离散元与有限元结合的多尺度方法及其应用

在深入研究复杂结构和非均质材料冲击响应和破坏机理的过程中,往往遇到多尺度计算问题.提出并建立起离散元与有限元结合的多尺度方法,该方法采用离散元对感兴趣的局部进行细观尺度的模拟,利用有限元进行宏观的模拟,从而节约了计算时间.采用一种特殊的过渡层衔接离散元区和有限元区.将这一方法应用于激光辐照下预应力铝板的破坏响应,并将得到的模拟结果与实验进行了比较.     

ANSYS在气体探测器电场分布计算中的应用

介绍了气体探测器电场分布的计算方法,以计算MSGC探测器单元电场分布为例说明了如何用ANSYS软件包来计算结构较复杂的气体探测器内部电场分布,同时讨论了电场分布对气体探测器性能的影响.     

多介质流模拟的Runge-Kutta控制体积间断有限元方法（英文）

构造可用于多介质流数值模拟的Runge-Kutta控制体积(RKCV)间断有限元方法.对于多介质流模拟,使用线性和非线性的Riemann问题解法器计算界面处的数值流通量.该方法是一种高精度的数值方法且可以保证流体的局部守恒.数值结果表明,即使是利用线性Riemann问题解法器的计算格式也可获得较好的数值结果.与Runge-kutta间断Galerkin方法的比较展示了本文构造算法的优势.     

基于有限元方法的离子俘获装置模拟计算

利用有限元程序ANSYS,开展潘宁离子俘获装置的电场模拟计算。基于电场数据,结合Runge_Kutta_Fehlberg方法进行潘宁装置在多种模式下的离子俘获过程模拟工作,得到了准确的离子俘获结果。并对实际条件下具有偏离理想情况电极分布的俘获装置进行了优化计算及电场分析,同样实现了离子俘获过程的准确模拟。有限元方法用于离子俘获装置的电场计算以及后续离子俘获过程模拟流程的建立,为类似的电势阱离子俘获装置建造运行提供有效的技术支持。     

TEA CO2激光器预电离结构电极系统的电场研究

 高功率气体激光器的非对称复杂电极系统中,电极参数的变化以及预电离结构的引入将会使所设计的均匀电场发生具体的改变。采用高精度有限元方法,对这类复杂电极系统进行建模并且计算其电场分布,根据分析结果更合理地指导激光器设计。对一种典型的非对称复杂电极系统TEA CO₂激光器,应用该方法并结合了预电离过程,研究了引入预电离器导体和变化电极形状对电极表面的电场强度起伏和放电空间的均匀电场面积产生的影响。结果表明:通过这种预先模拟,合理选择电极构型参数和预电离结构安装位置,可以产生性质较好的均匀电场以及效率较高的激光输出。     

基于多属性决策的复杂网络节点重要性综合评价方法

复杂网络中的节点重要性评价在实际应用中有着重要意义.现有的一些重要性评价指标如度、介数等存在适用范围有限,评价结果不够全面等缺点,因为节点在复杂网络中的重要性不仅仅受单一因素的影响.为此,本文提出了一种基于多属性决策的复杂网络节点重要性综合评价方法.该方法将复杂网络中的每一个节点看作一个方案,其多个重要性评价指标作为该方案的属性,通过计算每个方案到理想方案的接近程度,最终得到该节点的重要性综合评价结果.该方法不仅可以用于不同类型复杂网络的节点重要性评价,而且便于扩展,实验结果表明了该方法的有效性.     

HLS注入段束流位置探头定标电场的拟合和误差计算

 描述了束流位置探测器(BPM)探头定标、定标电场的拟合和误差计算。该定标系统采用了具有调节精度为10μm垂直放置真空管道的天线模拟定标装置和分辨率高达1μm外差式、窄带频域信号处理电子学线路。并推导出针对合肥光源（HLS）定标系统条件下的电场拟合函数及相关的BPM-Mapping图和误差计算结果,较精确地计算出该高精度定标系统误差。     

单行载流子光电探测器中空间电荷屏蔽效应理论分析和实验研究

本文优化设计和外延生长了一种单行载流子(UTC)光电探测器有源区结构,并且采用微电子工艺制备了台面尺寸为30μm的UTC光电探测器.同时,采用了漂移-扩散模型对该有源区结构进行了理论模拟,从载流子浓度和空间电场角度重点分析研究了空间电荷屏蔽效应对UTC光电探测器直流饱和特性影响的物理机理.UTC光电探测器理论模拟结果与实测数据基本相符.     

基于高阶叠层矢量基函数的E-H时域有限元方法分析谐振腔和波导结构

将高阶叠层矢量基函数用于E-H时域有限元方法,电场和磁场用相同的基函数展开并同时求解,时间离散采用Crank-Nicolson差分格式使得时间步长的选取摆脱稳定性条件的限制,同时采用完美匹配层来截断计算区域.对三维谐振腔及波导结构进行数值模拟与分析,结果表明,相较于低阶基函数,高阶叠层矢量基函数可以有效提高E-H时域有限元方法的计算精度.     

基于LabVIEW的多点串联光纤传感系统设计

设计了一种远程多点光纤传感系统用于大范围对象测量,其结构为一个本地控制节点通过双向光纤链路串联所有远端传感节点。在本地控制节点共享光源、光电检测器等光电器件,并结合虚拟仪器实现数据处理电路;而远端传感节点仅包含敏感元件、无源光器件构成的光路,并能直接实现时分复用。以3节点系统的甲烷气体检测为例进行实验和计算,结果证明该方案能够有效工作,通过循环检测可使首个传感节点的相对误差降至0．2％以下。     

Simulation of the response functions of an extended range neutron multisphere spectrometer using FLUKA

In this paper, the distribution of radiation field in the CSNS spectrometer hall at Dongguan, China, was simulated by the FLUKA program. The results show that the radiation field of the high energy proton accelerator is dominated by neutron radiation, with a broad range of neutron energies, spanning about eleven orders of magnitude.Simulation and calculation of the response functions of four Bonner spheres with a simplified model is done with FLUKA and MCNPX codes respectively, proving the feasibility of the FLUKA program for this application and the correctness of the calculation method. Using the actual model, we simulate and calculate the energy response functions of Bonner sphere detectors with polyethylene layers of different diameters, including detectors with lead layers, using the FLUKA code. Based on the simulation results, we select eleven detectors as the basic structure for an Extended Range Neutron Multisphere Spectrometer(ERNMS).     

CEE-TPC中GEM读出探测器传输性能实验研究

气体电子倍增器(GEM)因其具有较好的位置分辨以及各项同性的二维结构等优点,近年来受到了广泛的关注,在HIRFL-CSR上正在建设的低温高密核物质测量谱仪(CEE)也计划使用GEM作为TPC的读出探测器。不同电场条件下GEM探测器的传输特性对探测器的有效增益及能量分辨有较大影响。文中研究了单层GEM探测器中漂移区电场及感应区电场对探测器传输特性的影响;随后研究了双层GEM探测器的电压分配及传输区电场对探测器电荷传输性能的影响。结果表明,在单层及多层GEM探测器中,漂移区电场、传输区电场及感应区电场主要通过改变电子透过率和GEM雪崩电场强度及分布影响探测器的电荷传输性能,进而影响探测器的有效增益及能量分辨。以上实验结果表明GEM探测器是CEE-TPC读出探测器的理想选择,同时测试结果也为TPC中多层级联GEM工作点的选择提供了参考依据。     

Comparison between level set and phase field method for simulating bubble movement behavior under electric field

In this study, based on different numberical simulation methods, the gas-liquid two-phase flow is taken as the research object. By coupling the continuity equation of incompressible fluid, Navier-Stokes equation, electric field equation and other control equations, a multi-field coupling model for rising bubbles in viscous fluids is established, and numerical simulations are carried out. The two-phase popularity of coupled electric field is studied, and the effect of electric field on bubble motion is analyzed.The Level-set and phase field method are used to track the changes of deformation and rupture during the rising of the bubble. The accuracy and validity of the two methods are verified by mass conservation. At the same time, the calculation area is determined for the accuracy of calculation, and the optimal mesh size is calculated by using mesh independence test. Compared with the level set method, the phase field method has a certain improvement in the calculation efficiency and accuracy. Among them, the calculation efficiency of the phase field calculation method in the same grid is increased by 5 times, and by 3 times in the vertical electric field environment. Moreover, using the phase field method is easier to capture the bubbles slight changes while they are rising, and the quality of the simulation results is better.The simulation analysis of bubble rising process under coupled electric field by two methods shows that under the interaction of electrostatic force, buoyancy and surface tension, the bubble is stretched into an ellipsoid along the direction of the electric field line, and the ratio of the length to the short axis is proportional to the applied electric field strength. In addition, the bubble rising velocity is affected by the electric field, and the vertical electric field accelerates the rising of the bubble.     

静电场描绘的一种改进方法

本文介绍的是使用算术平均法作出等势线,描绘静电场。与课本中的方法进行比较,结果误差更小,更准确的描绘了静电场的分布。     

Studies on the drift properties and spatial resolution using a microMEGAS-equipped time projection chamber

R&D studies on the performance as well as on the gas properties of the microMEGAS-based time projection chamber with standard readout were carried out in June 2005 using 4 GeV/c pion beam in a magnetic field from 0 to 1 T at the proton synchrotron beam line at KEK, Japan. Analysis of the electron drift velocity, diffusion constant and point resolution of padrow measurement for MicroMEGAS TPC filled with 95% argon and 5% isobutane gas are presented. The underlying physical mechanism which determines the optimal TPC performance are briefly discussed. Preliminary measurements of gas properties and spatial resolution in close agreement with the analytical calculation and MAGBOLTZ simulation are summarized and presented in this paper.      

标准镜的高精度柔性支撑镜框的优化设计

为了实现干涉仪标准镜中光学元件的高精度定位,设计了一种柔性支撑镜框,研究了该结构的力学模型、结构参数、定位精度和透镜变形。首先,根据材料力学原理将柔性镜框等效为一个弹簧系统;根据力学方程和几何关系,建立了透镜中心位置与柔性结构的挠度之间的二元方程。然后,分析了安装位置、温度、结构参数对透镜位置以及作用力的影响。最后,应...     

无精准同步的小规模水声网络节点相对自定位

提出了一种无精准同步的小规模水声网络节点相对自定位方法。针对节点数量较少的小规模水声网络,利用水声通信在无精准时钟同步的情况下进行节点间测距,进而根据由相邻节点构成的三角形结构校正节点的相对位置。通过仿真得到,在几种典型拓扑结构下,该方法在测距误差不超过10 m时,将初始定位误差降低40%以上。在水声网络自组织的同时进行节点自定位,避免了传统的二次定位过程,节省了节点能耗和定位时间,并在一定范围内提高了定位精度。      

Lekner summation of dipolar interaction in quasi-two-dimensional simulations

The Lekner method for calculation of electrostatic interactions in periodically replicated simulation cells is extended to quasi-two-dimensional systems of particles with dipolar interactions. The electric field, potential energy, forces and torques are expressed through rapidly converging series of modified Bessel functions. The method contains no arbitrary parameters, and has no limitations on the simulation box width.     

Calculation of stationary electron beams with space-charge-limited current

The calculation method is based on direct satisfaction of the condition of a zero normal electric field on the emitter by means of an iteration procedure that makes it unnecessary to obtain self-consistent solutions of the stationary-beam equations in individual iterations. The method employs auxiliary potential and space-charge nets for solution of the boundary-value problem and eliminates the idle nodes of the auxiliary potential net. The method is effective in the analysis of curvilinear beams and has been tested in the design of a Meltzer gun with circular trajectories and a strongly nonuniform transverse current distribution.