Electroneutrality coupling of electron transfer at an electrode surface and ion transfer across the interface between thin-layer of 1-octyl-3-methylimidazolium bis(perfluoroalkylsulfonyl)imide covering the electrode surface and an outer electrolyte solution.

The electrode reaction of decamethylferrocene (DMFc) dissolved in a thin layer of a room-temperature molten salt (RTMS), 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C8mimC1C1N) or 1-octyl-3-methylimidazolium bis(pentafluoroethylsulfonyl)imide (C8mimC2C2N), on a self-assembled monolayer-modified gold electrode is coupled with the ion transfer across the interface between the RTMS and the outer aqueous solution (W) to give a voltammogram whose shape resembles a voltammogram of a simple one-electron transfer process. The electroneutrality of the RTMS layer during the oxidation of DMFc to decamethylferricenium ion is maintained by the concomitant dissolution of C8mim+ ion from the RTMS phase to the W phase, and the reduction of decamethylferricenium ion to DMFc is accompanied by the transfer of either C1C1N- or C2C2N- from RTMS to W. The midpoint potential of the voltammogram varies with the concentration of the salt in the aqueous phase, C8mimCl or LiCnCnN (n = 1 or 2), in a Nernstian manner, showing that the phase-boundary potential between the RTMS and the W is controlled by the partition of these ions. Although the phase-boundary potential across the RTMS / W interface is Nernstian with respect to the ions common to both phases at the equilibrium, the polarization at the RTMS / W interface under current flow distorts the shape of the voltammograms, resulting in a wider peak separation in the voltammogram.     

Phase-boundary potential across the nonpolarized interface between the room-temperature molten salt and water

The phase-boundary potential across the interface between an aqueous phase (W) and a room-temperature molten salt (RTMS) that is sparingly soluble in W has been theoretically elucidated and experimentally confirmed using potentiometry for the RTMSs, 1-octyl-3-methylimidazolium salts of bis(trifluoromethylsulfonyl) imide and of bis(pentafluoroethylsulfonyl) imide. The phase-boundary potential across the interface is determined by the partition of the cation and anion constituting the RTMS and is little affected by the presence of indifferent electrolytes, such as NaCl in W. The interfaces experimentally studied are of nonpolarized character, in that the phase-boundary potential is nernstian with respect to the activities in W of the ions constituting the RTMS. By changing the concentration of these ions in W, the phase-boundary potential can be varied more than 300 mV.     

Amperometric Determination of Creatinine with a Dialysis Membrane‐Covered Nitrobenzene/Water Interface for Urine Analysis

The ion transfer of creatinine (CRE) at a polarized nitrobenzene (NB)/water (W) interface has been studied. When the pH of the W phase is in the range of 1.2 to 4.0, a well‐defined voltammetric wave is observed for a simple transfer of CRE⁺ (protonated form) at the NB/W interface. This transfer reaction has been applied to develop an amperometric method for the determination of CRE in urine. In this system, the NB/W interface is covered with a dialysis membrane to prevent possible interference from urine proteins. The concentration of CRE in a urine control has successfully been determined.     

Structure of the electrical double layer on the aqueous solution side of the polarized interface between water and a room-temperature ionic liquid, tetrahexylammonium bis(trifluoromethylsulfonyl)imide

The structure of the electrical double layer on the aqueous solution side has been studied by measuring electrocapillary curves at the polarized interface between a room-temperature ionic liquid (RTIL), tetrahexylammonium bis(trifluoromethylsulfonyl)imide, and water (W) at different concentrations of LiCl. Thermodynamic analysis of the electrocapillary curves indicates that Li+ ions negatively adsorb at the point of zero charge. The adsorption of Li+ and Cl- ions in the polarized potential window of about 200 mV can be explained by the Gouy's double layer model, and the specific adsorption of Li+ and Cl- ions at the RTIL|W interface is negligible within the polarized potential window.     

Ion-transfer voltammetry of local anesthetics at an organic solvent/water interface and pharmacological activity vs. ion partition coefficient relationship.

The ion-transfer reaction of local anesthetics at an organic solvent/water interface has been studied using cyclic voltammetry (CV) with a stationary nitrobenzene (NB)/water (W) interface. Procaine and seven other local anesthetics gave reversible or quasi-reversible voltammograms at the NB/W interface in the pH range between 0.9 and 9.6. These drugs are present in aqueous solution in either neutral or ionic form, or both forms. The half-wave potential, as determined by the midpoint potential in CV, vs. pH curves, were determined and analyzed to determine the partition coefficients of both neutral and ionic forms of the drugs between NB and W. The partition coefficients of the ionic forms were derived from their formal potential of transfer at an NB/W interface. The dissociation constants of ionic forms of the drugs in NB were also deduced. A high correlation between the pharmacological activity and the partition coefficient of the ionic form of amide-linked local anesthetics has been shown.     

Avalanche transfer of charged particles across the electrochemical liquid|liquid interface

Emulsion particles formed in the vicinity of the interface between nitrobenzene (NB) and water (W) pass through the interface concurrently, resulting in current spikes on current versus potential and current versus time curves. The fact that the spikes appear only in the limited range of the phase boundary potential suggests the importance of the electrostatic interaction between charged particles and the polarized NB∣W interface. Even in the potential range where the transfer of emulsions is favored, the transfer occurs only intermittently. Each current spike reflects the transfer of an accumulation of emulsion particles that were dammed up in the vicinity of the interface, which resembles an avalanche.     

Observation of the marcus inverted region of electron transfer reactions at a liquid/liquid interface

Scanning electrochemical microscopy was used to probe the influence of a driving force on the heterogeneous electron transfer (ET) processes at the externally polarized water/1,2-dichloroethane interface. Being a part of the driving force, the Galvani potential difference at the interface, Deltaowphi, can be quantitatively controlled in a wide range, allowing the precise measurements of the rate constants of the ET reactions. Two opposite systems were chosen in this work. One was 5,10,15,20-tetraphenyl 21H,23H-porphyrin zinc (ZnPor, O)/Fe(CN)64- (W), and the other was TCNQ (O)/Fe(CN)63- (W). For both systems studied, the relations between the rate constant and the Deltaowphi were of parabolic shape; that is, the rate constants increased initially with the Deltaowphi until reaching a maximum and then decreased steadily as the Deltaowphi increased further. This is in accordance with the prediction of the Marcus theory. To our knowledge, this is the first report that the Marcus inverted region can be observed electrochemically at an unmodified liquid/liquid interface with only one redox couple at each phase. The effect of the concentrations of the organic supporting electrolyte has also been discussed in detail.     

Voltammetric study of the transfer of fluoride ion at the nitrobenzene / water interface assisted by tetraphenylantimony.

The transfer of F- ion assisted by an organometallic complex cation tetraphenylantimony (TPhSb+) across the polarized nitrobenzene / water (NB / W) interface has been studied by means of ion-transfer voltammetry. A well-defined voltammetric wave was observed within the potential window at the NB / W interface when tetraphenylantimony tetrakis(4-chlorophenyl) borate and F- ion were present in NB and W, respectively. The voltammogram can be interpreted as being due to the reversible transfer of F- ion assisted by the formation of the TPhSbF complex through the coordination of F- to Sb atom in NB. The formal formation constant of TPhSbF in NB has been determined to be 10(1.95 +/- 0.2 M(-1). No voltammetric wave due to the TPhSb(+)-assisted transfer of other anions such as Cl-, Br, I-, NO3-, CH3COO- and H2PO4(-) ions has been observed within the potential window.     

Potential-modulated fluorescence spectroscopy of zwitterionic and dicationic membrane-potential-sensitive dyes at the 1,2-dichloroethane/water interface

The previously introduced technique of potential-modulated fluorescence (PMF) spectroscopy was used to study the potential-induced fluorescence change of some different dyes at the polarized 1,2-dichloroethane (DCE)/water (W) interface. A zwitterionic dye (POLARIC 488PPS) showed a PMF response similar to that for the previously studied dye (di-4-ANEPPS) with the same ionic state, and the PMF response was likewise explained by the potential-dependent reorientation of the dye at the DCE/W interface. Though a monocationic dye (POLARIC 488PM) showed no distinct PMF signal, a dicationic dye (di-2-ANEPEQ) showed two relatively weak but detectable PMF signals at lower and higher potential. It has thus been found that the ionic state of a potential-sensitive dye strongly influences the potential-induced reorientation of the dye at the interface and consequently its PMF response. These results support the reorientation/solvatochromic mechanism proposed for "slow" dyes but do not necessarily exclude the electrochromic mechanism proposed for "fast" dyes. PMF spectroscopy would provide useful information on the design of slow dyes for the measurement of the resting potential of cell membranes.     

Reverse micellar aggregates: effect on ketone reduction. 1. Substrate role

The reduction of three aromatic ketones, acetophenone (AF), 4-methoxyacetophenone (MAF), and 3-chloroacetophenone (CAF), by NaBH(4) was followed by UV-vis spectroscopy in reverse micellar systems of water/AOT/isooctane at 25.0 degrees C (AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate). The first-order rate constants, k(obs), increase with the concentration of surfactant due to the substrate incorporation at the reverse micelle interface, where the reaction occurs. For all the ketones the reactivity is lower at the micellar interface than in water, probably reflecting the low affinity of the anionic interface for BH(4)(-). Kinetic profiles upon water addition show maxima in k(obs) at W(0) approximately 5 probably reflecting a strong interaction between water and the ionic headgroup of AOT; at W(0) < 5 by increasing W(0) BH(4)(-) is repelled from the anionic interface once the water pool forms. The order of reactivity was CAF > AF > MAF. Application of a kinetic model based on the pseudophase formalism, which considers distribution of the ketones between the continuous medium and the interface, and assumes that reaction take place only at the interface, gives values of the rate constants at the interface of the reverse micellar system. At W(0) = 5, we conclude that NaBH(4) is wholly at the interface, and at W(0) = 10 and 15, where there are free water molecules, the partitioning between the interface and the water pool has to be considered. The results were used to estimate the ketone and borohydride distribution constants between the different pseudophases as well as the second-order reaction rate constant at the micellar interface.     

Interfacial ion pairing at the interface between water and a room-temperature ionic liquid, N-tetradecylisoquinolinium bis(pentafluoroethylsulfonyl)imide

The specific interaction of N-tetradecylisoquinolinium (C(14)Iq+) with Cl- and Br- has been detected in the voltammetry of ion transfer and electrocapillarity at the interface between an aqueous solution (W) and a room-temperature ionic liquid (RTIL), N-tetradecylisoquinolinium bis(pentafluoroethylsulfonyl)imide ([C(14)Iq+][C(2)C(2)N-]). This specific interaction also makes the transfer of Cl- and Br- into [C(14)Iq+][C(2)C(2)N-] energetically more favorable in comparison with that of F- and SO(4)(2-). The width of the polarized potential window in ion-transfer voltammetry at the [C(14)Iq+][C(2)C(2)N-]|W interface is significantly narrower because of the transfer of anions from W to RTIL. The degree of affinity of the anion with C(14)Iq+ agrees with the Hofmeister series. Such an ion-pair formation of anions in W with cations in the RTIL is much weaker when the cation constituting the RTIL is a symmetric tetraheptylammonium ion.     

碳纳米管在室温熔盐中的电容特性

研究了碳纳米管在室温熔盐二(三氟甲基磺酸酰)亚胺锂(LiTFSI)-乙酰胺中的电容特性. 将碳纳米管制成薄膜电极, 以LiTFSI-乙酰胺为电解液, 装配成模拟电容器, 用循环伏安和恒流充放电法研究其电化学性能. 结果表明, 碳纳米管在室温熔盐中表现出典型的电容特性, 其比电容为22 F•g^-1, 模拟电容器的工作电压可达2.0 V, 具有非常好的循环性能, 循环充放电1000次后容量损失仅10%, 表明室温熔盐是超级电容器非常有前景的新型电解液.     

Formation and characterization of emulsions using beta-cyclodextrin as an emulsifier

The preparation and characterization of n-alkane/water emulsions using beta-cyclodextrin (beta-CD) were studied. The prepared n-alkane/water emulsions were of the oil-in-water (O/W) type, and the stability of emulsions was in the order of n-hexadecane > n-dodecane > n-octane. From observations using polarized light microscopy and powder X-ray diffraction measurement, it was suggested that the formation of a dense film at the oil-water interface and the three-dimensional structural network created by precipitated complexes in the continuous phase are associated with the stability of emulsion. Furthermore, it was clarified that O/W-type emulsions were formed because the contact angle (theta ow) which the precipitate makes with the interface was theta ow < 90 degrees in all compounds (oils) used in this study.     

Cyclic voltammetry of ion transfer across the polarized interface between the organic molten salt and the aqueous solution

A molten salt, or ionic liquid, composed of tetrahexylammonium bis(perfluoroethylsulfonyl)imide forms with an aqueous solution a polarized interface where the phase-boundary potential can be controlled externally. The available potential window of about 300 mV at 40 °C enables us to apply various electrochemical techniques for studying the structure and charge transfer reactions at the molten salt–water interface. Cyclic voltammetry of the transfer of moderately hydrophobic ions, such as 1-octyl-3-methylimidazolium and hexafluorophosphate ions, across the interface exemplifies the potentiality of this new electrochemical interface. This new type of polarized interface would facilitates electrochemical studies of molten salt–water two-phase systems that have been studied as an environmentally benign alternative of organic solvent–water two-phase systems for liquid–liquid extraction and two-phase organic synthesis.     

Synchrotron radiation macrobeam and microbeam X-ray diffraction studies of interfacial crystallization of fats in water-in-oil emulsions

Using macrobeam and microbeam techniques, we performed synchrotron radiation X-ray diffraction (SR-XRD) analyses of fat crystallization in water-in-oil (W/O) emulsion, in combination with DSC and polarized optical microscopic observation. Particular focus was on the crystallization of the fats around water droplets in the W/O emulsion systems using food emulsifiers of polyglycerol polyricinoleate (PGPR) alone (PGPR emulsion), and PGPR and monobehenoylglycerol (MB) (PGPR+MB emulsion). We obtained the following results: (1) macrobeam SR-XRD confirmed that adding MB promoted fat crystallization during cooling, (2) microbeam SR-XRD indicated that the lamellar planes of fat crystals near the water and oil interfaces are arranged almost parallel to the interface planes in both PGPR emulsion and PGPR+MB emulsion, and (3) adding MB resulted in the formation of tiny fat crystals because it promoted crystallization, which occurred both in the bulk oil phase and at the W/O interfaces. The present study is the first to apply microbeam SR-XRD to observe the microscopic features of fat crystallization in W/O emulsion, following fat crystallization in the oil droplets in the oil-in-water (O/W) emulsion (Arima, S.; Ueno, S.; Ogawa, A.; Sato, K. Langmuir 2009, 25, 9777-9784).     

Electrochemical extraction of proteins by reverse micelle formation

The transfer of proteins by the anionic surfactant bis(2-ethylhexyl) sulfosuccinate (AOT) at a polarized 1,2-dichloroethane/water (DCE/W) interface was investigated by means of ion-transfer voltammetry. When the tetrapentylammonium salt of AOT was added to the DCE phase, the facilitated transfer of certain proteins, including cytochrome c (Cyt c), ribonuclease A, and protamine, could be controlled electrochemically, and a well-defined anodic wave for the transfer was obtained. At low pH values (e.g., pH 3.4), the anodic wave was usually well-separated from the wave for the formation of protein-free (i.e., unfilled) reverse micelles. The anodic wave for the protein transfer was analyzed by applying the theory for facilitated transfer of ions by charged ligands and then supplying information regarding the number of AOT anions reacting with one protein molecule and the total charge carried by the protein transfer. However, controlled-potential electrolyses performed for the transfer of Cyt c, which is red, revealed that the protein-AOT complexes were unstable in DCE and liable to aggregate at the interface when the pH of the W phase was 3.4. At pH 7.0, when formation of unfilled reverse micelles occurred simultaneously, the protein-AOT complexes appeared to be stabilized, probably via fusion with unfilled reverse micelles.     

Electron-conductor separating oil–water (ECSOW) system: a new strategy for characterizing electron-transfer processes at the oil/water interface

A new electrochemical method for studying the electron transfer (ET) at the oil (O)/water (W) interface (or the liquid/liquid) interface has been devised, in which the O- and W-phases are separated by an electron conductor (EC; e.g. Pt). For the EC separating O–W (ECSOW) system, the ET across the EC phase can be observed voltammetrically in a similar manner to the O/W interface, however, no ion-transfer (IT) process can be taken place. Although the ECSOW system is thermodynamically equivalent to the corresponding O/W interface, they may be different from a kinetic viewpoint. In practice, the cyclic voltammograms obtained with the nitrobenzene NB/W interface and the ECSOW system in the presence of ferrocene in NB and hexacyanoferrate in W have shown quite different features, when the concentrations of both redox species are lower. The voltammograms for the NB/W interface have strongly supported the IT mechanism which involves an interfacial transfer of ferricenium ion. Also, the ECSOW system has been shown to be promising for clarification of complicated charge-transfer processes involving biological compounds such as l-ascorbic acid.     

Interfacial Behavior of Mixed Systems of Glycerylether-Modified Silicone and Polyoxyethylene-Modified Silicone

Undecylglycerylether-modified silicone (GES; the glycerylether-type surfactant with a silicone segment and alkyl chains (carbon number, 11) as the hydrophobic portion) forms a molecular aggregate (M.A.) with a small amount of water. This M.A. is similar to the reversed hexagonal liquid crystal formed by alpha-mono long-chain alkylglycerylether (3-isooctadecyloxy-1,2-propanediol; GE). From the investigation of the phase behavior in the water/GES/polydimethylsiloxane (PDMS) ternary system, a wide three-phase region of water (W)+M.A.+oil (O) was observed. As this M.A. is insoluble in PDMS and easily orients in the interface between water and PDMS, the high water content silicone W/O emulsion using GES as a surfactant is well stabilized. However, as the PDMS content increased this W/O emulsion became less stable. In order to improve this stability, mixtures of GES and polyoxyethylene-modified silicone (PS) were applied to the silicone emulsion as co surfactant. By application of a PS with a methyl group at the end cap of the polyoxyethylene chain (PSM), the emulsion became most stable at a GES/PSM ratio of 1 : 2, and at the same time, the interfacial tension between the oil phase and the water phase became minimal. The reason for this was studied by the measurement of spin-lattice relaxation times (T(1)) of the alkyl chains of GES in the GES/PS/water system by (13)C NMR. We assumed that the W/O silicone emulsions were stabilized by the efficient orientation of the aggregates in the interface between the silicone phase and the water phase by using PSM as a cosurfactant. Copyright 2001 Academic Press.     

Structure and bonding energy analysis of cationic metal-ylyne complexes of molybdenum and tungsten, [(MeCN)(PMe3)4M≡EMes]+ (M = Mo, W; E = Si, Ge, Sn, Pb): a theoretical study

The molecular and electronic structures and bonding analysis of terminal cationic metal-ylyne complexes (MeCN)(PMe(3))(4)M≡EMes](+) (M = Mo, W; E = Si, Ge, Sn, Pb) were investigated using DFT/BP86/TZ2P/ZORA level of theory. The calculated geometrical parameters for the model complexes are in good agreement with the reported experimental values. The M-E σ-bonding orbitals are slightly polarized toward E except in the complex [(MeCN)(PMe(3))(4)W(SnMes)](+), where the M-E σ-bonding orbital is slightly polarized toward the W atom. The M-E π-bonding orbitals are highly polarized toward the metal atom. In all complexes, the π-bonding contribution to the total M≡EMes bond is greater than that of the σ-bonding contribution and increases upon going from M = Mo to W. The values of orbital interaction ΔE(orb) are significantly larger in all studied complexes I-VIII than the electrostatic interaction ΔE(elstat). The absolute values of the interaction energy, as well as the bond dissociation energy, decrease in the order Si > Ge > Sn > Pb, and the tungsten complexes have stronger bonding than the molybdenum complexes.     

Neurotransmitter Biomolecule Transfers Across Liquid/Liquid Interface Through A Thick Organic Membrane-Modified Electrode

Electrochemical studies at liquid/liquid interfaces (L/L, or soft interfaces) have disclosed a biomimetic model to mimic charge transfers at cytomembrane surface. Herein, we reported two neurotransmitter biomolecules of dopamine and adrenalone across the L/L interface by a thick organic membrane-modified electrode. This system comprised polarized electrode/oil and oil/water interfaces in series in which the electron transfer (ET) of redox 7,7,8,8-tetracyanoquinodimethane (TCNQ) at electrode/oil interface drove ion transfer (IT) of biomolecules at oil/water interface. This ET-IT coupled reaction overcame the limitation of polarized potential window at conventional single polarized L/L interface. The crucial design of a thick organic membrane could ensure the generated TCNQ anions maintained at electrode/oil interface during the voltammetry, which could not result in interruptions to biomolecule transfers. Through this system, their Gibbs transfer free energies were accurately determined (44.4 and 39.4 kJ mol^?1 for dopamine and adrealone, respectively). Moreover, facilitated biomolecule transfers were evaluated by crown ionophores where both facilitated numbers and constants were determined simultaneously. Owing to the simple electrochemical setup, this system would hold great potentials in future hydrophilic biomacromolecule transfers, such as DNA, peptides and proteins.