Cationic polyelectrolytes. II. Amination of chloromethylated polystyrene with hydroxyalkylic secondary amines

The reaction of chloromethylated polystyrene with methyl(2- hydroxyethyl)amine and butyle (2-hydroxyethyl)amine was studied kinetically. The reaction of benzyl chloride with these amines was also investigated for comparison. N,N-dimethylformamide and dioxane were used as solvents. The reactions of benzyl chloride with the two amines in these solvents took place according to normal kinetics of the second order. Reaction kinetics depend on the nature of the amine and solvent in Chloromethylated polystyrene reactions. In dioxane the self-accelerating effect of the reaction for β ? 0.5 is apparent. Steric hindrance of the reaction, beginning with a conversion degree of about 75%, wss observed for butyl(2-hydroxyethyl)amine in N,N-dimethylformamide. This self-accelerating effect is observed in dioxane at the same reaction degree. The activation energies and frequency factors were calculated for the amination of benzyl chloride and chloromethylated polystyrene with the two amines in N,N-dimethylformamide and dioxane.     

[3+2] Dipolar cycloadditions of an unstabilised azomethine ylide under continuous flow conditions

The [3+2] dipolar cycloaddition reactions of the unstabilised azomethine ylide precursor benzyl(methoxymethyl)(trimethylsilylmethyl)amine with 12 electron-deficient alkenes in the presence of catalytic trifluoroacetic acid are examined under continuous flow conditions (20-100 °C, 10-60 min residence time). The more reactive and hazardous alkenes such as ethyl acrylate, N-methylmaleimide and (E)-2-nitrostyrene afford substituted N-benzylpyrrolidine products in 77-83% yields, whereas less reactive dipolarophiles such as (E)-crotononitrile and ethyl methacrylate give lower yields (59-63%). Under optimised conditions, the reaction with ethyl acrylate is scaled up to afford ethyl N-benzylpyrrolidine-3-carboxylate (30 g, 87%) in 1 h.     

Convenient Esterification of Carboxylic Acids by SN2 Reaction Promoted by a Protic Ionic-Liquid System Formed in Situ in Solvent-Free Conditions

The reaction of esterification of benzoic acid with benzyl chloride was chosen as a model reaction to study the esterification by S_N2 promoted by tertiary amine as deprotonating agent. The use of ionic liquid (IL) 1,3-dimethylimidazolium methanesulfonate [MMIm][OMs] as reaction medium has proven to give quantitative yield of the ester, but interestingly the reaction does occur even in solvent-free conditions, where the acid + the amine form a liquid system (a protic IL) in situ. This last methodology was extended to several carboxylic acids in conditions of atom economy (i.e., without excess of any reagent), giving moderately good yields of esters (54–78%) recovered by weight in pure form.     

Practical chemoenzymatic dynamic kinetic resolution of primary amines via transfer of a readily removable benzyloxycarbonyl group

A practical method for chemoenzymatic dynamic kinetic resolution of primary amines using dibenzyl carbonate as acyl donor has been developed leading to benzyl carbamates, which can be deprotected under very mild reaction conditions to give the free amine.     

Reactions of (benzamidomethyl)triethylammonium chloride with some inorganic nucleophiles in aqueous media

A variety of benzamidomethyl derivatives were prepared in water under alkaline conditions (pH>9) via reaction of (benzamidomethyl)triethylammonium chloride (1) with different inorganic nucleophiles. Reaction of 1 with hydroxylamine did not give the expected mono(benzamidomethyl)-hydroxylamine (3) but rather gave N,N- di(benzamidomethyl)hydroxylamine (2). Reactions of 1 with sodium azide and potassium cyanide gave benzamidomethyl azide (4a) and benzamidomethyl cyanide (4b) respectively. Potassium thiocyanate and sodium iodide reacted with 1, and the anion- exchanged products (benzamidomethyl)triethylammonium isothiocyanate (5a) and (benzamidomethyl)triethylammonium iodide (5b) were thus obtained. Cyanamide and potassium cyanate reacted readily with 1 and both gave the same mixture of di(benzamidomethyl)amine (7) and tri(benzamidomethyl)amine (8). All the reactions occurred smoothly, under mild conditions, to give the products in moderate to high yields.     

三丁胺胺化强碱性阴离子交换树脂催化合成羧酸苄酯

用组合化学方法筛选出的对无外加碱条件下的亲核取代催化活性最高的聚合物季铵盐-三丁胺胺化强碱性阴离子交换树脂为相转移催化剂,催化合成了乙酸苄酯、丙酸苄酯、丁酸苄酯、戊酸苄酯等羧酸苄酯。讨论了各种反应条件对合成丙酸苄酯的产率的影响,并对传统合成方法进行了改进。在优化反应条件下,反应产率接近100%。     

Selective Production of Secondary Amine by the Photocatalytic Cascade Reaction Between Nitrobenzene and Benzyl Alcohol over Nanostructured Bi2MoO6 and Pd Nanoparticles Decorated with Bi2MoO6

The synthesis of secondary amine by the photoalkylation of nitrobenzene with benzyl alcohol using a simple light source and sunlight is a challenging task. Herein, a one-pot cascade protocol is employed to synthesize secondary amine by the reaction between nitrobenzene and benzyl alcohol. The one-pot cascade protocol involves four reactions: (a) photocatalytic reduction of nitrobenzene to aniline, (b) photocatalytic oxidation of benzyl alcohol to benzaldehyde, (c) reaction between aniline and benzaldehyde to form imine, and (d) photocatalytic reduction of imine to a secondary amine. The cascade protocol to synthesize secondary amine is accomplished using Bi₂MoO₆ and Pd nanoparticles decorated Bi₂MoO₆ catalysts. The surface characteristics, oxidation states, and elemental compositions of the materials are characterized by several physicochemical characterization techniques. Optoelectronic and photoelectrochemical measurements are carried out to determine the bandgap, band edge potentials, photocurrents, charge carrier's separation, etc. An excellent yield of secondary amine is achieved with simple household white LED bulbs. The catalyst also exhibits similar or even better activity in sunlight. The structure-activity relationship is established using catalytic activity data, control reactions, physicochemical, optoelectronic characteristics, and scavenging studies. Bi₂MoO₆ and Pd nanoparticles decorated Bi₂MoO₆ exhibit excellent photostability and recyclability. The simple catalyst design with a sustainable and economical light source for the synthesis of useful secondary amine from the nitrobenzene and benzyl alcohol would attract the researchers to develop similar catalytic protocols for other industrially important chemicals.     

Organic reactivity in liquid ammonia

Liquid ammonia is a useful solvent for many organic reactions including aliphatic and aromatic nucleophilic substitution and metal-ion catalysed reactions. The acidity of acids is modified in liquid ammonia giving rise to differences from conventional solvents. The ionisation constants of phenols and carbon acids are the product of those for ion-pair formation and dissociation to the free ions. There is a linear relationship between the pK(a) of phenols and carbon acids in liquid ammonia and those in water of slope 1.68 and 0.7, respectively. Aminium ions exist in their unprotonated free base form in liquid ammonia. The rates of solvolysis and aminolysis by neutral amines of substituted benzyl chlorides in liquid ammonia show little or no dependence upon ring substituents, in stark contrast with the hydrolysis rates of substituted benzyl halides in water which vary 10(7) fold. However, the rates of the reaction of phenoxide ions and amine anions with 4-substituted benzyl chlorides gives a Hammett ρ = 1.1 and 0.93, respectively. The second order rate constants for the substitution of benzyl chlorides by neutral and anionic amines show a single Br?nsted β(nuc) = 0.21 whereas those for substituted phenoxide ions generate a Br?nsted β(nuc) = 0.40. The rates of aromatic nucleophilic substitution reactions in liquid ammonia are much faster than those in protic solvents indicating that liquid ammonia behaves like a typical dipolar aprotic solvent in its solvent effects on organic reactions. Nitrofluorobenzenes (NFB) readily undergo solvolysis in liquid ammonia but oxygen nucleophiles, such as alkoxide and phenoxide ions, displace the fluorine of 4-NFB in liquid ammonia to give the corresponding substitution product with little or no competing solvolysis product. The Br?nsted β(nuc) for the reaction of 4-NFB with para-substituted phenoxides is 0.91, indicative that the decomposition of the Meisenheimer σ-intermediate is rate limiting. The aminolysis of 4-NFB occurs without general base catalysis by the amine and the second order rate constants generate a Br?nsted β(nuc) of 0.36, which is also interpreted in terms of rate limiting breakdown of the Meisenheimer σ-intermediate.     

一种多取代硝基环丙烷的开环反应研究

以一种多取代硝基环丙烷为底物,研究其在不同条件下的开环反应.以苄胺为亲核试剂时,底物发生开环生成烯胺化合物,对此反应机理进行了分析.研究了底物的还原开环反应：1）在Pd/C的催化氢化下,底物发生开环并消除硝基,得到烷基取代丙二酸二甲酯衍生物;2）在浓盐酸存在下用锌粉还原底物,得到五元环内酰胺.     

Synthesis of a putative subtype specific antigenic heptapeptide from Escherichia coli K88 ad protein fimbriae

The heptapeptide methyl ester Phe-Asn-Glu-Asn-Met-Ala-Tyr-OMe covering the amino acid sequence of the region 213-219 of Escherichia Coli K88 ad protein fimbriae is synthesized using N alpha-t-butyloxycarbonyl-protection and benzyl groups for side-chain-protection. All condensation reactions are performed in 84-97% yield by preactivation of the protected amino acids by dicyclohexylcarbodiimide (DCC) and 1-hydroxybenzotriazole (HOBt), and reaction of the resulting active ester with amine in the presence of 4-methylmorpholine (NMM). A mechanism is proposed for the nitrile formation in the side-chain of activated asparagine, and the suppression of this side-reaction is investigated. The repetitive deprotection is performed in a mixture of trifluoroacetic acid (TFA), phenol and p-cresol to give the TFA salts in virtually quantitatively yields. The final deprotection of the heptapeptide is carried out in a mixture of 25% hydrogen fluoride (HF) and dimethyl sulfide (DMS) in an overall yield of 48%. The serological and conformational properties of the synthetic peptide are under investigation.     

INITIATION VIA HALOBORATION IN LIVING CATIONIC POLYMERIZATION. 6. A NOVEL METHOD FOR THE SYNTHESIS OF PRIMARY AMINE FUNCTIONAL POLYISOBUTYLENES

Polyisobutylene (PIB) benzyl amine was synthesized by reacting benzyl azide with the dichloroboron head group of PIB obtained by polymerization of isobutylene (IB) via haloboration-initia-tion with boron trichloride. The facile, one-pot reaction at room temperature resulted in quantitative conversion of the PIB dichloroboron head groups into benzyl amine functionality, determined by ¹H NMR spectroscopy and titration with per-chloric acid. The hydrogenation of the secondary amine was attempted with various hydrogenation catalysts, of which only palladium yielded primary amine functional PIB. Pt and PtO hydrogenated the benzene ring resulting in PIB cyclohexyl methylene amine. With Pd only about 80% of the chain ends carried the primary amine functional group, apparently due to a side reaction. The side reaction was studied by ¹H NMR spectroscopy using PIB benzyl amine prepared from deuterated IB. Although direct evidence was not obtained, the ¹H NMR spectrum of the debenzylated product indicates that elimination of the amine group from the α carbon and elimination of a methyl group from the β carbon take place simultaneously, presumably due to the crowded nature of the neopentyl-type structure. The primary amine functional PIB was converted into PIB acetyl amide and imide via acylation with acetyl chloride. The products were analyzed by IR, ¹H NMR, and ¹³C NMR spectroscopy.     

Unexpected hydrodeiodo Sonogashira-Heck-Casser coupling reaction of 2,2'-diiodobiphenyls with acetylenes

2,2'-Diiodobiphenyl-4,4'-dicarboxylic acid dimethyl ester (3) undergoes either a ring-closure reaction with phenylacetylene to give 4 or hydrodeiodo phenylethynylation to give 5 under the catalytic conditions of Pd(OAc)(2)/CuI/phosphine in amines. In these reactions, the amine and the phosphine ligands play important roles in controlling the reactivity. Among the ligands we used, tris(o-tolyl)phosphine is the best ligand for hydrodeiodo phenylethynylation, while the bidentate phosphine ligand retards both of the reactions. On the basis of our results, we propose that 5 is formed through a fast hydrodeiodination, followed by a Sonogashira phenylethynylation. The results of the deuterium labeling experiments show that proton exchange between the acetylenic proton and the alkyl protons of amine occurs effectively under the reaction conditions. In addition, the hydrogen that replaces the iodide in the hydrodeiodination process arises mainly from the acetylenic proton.     

Cationic polyelectrolytes. I. Soluble polymers prepared from reaction of chloromethylated polystyrene with tris(2-hydroxythyl)amine

The reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine in N,N-dimethylformamide is described for the conditions to prepare soluble reaction products. The groups of the quaternary ammonium salt, which appear in the first stage of the reaction, transpose to the amino-ether groups. The reaction was followed by elementary analysis, IR and ¹H-NMR spectra, and viscosimetric measurements for nondialyzed and dialyzed samples. The presence of the tertiary amine groups on obtained polymers was also shown by titration. The polymers from the reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine reacted easily with benzyl chloride.     

Polymeric nucleophiles and cosolvents. The reactivity of poly(ethylene glycol) and its derivatives with benzyl bromide under solvolytic conditions

Pseudo first-order rate constants for the solvolytic displacement of benzyl bromide in 100% ethanol and in 80 and 60% aqueous ethanol (v/v) are reported. The effect of adding poly(ethylene glycol) (PEG) and PEG dithiols and diamines to the solvolytic solutions has been studied. The solvolytic rates are mildly retarded on adding PEG, MW 950, or PEG dimercaptoacetate, MW 548 or 748 (at a concentration of about 8% of the polymer) to reactions in absolute ethanol. In 80% ethanol, however, a rate acceleration by the polymers was observed, with the thiols exhibiting the largest effects. PEG di(3-mercaptopropionate) reacts slightly faster than the PEG dimercaptoacetates, but liberated acid affects the former's reaction. Three molecular weights of primary diamines structurally derived from propylene oxide-capped PEG were evaluated and found to increase solvolytic rates of benzyl bromide significantly. Kinetic evaluation and comparisons with reactions containing equivalent amine groups per gram in an appropriate model (ethanolamine) revealed that the polymer's amine groups are actively involved nucleophilically. Grunwald-Winstein plots and second-order rate constants revealed that the polymeric diamines caused the benzyl bromide to undergo polymer-assisted displacement in all solvent compositions. Since it was noted that the second-order rates increased as the PEG amine molecular weight increased, it appears that the PEG framework may be assisting the reaction.     

Imino ene reaction catalyzed by ytterbium(III) triflate and TMSCl or TMSOTf

A novel combined system of Yb(OTf)(3) with TMSCl or TMSOTf catalyzed an imino ene reaction. The reaction of N-tosylbenzaldimine (1) with alpha-methylstyrene (2) proceeded smoothly to give homoallylic amine 3 in the presence of a catalytic amount of Yb(OTf)(3) and TMSCl. This catalytic system was successfully applied to the imino ene reactions of various aldimines with alkenes. This new imino ene reaction provides a unique method for the three-component coupling reaction of an aldehyde, tosylamide, and alpha-methylstyrene in the presence of Yb(OTf)(3) and TMSOTf, to give the corresponding homoallylic amine.     

Visible-light-driven external-photocatalyst-free alkylative carboxylation of alkenes with CO_2

Herein, we report a novel protocol for visible-light-driven alkylative carboxylation of alkenes with CO_2 in the absence of external photocatalyst. Under the irradiation of visible light, a variety of 4-alkyl-1,4-dihydropyridines(alkyl-DHPs) serve as not only alkyl radical precursors but also photoexcited reductants probably with the potential to reduce benzyl radicals. Several styrenes and acrylates are applicable in this reaction to give structurally diverse carboxylic acids in good to excellent yields. These reactions feature mild reaction conditions(1 atm of CO_2, room temperature, visible light, photocatalyst-and transition metalfree), good functional group tolerance, easy scalability, as well as high regio-, and chemo-selectivity. Mechanistic investigations provide evidence that alkyl radical, benzyl radical and carbanion might be involved in this reaction, providing a novel strategy for CO_2 utilization.     

Highly enantioselective 1,3-dipolar cycloaddition reactions of 2-benzopyrylium-4-olate catalyzed by chiral Lewis acids

We have found that significant levels of enantioselectivity are obtained in the 1,3-dipolar cycloadditions of 2-benzopyrylium-4-olate using chiral 2,6-bis(oxazolinyl)pyridine (Pybox)-rare earth metal triflate complexes as chiral Lewis acid catalysts. The reactions with benzyloxyacetaldehyde derivatives catalyzed by Sc(III)-Pybox-i-Pr (10 mol %) proceeded to give endo-adducts selectively with high enantioselectivity (up to 93% ee). The reaction with benzyl pyruvate under similar conditions gave an exo-adduct selectively with 87% ee. In the reaction with 3-acryloyl-2-oxazolidinone, Yb(III)-Pybox-Ph was found to be effective in providing an exo-adduct with extremely high enantioselectivity (98% ee).     

Asymmetric Conjugate Addition of Benzofuran‐2‐ones to Alkyl 2‐Phthalimidoacrylates: Modeling Structure–Stereoselectivity Relationships with Steric and Electronic Parameters

A highly predictive model to correlate the steric and electronic parameters of tertiary amine thiourea catalysts with the stereoselectivity of Michael reactions of 3‐substituted benzofuranones and alkyl 2‐phthalimidoacrylates is described. As predicted, new 3,5‐bis(trifluoromethyl)benzyl‐ and methyl‐substituted tertiary amine thioureas turned out to be highly suitable catalysts for this reaction and enabled the synthesis of enantioenriched α‐amino acid derivatives with 1,3‐nonadjacent stereogenic centers.     

Application of peptidyl radicals into a new radical cascade leading to unsaturated gamma-lactams

Radical cyclization of dipeptides 1a-h proceeds smoothly to give five- and seven-membered rings in good to moderate total yields using Stork's catalytic tin hydride method. A radical is generated on a protecting group and translocated to the peptide moiety. Following a cyclization reaction, the vinyl radical can abstract hydrogen from a benzyl group on an amine, which results in elimination of the protected amine group. Encouraging results have notably been obtained with amino acids other than glycine.     

One pot,three component 1,3 dipolar cycloaddition: Regio and diastereoselective synthesis of spiropyrrolidinyl indenoquinoxaline derivatives

A competent and highly discriminating one-pot synthesis of highly diversified novel functionalized indenoquinoxalone grafted spiropyrrolidine linked chromene-3-carbonitrile conjugates accumulating three pharmocophoric cores, heterocyclic indenoquinoxalone, pyrrolidines and chromene-3-carbonitrile in a single molecular framework by means of 1,3-dipolar cycloaddition reaction between indenoquinoxalone, proline/benzyl amine and chromene-3-carbonitrile in ethanol under classical and microwave conditions is described. The three component 1,3-dipolar cycloaddition reaction proceeds via in situ generation of azomethine ylides by the decarboxylative condensation of indenoquinoxalone with proline/benzyl amine and their selectivity towards the endo cyclic double bonds of dipolarophile (chromene-3-carbonitrile) leading to the formation of highly functionalised regio- and diastereoselective molecular hybrids. This methodology exemplifies the green chemistry protocol such as mild reaction conditions, high yields, one-pot procedure and operational simplicity.