Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

Phase stability,elastic, electronic,thermal and optical properties of Ti3Al1−xSixC2 (0≤x≤1): First principle study

The structural parameters with stability upon Si incorporation and elastic, electronic, thermodynamic and optical properties of Ti₃Al_1−xSi_xC₂ (0≤x≤1) are investigated systematically by the plane wave pseudopotential method based on the density functional theory (DFT). The increase of some elastic parameters with increasing Si-content renders the alloys to possess higher compressive and tensile strength. The Vickers hardness value obtained with the help of Mulliken population analysis increases as x is increased from 0 to 1. The solid solutions considered are all metallic with valence and conduction bands, which have a mainly Ti 3d character, crossing the Fermi level. The temperature and pressure dependences of bulk modulus, normalized volume, specific heats, thermal expansion coefficient, and Debye temperature are all obtained through the quasi-harmonic Debye model with phononic effects for T=0−1000 K and P=0−50 GPa. The obtained results are compared with other results available. Further an analysis of optical functions for two polarization vectors reveals that the reflectivity is high in the visible–ultraviolet region up to ∼10.5 eV region showing promise as a good coating material.     

Annealing effect on CdS/SnO2 films grown by chemical bath deposition

The extensive investigation of the annealing effect in nitrogen atmosphere on the structural optical and electrical properties of chemically deposited CdS films on SnO₂ has been performed. The as-deposited film shows 2.45 eV band gap (E_g) and decreases with increasing annealing temperature. The film annealed at 623 K having pure hexagonal phase (a = 4.14 Å, c = 6.71 Å for [1 0 0] plane) and E_g = 2.36 eV shows 10 times higher conductivity for all temperature range, and shows two different activation energies E_a = 0.114 eV and E_a = 0.033 eV for the temperature range 395 K ≤ T ≤ 515 K and 515 K ≤ T ≤ 585 K, respectively. The structural parameters such as dislocation density, strain and optical parameters such as absorption and extinction coefficient are calculated and compared for all the films.     

Structural and thermodynamic properties of AlB2 compound

We employ a first-principles plane wave method with the relativistic analytic pseudopotential of Hartwigsen, Goedecker and Hutter (HGH) scheme in the frame of DFT to calculate the equilibrium lattice parameters and the thermodynamic properties of AlB₂ compound with hcp structure. The obtained lattice parameters are in good agreement with the available experimental data and those calculated by others. Through the quasi-harmonic Debye model, obtained successfully are the dependences of the normalized lattice parameters a/a₀ and c/c₀ on pressure P, the normalized primitive cell volume V/V₀ on pressure P, the variation of the thermal expansion α with pressure P and temperature T, as well as the Debye temperature \Theta_D and the heat capacity C_V on pressure P and temperature T.     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

On the ferromagnetism of AlFe2B2

Based on extensive Mossbauer effect (ME) and magnetization measurements, the orthorhombic AlFe₂B₂ was characterized as a ferromagnet (FM) because this character is evident as an onset of a FM transition at T_c=320 K and characteristic magnetizations isotherms below T_c. At liquid helium temperatures, the magnetization saturates to μ_sat≈1μ_B per Fe atom; a value which is half the one reported for the iron metal indicating a relatively more filled 3d band. The ME analysis revealed a hyperfine field H(0) of 88(2) kOe, an isomer shift (relative to Fe) of 0.50(2) mm/s, and a quadrupole parameter of 0.02 mm/s: all parameters extrapolated to zero Kelvin. The itinerant character of the magnetic moment will be discussed.     

Synthesis,magnetic and electrical transport properties of magnetoresistance material Sr2FeMoO6 by microwave sintering

Magnetoresistance material Sr₂FeMoO₆ with double perovskite structure was synthesized by microwave sintering method using SrCO₃, Fe₂O₃ and MoO₃ as raw materials, with MnO₂ for microwave absorber. The phase structure, magnetic and electrical transport properties were investigated by X-ray powder diffraction (XRD) and vibrating-sample magnetometer. XRD analysis shows that the as-synthesized sample is Sr₂FeMoO₆ with tetragonal crystal structure and I4/mmm space group. The unit cell parameters are a=0.5587 nm, c=0.7894 nm, volume=0.2464 nm³. The calculated grain size of the sample is 31.62 nm, which is obtained by the Scherrer formula using the diffraction data. Magnetism testing results show that the sample Sr₂FeMoO₆ is ferromagnetic with the magnetic transition temperature of about 380 K. Under 1.0 T magnetic field, the saturation and spontaneous magnetization of Sr₂FeMoO₆ is 1.25 μ_B/f.u. and 1.00 μ_B/f.u. at room temperature. The magnetoresistance ratio of the sample is 28%. Electrical transport properties testing results indicate that the sample exhibits typical semiconductor behavior. The conductive mechanism of Sr₂FeMoO₆ is highly dependent on temperature: within the temperature range of 100–300 K, the mechanism is attributed to the small polaron variable-range hopping model; while it is ascribed to the adiabatic small polaron model within the temperature range of 80–100 K.     

High pressure X-ray diffraction and electrical resistance study of the quasi-one-dimensional sulfide InV6S8

The ambient structural details and the results of room temperature high pressure angle dispersive X-ray diffraction and electrical resistance measurements on the quasi-one-dimensional sulfide, InV₆S₈, to a pressure of 25 GPa are reported. The material does not undergo a phase transition in this pressure range, though an anomaly in the c/a ratio has been observed around 10 Gpa. A fit of the Murnaghan equation of state to the V/V₀ versus pressure data, with the value of the derivative of B₀ with respect to pressure, B′₀, fixed at 4 has yielded a value of the bulk modulus, B₀, of 110 GPa. We also present data of the pressure dependence of the lattice constants, a and c, the ratio c/a, and the resistance at room temperature.     

First-principles calculations of structural and thermodynamic properties of BeB2 compound

The lattice parameter bulk modulus and pressure derivative of BeB2 are calculated by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of density function theory. The calculated results agree well with the average experimental data and other theoretical results. Through the quasi-harmonic Debye model, the dependences of the normalized lattice parameters a/ao, c/c0 and the normalized primitive cell volume V/Vo on pressure P, the variation of the thermal expansion coefficient ~ with pressure P and temperature T, as well as the dependences of the heat capacity Cv on pressure P and temperature T are obtained systematically.     

Effect of Mn on the magnetic properties of Fe3B/Nd2Fe14B nanocomposites

The magnetic properties of Nd_4.5Fe_77−xMn_xB_18.5 (x=0, 1 and 2) nanocomposites prepared by the crystallization of amorphous precursors were investigated. Addition of Mn is found to decrease the crystallization temperature of the amorphous ribbons. The intrinsic coercivity _iH_c and maximum energy product (BH)_max increase from 2.6 kOe and 9.1 MGOe for x=0 to 3.1 kOe and 10.3 MGOe for x=1, respectively, and the remanence ratio M_r/M_s increases from 0.70 to 0.72. The effect of Mn on Curie temperature T_C and the thermal stability of M_r and _iH_c were also studied. ⁵⁷Fe Mössbauer spectra have been recorded for x=0, 1 and 2 ribbons at room temperature and site preference of the Mn atoms in Fe₃B and Nd₂Fe₁₄B phases is discussed using the Mössbauer spectroscopy.     

Rotational spectra of gauche perfluoro-n-butane, C4F10; perfluoro-iso-butane, (CF3)3CF; and tris(trifluoromethyl)methane, (CF3)3CH

The microwave spectra of the gauche conformer of perfluoro-n-butane, n-C₄F₁₀, of perfluoro-iso-butane, (CF₃)₃CF, and of tris(trifluoromethyl)methane, (CF₃)₃CH, have been observed and assigned. The rotational and centrifugal distortion constants for gauche n-C₄F₁₀ are: A = 1058.11750(7) MHz, B = 617.6832(1) MHz, C = 552.18794(1) MHz, Δ_J = 0.0257(5) kHz, δ_J = 0.0052(3) kHz. A C-C-C-C dihedral angle, ω, of ∼55° has been determined. These values agree well with those obtained from a coupled cluster (CCSD/cc-PVTZ) calculation. The rotational and centrifugal distortion constants for iso-C₄F₁₀ and iso-C₄HF₉ are: B_o = 816.4519(4) MHz, D_J = 0.023(2) kHz, and B_o = 903.6985(25) MHz, D_J = 0.043(4) kHz, respectively. The dipole moment of iso-C₄F₁₀ and iso-C₄HF₉ have been measured and found to be 0.0338(8) and 1.69(9) D, respectively.     

Heat capacity measurements of itinerant electron magnetism in Y3Ni13−xCOxB2 system

The heat capacity of the Y₃Ni_13−xCo_xB₂ series has been measured from 300 mK to RT. The magnetic ordering phase transitions have been characterized as second-order type and the T_c's determined. The electronic contribution to the low-temperature heat capacity for x=0 yields an electronic constant γ=54 mJ mol K², which is higher than those of YNi₅ and YNi₄B, proving experimentally that its density of states at the Fermi surface is larger than in those other compounds. The substitution of Ni by Co increases γ linearly. Electronic band calculations could explain these features.     

Equation of state of aluminum carbide Al4C3

Quasi-hydrostatic compression of aluminum carbide, Al₄C₃ has been studied to 6 GPa at room temperature using energy-dispersive X-ray powder diffraction with synchrotron radiation. A fit of the experimental p-V data to the Birch equation of state yields the values of the bulk modulus, B₀, of 130(5) GPa and the first pressure derivative of the bulk modulus, B′₀, of 4.6(9). The compression is found to be anisotropic, with the a-axis being more compressible than the c-axis.     

Effect of sorbic acid doping on flux pinning in bulk MgB2 with the percolation model

In this paper, we study the doping effect of sorbic acid (C₆H₈O₂), from 0 to 20 wt.% of the total MgB₂, on critical temperature (T_c), critical current density (J_c), irreversibility field (H_irr) and crystalline structure. The XRD patterns of samples show a slightly decrease in a-axis lattice parameter for doped samples, due to the partial substitution of carbon at boron site. On the other hand, we investigate the influence of doping on the behavior of flux pinning and J_c(B) in the framework of percolation theory and it is found that the J_c(B) behavior could be well fitted in high field region. The two key parameters, anisotropy and percolation threshold, play very important roles. It is believed that the enhancement of J_c is due to the reduction of anisotropy in high field region.     

Microstructural and superconducting properties of C6H6 added bulk MgB2 superconductor

The effect of aromatic hydrocarbon (benzene, C₆H₆) addition on lattice parameters, microstructure, critical temperature (T_c), critical current density (J_c) of bulk MgB₂ has been studied. In this work only 2 mol% C₆H₆ addition was found to be very effective in increasing the J_c values, while resulting in slight reduction of the T_c. J_c values of 2 mol% C₆H₆ added MgB₂ bulks reached to 1.83×10⁶ A/cm² at 15 K and 0 T. Microstructural analyses suggest that J_c enhancement is associated with the substitution of carbon with boron and which also results in the smaller MgB₂ grain size. The change in the lattice parameters or the lattice disorder is claimed as a cause of the slight reduction in the T_c by carbon addition. We note that our results show the advantages of C₆H₆ addition include homogeneous mixing of precursor powders, avoidance of expansive nanoadditives, production of highly reactive C, and significant enhancement in J_c of MgB₂, compared to un-doped samples.     

Pressure effects on structural,elastic and electronic properties of BaZnO2: first-principles study

The structural, elastic and electronic properties of BaZnO₂ under pressure are investigated by the plane wave pseudopotential density functional theory (DFT). The calculated lattice parameters and unit cell volume of BaZnO₂ at the ground state are in good agreement with the available experimental data and other theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B, shear modulus G, B/G, Poisson’ s ratio σ, Debye temperature Θ and aggregate acoustic velocities V_P and V_S are systematically investigated. It is shown that BaZnO₂ maintains ductile properties under the applied pressures. Analysis for the calculated elastic constants has been made to reveal the mechanical stability and mechanical anisotropy of BaZnO₂. At the ground state, the calculated compressional and shear wave velocities are 8.26 km/s and 1.81 km/s, respectively, and the Debye temperature Θ is 240.8 K. The pressure dependences of the density of states and the bonding property of BaZnO₂ are also investigated.     

Effects of indium doping on the superconducting properties of YBa2Cu3Oy sintered compounds and thin films

We investigated the effects of indium doping on the superconducting properties of YBCO sintered samples and thin films. In₂O₃-doped YBCO and YBa₂Cu_3−xIn_xO_y sintered samples showed a gradual decrease in the critical temperature (T_c) with increasing indium content; however, a T_c value above 80 K was maintained even up to 30 vol.% addition and x = 0.4, respectively. Ba₃Cu₃In₄O₁₂ was detected by X-ray diffractometry and energy-dispersive X-ray spectroscopy as a reaction product for both sintered samples. The normalized J_c under a magnetic field of 0.1 T showed a maximum at x = 0.3. Indium-doped YBCO films prepared by pulsed laser deposition showed a similar dependence of T_c on indium content as the sintered samples.     

Analysis of rotational structure in the high-resolution infrared spectrum and assignment of vibrational fundamentals of butadiene-2,3-C2

The 2,3-¹³C₂ isotopomer of butadiene was synthesized, and its fundamental vibrational fundamentals were assigned from a study of its infrared and Raman spectra aided with quantum chemical predictions of frequencies, intensities, and Raman depolarization ratios. For two C-type bands in the high-resolution (0.002 cm⁻¹) infrared spectrum, the rotational structure was analyzed. These bands are for ν₁₁ (a_u) at 907.17 cm⁻¹ and for ν₁₂ (a_u) at 523.37 cm⁻¹. Ground state and upper state rotational constants were fitted to Watson-type Hamiltonians with a full quartic set of centrifugal distortion constants and two sextic ones. For the ground state, A₀ = 1.3545088(7) cm⁻¹, B₀ = 0.1469404(1) cm⁻¹, and C₀ = 0.1325838(2)  cm⁻¹. The small inertial defects of butadiene and two ¹³C₂ isotopomers, as well as for five deuterium isotopomers as previously reported, confirm the planarity of the s-trans rotamer of butadiene.     

Structural and elastic properties of Ce2O3 under pressure from LDA+U method

We investigate the structural and elastic properties of hexagonal Ce₂O₃ under pressure using LDA+U scheme in the frame of density functional theory (DFT). The obtained lattice constants and bulk modulus agree well with the available experimental and other theoretical data. The pressure dependences of normalized lattice parameters a/a ₀ and c/c ₀, ratio c/a, and normalized primitive volume V/V ₀ of Ce₂O₃ are obtained. Moreover, the pressure dependences of elastic properties and three anisotropies of elastic waves of Ce₂O₃ are investigated for the first time. We find that the negative value of C ₄₄ is indicative of the structural instability of the hexagonal structure Ce₂O₃ at zero temperature and 30 GPa. Finally, the density of states (DOS) of Ce₂O₃ under pressure is investigated.     

Flame structure studies of rich ethylene-oxygen-argon mixtures doped with CO2, or with NH3, or with H2O

Structures of several premixed ethylene-oxygen-argon rich flat flames burning at 50 mbar have been established by using molecular beam mass spectrometry in order to investigate the effect of CO₂, or NH₃, or H₂O addition on species concentration profiles. The aim of this study is to examine the eventual changes of profiles of detected hydrocarbon intermediates which could be considered as soot precursors (C₂H₂, C₄H₂, C₅H₄, C₅H₆, C₆H₂, C₆H₄, C₆H₆, C₇H₈, C₆H₆O, C₈H₆, C₈H₈, C₉H₈ and C₁₀H₈). The comparative study has been achieved on four flames with an equivalence ratio (f) of 2.50: one without any additive (F2.50), one with 15% of CO₂ replacing the same quantity of argon (F2.50C), one with 3.3% of NH₃ in partial replacement of argon (F2.50N) and one with 13% of H₂O in replacement of the same quantity of argon (F2.50H). The four flat flames have similar final flame temperatures (1800 K).CO₂, or NH₃, or H₂O addition to the fresh gas inlet causes a shift downstream of the flame front and thus flame inhibition. Endothermic processes CO₂ + H = CO + OH and H₂O + H = H₂ + OH are responsible of the reduction of the hydrocarbon intermediates in the CO₂ and H₂O added flames through the supplementary formation of hydroxyl radicals. It has been demonstrated that such processes begin to play at the end of the flame front and becomes more efficient in the burnt gases region.The replacement of some Ar by NH₃ is responsible only for a slight decrease of the maximum mole fraction of C₂H₂, but NH₃ becomes much more efficient for C₄H₂ and C₅ to C₁₀ species. Moreover, the efficiency of NH₃ as a reducing agent of C₅ to C₁₀ intermediates is larger than that of CO₂ and H₂O for equal quantities added.