Cobalt-doped BiVO<Subscript>4</Subscript> (Co-BiVO<Subscript>4</Subscript>) as a visible-light-driven photocatalyst for the degradation of malachite green and inactivation of harmful microorganisms in wastewater

Co-doped BiVO₄, a visible-light-responsive photocatalytic semiconductor, was synthesized using a microwave hydrothermal method. The doped sample exhibited much higher photocatalytic activity for malachite green degradation under visible light irradiation than undoped BiVO₄. Similarly, improved inactivation efficiency toward Escherichia coli and Chlamydomonas pulsatilla (green tide) were observed with Co-doped BiVO₄. The degradation of malachite green by Co-doped BiVO₄ reaches 99% within 90 min irradiation to visible light. Similarly, the inactivation of Escherichia coli reaches 81.3% in 5 h and Chlamydomonas pulsatilla reaches 65.6% in 1 h irradiation to visible light. The enhanced photoactivity is believed to be due to the increment of the visible light absorption range by narrowing the band gap energy. In addition, the highly exposed reactive (010) facets can efficiently capture the photoinduced electrons, promote charge separation, and reduce recombination probability. Thus, these findings provide mechanistic insight into the effectiveness of Co-doped BiVO₄ semiconductors for the treatment of wastewater that contains industrial effluents and microorganisms.     

Photocatalysis enhancement of CaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Nd<Superscript>3+</Superscript>@TiO<Subscript>2</Subscript> composite powders

CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were synthesized by a sol–gel method under mild conditions (i.e. low temperature and ambient pressure). The as-prepared powders were characterized by transmission electron microscopy (TEM) and analyzed by X-ray diffraction (XRD). The photocatalytic behavior of the TiO₂-base surfaces was evaluated by the degradation of nitrogen monoxide gas. It suggested that CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were composed of anatase titania and that CaAl₂O₄:Eu²⁺, Nd³⁺. TiO₂ particles were deposited on the surface of CaAl₂O₄:Eu²⁺, Nd³⁺ to form uniform film. CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders exhibited higher photocatalytic activity compared with pure TiO₂ under visible light. And the result also clearly indicated that the long afterglow phosphor absorbed and stored lights for the TiO₂ to remain photocatalytic activity in the dark.     

Preparation of novel visible-light-driven In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaIn<Subscript>2</Subscript>O<Subscript>4</Subscript> composite photocatalyst by sol–gel method

Novel visible-light-activated In₂O₃–CaIn₂O₄ photocatalysts were developed in this paper through a sol–gel method. The photocatalytic activities of In₂O₃–CaIn₂O₄ composite photocatalysts were investigated based on the decomposition of methyl orange under visible light irradiation (λ > 400 nm). The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and UV–vis diffused reflectance spectroscopy (DRS). The results revealed that the In₂O₃–CaIn₂O₄ composite samples with different In₂O₃ and CaIn₂O₄ content can be obtained by controlling the synthesis temperature, and the composite photocatalysts extended the light absorption spectrum toward the visible region. The photocatalytic tests indicated that the composite samples demonstrated high visible-light activity for decomposition of methyl orange. The significant enhancement in the In₂O₃–CaIn₂O₄ photo-activity under visible light irradiation can be ascribed to the efficient separation of photo-generated carriers in the In₂O₃ and CaIn₂O₄ coupling semiconductors.     

Synthesis of Fe<Superscript>3+</Superscript> doped ordered mesoporous TiO<Subscript>2</Subscript> with enhanced visible light photocatalytic activity and highly crystallized anatase wall

Fe³⁺ doped mesoporous TiO₂ with ordered mesoporous structure were successfully prepared by the solvent evaporation-induced self-assembly process using P123 as soft template. The properties and structure of Fe³⁺ doped mesoporous TiO₂ were characterized by means of XRD, EPR, BET, TEM, and UV–vis absorption spectra. The characteristic results clearly show that the amount of Fe³⁺ dopant affects the mesoporous structure as well as the visible light absorption of the catalysts. The photocatalytic activity of the prepared mesoporous TiO₂ was evaluated from an analysis of the photodegradation of methyl orange under visible light irradiation. The results indicate that the sample of 0.50%Fe–MTiO₂ exhibits the highest visible light photocatalytic activity compared with other catalysts.     

Synthesis,characterisation and photocatalytic activity of Ag<Superscript>+</Superscript>- and Sn<Superscript>2+</Superscript>-substituted KSbTeO<Subscript>6</Subscript>

Ag⁺- and Sn²⁺-substituted KSbTeO₆ were prepared by a facile ion-exchange method at ambient temperature. All the samples were characterised by scanning electron microscopy, energy-dispersive spectra, thermogravimetric analysis, powder X-ray diffraction, Raman spectra and UV-VIS diffuse reflectance spectra. Both Sn²⁺- and Ag⁺-substituted KSbTeO₆ were crystallised in a cubic lattice with the \(Fd\bar 3m\) space group. The band-gap energy of all the samples was deduced from their UV-VIS diffuse reflectance spectral profiles. The visible light-induced photocatalytic oxidation of the methylene blue (MB) dye was examined in the presence of all the as-prepared materials. The Ag⁺- and Sn²⁺-substituted KSbTeO₆ exhibited a higher photocatalytic activity than the parent KSbTeO₆ in degradation of the MB dye under visible light irradiation.     

Synthesis,characterization, and photocatalytic properties of La<Superscript>3+</Superscript>-doped BiPO<Subscript>4</Subscript> photocatalysts

La³⁺-doped BiPO₄ photocatalysts were prepared via a hydrothermal process. Their morphologies, structures, and light absorption properties were evaluated. A small amount of La-doping (optimized at 2 mol %) could significantly improve the activity of BiPO₄ in the degradation of methylene blue under ultraviolet irradiation. After five recycles, the La³⁺-doped BiPO₄ did not exhibit any apparent loss in activity, confirming its stability despite recycling.     

Advanced Bi<Subscript>2</Subscript>O<Subscript>2.7</Subscript>/Bi<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript> composite film with enhanced visible-light-driven activity for the degradation of organic dyes

Bi₂O_2.7/Bi₂Ti₂O₇ composite photocatalyst films are synthesized by sol–gel dip-coating. The ratio of adding Bi and Ti precursors can be controlled during the preparation process. The phase structure is confirmed by X-ray diffraction. The UV–visible diffuse reflectance spectrum shows that the composite catalysts present light absorption in the visible region. The obtained Bi₂O_2.7/Bi₂Ti₂O₇ composite films possess superior photocatalytic degradation of rhodamine B, owing to the visible light response of Bi₂O_2.7 and the separation of photogenerated electrons and holes between the two components. As a result, the Bi₂O_2.7/Bi₂Ti₂O₇ (Bi/Ti = 1:1) displays the highest photocatalytic activity under visible light or UV light irradiation for the degradation of different organic dyes, including methyl blue, methyl orange and acid orange 7.     

Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

Photocatalytic degradation of organic dyes by Er<Superscript>3+</Superscript>: YAlO<Subscript>3</Subscript>/Co- and Fe-doped ZnO coated composites under solar irradiation

In this work, the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites were prepared by the sol-gel method. Then, they were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). Photo-degradation of azo fuchsine (AF) as a model dye under solar light irradiation was studied to evaluate the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites. It was found that the photocatalytic activity of Co- and Fe-doped ZnO composites can be obviously enhanced by upconversion luminescence agent (Er³⁺: YAlO₃). Besides, the photocatalytic activity of Er³⁺: YAlO₃/Fe-doped ZnO is better than that of Er³⁺: YAlO₃/Co-doped ZnO. The influence of experiment conditions, such as the concentration of Er³⁺: YAlO₃, heat-treatment temperature and time on the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites was studied. In addition, the effects of solar light irradiation time, dye initial concentration, Er³⁺: YAlO₃/Co- and Fe-doped ZnO amount on the photocatalytic degradation of azo fuchsine in aqueous solution were investigated in detail. Simultaneously, some other organic dyes, such as Methyl Orange (MO), Rhodamine B (RM-B), Acid Red B (AR-B), Congo Red (CR), and Methyl Blue (MB) were also studied. The possible excitation principle of Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites under solar light irradiation and the photocatalytic degradation mechanism of organic dyes were discussed.     

Novel Visible-Light-Driven Photocatalyst Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/FeWO<Subscript>4</Subscript> for Efficient Decomposition of Organic Pollutants

A highly efficient and visible light (λ ≥ 420 nm) responsive composite photocatalyst, Co₃O₄/FeWO₄ was prepared by simple impregnation method. The heterojunction semiconductors Co₃O₄/FeWO₄ demonstrated notably high photocatalytic activity over a wide range of composition than the individual component Co₃O₄ or FeWO₄ for the complete degradation of 1,4-dichlorobenzene (DCB) in aqueous phase under visible light irradiation. The photocatalytic activity of composite was optimized at 1/99 Co₃O₄/FeWO₄ composition. After 2 h of visible light irradiation 51% decomposition of 1,4-dichlorobenzene (DCB) was observed utilizing 1/99 Co₃O₄/FeWO₄ photocatalyst while the end members demonstrated a negligible degradation under the same experimental condition. The valence band (VB) and conduction band (CB) of Co₃O₄ is located above the VB and CB of FeWO₄, respectively. Both the semiconductors Co₃O₄ and FeWO₄ exhibit strong absorption over the wide range of visible light. The obviously enhanced photocatalytic performance of Co₃O₄/FeWO₄ composite has been discussed on the hole (h⁺) as well as electron (e^?) transfer mechanism between the VB and CB of individual semiconductors.     

Eu<Superscript>3+</Superscript>-doped LaPO<Subscript>4</Subscript> and LaAlO<Subscript>3</Subscript> nanosystems and their luminescence properties

Eu³⁺ ion-doped LaPO₄ nanowires or nanorods have been successfully synthesized by a simple hydrothermal method. The influence of varying the hydrothermal and subsequent sintering conditions on the morphology and structure of the LaPO₄ host has been investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). For comparison, the Eu³⁺ ions were also doped into monoclinic monazite LaPO₄ nanoparticles and perovskite LaAlO₃ nanoparticles. The relative intensities of the emission lines of the LaPO₄:Eu³⁺ nanosystems were essentially independent of their shape. The optimal doping concentrations in the monoclinic LaPO₄ and perovskite LaAlO₃ nanosystems were determined to be about 5.0 and 3.5 mol%, respectively. Under appropriate UV-radiation, the red light emitted from LaAlO₃:Eu³⁺ (3.5 mol%) was brighter than that from LaPO₄:Eu³⁺ (5.0 mol%) nanomaterial, resulting from differences in their spin-orbit couplings and covalence, which indicates that the nanoscale LaAlO₃ is a promising host material for rare earth ions. Electronic Supplementary Material  Supplementary material is available for this article at and is accessible for authorized users. Supported by the National Natural Science Foundation of China (Grant Nos. 20873039 & 90606001), Hunan Provincial Natural Science Foundation (No. 07jj4002), and the Students Innovation Training Fund of Hunan University     

N,B, Si-tridoped mesoporous TiO<Subscript>2</Subscript> with high surface area and excellent visible-light photocatalytic activity

N, B, Si-tridoped mesoporous TiO₂, together with N-doped, N, B-codoped and N, Si-codoped TiO₂, was prepared by a modified sol–gel method. The samples were characterized by wide-angle X-ray diffraction (WAXRD), N₂ adsorption–desorption, transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, UV–visible adsorbance spectra (UV–vis) and X-ray photoelectron spectra (XPS). The N, B, Si-tridoped mesoporous TiO₂ showed small crystallite size, large specific surface area (350 m²/g), uniform pore distribution (3.2 nm) and strong absorption in the visible light region. The photocatalytic activities of the samples were evaluated by the photodegradation of 2,4-dichlorophenol (2,4-DCP) aqueous solution. The N, B, Si-tridoping sample exhibited much higher photocatalytic activity compared with other synthesized photocatalysts. The high activity could be attributed to the strong absorption in the visible light region, large specific surface area, small crystallite size, large amount of surface hydroxyl groups, and mesoporosity.     

Photocatalytic degradation of organic compounds in aqueous systems by Fe and Ho codoped TiO<Subscript>2</Subscript>

Undoped, single-doped, and codoped TiO₂ nanoparticles were prepared by the sol-gel method and characterized with X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET)-specific surface area (S_BET), UV-Vis absorption spectra (UV-Vis), and X-ray photoelectron spectroscopy (XPS). Their photocatalytic activity was evaluated by methyl orange (MO) degradation in an aqueous suspension under UV or simulated solar light illumination. XRD showed that all samples calcined at 600°C preserved the anatase structure, and doping inhibited the increase of crystallite size. The BET result revealed that doping improved the surface area of TiO₂. UV-Vis indicated that Fe³⁺-doping broadened the absorption profile of TiO₂. XPS demonstrated that doping was advantageous to absorb more surface hydroxyl groups or chemisorbed water molecules. Photocatalytic degradation showed that the photocatalytic activity of TiO₂ codoped with Fe³⁺ and Ho³⁺ ions was markedly improved. This was ascribed to the fact that there was a cooperative action in the two doped elements. Fe³⁺-doping broadens the absorption profile, improves photo utilization of TiO₂, and then generates more electronhole pairs. Ho³⁺-doping restrains the increase in grain size and retards the recombination of photo-generated electrons and holes.     

Preparation,characterization and enhanced photocatalytic activity of Ni<Superscript>2+</Superscript> doped titania under solar light

Anatase TiO₂ was prepared by sol-gel method through the hydrolysis of TiCl₄. Ni²⁺ was doped into the TiO₂ matrix in the concentration range of 0.02 to 0.1 at.% and characterized by various analytical techniques. Powder X-ray diffraction revealed only anatase phase for all the samples, while diffuse reflectance spectral studies indicated a red shift in the band gap absorption to the visible region. The photocatalytic activities of these photocatalysts were probed for the degradation of methyl orange under natural solar light. The photocatalyst with optimum doping of 0.08 at.% Ni²⁺, showed enhanced activity, which is attributed to: (i) effective separation of charge carriers and (ii) large red shift in the band gap to visible region. The influence of crystallite size and dopant concentration on the charge carrier trapping — recombination dynamics is investigated.     

Preparation of nanocrystalline Fe-doped TiO<Subscript>2</Subscript> powders as a visible-light-responsive photocatalyst

Nanocrystalline Fe-doped TiO₂ powders were prepared using TiOSO₄, urea, and Fe(NO₃)₃ · 9H₂O as precursors through a hydrothermal method. The as-synthesized yellowish-colored powders are composed of anatase TiO₂, identified by X-ray diffraction (XRD). The grain size ranged from 9.7 to 12.1 nm, calculated by Scherrer’s method. The specific surface area ranged from 141 to 170 m²/g, obtained by the Brunauer–Emmett–Teller (BET) method. The transmission electron microscopy (TEM) micrograph of the sample shows that the diameter of the grains is uniformly distributed at about 10 nm, which is consistent with that calculated by Scherrer’s method. Fe³⁺ and Fe²⁺ have been detected on the surface of TiO₂ powders by X-ray photoelectron spectroscopy (XPS). The UV–Vis diffuse reflection spectra indicate that the light absorption thresholds of the Fe-doped TiO₂ powders have been red-shifted into the visible light region. The photocatalytic activity of the Fe-doped TiO₂ was evaluated through the degradation of methylene blue (MB) under visible light irradiation. The Fe-doped TiO₂ powders have shown good visible-light photocatalytic activities and the maximum degradation ratio is achieved within 4.5 h.     

Dip-coating deposition of resistive BiVO<Subscript>4</Subscript> thin film and evaluation of their photoelectrochemical parameters under distinct sources illumination

Resistive monoclinic bismuth vanadate (BiVO₄) nanocrystals in the form of thin films were obtained by the solution combustion synthesis coupled with the dip-coating deposition process. The structure, morphology, and optical properties of BiVO₄ nanocrystals were characterized by means of x-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis spectroscopy. The photoelectrochemical properties were obtained by cyclic voltammetry and chronoamperometry techniques in potassium chloride (KCl) electrolyte solution under distinct visible light sources irradiation condition. Under blue InGaN light emitting diode (LED) irradiation, the electrode has a better efficiency, faster response time (260 ms), and faster decay time (65 ms), when compared with the irradiation by dichroic lamp. Besides, the photocurrent density (j _ph) is approximately 39 times higher than j _ph obtained under dichroic lamp. The performance analysis based on the methylene blue degradation reaction has shown that the BiVO₄ material has higher electroactivity under InGaN LED irradiation condition, with estimated k _obs value of 200 × 10^?4 min^?1, which is a little higher than the value obtained with dichroic lamp illumination. In the dark condition, the BiVO₄ presented much lower photocatalytic activity.     

Structural characterization and photocatalytic properties of novel Bi<Subscript>2</Subscript>FeVO<Subscript>7</Subscript>

Bi₂FeVO₇ was prepared by a solid-state reaction technique for the first time and the structural and photocatalytic properties of Bi₂FeVO₇ were studied. The results shows that this compound crystallized in the tetragonal crystal system with space group I4/mmm. Moreover, the band gap of Bi₂FeVO₇ was estimated to be about 2.22(6) eV. For the photocatalytic water splitting reaction, H₂ or O₂ evolution was observed from pure water with Bi₂FeVO₇ as the photocatalyst by ultraviolet light irradiation. Degradation of aqueous methylene blue (MB) dye by photocatalytic way over this compound was further studied under visible light irradiation. Bi₂FeVO₇ shows higher catalytic activity compared to TiO₂ (P-25) for MB photocatalytic degradation under visible light irradiation. Complete removal of aqueous MB was realized after visible light irradiation for 170 min with Bi₂FeVO₇ as the photocatalyst. The reduction of the total organic carbon (TOC) and the formation of inorganic products, SO ₄ ²⁻ and NO ₃ ⁻ revealed the continuous mineralization of aqueous MB during the photocatalytic course.     

Photocatalytic intercalated material based on HLaNb<Subscript>2</Subscript>O<Subscript>7</Subscript> as host and Cd<Subscript>0.8</Subscript>Zn<Subscript>0.2</Subscript>S as guest

A novel photocatalytic material (Pt,Cd0.8Zn0.2S)/HLaNb2O7 was fabricated by successive intercalation and exchange reactions. The (Pt,Cd0.8Zn0.2S)/HLaNb2O7 possessed a gallery height less than 0.5 nm and showed a broad absorption with wavelength over 370-500 nm. Using (Pt,Cd0.8Zn0.2S)/HLaNb2O7 as catalyst, the photocatalytic H2 evolution was more than 160 cm3·h-1·g-1 in the presence of Na2S as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. Furthermore, the catalyst showed photocatalytic activity even under visible light irradiation.     

Optical,magnetic and photocatalytic properties of magnetically separable Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-doped ZnO and pristine ZnO nanospheres

This work focussed on the optical, magnetic and photocatalytic properties of sol–gel-synthesized Fe₃O₄-doped ZnO nanospheres and was compared with pristine ZnO nanospheres. The crystalline phase of Fe₃O₄-doped ZnO nanospheres was studied with X-ray diffraction analysis and was well matched with standard pattern. Surface morphology was studied with HR-SEM images and EDAX spectrum. Furthermore, elemental mapping analysis was carried out to confirm the presence of Fe₃O₄ phase in Fe₃O₄-doped ZnO nanospheres. FT-Raman spectral studies show that a strong intense peak at 670 cm^?1 indicates the presence of Fe₃O₄ in Fe₃O₄-doped ZnO nanospheres. The mean crystallite size of Fe₃O₄-doped ZnO nanospheres was 34 nm as calculated by Debye–Scherrer’s formula which confirmed with HR-TEM image. The SAED pattern shows the presence of (100), (101), (102) and (202) of ZnO phase and (400) of Fe₃O₄ phase, confirming the crystalline nature of Fe₃O₄-doped ZnO nanospheres. The vibrating sample magnetometer (VSM) result shows that Fe₃O₄-doped ZnO nanospheres possess superparamagnetic nature and the composite nanospheres are magnetically separable. The optical properties have been studied by diffuse reflectance spectroscopy and time-resolved photoluminescence spectra. Implantation of Fe₃O₄ in ZnO nanospheres modifies the UV absorption edge, and it displays near-band gap emission and deep-level emission. The photocatalytic activity of Fe₃O₄-doped ZnO nanospheres studied against rhodamine B dye is found higher than that of pristine ZnO nanospheres which shows that Fe₃O₄-doped ZnO nanospheres are a promising photocatalyst.     

Preparation of ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by mechanical alloying and annealing for sensitizing C-modified TiO<Subscript>2</Subscript> and acquirement of efficient photocatalyst

ZnFe₂O₄ nanoparticles sensitized by C-modified TiO₂ hybrids (ZnFe₂O₄–TiO₂/C) were successfully prepared by a feasible method. The ZnFe₂O₄ nanoparticles were prepared by mechanical alloying and annealing. The residual organic compounds in the synthetic process of TiO₂ were selected as the carbon source. The as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, X-ray fluorescence, transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet–visible light diffuse reflectance spectroscopy (UV–Vis) and N₂ adsorption–desorption analysis. The photocatalytic activity of the photocatalysts was measured by degradation of methyl orange under ultraviolet (UV) light and simulated solar irradiation, respectively. The results show that the carbon did not enter the TiO₂ lattice but adhered to the surface of TiO₂. The photocatalytic activity of the as-prepared C-modified TiO₂ (TiO₂/C) improved both under UV and simulated solar light irradiation, but the improvement was not dramatic. Introduction of ZnFe₂O₄ into the TiO₂/C could enhance the absorption spectrum range. The ZnFe₂O₄–TiO₂/C hybrids exhibited a higher photocatalytic activity both than that of the pure TiO₂ and TiO₂/C under either UV or simulated solar light irradiation. The complex synergistic effect plays an important role in improving the photocatalytic performance of ZnFe₂O₄–TiO₂/C composites. The optimum photocatalytic performance was obtained from the ZnFe₂O₄(0.8 wt%)–TiO₂/C sample.