Towards a second generation of ionic liquid matrices (ILMs) for MALDI-MS of Peptides, proteins, and carbohydrates

Second generation ionic liquid matrices are developed, examined, and tested. They have shown a wide mass detection range (<1000 Da to >270,000 Da) for proteins and peptides with greater S/N ratios than solid matrices. These ionic liquid matrices also exhibit the ability to effectively ionize proteins of large mass without disrupting noncovalent interactions between monomers. Both the anionic and cationic moieties have been varied systematically to find an ionic liquid matrix with the best physical properties, analyte signal intensity, and widest mass detection range. It was determined that both the proton affinity and pK_a of the cation have a large effect on the ionic liquid matrices’ ability to effectively ionize the analyte. The ionic liquid matrices can be used to detect polysaccharides with fewer degradation products than solid matrices. N,N-diisopropylethylammonium α-cyano-4-hydroxycinnamate and N-isopropyl-N-methyl-t-butylammonium α-cyano-4-hydroxycinnamate were the best matrices for proteins and peptides, while N,N-diisopropylethylammonium α-cyano-4-hydroxycinnamate and N,N-diisopropylethylammonium ferulate were the best matrices for carbohydrates.     

Volumetric and Viscometric Studies of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-Bis(salicylaldehyde)-1,3-diaminopropane Schiff Base (Salpr) in Ionic Liquid + DMF solutions

The apparent molar volumes and viscosities of N,N′-bis(salicylaldehyde)-1,3-diaminopropane Schiff base (Salpr) have been determined in ionic liquid {1-pentyl-3-methylimidazolium bromide ([PnMIm]Br)} + N,N-dimethylformamide (DMF) solutions at 298.15 K from density and viscosity measurements using a vibrating tube densimeter and übbelohde type viscometer, respectively. These data have been used to calculate standard partial molar volumes, V_f ⁰V_{\phi} ^{0}, transfer partial molar volumes, Δ_tr V ⁰, and viscosity B-coefficients of the solutions. The transfer partial molar volumes are negative, and decrease with increasing the concentration of ionic liquid for all of the investigated solutions. It found that this ionic liquid interacts strongly with the Schiff base (Salpr) and has desolvation effect on the Schiff base molecules.     

1,1,3,3‐N,N,N′,N′‐Tetramethylguanidinium Trifluoroacetate Ionic Liquid–Promoted Efficient One‐Pot Synthesis of Trisubstituted Imidazoles

Trisubstituted imidazoles have been synthesized in very short reaction times with excellent yields in the presence of 1,1,3,3‐N,N,N′,N′‐tetramethylguanidinium trifluoroacetate as an ionic liquid at 100°C. The ionic liquid can be recycled for subsequent reactions without any appreciable loss of efficiency.     

Ionic vibrational breathing mode of metallic clusters

The energy of the vibrational mode with spherical symmetry, in which the ionic cores oscillate in the radial direction around the equilibrium geometry (ionic breathing mode) is calculated for trivalent (Al_N, 2≤N≤50) and monovalent (Na_N, 2≤N≤73; Cs_N, 2≤N≤74) metallic clusters. The ground-state total energy is calculated using density functional theory, with a spherically averaged pseudopotential to describe the ion–electron interaction and optimizing the geometry by the simulated annealing technique. The energy of the ionic mode is calculated by diagonalization of the dynamical matrix including the electronic relaxation in the linear response approximation. The compressibility and bulk modulus of the metallic cluster are obtained from the energies of the monopole oscillations. These energies present a linear behavior on the inverse of the cluster radius, which is analyzed using a semiclassical liquid drop mass formula for the total energy of the clusters and a scaling model. The values of the vibrational frequencies present electronic shell closing effects for the three metals.©1997 John Wiley & Sons, Inc.     

Single-walled carbon nanotubes for improved enantioseparations on a chiral ionic liquid stationary phase in GC

In order to investigate whether the use of single-walled carbon nanotubes can improve enantioseparations on an ionic liquid stationary phase, a chiral ionic liquid, (R)-N,N,N-trimethyl-2-aminobutanol-bis(trifluoromethanesulfon)imidate, was synthesized. Two capillary columns, one containing the chiral ionic liquid and the other containing the single-walled carbon nanotubes and the chiral ionic liquid, were then prepared for GC. The results of the separations achieved with these columns show that coating the chiral ionic liquid stationary phase onto the capillary column containing single-walled carbon nanotubes improves the enantioselectivety of the chiral ionic liquid. This work indicates that using single-walled carbon nanotubes in this manner enables the application range of such GC chiral separations to be extended.     

New ionic liquid for inorganic cations analysis by capillary electrophoresis: 2-hydroxy- N , N , N -trimethyl-1-phenylethanaminium bis(trifluoromethylsulfonyl)imide (phenylcholine NTf2)

The potentialities of new ionic liquids (ILs) based on choline were evaluated as an electrophoretic medium in capillary electrophoresis for the analysis of alkaline and alkaline earth cations (Li⁺, K⁺, Na⁺, Cs⁺, Mg²⁺, Ba²⁺, Ca²⁺, and Sr²⁺) with indirect UV detection. Two types of capillaries were tested: an untreated fused silica and fused silica coated with a film of polyvinylalcohol. The coated capillary proved to be the best adapted for the metal ions studied. Moreover, it appeared that the nature of the ionic liquid anion influenced the baseline stability, and the bis(trifluoromethylsulfonyl) imide (NTf₂ ⁻) anion seemed to be the most efficient. These preliminary studies led us to synthesize a new ionic liquid, 2-hydroxy-N,N,N-trimethyl-1-phenylethanaminium NTf₂ (phenylcholine NTf₂). This liquid was able to act as the running electrolyte and probe, generating the background signal in indirect UV light and consequently simplifying the electrophoretic medium. Excellent baseline stability, good reproducibility, as well as good sensitivity of detection were obtained with this new ionic liquid. Thus, 510,000 plates/meter for Li⁺ with 40 mM IL were successfully obtained. The optimal concentration of IL was 20 mM with a detection limit ranging from 28 μg L⁻¹ for Li⁺ to 1,000 μg L⁻¹ for Cs⁺. This method (phenylcholine NTf₂ with polyvinylalcohol capillary) was applied to analyze different commercial source and mineral waters. Finally, the potentiality of this ionic liquid in nonaqueous capillary electrophoresis was explored. The use of phenylcholine NTf₂ with a fused silica capillary, in pure methanol medium and in the presence of acetic acid, made it possible to obtain separation selectivity different from that obtained in aqueous medium.     

1,3‐Di‐n‐butylimidazolium tribromide‐mediated chemoselective oxidative cyclization of benzothiazoyl carbaimides: A novel approach toward the synthesis of N‐bis‐benzothiazole derivatives

4‐(N,N‐Dimethylamino)pyridine is found to be an efficient catalyst for the synthesis of benzothiazoyl carbaimide derivatives using 2‐aminobenzothiazoles and phenylisothiocyanates, which on treatment with ionic liquid [bbim][Br₃] at 70°C afforded exclusive formation of N‐bis‐benzothiazole derivatives in good yield. J. Heterocyclic Chem., (2012).     

Green and Efficient Protocol for the Synthesis of N-(2-Hydroxyethyl)anilines by the Alkylation Reaction in Ionic Liquid

A green and efficient protocol for the synthesis of N-(2-hydroxyethyl)anilines by the selective alkylation reaction in ionic liquid [BMIM]BF₄ (1-butyl-3-methylimidazolium tetrafluoroborate) has been developed, eliminating the need for toxic and expensive catalysts and volatile organic solvents. The effects of the amount of ionic liquid, temperature, time, and substrate structure on the reaction were investigated. The conversion and selectivity of N-(2-hydroxyethyl)anilines obtained in ionic liquid [BMIM]BF₄ are significantly increased in comparison to those traditional methods. Furthermore, the ionic liquid could be easily separated and reused at least five times. It provided a simple and efficient alternative way for the industrial synthesis of N-(2-hydroxyethyl)anilines.     

A Dicationic Ruthenium Alkylidene Complex for Continuous Biphasic Metathesis Using Monolith‐Supported Ionic Liquids

A dicationic ruthenium–alkylidene complex [Ru(dmf)₃(IMesH₂)(?CH‐2‐(2‐PrO)‐C₆H₄)][(BF₄)₂] ( 1 ; IMesH₂=1,3‐dimesitylimidazolin‐2‐ylidene) has been prepared and used in continuous metathesis reactions by exploiting supported ionic‐liquid phase (SILP) technology. For these purposes, ring‐opening metathesis polymerization (ROMP)‐derived monoliths were prepared from norborn‐2‐ene, tris(norborn‐5‐ene‐2‐ylmethyloxy)methylsilane, and [RuCl₂(PCy₃)₂(CHPh)] (Cy=cyclohexyl) in the presence of 2‐propanol and toluene and surface grafted with norborn‐5‐en‐2‐ylmethyl‐N,N,N‐trimethylammonium tetrafluoroborate ([NBE‐CH₂‐NMe₃][BF₄]). Subsequent immobilization of the ionic liquid (IL), 1‐butyl‐2,3‐dimethylimidazolium tetrafluoroborate ([BDMIM][BF₄]), containing ionic catalyst 1 created the SILP catalyst. The use of a second liquid transport phase, which contained the substrate and was immiscible with the IL, allowed continuous metathesis reactions to be realized. High turnover numbers (TONs) of up to 3700 obtained in organic solvents for the ring‐closing metathesis (RCM) of, for example, N,N‐diallyltrifluoroacetamide, diethyl diallylmalonate, diethyl di(methallyl)malonate, tert‐butyl‐N,N‐diallylcarbamate, N,N‐diallylacetamide, diphenyldiallylsilane, and 1,7‐octadiene, as well as in the self‐metathesis of methyl oleate, could be further increased by using biphasic conditions with [BDMIM][BF₄]/heptane. Under continuous SILP conditions, TONs up to 900 were observed. Due to the ionic character of the initiator, catalyst leaching into the transport phase was very low (<0.1 %). Finally, the IL can, together with decomposed catalyst, be removed from the monolithic support by flushing with methanol. Upon reloading with [BDMIM][BF₄]/ 1 , the recycled support material again qualified for utilization in continuous metathesis reactions.     

Pyrrolidinium-based ionic liquids as electrolytes for lithium batteries: A Computational Study

Electrochemical windows (ECWs) of the cyclic ammonium based ionic liquids formed by the combination of two common pyrrolidinium cations—N,N-butylmethyl pyrrolidinum(P_yr14) and N,N-hexylmethyl pyrrolidinium(P_yr16) and five anions—dicyanamide, trifluoroacetate, fluoromethane sulfonate, bis((trifluoromethylsulfonyl)imide, and bis(fluorosulfonyl)imide were investigated. The ECW of each ionic liquid was obtained from the oxidation and reduction potentials of these ionic liquids with respect to a Li⁺/Li reference electrode by using thermodynamic cycle method. The work reveals that the ECWs of these ionic liquids are solely decided by the HOMO energy of pairing anions. The ECWs were also computed using HOMO-LUMO method employing Møller-Plesset perturbation theory to the second order and M06L methods with a basis set of 6-31 + G(d, p). The ECW computed using M06L functional with an extended basis set of 6-311++G(d, p) showed better agreement with experimental values suggesting accurate computation of ECW is possible at lower computational cost.     

Preparation of Ionic Liquid‐based Vilsmier Reagent from Novel Multi‐purpose Dimethyl Formamide‐like Ionic Liquid and Its Application

In continuation of research to explore the applied potential of DMF‐like ionic liquid, the ionic liquid version of N,N‐dimethyliminiumchloride (Vilsmier reagent) has been synthesized from DMF‐like ionic liquid and tested effectively for its capacity to achieve more useful organic transformations. The results show that DMF‐like ionic liquid is world's first task specific ionic liquid which has catalyzed numerous diverse type of reaction and is multipurpose in its application. Thus a new term for this DMF‐like ionic liquid has been coined that is DMF‐like "multipurpose" ionic liquid.     

Electrochemistry of Zirconium Tetrachloride in the Ionic Liquid N‐Butyl‐N‐methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide: Formation of Zr(III) and Exploitation of ZrCl4 as a Facile Ionic Liquid Drying Agent

The electrochemistry of zirconium tetrachloride in the ionic liquid N‐butyl‐N‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide has been studied, and the one electron reduction is proved by chronoamperometry. Furthermore, we report the application of ZrCl₄ as a facile and general ionic liquid drying agent for use in voltammetry.     

A Roadmap to Uranium Ionic Liquids: Anti‐Crystal Engineering

In the search for uranium‐based ionic liquids, tris(N,N‐dialkyldithiocarbamato)uranylates have been synthesized as salts of the 1‐butyl‐3‐methylimidazolium (C₄mim) cation. As dithiocarbamate ligands binding to the UO₂²⁺ unit, tetra‐, penta‐, hexa‐, and heptamethylenedithiocarbamates, N,N‐diethyldithiocarbamate, N‐methyl‐N‐propyldithiocarbamate, N‐ethyl‐N‐propyldithiocarbamate, and N‐methyl‐N‐butyldithiocarbamate have been explored. X‐ray single‐crystal diffraction allowed unambiguous structural characterization of all compounds except N‐methyl‐N‐butyldithiocarbamate, which is obtained as a glassy material only. In addition, powder X‐ray diffraction as well as vibrational and UV/Vis spectroscopy, supported by computational methods, were used to characterize the products. Differential scanning calorimetry was employed to investigate the phase‐transition behavior depending on the N,N‐dialkyldithiocarbamato ligand with the aim to establish structure–property relationships regarding the ionic liquid formation capability. Compounds with the least symmetric N,N‐dialkyldithiocarbamato ligand and hence the least symmetric anions, tris(N‐methyl‐N‐propyldithiocarbamato)uranylate, tris(N‐ethyl‐N‐propyldithiocarbamato)uranylate, and tris(N‐methyl‐N‐butyldithiocarbamato)uranylate, lead to the formation of (room‐temperature) ionic liquids, which confirms that low‐symmetry ions are indeed suitable to suppress crystallization. These materials combine low melting points, stable complex formation, and hydrophobicity and are therefore excellent candidates for nuclear fuel purification and recovery.     

N-Hydroxyphthalimide-Catalyzed Oxidative Production of Phthalic Acids from Xylenes Using O2/HNO3 in an Ionic Liquid

A simple and mild process for oxidation of xylenes to phthalic acids using N-hydroxyphthalimide/O₂/HNO₃ in an ionic liquid, wherein the ionic liquid can be successfully recovered and reused, is described.     

Modulating the Solubilities of Ionic Liquid Components in Aqueous–Ionic Liquid Biphasic Systems: A Q‐NMR Investigation

Aqueous–ionic liquid (A–IL) biphasic systems have been examined in terms of deuterated water, acid, and IL cation and anion mutual solubilities in the upper (water‐rich, in mole fraction) and lower phase of aqueous/IL biphasic systems at ambient temperature. The biphasic mixtures were composed of deuterated acids of various concentrations (mainly DCl, DNO₃, and DClO₄ from 10^?2 to 10^?4 M ) and five ionic liquids of the imidazolium family with a hydrophobic anion (CF₃SO₂)₂N^?, that is, [C₁C_nim][Tf₂N], (n=2, 4, 6, 8 and 10). The analytical techniques applied were ¹H NMR, ¹⁹F NMR, Karl–Fischer titration, pH potentiometry for IL cations and anions, and water and acid determination. The effects of the ionic strength (μ=0.1 M NaCl and NaNO₃ as well as μ=0.1 M , 0.2 M and 0.4 M NaClO₄, according to the investigated acid), the nature of the IL cation, and the nature of the mineral acid on the solubilities of the (D₂O, D⁺, Tf₂N^?, C₁C_nim⁺) entities in the lower or upper phases were determined. The addition of sodium perchlorate was found to enhance the Tf₂N^? solubility while inhibiting the solubility of the ionic liquid cation. Differences in IL cation and anion solubilities of up to 42 mM were evidenced. The consequences for the characterization of the aqueous biphasic system, the solvent extraction process of the metal ions, and the ecological impact of the ILs are discussed.     

Synthesis of traditional and ionic polymethacrylates by anion catalyzed group transfer polymerization

The hydrophobic ionic liquid 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide was successfully used as solvent in group transfer polymerization of traditional methacrylates (methyl methacrylate, n‐butyl methacrylate, and benzyl methacrylate) and of ionic liquid methacrylates (ILMAs). This demonstrates that this ionic liquid makes reaction conditions, which do not require the use of ultra‐dried solvents. The ILMAs were N‐[2‐(methacryloyloxy)ethyl]‐N,N‐dimethyl‐N‐alkylammonium bis(trifluoromethylsulfonyl)imides bearing methyl, ethyl, propyl, butyl, or hexyl substituents. Increasing size of the alkyl substituent at the cation results in decreasing glass transition temperature in case of both ionic liquid methacrylates and polymers derived of them. Furthermore, the glass transition temperature is significantly higher for these polymers compared with the ionic liquid methacrylates, and the effect of glass transition temperature reduction with increasing size of the alkyl substituent is stronger for the polymers. A mechanism was proposed explaining the catalytic function of the ionic liquid used as solvent for polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2849–2859     

Diels-Alder Reactions of N-Functionalized Acryloyl α-Pyrrolidone Derivatives Using FeCl3·6H2O as an Efficient Catalyst under Solvent-free Conditions

Diels-Alder reactions of N-functionalized acryloyl α-pyrrolidone derivatives were investigated, which were catalyzed by FeCl3·6H2O as an efficient catalyst under solvent-free conditions at room temperature. The corresponding cycloadducts with functionalized-pyrrolidone were prepared in high yield with high stereoselectivity by a green chemistry procedure. N-Functionalized acryloyl pyrrolidone derivatives, a kind of pyrrolidone-functionalized chelating α,β-unsaturated ketone usable as a dienophile in Diels-Alder reaction, were synthesized by N-acylation procedure in ionic liquid as a novel synthetic method.     

Manganese dioxide and N,N′,N″‐trihydroxyisocyanuric acid: a novel and recyclable catalytic system for aerobic oxidation of toluene derivatives in PEG‐1000‐based dicationic acidic ionic liquid

N,N′,N″‐trihydroxyisocyanuric acid (THICA) with MnO₂ promotes the aerobic oxidation of toluene derivatives to corresponding acids in PEG‐1000‐based dicationic acidic ionic liquid (PEG₁₀₀₀–DAIL). It is demonstrated that THICA/MnO₂ is very active and selective and several toluene derivatives are efficiently oxidized to corresponding acids under mild conditions. Both the catalyst and PEG₁₀₀₀–DAIL can be reused after simple separation. A plausible mechanism is also proposed based on the experimental observations. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of symmetrical and unsymmetrical 3,3-di(indolyl)indolin-2-ones under controlled catalysis of ionic liquids

Three ionic liquids, [BMIM][BF₄] doped with 60 mol % of LiCl ([BMIM][BF₄]-LiCl), N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT), and N,N,N,N-tetramethylguanidinium triflate (TMGT_f) were found useful as catalyst solvents for controlled 3-indolylation of isatins. Our investigation revealed that the reaction between isatin and indoles in [BMIM][BF₄]-LiCl or TMGT_f media stops at the step of addition of the two components providing 3-indolyl-3-hydroxyindolin-2-ones while the ionic liquid TMGT runs the reaction further through accompanying Friedel-Crafts substitution to afford symmetrical 3,3-di(indol-3-yl)indolin-2-ones. To take advantage of the difference between the effects of these ionic liquids on the reaction progress, we planned a two-step protocol for the efficient synthesis of unsymmetrical 3,3-di(indol-3-yl)indolin-2-ones.     

Effects of Ionic Liquid [Me3NC2H4OH]+[ZnCl3]− on γ‐Radiation Polymerization of Methyl Methacrylate in Ethanol and N,N‐Dimethylformamide

Summary: Radiation‐induced polymerization of methyl methacrylate (MMA) in ethanol (EtOH) and N,N‐dimethylformamide (DMF) in the presence of ionic liquid [Me₃NC₂H₄OH]⁺[ZnCl₃]⁻ is reported. A substantial increase in monomer conversion and molecular weight is observed at room‐temperature ionic liquid (RTIL) >60 vol.‐%, and the resulting PMMA has a broad multimodal MWD. A clear difference in the MWD pattern is noted between EtOH/RTIL and DMF/RTIL systems, probably due to the complicated interactions between the solvent and ionic liquid.

Gel permeation chromatography traces of poly(methyl methacrylate) obtained by radiation polymerization in EtOH/RTIL and DMF/RTIL mixed solvent. Organic/RTIL (v/v): 1) 100:0; 2) 80:20; 3) 60:40; 4); 40:60; 5) 0:100.