient Conditions

NH₃ synthesis by the Haber–Bosch method is regarded as the dominant method in industry. Such a process is energy‐intensive, accompanied by a large amount of CO₂ emission. Electrocatalytic N₂ reduction is a sustainable avenue for NH₃ production at ambient conditions. However, it needs a catalyst to boost the N₂ reduction reaction. Here, we demonstrate that DyF₃ is an efficient electrocatalyst. In 0.1 m Na₂SO₄, DyF₃ attains a large NH₃ yield of 10.9 μg h^?1 mg^?1_cat. at ?0.45 V vs. the reversible hydrogen electrode, with the corresponding Faradaic efficiency of 8.8 %. Furthermore, this catalyst exhibits high electrochemical stability.     

Ammonia Synthesis Under Ambient Conditions: Selective Electroreduction of Dinitrogen to Ammonia on Black Phosphorus Nanosheets

Constructing efficient catalysts for the N₂ reduction reaction (NRR) is a major challenge for artificial nitrogen fixation under ambient conditions. Herein, inspired by the principle of “like dissolves like”, it is demonstrated that a member of the nitrogen family, well‐exfoliated few‐layer black phosphorus nanosheets (FL‐BP NSs), can be used as an efficient nonmetallic catalyst for electrochemical nitrogen reduction. The catalyst can achieve a high ammonia yield of 31.37 μg h^?1 mg^?1_cat. under ambient conditions. Density functional theory calculations reveal that the active orbital and electrons of zigzag and diff‐zigzag type edges of FL‐BP NSs enable selective electrocatalysis of N₂ to NH₃ via an alternating hydrogenation pathway. This work proves the feasibility of using a nonmetallic simple substance as a nitrogen‐fixing catalyst and thus opening a new avenue towards the development of more efficient metal‐free catalysts.     

Greatly Improving Electrochemical N2 Reduction over TiO2 Nanoparticles by Iron Doping

Titanium‐based catalysts are needed to achieve electrocatalytic N₂ reduction to NH₃ with a large NH₃ yield and a high Faradaic efficiency (FE). One of the cheapest and most abundant metals on earth, iron, is an effective dopant for greatly improving the nitrogen reduction reaction (NRR) performance of TiO₂ nanoparticles in ambient N₂‐to‐NH₃ conversion. In 0.5 m LiClO₄, Fe‐doped TiO₂ catalyst attains a high FE of 25.6 % and a large NH₃ yield of 25.47 μg h^?1 mg_cat^?1 at ?0.40 V versus a reversible hydrogen electrode. This performance compares favorably to those of all previously reported titanium‐ and iron‐based NRR electrocatalysts in aqueous media. The catalytic mechanism is further probed with theoretical calculations.     

Highly Effective Ru/BaCeO3 Catalysts on Supports with Strong Basic Sites for Ammonia Synthesis

BaCeO₃‐a and BaCeO₃‐b, with strong basic sites, were synthesized by using a co‐precipitation method at different calcination temperatures, and used as supports to evaluate their performance in ammonia synthesis. The ammonia synthesis rate with the 1.25 % Ru/BaCeO₃‐a catalyst is 24 mmol g^?1 h^?1, which is higher than that of 1.25 % Ru/BaCeO₃‐b catalyst (18 mmol g^?1 h^?1) at 3 MPa and 450 °C. Moreover, the performance of the 4 % Cs‐1.25 % Ru/BaCeO₃‐a catalyst was further improved to 28 mmol g^?1 h^?1, and no sign of deactivation was observed after a reaction time of 120 h. The XPS and H₂ temperature‐programmed reduction analyses indicated that the Ru/BaCeO₃‐a catalyst has more oxygen vacancies than the Ru/BaCeO₃‐b catalyst. In addition, the average Ru particle size of the Ru/BaCeO₃‐a catalyst is closer to 2 nm than the Ru/BaCeO₃‐b catalyst, which promotes the generation of B₅‐type sites (the active site for N₂ dissociation). The CO₂ temperature‐programmed desorption analysis indicates that BaCeO₃‐a has a high basic density, which is beneficial for electron transfer to Ru and further facilitates the dissociation of N≡N bonds.     

Defect Engineering Metal‐Free Polymeric Carbon Nitride Electrocatalyst for Effective Nitrogen Fixation under Ambient Conditions

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing picture for the conversion of N₂ into NH₃. However, electrocatalytic NRR mainly relies on metal‐based catalysts, and it remains a grand challenge in enabling effective N₂ activation on metal‐free catalysts. Here we report a defect engineering strategy to realize effective NRR performance (NH₃ yield: 8.09 μg h^?1 mg^?1_cat., Faradaic efficiency: 11.59 %) on metal‐free polymeric carbon nitride (PCN) catalyst. Illustrated by density functional theory calculations, dinitrogen molecule can be chemisorbed on as‐engineered nitrogen vacancies of PCN through constructing a dinuclear end‐on bound structure for spatial electron transfer. Furthermore, the N?N bond length of adsorbed N₂ increases dramatically, which corresponds to “strong activation” system to reduce N₂ into NH₃. This work also highlights the significance of defect engineering for improving electrocatalysts with weak N₂ adsorption and activation ability.     

A Biomass-Derived Carbon-Based Electrocatalyst for Efficient N2 Fixation to NH3 under Ambient Conditions

Currently, NH₃ production primarily depends on the Haber–Bosch process, which operates at elevated temperatures and pressures and leads to serious CO₂ emissions. Electrocatalytic N₂ reduction offers an environmentally benign approach for the sustainable synthesis of NH₃ under ambient conditions. This work reports the development of biomass-derived amorphous oxygen-doped carbon nanosheet (O−CN) using tannin as the precursor. As a metal-free electrocatalyst for N₂-to-NH₃ conversion, such O−CN shows high catalytic performances, achieving a large NH₃ yield of 20.15 μg h⁻¹ mg⁻¹_cat. and a high Faradic efficiency of 4.97 % at −0.6 V vs. reversible hydrogen electrode (RHE) in 0.1 m HCl at ambient conditions. Remarkably, it also exhibits high electrochemical selectivity and durability.     

Reactive Ionic Liquid Enables the Construction of 3D Rh Particles with Nanowire Subunits for Electrocatalytic Nitrogen Reduction

Until now, the synthesis of Rh particles with unusual three‐dimensional (3D) nanostructures is still challenging. A 3D nanostructure enables fast ion/molecule transport and possesses plenty of exposed active surface, and therefore it is of great interest to construct 3D Rh particles catalysts for the N₂ reduction reaction (NRR). Herein, we proposed a reactive ionic liquid strategy for fabricating unusual 3D Rh particles with nanowires as the subunits. The ionic liquid n‐octylammonium formate simultaneously worked as reaction medium, reductant and template for the successful construction of 3D Rh particles. The as‐prepared 3D Rh particles demonstrated excellent activity for electrocatalytic N₂ fixation in 0.1 M KOH electrolyte under ambient conditions with a high NH₃ yield of 35.58 μg h^?1 mg_cat.^?1 at ?0.2 V versus reversible hydrogen electrode (RHE), surpassing most of the state‐of‐the‐art noble metal catalysts. Our reactive ionic liquid strategy thus holds great promise for the rational construction of high‐performance electrocatalysts toward NRR.     

ZIF‐Induced d‐Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d‐band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat^?1 h^?1 under ambient conditions. The strategy lowers electrocatalyst d‐band position to weaken H adsorption and concurrently creates electron‐deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44‐fold compared to without ZIF (ca. 1 %). The Pt/Au‐N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

NH₃ synthesis by the electrocatalytic N₂ reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method—the Haber–Bosch process—that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen‐doped porous carbon as a cost‐effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH₃ yield rate (34.0±3.6 μg h^?1 mg_cat.^?1) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non‐precious‐metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single‐atom non‐precious‐metal catalysts for the electrocatalytic NRR.     

Generating Defect‐Rich Bismuth for Enhancing the Rate of Nitrogen Electroreduction to Ammonia

The electrochemical N₂ fixation, which is far from practical application in aqueous solution under ambient conditions, is extremely challenging and requires a rational design of electrocatalytic centers. We observed that bismuth (Bi) might be a promising candidate for this task because of its weak binding with H adatoms, which increases the selectivity and production rate. Furthermore, we successfully synthesized defect‐rich Bi nanoplates as an efficient noble‐metal‐free N₂ reduction electrocatalyst via a low‐temperature plasma bombardment approach. When exclusively using ¹H NMR measurements with N₂ gas as a quantitative testing method, the defect‐rich Bi(110) nanoplates achieved a ¹⁵NH₃ production rate of 5.453 μg mg_Bi^?1 h^?1 and a Faradaic efficiency of 11.68 % at ?0.6 V vs. RHE in aqueous solution at ambient conditions.     

Crystal‐Phase‐Engineered PdCu Electrocatalyst for Enhanced Ammonia Synthesis

Crystal phase engineering is a powerful strategy for regulating the performance of electrocatalysts towards many electrocatalytic reactions, while its impact on the nitrogen electroreduction has been largely unexplored. Herein, we demonstrate that structurally ordered body‐centered cubic (BCC) PdCu nanoparticles can be adopted as active, selective, and stable electrocatalysts for ammonia synthesis. Specifically, the BCC PdCu exhibits excellent activity with a high NH₃ yield of 35.7 μg h^?1 mg^?1_cat, Faradaic efficiency of 11.5 %, and high selectivity (no N₂H₄ is detected) at ?0.1 V versus reversible hydrogen electrode, outperforming its counterpart, face‐centered cubic (FCC) PdCu, and most reported nitrogen reduction reaction (NRR) electrocatalysts. It also exhibits durable stability for consecutive electrolysis for five cycles. Density functional theory calculation reveals that strong orbital interactions between Pd and neighboring Cu sites in BCC PdCu obtained by structure engineering induces an evident correlation effect for boosting up the Pd 4d electronic activities for efficient NRR catalysis. Our findings open up a new avenue for designing active and stable electrocatalysts towards NRR.     

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

Ammonia, a key precursor for fertilizer production, convenient hydrogen carrier, and emerging clean fuel, plays a pivotal role in sustaining life on Earth. Currently, the main route for NH₃ synthesis is by the heterogeneous catalytic Haber–Bosch process (N₂+3 H₂→2 NH₃), which proceeds under extreme conditions of temperature and pressure with a very large carbon footprint. Herein we report that a pristine nitrogen‐doped nanoporous graphitic carbon membrane (NCM) can electrochemically convert N₂ into NH₃ in an acidic aqueous solution under ambient conditions. The Faradaic efficiency and rate of production of NH₃ on the NCM electrode reach 5.2 % and 0.08 g m^?2 h^?1, respectively. Functionalization of the NCM with Au nanoparticles dramatically enhances these performance metrics to 22 % and 0.36 g m^?2 h^?1, respectively. As this system offers the potential to be scaled to industrial levels it is highly likely that it might displace the century‐old Haber–Bosch process.     

Single atom accelerates ammonia photosynthesis

Atomically dispersed metal has gained much attention because of the new opportunities they offer in catalysis. However, it is still crucial to understand the mechanism of single-atom catalysis at molecular level for expanding them to other more difficult catalytic reactions, such as ammonia synthesis from nitrogen. In fact, developing ammonia synthesis under ambient conditions to overcome the high energy consumption in well-established Haber-Bosch process has fascinated scientists for many years.Herein, we demonstrate that single Cu atom yields facile valence-electron isolation from the conjugated π electron cloud of p-CN. Electron spin resonance measurements reveal that these isolated valence electrons can be easily excited to generate free electrons under photo-illumination, thus inducing high efficient photo-induced ammonia synthesis under ambient conditions.The NH_3 producing rate of copper modified carbon nitride(Cu-CN) reached 186 μmol g~(-1) h~(-1) under visible light irradiation with the quantum efficiency achieved 1.01% at 420 nm monochromatic light. This finding surely offers a model to open up a new vista for the ammonia synthesis at gentle conditions. The introduction of single atom to isolate the valence electron also represents a new paradigm for many other photocatalytic reactions, since the most photoinduced processes have been successfully exploited sharing the same origin.     

Air‐Stable (CAAC)CuCl and (CAAC)CuBH4 Complexes as Catalysts for the Hydrolytic Dehydrogenation of BH3NH3

The first stable copper borohydride complex [(CAAC)CuBH₄] [CAAC=cyclic(alkyl)(amino)carbene] bearing a single monodentate ligand was prepared by addition of NaBH₄ or BH₃NH₃ to the corresponding [(CAAC)CuCl] complex. Both complexes are air‐stable and promote the catalytic hydrolytic dehydrogenation of ammonia borane. The amount of hydrogen released reaches 2.8 H₂/BH₃NH₃ with a turnover frequency of 8400 mol mol_cat^?1 h^?1 at 25 °C. In a fifteen‐cycle experiment, the catalyst was reused without any loss of efficiency.     

Analogues of Cis‐ and Transplatin with a Rich Solution Chemistry: cis‐[PtCl2(NH3)(1‐MeC‐N3)] and trans‐[PtI2(NH3)(1‐MeC‐N3)]

Mono(nucleobase) complexes of the general composition cis‐[PtCl₂(NH₃)L] with L=1‐methylcytosine, 1‐MeC ( 1 a ) and L=1‐ethyl‐5‐methylcytosine, as well as trans‐[PtX₂(NH₃)(1‐MeC)] with X=I ( 5 a ) and X=Br ( 5 b ) have been isolated and were characterized by X‐ray crystallography. The Pt coordination occurs through the N3 atom of the cytosine in all cases. The diaqua complexes of compounds 1 a and 5 a , cis‐[Pt(H₂O)₂(NH₃)(1‐MeC)]²⁺ and trans‐[Pt(H₂O)₂(NH₃)(1‐MeC)]²⁺, display a rich chemistry in aqueous solution, which is dominated by extensive condensation reactions leading to μ‐OH‐ and μ‐(1‐MeC^?‐N3,N4)‐bridged species and ready oxidation of Pt to mixed‐valence state complexes as well as diplatinum(III) compounds, one of which was characterized by X‐ray crystallography: h,t‐[{Pt(NH₃)₂(OH)(1‐MeC^?‐N3,N4)}₂](NO₃)₂ ? 2 [NH₄](NO₃) ? 2 H₂O. A combination of ¹H NMR spectroscopy and ESI mass spectrometry was applied to identify some of the various species present in solution and the gas phase, respectively. As it turned out, mass spectrometry did not permit an unambiguous assignment of the structures of +1 cations due to the possibilities of realizing multiple bridging patterns in isomeric species, the occurrence of different tautomers, and uncertainties regarding the Pt oxidation states. Additionally, compound 1 a was found to have selective and moderate antiproliferative activity for a human cervix cancer line (SISO) compared to six other human cancer cell lines.     

Amino‐Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g‐C3N4 for Enhanced Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome. To circumvent these obstacles, we anchored CsPbBr₃ QDs (CPB) on NH_x‐rich porous g‐C₃N₄ nanosheets (PCN) to construct the composite photocatalysts via N?Br chemical bonding. The 20 CPB‐PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h^?1 g^?1 in acetonitrile/water for photocatalytic reduction of CO₂ to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr₃ QDs. This study opens up new possibilities of using halide perovskite QDs for photocatalytic application.     

Copper‐based Metal‐organic Framework Applied in the Development of an Electrochemical Biomimetic Sensor for Catechol Determination

In this study, the synthesis and characterization of a Cu‐based metal‐organic framework (MOF) [Cu₃(BTC)₂(H₂O)₃]_n (where BTC=benzene‐1,3,5‐tricarboxylate), known as HKUST‐1, were performed. The Cu‐MOF was applied in the modification of a carbon paste to obtain a biomimetic sensor for the electrochemical determination of catechol. Kinetic assays confirmed that the Cu‐MOF acts as a catalyst for the oxidation of catechol and it can be considered as a catechol oxidase mimetic. Under optimized conditions, the calibration curve for catechol presented a linear range of 8.0×10⁻⁷ to 3.2×10⁻⁵ mol L⁻¹, with detection limit of=1.0×10⁻⁷ mol L⁻¹. The sensor demonstrated good intra‐day repeatability and inter‐electrode reproducibility (relative standard deviations of 3.8 % (n=10) and 4.3 % (n=6), respectively). In the selectivity study, an adequate peak‐to‐peak separation was observed for hydroquinone and uric acid in relation to catechol, demonstrating that this sensor has the potential for use in the simultaneous determination of these compounds. This sensor was successfully applied in the determination of catechol in water samples.     

A Janus Fe‐SnO2 Catalyst that Enables Bifunctional Electrochemical Nitrogen Fixation

Electrochemical N₂ reduction reactions (NRR) and the N₂ oxidation reaction (NOR), using H₂O and N₂, are a sustainable approach to N₂ fixation. To date, owing to the chemical inertness of nitrogen, emerging electrocatalysts for the electrochemical NRR and NOR at room temperature and atmospheric pressure remain largely underexplored. Herein, a new‐type Fe‐SnO₂ was designed as a Janus electrocatalyst for achieving highly efficient NRR and NOR catalysis. A high NH₃ yield of 82.7 μg h^?1 mg_cat.^?1 and a Faraday efficiency (FE) of 20.4 % were obtained for NRR. This catalyst can also serve as an excellent NOR electrocatalyst with a NO₃^? yields of 42.9 μg h^?1 mg_cat.^?1 and a FE of 0.84 %. By means of experiments and DFT calculations, it is revealed that the oxygen vacancy‐anchored single‐atom Fe can effectively adsorb and activate chemical inert N₂ molecules, lowering the energy barrier for the vital breakage of N≡N and resulting in the enhanced N₂ fixation performance.     

Tuning the Electron Localization of Gold Enables the Control of Nitrogen‐to‐Ammonia Fixation

The (photo)electrochemical N₂ reduction reaction (NRR) provides a favorable avenue for the production of NH₃ using renewable energy in mild operating conditions. Understanding and building an efficient catalyst with high NH₃ selectivity represents an area of intense interest for the early stages of development for NRR. Herein, we introduce a CoO_x layer to tune the local electronic structure of Au nanoparticles with positive valence sites for boosting conversion of N₂ to NH₃. The catalysts, possessing high average oxidation states (ca. 40 %), achieve a high NH₃ yield rate of 15.1 μg cm^?2 h^?1 and a good faradic efficiency of 19 % at ?0.5 V versus reversible hydrogen electrode. Experimental results and simulations reveal that the ability to tune the oxidation state of Au enables the control of N₂ adsorption and the concomitant energy barrier of NRR. Altering the Au oxidation state provides a unique strategy for control of NRR in the production of valuable NH₃.