Heterogenization of a Modified Grubbs–Hoveyda Catalyst on a ROMP‐Derived Monolithic Support

A ring‐opening metathesis polymerization‐ (ROMP‐) based monolith was synthesized using a Grubbs' first generation catalyst. The living termini were used for surface grafting of norborn‐5‐ene‐2‐ylmethyl hexafluoroglutarate. The free carboxylic acid groups of the graft polymer were converted into the corresponding silver salt and reacted with the Grubbs–Hoveyda catalyst [RuCl₂(CH (2‐iPrO )C₆H₄)(IMesH₂)] (IMesH₂ = 1,3‐bis(2,4,6‐trimethylphenyl)‐4,5‐dihydroimidazol‐2‐ylidene) to yield a stable heterogeneous version of this catalyst for use in ring‐closing metathesis (RCM) under continuous flow conditions.

The monolith‐supported Grubbs–Hoveyda catalyst.     

Aerobic and Electrochemical Oxidative Cross‐Dehydrogenative‐Coupling (CDC) Reaction in an Imidazolium‐Based Ionic Liquid

The ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate [BMIm][BF₄] has demonstrated high efficiency when applied as a solvent in the oxidative nitro‐Mannich carbon? carbon bond formation. The copper‐catalyzed cross‐dehydrogenative coupling (CDC) between N‐phenyltetrahydroisoquinoline and nitromethane in [BMIm][BF₄] occurred with high yield under the described reaction conditions. Both the ionic liquid and copper catalyst were recycled nine times with almost no lost of activity. The electrochemical behavior of the tertiary amine substrate and β‐nitroamine product was investigated employing [BMIm][BF₄] as electrolyte solvent. The potentiostatic electrolysis in ionic liquid afforded the desired product with a high yield. This result and the cyclic voltammetric investigation provide a better understanding of the reaction mechanism, which involves radical and iminium cation intermediates.     

K2CO3/H2O in [omim][BF4] Ionic Liquid: A Green Medium for Efficient Room‐Temperature Synthesis of N‐Substituted 1,4‐Benzoxazin‐3‐ones

A medium consisting of K₂CO₃ and H₂O in [omim][BF₄] ionic liquid (IL) was used to synthesize N‐substituted 2H‐benzo[b][1,4]oxazin‐3(4H)‐one derivatives from their corresponding o‐aminophenols and 2‐bromoalkanoates. As a result, chemoselective formation of benzoxazinones in high yields has been observed at room temperature. After the reactions and separation of the products, the IL was recovered and successfully reused in subsequent reactions without significant loss of activity.     

Synthesis of symmetrical and unsymmetrical 3,3-di(indolyl)indolin-2-ones under controlled catalysis of ionic liquids

Three ionic liquids, [BMIM][BF₄] doped with 60 mol % of LiCl ([BMIM][BF₄]-LiCl), N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT), and N,N,N,N-tetramethylguanidinium triflate (TMGT_f) were found useful as catalyst solvents for controlled 3-indolylation of isatins. Our investigation revealed that the reaction between isatin and indoles in [BMIM][BF₄]-LiCl or TMGT_f media stops at the step of addition of the two components providing 3-indolyl-3-hydroxyindolin-2-ones while the ionic liquid TMGT runs the reaction further through accompanying Friedel-Crafts substitution to afford symmetrical 3,3-di(indol-3-yl)indolin-2-ones. To take advantage of the difference between the effects of these ionic liquids on the reaction progress, we planned a two-step protocol for the efficient synthesis of unsymmetrical 3,3-di(indol-3-yl)indolin-2-ones.     

Imidazolium ionic liquids with short polyoxyethylene chains

It has been observed by us earlier that imidazolium ionic liquids ([bmim][BF₄] react with paraformaldehyde giving in nearly quantitative yield imidazolium ionic liquids substituted at 2‐position with hydroxymethyl group ([bhmim][BF₄]). In this article, we describe the application of those ionic liquids (after converting hydroxyl group into alkoxide anion by reaction with sodium hydride) as initiators for anionic polymerization of ethylene oxide (EO). Up to DP_n ～ 30 polymerization proceeds without side reactions, and the product is exclusively low‐molecular‐weight polyoxyethylene containing imidazolium head group (POE‐IL) with DP_n equal to [EO]/[bhmim] ratio. By increasing [EO]/[bhmim] ratio further, side reaction start to interfere, and macromolecules that does not contain imidazolium head groups are also formed, as evidenced by analysis of MALDI TOF spectra. Blending of POE‐IL with high‐molecular‐weight POE leads to significant reduction of crystallinity of POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6961–6968, 2008     

离子液体-水介质中离子液体负载TEMPO催化选择氧化合成脂肪醇羟基芳香醛和酮

由于脂肪醇羟基和苄醇羟基具有相同的氧化反应活性,所以当分子内同时含有脂肪醇羟基和苄醇羟基时,很难选择氧化苄醇羟基合成含脂肪醇羟基的芳香醛或酮。本文报道了在离子液体-水介质中,NCS/NaBr/IL-TEMPO（离子液体负载TEMPO）催化氧化合成含有脂肪醇羟基的芳香醛、酮的方法,反应条件温和,选择性好,收率高,且离子液体和催化剂可以循环使用。     

Self‐assembly and lower critical solution temperature properties of supramolecular block copolymer/ionic liquid complexes depending on the alkyl chain length of imidazolium rings

We report the liquid crystalline (LC) assembly and lower critical solution temperature (LCST) properties of wedge‐shaped block copolymer (BCP)/1‐alkyl‐3‐methylimidazolium tetrafluoroborate ([C_nMIM][BF₄], n = 2, 4, 6) complexes ( 1 – 3 ) depending on the alkyl chain length of the ionic liquids (ILs). In contrast to the crystalline BCP, all of the ionic samples showed LC phases. 1 with [C₂MIM][BF₄] exhibited a hexagonal columnar phase, and 3 with [C₆MIM][BF₄] exhibited a gyroid phase. Interestingly, a temperature‐dependent transformation from columnar phase to gyroid phase was revealed for 2 with [C₄MIM][BF₄]. The phase difference may be explained by the supramolecular shape change that was dependent on the alkyl chain length of the ILs. The LCST behavior was characterized using the differential scanning calorimetry, turbidity observations, and the X‐ray diffraction techniques. Notably, the primary d‐spacing began to decrease at the clouding temperature (T_c). 3 showed the highest T_c at 130 °C, which is greater than the temperature of the order‐to‐disorder transition. The results demonstrate that the subtle variation in the IL structure affects the morphological and LCST properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3587–3596     

Thermoresponsive poly(ionic liquid): Controllable RAFT synthesis,thermoresponse, and application in dispersion RAFT polymerization

The thermoresponsive poly(ionic liquid) of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate] trithiocarbonate (P[VBMI][BF₄]‐TTC) showing the soluble‐to‐insoluble phase transition in the methanol/water mixture at the upper critical solution temperature (UCST) was synthesized by solution RAFT polymerization and the synthesized P[VBMI][BF₄]‐TTC was employed as macro‐RAFT agent to mediate the RAFT polymerization under dispersion condition to afford the thermoresponsive diblock copolymer nanoparticles of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate]‐b‐polystyrene (P[VBMI][BF₄]‐b‐PS). The controllable solution RAFT polymerization was achieved as indicated by the linearly increasing polymer molecular weight with the monomer conversion and the narrow molecular weight distribution. The P[VBMI][BF₄]‐TTC macro‐RAFT agent mediated dispersion polymerization afforded the P[VBMI][BF₄]‐b‐PS nanoparticles, the size of which was uncorrelated with the polymerization degree of the P[VBMI][BF₄] block. Several parameters including the polymerization degree, the polymer concentration and the water content in the solvent of the methanol/water mixture were found to be correlated with the UCST of the poly(ionic liquid). The synthesized poly(ionic liquid) is believed to be a new thermos‐responsive polymer and will be useful in material science. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 945–954     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Reverse ATRP process of acrylonitrile in the presence of ionic liquids

An ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), was first used as the solvent in azobisisobutyronitrile (AIBN)‐initiated reverse atom transfer radical polymerization (RATRP) of acrylonitrile with FeCl₃/succinic acid (SA) as the catalyst system. The polymerization in [C₄mim][BF₄] proceeded in a well‐controlled manner as evidenced by kinetic studies. Compared with the polymerization in bulk, the polymerization in [C₄mim][BF₄] not only showed the best control of molecular weight and its distribution but also provided rather rapid reaction rate with the ratio of [C₄mim][BF₄] at 200:1:2:4. The polymerization apparent activation energies in [C₄mim][BF₄] and bulk were calculated to be 48.2 and 55.7 kJ mol^?1, respectively. Polyacrylonitrile obtained was successfully used as a macroinitiator to proceed the chain extension polymerization in [C₄mim][BF₄] via a conventional ATRP process. [C₄mim][BF₄] and the catalyst system could be easily recycled and reused after simple purification and had no effect on the living nature of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2701–2707, 2008     

A Fully Integrated Continuous‐Flow System for Asymmetric Catalysis: Enantioselective Hydrogenation with Supported Ionic Liquid Phase Catalysts Using Supercritical CO2 as the Mobile Phase

A continuous‐flow process based on a chiral transition‐metal complex in a supported ionic liquid phase (SILP) with supercritical carbon dioxide (scCO₂) as the mobile phase is presented for asymmetric catalytic transformations of low‐volatility organic substrates at mild reaction temperatures. Enantioselectivity of >99 % ee and quantitative conversion were achieved in the hydrogenation of dimethylitaconate for up to 30 h, reaching turnover numbers beyond 100 000 for the chiral QUINAPHOS–rhodium complex. By using an automated high‐pressure continuous‐flow setup, the product was isolated in analytically pure form without the use of any organic co‐solvent and with no detectable catalyst leaching. Phase‐behaviour studies and high‐pressure NMR spectroscopy assisted the localisation of optimum process parameters by quantification of substrate partitioning between the IL and scCO₂. Fundamental insight into the molecular interactions of the metal complex, ionic liquid and the surface of the support in working SILP catalyst materials was gained by means of systematic variations, spectroscopic studies and labelling experiments. In concert, the obtained results provided a rationale for avoiding progressive long‐term deactivation. The optimised system reached stable selectivities and productivities that correspond to 0.7 kg L ^?1 h^?1 space–time yield and at least 100 kg product per gram of rhodium, thus making such processes attractive for larger‐scale application.     

Synthesis and application of a chiral ionic liquid functionalized β‐cyclodextrin as a chiral selector in capillary electrophoresis

A novel chiral ionic liquid functionalized β‐cyclodextrin, 6‐O‐2‐hydroxpropyltrimethylammonium‐β‐cyclodextrin tetrafluoroborate ([HPTMA‐β‐CD][BF₄]), was synthesized and used as a chiral selector in capillary electrophoresis. [HPTMA‐β‐CD][BF₄] not only increased the solubility in aqueous buffer in comparison with the parent compound, but also provided a stable reversal electroosmotic flow, and the enantioseparation of eight chiral drugs was examined in phosphate buffer containing [HPTMA‐β‐CD][BF₄] as the chiral selector. The effects of the [HPTMA‐β‐CD][BF₄] concentration and the background electrolyte pH were studied. Moreover, the chiral separation abilities of β‐CD and [HPTMA‐β‐CD][BF₄] were compared and possible mechanisms for the chiral recognition of [HPTMA‐β‐CD][BF₄] are discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Supramolecular Ionic‐Liquid Gels with High Ionic Conductivity

Supramolecular ionogels were prepared by the gelation of room‐temperature ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]) with (S,S)‐bis(leucinol)oxalamide. Remarkably, the ionic conductivity of solutions and ionogels with low gelator concentrations is higher than that of neat [BMIm][BF₄]. On the basis of molecular dynamics simulations and quantum mechanical calculations, the origin of this phenomenon is attributed to the higher affinity of gelator molecules towards [BF₄]^? ions, which reduces the electrostatic attraction between [BMIm]⁺ and [BF₄]^? and thus increases their mobility. With increasing gelator concentration, the ionic conductivity decreases due to the formation of a denser gelator matrix, which hinders the pathways for ionic transport. However, even for very dense ionogels, this decrease is less than one order of magnitude relative to neat [BMIm][BF₄], and thus they can be classified as highly conductive materials with strong potential for application as functional electrolytes.     

Direct Electrochemistry and Electrocatalysis Behaviors of Glucose Oxidase Based on Hyaluronic Acid-Carbon Nanotubes-Ionic Liquid Composite Film

Multi‐walled carbon nanotubes (MWNTs) were dispersed in the ionic liquid [BMIM][BF₄] to form a uniform black suspension. Based on it, a novel glucose oxidase (GOx)‐hyaluronic (HA)‐[BMIM][BF₄]‐MWNTs/GCE modified electrode was fabricated. UV‐vis spectroscopy confirmed that GOx immobilized in the composite film retained its native structure. The experimental results of EIS indicated MWNTs, [BMIM][BF₄] and HA were successfully immobilized on the surface of GCE and [BMIM][BF₄]‐MWNTs could obviously improve the diffusion of ferricyanide toward the electrode surface. The experimental results of CV showed that a pair of well‐defined and quasi‐reversible peaks of GOx at the modified electrode was exhibited, and the redox reaction of GOx at the modified electrode was surface‐confined and quasi‐reversible electrochemical process. The average surface coverage of GOx and the apparent Michaelis‐Menten constant were 8.5×10⁻⁹ mol/cm² and 9.8 mmol/L, respectively. The cathodic peak current of GOx and the glucose concentration showed linear relationship in the range from 0.1 to 2.0 mmol/L with a detection limit of 0.03 mmol/L (S/N=3). As a result, the method presented here could be easily extended to immobilize and obtain the direct electrochemistry of other redox enzymes or proteins.     

Functional Monolithic Materials for Boronate‐Affinity Chromatography via Schrock Catalyst‐Triggered Ring‐Opening Metathesis Polymerization

Monolithic polymeric materials are prepared via ring‐opening metathesis copolymerization of norborn‐2‐ene with 1,4,4a,5,8,8a‐hexahydro‐1,4,5,8‐exo,endo‐dimethanonaphthalene in the presence of macro‐ and microporogens, that is, of n‐hexane and 1,2‐dichloroethane, using the Schrock catalyst Mo(N‐2,6‐(2‐Pr)₂‐C₆H₃)(CHCMe₂Ph)(OCMe₃)₂. Functionalization of the monolithic materials is accomplished by either terminating the living metal alkylidenes with various functional aldehydes or by post‐synthesis grafting with norborn‐5‐en‐2‐ylmethyl‐4‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)benzoate. Finally, boronate‐grafted monolithic columns (100 × 3 mm i.d.) are successfully applied to the affinity chromatographic separation of cis‐diol‐based biomolecules.     

One‐pot Synthesis of Tetrahydrobenzo[b]pyrans Catalyzed by PEG‐1000 Bridged Primary Amine Functionalized Dicationic Ionic Liquid in Water

A novel poly (ethylene glycol) bridged primary amine functionalized dicationic ionic liquid ([PA‐PEG₁₀₀₀‐DIL][BF₄]) was synthesized and characterized by ¹H‐NMR, ¹³C‐NMR, FT‐IR and ESI‐MS. The thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis indicated the high thermal stability of [PA‐PEG₁₀₀₀‐DIL][BF₄]. It was used as an efficient and recyclable catalyst for the synthesis of substituted tetrahydrobenzo[b]pyrans through a one‐pot three‐component condensation of aromatic aldehydes, malononitrile and dimedone in 86% ～ 96% yields within 10 ～ 30 min in water. This method offers several advantages such as mild reaction conditions, simple operation and environmental friendliness. Furthermore, the catalyst could be easily recovered and reused for at least five runs without obvious loss of catalytic activity.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

1,3‐Di‐n‐butylimidazolium tribromide‐mediated chemoselective oxidative cyclization of benzothiazoyl carbaimides: A novel approach toward the synthesis of N‐bis‐benzothiazole derivatives

4‐(N,N‐Dimethylamino)pyridine is found to be an efficient catalyst for the synthesis of benzothiazoyl carbaimide derivatives using 2‐aminobenzothiazoles and phenylisothiocyanates, which on treatment with ionic liquid [bbim][Br₃] at 70°C afforded exclusive formation of N‐bis‐benzothiazole derivatives in good yield. J. Heterocyclic Chem., (2012).     

Cationic versus neutral Ru(II)--N-heterocyclic carbene complexes as latent precatalysts for the UV-induced ring-opening metathesis polymerization

A series of cationic and neutral Ru^II complexes of the general formula [Ru(L)(X) (tBuCN)₄]⁺X^? and [Ru(L)(X)₂(tBuCN)₃)], that is, [Ru(CF₃SO₃){NCC(CH₃)₃}₄(IMesH₂)]⁺[CF₃SO₃]^? ( 1 ), [Ru(CF₃SO₃){NCC(CH₃)₃}₄(IMes)]⁺[CF₃SO₃]^? ( 2 ), [RuCl{NCC(CH₃)₃}₄(IMes)]⁺Cl^? ( 3 ), [RuCl{NCC(CH₃)₃}₄(IMesH₂)⁺Cl^?]/[RuCl₂{NCC(CH₃)₃}₃(IMesH₂)] ( 4 ), and [Ru(NCO)₂{NCC(CH₃)₃}₃(IMesH₂)] ( 5 ) (IMes=1,3‐dimesitylimidazol‐2‐ylidene, IMesH₂=1,3‐dimesityl‐imidazolin‐2‐ylidene) have been synthesized and used as UV‐triggered precatalysts for the ring‐opening metathesis polymerization (ROMP) of different norborn‐2‐ene‐ and cis‐cyclooctene‐based monomers. The absorption maxima of complexes 1 – 5 were in the range of 245–255 nm and thus perfectly fit the emission band of the 254 nm UV source that was used for activation. Only the cationic Ru^II‐complexes based on ligands capable of forming μ²‐complexes such as 1 and 2 were found to be truly photolatent in ROMP. In contrast, complexes 3 – 5 could be activated by UV light; however, they also showed a low but significant ROMP activity in the absence of UV light. As evidenced by ¹H and ¹³C NMR spectroscopy, the structure of the polymers obtained with either 1 or 2 are similar to those found in the corresponding polymers prepared by the action of [Ru(CF₃SO₃)₂(IMesH₂)(CH‐2‐(2‐PrO)‐C₆H₄)], which strongly suggest the formation of Ru‐based Grubbs‐type initiators in the course of the UV‐based activation process. Precatalysts that have the IMesH₂ ligand showed significantly enhanced reactivity as compared with those based on the IMes ligand, which is in accordance with reports on the superior reactivity of IMesH₂‐based Grubbs‐type catalysts compared with IMes‐based systems.