硅烯量子点二聚物的等离激元激发

基于含时密度泛函理论,研究了随着间距改变时硅烯量子点二聚物的等离激元激发特性。沿垂直于硅烯所在平面方向激发时,在一定间距范围内,硅烯量子点二聚物中形成了长程电荷转移激发模式。参与长程电荷转移激发的π电子主要在两个量子点之间运动。该等离激元模式随着间隙的减小发生蓝移。此外,在不同间距时,体系中还有两个等离激元共振带,分别位于7和15 eV附近。沿平行于硅烯所在平面方向激发时,由于两个量子点之间的耦合,在低能     

Interaction of volatile organic compounds (VOCs) emitted from banana on stanene nanosheet—a first-principles studies

Using ab initio calculation, structural stability, including electronic properties of bare/hydrogenated stanene (BSn/HSn) nanosheet, was explored. The geometrical stability of HSn material is verified with the influence of phonon band structure and formation energy. The concentration of the present work is to check the quality of Musa acuminata (banana) fruits when it is in ripe and overripe stage using HSn nanosheet material. Further, the interaction of different volatile organic compounds, namely, isoamyl acetate, isobutyl acetate, acetoin, and 2,3-butanediol aromas on HSn base material is studied with the significant parameter such as Bader charge transfer, band gap, adsorption energy, and average energy band gap changes. The sensitivity of the aromas emitting from ripe and overripe stages of banana on HSn nanosheet was studied using density of states spectrum. The adsorption energy of HSn nanosheet is found in the range of ??0.055 to ??0.989 eV upon the interaction VOCs of Musa acuminata. The novel aspect of the present work is to check the quality of Musa acuminata with the influence of HSn nanosheet using density functional theory.     

Metal‐Functionalized Silicene for Efficient Hydrogen Storage

First‐principles calculations based on density functional theory are used to investigate the electronic structure along with the stability, bonding mechanism, band gap, and charge transfer of metal‐functionalized silicene to envisage its hydrogen‐storage capacity. Various metal atoms including Li, Na, K, Be, Mg, and Ca are doped into the most stable configuration of silicene. The corresponding binding energies and charge‐transfer mechanisms are discussed from the perspective of hydrogen‐storage compatibility. The Li and Na metal dopants are found to be ideally suitable, not only for strong metal‐to‐substrate binding and uniform distribution over the substrate, but also for the high‐capacity storage of hydrogen. The stabilities of both Li‐ and Na‐functionalized silicene are also confirmed through molecular dynamics simulations. It is found that both of the alkali metals, Li⁺ and Na⁺, can adsorb five hydrogen molecules, attaining reasonably high storage capacities of 7.75 and 6.9 wt %, respectively, with average adsorption energies within the range suitable for practical hydrogen‐storage applications.     

A Complex Comprising a Cyanine Dye Rotaxane and a Porphyrin Nanoring as a Model Light‐Harvesting System

A nanoring‐rotaxane supramolecular assembly with a Cy7 cyanine dye (hexamethylindotricarbocyanine) threaded along the axis of the nanoring was synthesized as a model for the energy transfer between the light‐harvesting complex LH1 and the reaction center in purple bacteria photosynthesis. The complex displays efficient energy transfer from the central cyanine dye to the surrounding zinc porphyrin nanoring. We present a theoretical model that reproduces the absorption spectrum of the nanoring and quantifies the excitonic coupling between the nanoring and the central dye, thereby explaining the efficient energy transfer and demonstrating similarity with structurally related natural light‐harvesting systems.     

Charge transfer in the TCNQ-sexithiophene complex

Molecular crystals from thiophene molecules can be doped with TCNQ-F4 molecules for use in all-organic optoelectronic and semiconductor devices. The charge transfer and the molecular orbital energy level formation in between these two organic molecules are investigated here by density functional theory calculations. The isolated molecules are calculated nonbonded and bonded together, forming a charge transfer complex (CTC). The relaxed structure of the complex shows essentially coplanar and centered molecules with the alpha-sexithiophene rings tilted alternatingly by 4.8 degrees. The bond formation of these molecules results in a charge transfer of approximately 0.4 e from the alpha-sexithiophene to the TCNQ-F4 molecule. The highest occupied molecular orbital-lowest unoccupied molecular orbital gap width is reduced as compared to the isolated molecules due to the newly formed orbitals in the CTC. Upon adsorption on a Au(111) surface, electrons are transferred onto the molecule complex, thereby causing the molecular levels to align asymmetric with respect to the charge neutrality level. The theoretical results for the single molecule and CTC layer are compared to experimental photoemission and scanning tunneling spectroscopy results.     

Charge transfer excitations in cofacial fullerene-porphyrin complexes

Porphyrin and fullerene donor-acceptor complexes have been extensively studied for their photo-induced charge transfer characteristics. We present the electronic structure of ground states and a few charge transfer excited states of four cofacial porphyrin-fullerene molecular constructs studied using density functional theory at the all-electron level using large polarized basis sets. The donors are base and Zn-tetraphenyl porphyrins and the acceptor molecules are C(60) and C(70). The complexes reported here are non-bonded with a face-to-face distance between the porphyrin and the fullerene of 2.7 to 3.0 A?. The energies of the low lying excited states including charge transfer states calculated using our recent excited state method are in good agreement with available experimental values. We find that replacing C(60) by C(70) in a given dyad may increase the lowest charge transfer excitation energy by about 0.27 eV. Variation of donor in these complexes has marginal effect on the lowest charge transfer excitation energy. The interfacial dipole moments and lowest charge transfer states are studied as a function of face-to-face distance.     

Theoretical investigation of the interaction between the metal phthalocyanine [MPc]a(M = Sc,Ti, and V; a = –1, 0, and +1) complexes and formaldehyde

Formaldehyde (FA, CH₂O) is one of the toxic volatile organic compounds that cause harmful effects on the human body. In this work, the interaction of FA gas with metal phthalocyanine (MPc) molecules was studied by employing density functional theory calculations. A variety of [MPc]^a (M = Sc, Ti, and V; a = –1, 0, and +1) complexes were studied, and the electronic properties, interaction energies, and charge transfer properties of all of the studied molecules were systematically discussed. Among the studied complexes, the Sc and Ti phthalocyanines were more reactive toward the adsorption of FA gas. Moreover, it was revealed that the interaction of the [ScPc]⁺¹ and [TiPc]⁰ complexes with the CH₂O molecule was stronger, in which the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy gap of 46% and 36% decreased after FA adsorption. The results indicated that the MPc-based materials may be a promising candidate for the detection of FA gas.     

A first principles study on organic molecule encapsulated boron nitride nanotubes

The electronic structures of boron nitride nanotubes (BNNTs) doped with organic molecules are investigated using density functional theory. An electrophilic molecule introduces acceptor states in the wide gap of BNNT close to the valence band edge, which makes the doped system a p-type semiconductor. However, with typical nucleophilic organic molecules encapsulation, only deep occupied molecular states but no shallow donor states are observed. There is a significant electron transfer from a BNNT to an electrophilic molecule, while the charge transfer between a nucleophilic molecule and a BNNT is negligible. When both electrophilic and nucleophilic molecules are encapsulated in the same BNNT, a large charge transfer between the two kinds of molecules occurs. The resulting small energy gap can strongly modify the transport and optical properties of the system.     

A Complex Comprising a Cyanine Dye Rotaxane and a Porphyrin Nanoring as a Model Light-Harvesting System

A nanoring-rotaxane supramolecular assembly with a Cy7 cyanine dye (hexamethylindotricarbocyanine) threaded along the axis of the nanoring was synthesized as a model for the energy transfer between the light-harvesting complex LH1 and the reaction center in purple bacteria photosynthesis. The complex displays efficient energy transfer from the central cyanine dye to the surrounding zinc porphyrin nanoring. We present a theoretical model that reproduces the absorption spectrum of the nanoring and quantifies the excitonic coupling between the nanoring and the central dye, thereby explaining the efficient energy transfer and demonstrating similarity with structurally related natural light-harvesting systems.     

Charging energy and barrier height of pentacene on Au(111): a local-orbital hybrid-functional density functional theory approach

We analyze the pentacene/Au(111) interface by means of density functional theory (DFT) calculations using a new hybrid functional; in our approach we introduce, in a local-orbital formulation of DFT, a hybrid exchange potential, and combine it with a calculation of the molecule charging energy to properly describe the transport energy gap of pentacene on Au(111). Van der Waals forces are taken into account to obtain the adsorption geometry. Interface dipole potentials are also calculated; it is shown that the metal/pentacene energy level alignment is determined by the potential induced by the charge transfer between the metal surface and the organic material, as described by the induced density of interface states model. Our results compare well with the experimental data.     

Electronic Properties of Transition‐Metal‐Decorated Silicene

The electronic properties of 3d transition metal (TM)‐decorated silicene were investigated by using density functional calculations in an attempt to replace graphene in electronic applications, owing to its better compatibility with Si‐based technology. Among the ten types of TM‐doped silicene (TM–silicene) studied, Ti‐, Ni‐, and Zn‐doped silicene became semiconductors, whereas Co and Cu doping changed the substrate to a half‐metallic material. Interestingly, in cases of Ti‐ and Cu‐doped silicene, the measured band gaps turned out to be significantly larger than the previously reported band gap in silicene. The observed band‐gap openings at the Fermi level were induced by breaking the sublattice symmetry caused by two structural changes, that is, the Jahn–Teller distortion and protrusion of the TM atom. The present calculation of the band gap in TM–silicene suggests useful guidance for future experiments to fabricate various silicene‐based applications such as a field‐effect transistor, single‐spin electron source, and nonvolatile magnetic random‐access memory.     

Adsorption properties versus oxidation states of rutile TiO2(110)

Using density functional theory we have studied the adsorption properties of different atoms and molecules deposited on a stoichiometric, reduced, and oxidized rutile TiO(2)(110) surface. Depending on the oxidation state of the surface, electrons can flow from or to the substrate and, therefore, negatively or positively charged species are expected. In particular, we have found that a charge transfer process from or to the surface always occurs for highly electronegative or highly electropositive species, respectively. For atoms or molecules with intermediate electron affinity, the direction of the charge flow depends on the oxidation state of the rutile surface and on the adsorption site. Generally, the charging effect leads to more stable complexes. However, the increase in the binding energy of the adsorbates is highly dependent on the electronic states of the surface prior to the adsorption event. In this work we have analyzed in details these mechanisms and we have also established a direct correlation between the enhanced binding energy of the adsorbates and the induced gap states.     

THE TRIPLET EXCITED STATES OF BILIVERDIN AND BILIVERDIN DIMETHYL ESTER

Abstract— The triplet states of biliverdin and biliverdin dimethyl ester have been generated using pulse radiolysis excitation. Biliverdin triplet was formed by energy transfer from biphenyl triplet in acetone, absorbed throughout the wavelength range studied (380–1000 nm) and had a half-life of 11.7μs under the cpnditions chosen. Biliverdin dimethyl ester triplet was formed by energy transfer from biphenyl triplet in benzene, likewise absorbed throughout the wavelength range studied (360–1000 nm) and had a half-life of 6.7μs under the conditions used. Both biliverdin and biliverdin dimethyl ester efficiently quench anthracene, naphthacene, but not μ-carotene, triplet states. On the other hand. neither μ-carotene nor oxygen were found to quench the triplet states of biliverdin or biliverdin dimethyl ester. Estimates or limits for the rate constants of all these quenching reactions were obtained. These reactivities suggest that the triplet levels of both biliverdin and biliverdin dimethyl ester lie around 90 kJ mol^-1. The triplet energy transfer rate from bilirubin to biliverdin dimethyl ester in benzene was measured to be 1.9 × 10⁹ M^-1 s^-1. The singlet-triplet intersystem crossing efficiencies of both molecules were very low, limits of 0.004 and 0.001 being found for biliverdin and biliverdin dimethyl ester, respectively, using 347 nm laser excitation.     

Sensing Characteristics of a Graphene‐like Boron Carbide Monolayer towards Selected Toxic Gases

By using first‐principles calculations based on density functional theory, we study the adsorption efficiency of a BC₃ sheet for various gases, such as CO, CO₂, NO, NO₂, and NH₃. The optimal adsorption position and orientation of these gas molecules on the BC₃ surface is determined and the adsorption energies are calculated. Among the gas molecules, CO₂ is predicted to be weakly adsorbed on the graphene‐like BC₃ sheet, whereas the NH₃ gas molecule shows a strong interaction with the BC₃ sheet. The charge transfer between the molecules and the sheet is discussed in terms of Bader charge analysis and density of states. The calculated work function of BC₃ in the presence of CO, CO₂, and NO is greater than that of a bare BC₃ sheet. The decrease in the work function of BC₃ sheets in the presence of NO₂ and NH₃ further explains the affinity of the sheet towards the gas molecules. The energy gap of the BC₃ sheets is sensitive to the adsorption of the gas molecules, which implies possible future applications in gas sensors.     

Stability of atomic oxygen chemisorption on Pt‐alloy surfaces

A density functional theory calculation is used to investigate the atomic oxygen (O) stability over platinum (Pt) and Pt‐based alloy surfaces. Here, the stability is connected with the preferential adsorption sites for O chemisorptions and the adsorption energy. Thus, the interaction mechanism between atomic O and metal surfaces is studied by using charge transfer analysis. In this present paper, atomic structure and binding energy of oxygen adsorption on the Pt(111) are in a very good agreement with experiment and previous density functional theory calculations. Furthermore, we obtained that the addition of ruthenium (Ru) and molybdenum (Mo) on the pure Pt surface enhances the adsorption energy. Our charge transfer analysis shows that the largest charge transfer contributing to the metal‐O bonding formation is observed in the case of O/PtRuMo surface followed by O/PtRu surface. This is in consistency with metal d‐orbital characteristic, where Mo has much more empty d‐orbital than Ru in correspondence to accept electrons from atomic oxygen. Copyright © 2016 John Wiley & Sons, Ltd.     

First-principles studies of lithium adsorption and diffusion on silicene with grain boundaries

As a close relative to graphene, silicene is advanced in high lithium capacity, yet attracting various manipulation strategies to promote its role in energy storage. Following grain boundary (GB) engineering route as widely used in graphene studies, in this work, first-principles calculations were performed to investigate adsorption and diffusion behaviors of lithium on silicene with GBs of 4|8 or 5|5|8 defects. In both GB forms, donation of the Li 2s electron to the GBs significantly increases the Li adsorption energy, whereas small energy barriers facilitate the Li migration on the silicene surface. Furthermore, the large hole of GB(4-8) also permits easy penetration of the Li ions through the defective silicene sieve. These important features demonstrate GBs are beneficial for enhancing capacity and charge speed of the Li batteries. Thus, superior anodes made of silicene with GBs are expected to serve a key solution for future energy storages.     

Novel methodology to control the adsorption structure of cationic porphyrins on the clay surface using the "size-matching rule"

Saponite-type clays that have different cation exchange capacities were successfully synthesized by hydrothermal synthesis. The structure and properties were analyzed by X-ray diffraction, X-ray fluorescence, (27)Al NMR, FT-IR, thermogravimetric and differential thermal analysis, atomic force microscopy, and cation exchange capacity measurement. The intercharge distances on the synthetic saponite (SS) surfaces were calculated to be 0.8-1.9 nm on the basis of a hexagonal array. The complex formation behavior between SS and cationic porphyrins was examined. It turns out that the average intermolecular distance between porphyrin molecules on the SS surface can be controlled, depending on the charge density of the SS. In the case of tetrakis(1-methylpyridinium-4-yl)porphyrin (H(2)TMPyP(4+)), the average intermolecular distances on the SS surface can be controlled from 2.3 to 3.0 nm on the basis of a hexagonal array. It was also found that absorption maxima of porphyrins depend on the charge density of the SS. The adsorption behavior of porphyrin on the SS surface can be rationally understood by the previously reported "size-matching rule". This methodology using host-guest interaction can realize a unique adsorption structure control of the porphyrin molecule on the SS surface, where the gap distance between guest porphyrin molecules is rather large. These findings will be highly valuable to construct photochemical reaction systems such as energy transfer in the complexes.     

过渡金属掺杂的g-GaN吸附Cl2和CO气体分子的第一性原理研究

基于密度泛函理论的第一性原理计算, 系统研究了类石墨烯氮化镓(g-GaN)和掺杂过渡金属原子(TM)的 g-GaN 对 Cl₂和CO气体分子的吸附行为。结果表明, Cl₂和 CO在本征 g-GaN上的吸附均为物理吸附, 2个体系的吸附能均为正值, 表明体系不稳定。相反, Cl₂和 CO在 Fe和 Co掺杂的 g-GaN上吸附时的吸附能为负值, 且吸附能较小, 表明吸附体系稳定。通过分析态密度、电荷密度差和能带结构等性质, 可以得出结论:过渡金属原子的引入能有效增强气体分子与 g-GaN之间的相互作用。     

Dispersion corrected-DFT investigation on the adsorption and selective detection of organic solvent vapors by Cu2(HCOO)4 paddle wheel of metal organic framework

Porous metal organic frameworks (MOFs) has shown large surface area and high micropore volume making it a promising electrode material for sensing devices. Adsorption and electronic sensitivity of copper-based open metal sites paddlewheel (Cu₂(HCOO)₄) towards polar, moderately polar, and non-polar organic solvent vapors (OSVs) were was investigated using density functional theory, employing B3LYP. The most stable adsorption structures were those with the OSVs interacting with the metal node of PW. Based on calculations, the adsorption energy of molecules is in the range of ?7.8 to ?24.8 kcal/mol, ?9.2 to ?25.7 kcal/mol, and ?6.6 to ?10.9 kcal/mol for polar, moderately polar, and non-polar OSVs, respectively. Also sensing activities of PW were studied from three points of view band gap changing, sensing factor, and work function changes. From the standpoint of conductivity changing, Cu-PW has (i) low sensitivity to acetonitrile, acetone, dimethyl formamide, dimethyl ether, benzene, and ethanol; (ii) moderate sensitivity to toluene, and (iii) strong sensitivity to THF detection so that its HOMO/LUMO gap of the PW is significantly decreased from 1.63 to 0.97 eV which may increase the electrical conductivity, sensing factor is 1.4 * 10¹¹, and work function changing is 0.45 eV after THF adsorption. Thus, we suggest that Cu-PW may be used as a highly sensitive/selective and multi-time reusable sensor material for THF detection.     

Theoretical study of the reactivity of cesium with benzene and graphitic C(x)H(y) clusters

The adsorption of a Cs atom on planar (C6H6 and C24H12) and nonplanar (C20H10 and C21H9) carbon clusters has been studied using the density-functional theory, with the local-density approximation and atomic pseudopotentials. Binding energies as a function of separation have been calculated for several configurations of the Cs atom on the different substrates. The adsorption on sites above the center of carbon rings is more stable than adsorption on top of carbon atoms and C-C bonds. In the case of the curved clusters, adsorption on the concave side is preferred compared to the convex side. The Cs bonding is stronger on the nonplanar clusters. The strength of the binding energy depends on two effects: the magnitude of the highest occupied molecular orbital-lowest unoccupied molecular orbital (LUMO) energy gap of the substrate, and the energy of the valence state of Cs relative to the LUMO of the substrate. Due to a favorable relative position of those two energy levels, charge transfer occurs from Cs to the two nonplanar clusters, and this provides an ionic contribution to the bonding. The analysis of the electronic density redistribution and of the local Fukui functions helps in the interpretation of the charge transfer and the reactivity.