C78 cage isomerism defined by trimetallic nitride cluster size: a computational and vibrational spectroscopic study

Molecular structures of Dy(3)N@C(78) and Tm(3)N@C(78) clusterfullerenes are addressed by the IR and Raman vibrational spectroscopic studies and density functional theory (DFT) computations. First, extensive semiempirical calculations of 2927 isomers of C(78) hexaanions followed by DFT optimization were applied to establish their relative stability. Then, DFT calculations of a series of M(3)N@C(78) (M = Sc, Y, Lu, La) isomers were performed which have shown that the stability order of the isomers depends on the cluster size. While the Sc(3)N cluster is planar in the earlier reported Sc(3)N@C(78) (D(3)h: 24,109) clusterfullerenes, relatively large Y(3)N and Lu(3)N clusters would be forced to be pyramidal inside this cage, which would result in their destabilization. Instead, these clusters remain planar in the nonisolated pentagon rule (non-IPR) C(2): 22,010 isomer making Y(3)N@C(78) and Lu(3)N@C(78) clusterfullerenes with this cage structure the most stable ones. Finally, on the basis of a detailed analysis of their IR and Raman spectra supplemented with DFT vibrational calculations, the recently isolated Tm(3)N@C(78) and the major isomer of Dy(3)N@C(78) are assigned to the non-IPR C(2): 22,010 cage structure. A detailed assignment of their experimental and computed IR and Raman spectra is provided to support this conclusion and to exclude other cage isomers.     

Structure, stability, and cluster-cage interactions in nitride clusterfullerenes M3N@C2n (M = Sc, Y; 2n = 68-98): a density functional theory study

Extensive semiempirical calculations of the hexaanions of IPR (isolated pentagon rule) and non-IPR isomers of C(68)-C(88) and IPR isomers of C(90)-C(98) followed by DFT calculations of the lowest energy structures were performed to find the carbon cages that can provide the most stable isomers of M(3)N@C(2n) clusterfullerenes (M = Sc, Y) with Y as a model for rare earth ions. DFT calculations of isomers of M(3)N@C(2n) (M = Sc, Y; 2n = 68-98) based on the most stable C(2n)(6-) cages were also performed. The lowest energy isomers found by this methodology for Sc(3)N@C(68), Sc(3)N@C(78), Sc(3)N@C(80), Y(3)N@C(78), Y(3)N@C(80), Y(3)N@C(84), Y(3)N@C(86), and Y(3)N@C(88) are those that have been shown to exist by single-crystal X-ray studies as Sc(3)N@C(2n) (2n = 68, 78, 80), Dy(3)N@C(80), and Tb(3)N@C(2n) (2n = 80, 84, 86, 88) clusterfullerenes. Reassignment of the carbon cage of Sc(2)@C(76) to the non-IPR Cs: 17490 isomer is also proposed. The stability of nitride clusterfullerenes was found to correlate well with the stability of the empty 6-fold charged cages. However, the dimensions of the cage in terms of its ability to encapsulate M(3)N clusters were also found to be an important factor, especially for the medium size cages and the large Y(3)N cluster. In some cases the most stable structures are based on the different cage isomers for Sc(3)N and Y(3)N clusters. Up to the cage size of C(84), non-IPR isomers of C(2n)(6-) and M(3)N@C(2n) were found to compete with or to be even more stable than IPR isomers. However, the number of adjacent pentagon pairs in the most stable non-IPR isomers decreases as cage size increases: the most stable M(3)N@C(2n) isomers have three such pairs for 2n = 68-72, two pairs for n = 74-80, and only one pair for n = 82, 84. For C(86) and C(88) the lowest energy IPR isomers are much more stable than any non-IPR isomer. The trends in the stability of the fullerene isomers and the cluster-cage binding energies are discussed, and general rules for stability of clusterfullerenes are established. Finally, the high yield of M(3)N@C(80) (Ih) clusterfullerenes for any metal is explained by the exceptional stability of the C(80)(6-) (Ih: 31924) cage, rationalized by the optimum distribution of the pentagons leading to the minimization of the steric strain, and structural similarities of C(80) (Ih: 31924) with the lowest energy non-IPR isomers of C(760(6-), C(78)(6-), C(82)(6-), and C(84)(6-) pointed out.     

A large family of dysprosium-based trimetallic nitride endohedral fullerenes: Dy3N@C2n (39 </= n </= 44)

Dysprosium-based trimetallic nitride endohedral fullerenes (clusterfullerenes)-the Dy(3)N@C(2)(n) (38 相似文献   

Charge-induced reversible rearrangement of endohedral fullerenes: electrochemistry of tridysprosium nitride clusterfullerenes Dy3N@C2n (2n=78, 80)

The electrochemistry of three new clusterfullerenes Dy3N@C2n (2n=78, 80), namely two isomers of Dy3N@C80 (I and II) as well as Dy3N@C78 (II), have been studied systematically including their redox-reaction mechanism. The cyclic voltammogram of Dy3N@C80 (I) (Ih) exhibits two electrochemically irreversible but chemically reversible reduction steps and one reversible oxidation step. Such a redox pattern is quite different from that of Sc3N@C80 (I), and this can be understood by considering the difference in the charge transfer from the encaged cluster to the cage. A double-square reaction scheme is proposed to explain the observed redox-reaction behavior, which involves the charge-induced reversible rearrangement of the Dy3N@C80 (I) monoanion. The first oxidation potential of Dy3N@C80 (II) (D5h) has a negative shift of 290 mV relative to that of Dy3N@C80 (I) (Ih), indicating that lowering the molecular symmetry of the clusterfullerene cage results in a prominent increase in the electron-donating property. The first and second reduction potentials of Dy3N@C78 (II) are negatively shifted relative to those of Dy3N@C80 (I, II), pointing to the former's lowered electron-accepting ability. The significant difference in the electrochemical energy gaps of Dy3N@C80 (I), Dy3N@C80 (II), and Dy3N@C78 (II) is consistent with the difference in their optical energy gaps.     

The electronic and vibrational structure of endohedral Tm3N@C80 (I) fullerene--proof of an encaged Tm3+

The electronic and vibrational structure of the nitride clusterfullerene Tm3N@C80 (I) was investigated by cyclic voltammetry, FTIR, Raman, and X-ray photoemission spectroscopy. The electrochemical energy gap of Tm3N@C80 (I) is 1.99 V, which is 0.13 V larger than that of Sc3N@C80 (I). FTIR spectroscopy showed that the C80:7 (I(h)) cages in Tm3N@C80 (I), Er3N@C80 (I), Ho3N@C80 (I), Tb3N@C80 (I), Gd3N@C80 (I), and Y3N@C80 (I) have the same bond order. The analysis of low-energy Raman spectra points to two uniform force constants which can be used to describe the interaction between the encaged nitride cluster and the C80:7 (I(h)) cage in M3N@C80 (I) (M = Tm, Er, Ho, Tb, Gd, and Y). Because the M3N-C80 bond strength is strongly dependent on the charge of the metal ions, this is a direct hint for a 3+ formal valence state of the metal ions in these nitride clusterfullerene series, including Tm3N@C80 (I). Photoemission spectra of the Tm 4d core level and the Tm 4f valence electrons provided a direct proof for a (4f)12 electronic configuration of the encapsulated thulium. In conclusion, thulium in Tm3N@C80 (I) has a formal electronic ground state of +3, in contrast to the +2 state found in Tm@C82. It is demonstrated that the valence state of metal atoms encaged in fullerenes can be controlled by the chemical composition of the endohedral fullerene.     

Preparation and structural characterization of the Ih and the D5h isomers of the endohedral fullerenes Tm3N@C80: icosahedral C80 cage encapsulation of a trimetallic nitride magnetic cluster with three uncoupled Tm3+ ions

We report an efficient method for the preparation and purification of the Ih and the D5h isomers of Tm3N@C80. Following preparation in a Kratschmer-Huffman electric-arc generator, the Tm3N@C80 isomers were obtained by a chemical separation process followed by a one-stage isomer selective chromatographic high-performance liquid chromatography (HPLC) separation (pyrenyl, 5PYE column). The HPLC chromatographic retention behavior on a pentabromobenzyl (5PBB) column suggests a charge transfer of approximately 6 electrons; [M3N] 6+@C80(6-) and the chromatographic retention mechanisms of the Ih and the D5h isomers of Tm3N@C80 on both 5PBB and 5PYE columns are discussed. Single-crystal X-ray diffraction data demonstrate that the Tm3N cluster has a planar structure but represents a tight fit for trapping the Tm3N cluster inside the I h - and the D 5h -C 80 cages. Specifically, the Tm atoms punch out the cage carbon atoms adjacent to them. The "punched out" effect can be demonstrated by cage radii and pyramidal angles at cage carbon atoms near the Tm atoms. The magnetic susceptibility (chiT) for Tm3N@ Ih -C80 was found to exhibit Curie-Weiss behavior with C = 23.4 emu.K/mol, which is consistent with the calculated value for three uncoupled Tm3+ ions by considering the spin and orbital contributions with no quenching of the orbital angular momentum ( L = 5, S = 1, and J = 6; Ccalcd = 23.3 emu.K/mol). The electrochemical measurements demonstrate that both the Ih and the D5h isomers of Tm3N@C80 have a large electrochemical gap.     

The isomers of gadolinium scandium nitride clusterfullerenes GdxSc3-xN@C(80) (x=1, 2) and their influence on cluster structure

The isomers of gadolinium scandium mixed-metal nitride clusterfullerenes GdxSc3-xN@C(80) [x=2 (1, 4); x=1 (2, 5)] have been synthesized by the "reactive gas atmosphere" method and isolated facilely by recycling HPLC. The yield of GdxSc3-xN@C80 (I, II) (x=1, 2) relative to the homogenous clusterfullerenes Sc3N@C80 [I (3), II (6)] was determined. According to the UV/Vis/NIR spectroscopic data, 1, 2, 4, and 5 are all stable fullerenes with large optical gaps. Fullerene 1 has greater similarity to Gd3N@C80 (I) and 2 seems to resemble Sc3N@C80 (I). The quite similar overall absorption features of 4 and 5 suggest pronounced similarity in electronic structure. Vibrational spectroscopic studies led to the assignment of the cage symmetries of GdxSc3-xN@C80 (I, II), that is, Ih for 1, 2 and D5h for 4, 5. The cluster-cage interactions in GdxSc3-xN@C80 (I, II) were analyzed by means of the low-energy Raman lines. The splitting of the metal-nitrogen stretching vibrational mode in GdxSc3-xN@C80 (I, II) was studied in detail. Scalar-relativistic DFT calculations were performed to reveal the geometry parameters and the magnetic state of the GdxSc3-xN@C80 (I, II) molecules.     

Synthesis, isolation, and spectroscopic characterization of holmium-based mixed-metal nitride clusterfullerenes: HoxSc3-xN@C80 (x=1, 2)

The synthesis, isolation and spectroscopic characterization of holmium-based mixed metal nitride clusterfullerenes Ho(x) Sc(3-x) N@C(80) (x=1, 2) are reported. Two isomers of Ho(x) Sc(3-x) N@C(80) (x=1, 2) were synthesized by the reactive gas atmosphere method and isolated by multistep recycling HPLC. The isomeric structures of Ho(x) Sc(3-x) N@C(80) (x=1, 2) were characterized by laser-desorption time-of-flight (LD-TOF) mass spectrometry and UV/Vis/NIR, FTIR and Raman spectroscopy. A comparative study of M(x) Sc(3-x) N@C(80) (M=Gd, Dy, Lu, Ho) demonstrates the dependence of their electronic and vibrational properties on the encaged metal. Despite the distinct perturbation induced by 4f(10) electrons, we report the first paramagnetic (13) C?NMR study on Ho(x) Sc(3-x) N@C(80) (I; x=1, 2) and confirm I(h) -symmetric cage structure. A (45) Sc NMR study on HoSc(2) N@C(80) (I, II) revealed a temperature-dependent chemical shift in the temperature range of 268-308?K.     

Lanthanum nitride endohedral fullerenes La3N@C2n (43 <or= n <or= 55): preferential formation of La3N@C96

While the trimetallic nitrides of Sc, Y and the lanthanides between Gd and Lu preferentially template C(80) cages, M(3)N@C(80), and while those of Ce, Pr and Nd preferentially template the C(88) cage, M(3)N@C(88), we show herein that the largest metallic nitride cluster, La(3)N, preferentially leads to the formation of La(3)N@C(96) and to a lesser extent the La(3)N@C(88). This is the first time that La(3)N is successfully encapsulated inside fullerene cages. La(3)N@C(2n) metallofullerenes were synthesized by arcing packed graphite rods in a modified Kr?tschmer-Huffman arc reactor, extracted from the collected soot and identified by mass spectroscopy. They were isolated and purified by high performance liquid chromatography (HPLC). Different arcing conditions were studied to maximize fullerene production, and results showed that yields have a high La(2)O(3)/C dependence. Relatively high yields were obtained when a 1:5 ratio was used. Three main fractions, La(3)N@C(88), La(3)N@C(92), and La(3)N@C(96), were characterized by UV/Vis-NIR and cyclic voltammetry. Unlike other trimetallic nitride metallofullerenes of the same carbon cage size, La(3)N@C(88) exhibits a higher HOMO-LUMO gap and irreversible reduction and oxidation steps.     

Expanding the number of stable isomeric structures of the C80 cage: a new fullerene Dy3N@C80

The production, isolation, and spectroscopic characterization of a new Dy3N@C80 cluster fullerene that exhibits three isomers (1-3) is reported for the first time. In addition, the third isomer (3) forms a completely new C80 cage structure that has not been reported in any endohedral fullerenes so far. The isomeric structures of the Dy3N@C80 cluster fullerene were analyzed by studying HPLC retention behavior, laser desorption time-of-flight (LD-TOF) mass spectrometry, and UV-Vis-NIR and FTIR spectroscopy. The three isomers of Dy3N@C80 were all large band-gap (1.51, 1.33, and 1.31 eV for 1-3, respectively) materials, and could be classified as very stable fullerenes. According to results of FTIR spectroscopy, the Dy3N@C80 (I) (1) was assigned to the fullerene cage C80:7 (I(h)), whereas Dy3N@C80 (II) (2) had the cage structure of C80:6 (D(5h)). The most probable cage structure of Dy3N@C80 (III) (3) was proposed to be C80:1 (D(5d)). The significant differences between Dy3N@C80 and other reported M3N@C80 (M = Sc, Y, Gd, Tb, Ho, Er, Tm) cluster fullerenes are discussed in detail, and the strong influence of the metal on the nitride cluster fullerene formation is concluded.     

Gadolinium-based mixed-metal nitride clusterfullerenes Gd(x)Sc(3-x)N@C80 (x=1, 2).

The first gadolinium-based mixed-metal nitride clusterfullerenes Gd(x)Sc(3-x)N@C(80) (I) (1, x=2; 2, x=1) have been successfully synthesized by the reactive gas atmosphere method and isolated facilely by recycling high-performance liquid chromatography (HPLC). The sum yield of 1 and 2 is 30-40 times higher than that of Gd(3)N@C(80) (I). Moreover, an enhanced relative yield of 2 over the Sc(3)N@C(80) (I) is achieved under the optimized synthesis conditions. According to the UV/Vis/NIR spectroscopic characterization, 1 and 2 are both stable fullerenes with large optical band-gaps while 1 has higher similarity to Gd(3)N@C(80) (I) and 2 resembles Sc(3)N@C(80) (I). The vibrational structures of 1 and 2 are studied by Fourier-transform infrared (FTIR) spectroscopy as well as density functional theory (DFT) computations. In particular, the structures of the encaged Gd(x)Sc(3-x)N clusters within 1 and 2 are analyzed.     

Deviation from the planarity--a large Dy3N cluster encapsulated in an Ih-C80 cage: an X-ray crystallographic and vibrational spectroscopic study

The high-yield synthesis of Dy3N@C80 (I) opens the possibility of characterizing its molecular and vibrational structures. We report on the structure determination of Dy3N@C80 (I) by X-ray crystallographic study of single crystal of Dy3N@C80.Ni(OEP).2C6H6, revealing a nearly planar Dy3N cluster encapsulated in an Ih-C80 cage. The vibrational structure of Dy3N@C80 (I) is studied by Fourier transform infrared (FTIR) and Raman spectroscopy in combination with force-field calculations. A correlation was found between the antisymmetric metal-nitrogen stretching vibration and the structure of the M3N cluster of M3N@C80 (I) (M = Y, Gd, Tb, Dy, Ho, Er, Tm). Moreover, a stronger interaction between the encaged nitride cluster and the C80 carbon cage was found in the class II M3N@C80 (I) (M = Y, Gd, Tb, Dy, Ho, Er, Tm) than in Sc3N@C80 (I). This study demonstrates that the cluster size plays the dominating role in the structure of the M3N cluster in M3N@C80 (I).     

Comparative investigation on non-IPR C68 and IPR C78 fullerenes encaging Sc3N molecules

A computational study on the experimentally detected Sc(3)N@C(68) cluster is reported, involving quantum chemical analysis at the B3LYP/6-31G level. Extensive computations were carried out on the pure C(68) cage which does not conform with the isolated pentagon rule (IPR). The two maximally stable C(68) isomers were selected as initial Sc(3)N@C(68) cage structures. Full geometry optimization leads to a confirmation of an earlier assessment of the Sc(3)N@C(68) equilibrium geometry (Nature 2000, 408, 427), namely an eclipsed arrangement of Sc(3)N in the C(68) 6140 frame, where each Sc atom interacts with one pentagon pair. From a variety of theoretical procedures, a D(3h) structure is proposed for the free Sc(3)N molecule. Encapsulated into the C(68) enclosure, this unit is strongly stabilized with respect to rotation within the cage. The complexation energy of Sc(3)N@C(68) cage is found to be in the order of that determined for Sc(3)N@C(80) and exceeding the complexation energy of Sc(3)N@C(78). The cage-core interaction is investigated in terms of electron transfer from the encapsulated trimetallic cluster to the fullerene as well as hybridization between these two subsystems. The stabilization mechanism of Sc(3)N@C(68) is seen to be analogous to that operative in Sc(3)N@C(78). For both cages, C(68) and C(78), inclusion of Sc(3)N induces aromaticity of the cluster as a whole.     

Size effect of fullerene cages and encaged clusters in M_3N@C_(2n)

Based on the calculated findings that the sizes of encaged clusters determine the structures and the stability of C80-based trimetallic nitride fullerenes (TNFs), more extensive density functional theory calculations were performed on M3N@C68, M3N@C78 and M3N@C80 (M=Sc, Y and La). The calculated results demonstrated that the structures and stability undergo a transition with the increasing of the sizes of the cages and clusters. Sc3N is planar inside the three considered cages, Y3N is slightly pyramidal ins...     

Pyramidalization of Gd3N inside a C80 cage. The synthesis and structure of Gd3N@C80

The X-ray crystal structure of Gd(3)N@C(80).Ni(II)(OEP).1.5(benzene) shows that the Gd(3)N unit within the I(h) C(80) cage is pyramidal, whereas Sc(3)N@C(80), Sc(3)N@C(78), Sc(3)N@C(68), Lu(3)N@C(80) and Sc(2)ErN@C(80) have planar M(3)N units.     

Sc3N@C80: computations on the two-isomer equilibrium at high temperatures.

Reported herein are computations on the relative concentrations of the two experimentally known isomers of Sc3N@C80 , that is, those produced by encapsulation of Sc3N in two particular C80 cages that obey the isolated-pentagon rule, namely, with I(h) and D(5h) symmetries. The calculations are based on density functional methods and have been carried out using the Gibbs energy over a broad temperature interval. It has been computed that, if a relatively free motion of the encapsulate inside the cages is allowed, the observed populations of 10 and 17 % for the D(5h) Sc3N@C80 species are reached at temperatures of 2100 and 2450 K, respectively. The inclusion of the entropy term is essential as, if it is neglected, the D(5h) Sc3N@C80 population at a temperature of 2100 K would be a mere 1 %, owing to the relatively large interisomeric separation potential energy of 19 kcal mol(-1).     

Influence of cluster size on the structures and stability of trimetallic nitride fullerenes M3N@C80.

To provide insight into the influence of encaged clusters on the structures and stability of trimetallic nitride fullerenes (TNFs), extensive density functional theory calculations were performed on Sc3N@C80, Y3N@C80, and La3N@C80 as well as their encaged clusters. The calculated results demonstrated that both Sc3N and Y3N units are planar, whereas La3N units are pyramidal inside C80-I(h), and that both of the Y3N@C80 and La3N@C80 cages deform considerably in the planes of Y3 and La3. The calculated results suggest that M-cage attraction/repulsion and M-M repulsion interactions determine the geometries of these three complex molecules and the dynamics of the corresponding encaged clusters. These calculated findings distinctly reveal the influence of the size of the encaged clusters on the structures and stability of TNFs and may rationalize their significant differences in yields and chemical reactivity.     

Exohedral reactivity of trimetallic nitride template (TNT) endohedral metallofullerenes

[structures: see text] Fullerenes containing a trimetallic nitride template (TNT) within the cage are a particularly interesting class of endohedral metallofullerenes. Recently two exohedral derivatives of the Sc3N@C80 fullerene have been synthesized: a Diels-Alder and a fulleropyrrolidine cycloadduct. The successful isolation, purification, and structural elucidation of these metallofullerenes derivatives have encouraged us to understand how the chemical reactivity is affected by TNT encapsulation. First of all, we predicted the most reactive exohedral sites, taking into account the double bond character and the pyramidalization angle of the C-C bonds. For this purpose, a full characterization of all different types of C-C bonds of the following fullerenes was carried out: I(h)-C60:1, D3-C68:6140, D3-Sc3N@C68, D(5h)-C70:1, D(3h')-C78:5, D(3h)-Sc3N@C78, I(h)-C80:7 and several isomers of Sc3N@C80. Finally the exohedral reactivity of these TNT endohedral metallofullerenes, via [4 + 2] cycloaddition reactions of 1,3-butadiene, was corroborated by means of DFT calculations.     

Urea as a new and cheap nitrogen source for the synthesis of metal nitride clusterfullerenes: the role of decomposed products on the selectivity of fullerenes

By using urea as the new nitrogen source, for the first time, Sc-based metal nitride clusterfullerenes (NCFs), Sc(3)N@C(2n) (2n=80, 78, 70, 68), have been synthesized successfully. The optimum molar ratio of Sc(2)O(3)/CO(NH(2))(2)/C for the synthesis of Sc NCFs is 1:3:15. The yield of Sc(3)N@C(80)(I(h) +D(5h)) per gram of Sc(2)O(3), using CO(NH(2))(2) as the new nitrogen source, was quantitatively compared to those obtained when using the reported nitrogen sources, including N(2), NH(3), and guanidinium thiocyanate. We find that there is a clear difference on the selectivity of Sc-based NCFs within the extract mixture obtained from one rod and accumulative two rods. According to discharging experiments and XRD analysis, we conclude that NH(3) generated in situ from the decomposition of CO(NH(2))(2) is mainly responsible for the formation of Sc-based NCFs when using only one rod, whereas in the second rod CO(NH(2))(2) would decompose into melamine during discharging of the first rod. Thus, the selectivity of fullerenes is clearly dependent on the decomposed product of CO(NH(2))(2). Finally the difference in the decomposition behavior of CO(NH(2))(2) and melamine was studied in detail and a possible decomposition process of CO(NH(2))(2) during discharging was proposed. Accordingly, the difference in the selectivity and yield of Sc NCFs for CO(NH(2))(2) and melamine was interpreted.     

Structure and enhanced reactivity rates of the D5h Sc3N@C80 and Lu3N@C80 metallofullerene isomers: the importance of the pyracylene motif

In this paper we report enhanced reactivity of the D(5h) isomers in comparison with the more common I(h) isomers of Sc(3)N@C(80) and Lu(3)N@C(80) toward Diels-Alder and 1,3-dipolar tritylazomethine ylide cycloaddition reactions. Also, the structure of the D(5h) isomer of Sc(3)N@C(80) has been determined through single-crystal X-ray diffraction on D(5h)-Sc(3)N@C(80).Ni(OEP).2benzene (OEP = octaethylporphyrin). The Sc(3)N portion of D(5h)-Sc(3)N@C(80) is strictly planar, but the plane of these four atoms is tipped out of the noncrystallographic, horizontal mirror plane of the fullerene by 30 degrees . The combination of short bond length and high degree of pyramidization for the central carbon atoms of the pyracylene sites situated along a belt that is perpendicular to the C(5) axis suggests that these are the sites of greatest reactivity in the D(5h) isomer of Sc(3)N@C(80). Consistent with the observation of higher reactivity observed for the D(5h) isomers, cyclic voltammetry and molecular orbital (MO) calculations demonstrate that the D(5h) isomers have slightly smaller energy gaps than those of the I(h) isomers. The first mono- and bis-adducts of D(5h) Sc(3)N@C(80) have been synthesized via 1,3-dipolar cycloaddition of tritylazomethine ylide. The NMR spectrum for the monoadduct 2b is consistent with reaction at the 6,6-ring juncture in the pyracylene unit of the D(5h) Sc(3)N@C(80) cage and is the thermodynamically stable isomer. On the other hand, monoadduct 2a undergoes thermal conversion to other isomeric monoadducts, and three possible structures are proposed.