Energy landscapes of nucleophilic substitution reactions: a comparison of density functional theory and coupled cluster methods

We have carried out a detailed evaluation of the performance of all classes of density functional theory (DFT) for describing the potential energy surface (PES) of a wide range of nucleophilic substitution (SN2) reactions involving, amongst others, nucleophilic attack at carbon, nitrogen, silicon, and sulfur. In particular, we investigate the ability of the local density approximation (LDA), generalized gradient approximation (GGA), meta-GGA as well as hybrid DFT to reproduce high-level coupled cluster (CCSD(T)) benchmarks that are close to the basis set limit. The most accurate GGA, meta-GGA, and hybrid functionals yield mean absolute deviations of about 2 kcal/mol relative to the coupled cluster data, for reactant complexation, central barriers, overall barriers as well as reaction energies. For the three nonlocal DFT classes, the best functionals are found to be OPBE (GGA), OLAP3 (meta-GGA), and mPBE0KCIS (hybrid DFT). The popular B3LYP functional is not bad but performs significantly worse than the best GGA functionals. Furthermore, we have compared the geometries from several density functionals with the reference CCSD(T) data. The same GGA functionals that perform best for the energies (OPBE, OLYP), also perform best for the geometries with average absolute deviations in bond lengths of 0.06 A and 0.6 degrees, even better than the best meta-GGA and hybrid functionals. In view of the reduced computational effort of GGAs with respect to meta-GGAs and hybrid functionals, let alone coupled cluster, we recommend the use of accurate GGAs such as OPBE or OLYP for the study of SN2 reactions.     

Meta-generalized gradient approximation: explanation of a realistic nonempirical density functional

Tao, Perdew, Staroverov, and Scuseria (TPSS) have constructed a nonempirical meta-generalized gradient approximation (meta-GGA) [Phys. Rev. Lett. 91, 146401 (2003)] for the exchange-correlation energy, imposing exact constraints relevant to the paradigm densities of condensed matter physics and quantum chemistry. Results of their extensive tests on molecules, solids, and solid surfaces are encouraging, suggesting that this density functional achieves uniform accuracy for diverse properties and systems. In the present work, this functional is explained and details of its construction are presented. In particular, the functional is constructed to yield accurate energies under uniform coordinate scaling to the low-density or strong-interaction limit. Its nonlocality is displayed by plotting the factor F(xc) that gives the enhancement relative to the local density approximation for exchange. We also discuss an apparently harmless order-of-limits problem in the meta-GGA. The performance of this functional is investigated for exchange and correlation energies and shell-removal energies of atoms and ions. Non-self-consistent molecular atomization energies and bond lengths of the TPSS meta-GGA, calculated with GGA orbitals and densities, agree well with those calculated self-consistently. We suggest that satisfaction of additional exact constraints on higher rungs of a ladder of density functional approximations can lead to further progress.     

A long-range-corrected time-dependent density functional theory

We apply the long-range correction (LC) scheme for exchange functionals of density functional theory to time-dependent density functional theory (TDDFT) and examine its efficiency in dealing with the serious problems of TDDFT, i.e., the underestimations of Rydberg excitation energies, oscillator strengths, and charge-transfer excitation energies. By calculating vertical excitation energies of typical molecules, it was found that LC-TDDFT gives accurate excitation energies, within an error of 0.5 eV, and reasonable oscillator strengths, while TDDFT employing a pure functional provides 1.5 eV lower excitation energies and two orders of magnitude lower oscillator strengths for the Rydberg excitations. It was also found that LC-TDDFT clearly reproduces the correct asymptotic behavior of the charge-transfer excitation energy of ethylene-tetrafluoroethylene dimer for the long intramolecular distance, unlike a conventional far-nucleus asymptotic correction scheme. It is, therefore, presumed that poor TDDFT results for pure functionals may be due to their lack of a long-range orbital-orbital interaction.     

Comparison of DFT methods for molecular orbital eigenvalue calculations

We report how closely the Kohn-Sham highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) eigenvalues of 11 density functional theory (DFT) functionals, respectively, correspond to the negative ionization potentials (-IPs) and electron affinities (EAs) of a test set of molecules. We also report how accurately the HOMO-LUMO gaps of these methods predict the lowest excitation energies using both time-independent and time-dependent DFT (TD-DFT). The 11 DFT functionals include the local spin density approximation (LSDA), five generalized gradient approximation (GGA) functionals, three hybrid GGA functionals, one hybrid functional, and one hybrid meta GGA functional. We find that the HOMO eigenvalues predicted by KMLYP, BH&HLYP, B3LYP, PW91, PBE, and BLYP predict the -IPs with average absolute errors of 0.73, 1.48, 3.10, 4.27, 4.33, and 4.41 eV, respectively. The LUMOs of all functionals fail to accurately predict the EAs. Although the GGA functionals inaccurately predict both the HOMO and LUMO eigenvalues, they predict the HOMO-LUMO gap relatively accurately (approximately 0.73 eV). On the other hand, the LUMO eigenvalues of the hybrid functionals fail to predict the EA to the extent that they include HF exchange, although increasing HF exchange improves the correspondence between the HOMO eigenvalue and -IP so that the HOMO-LUMO gaps are inaccurately predicted by hybrid DFT functionals. We find that TD-DFT with all functionals accurately predicts the HOMO-LUMO gaps. A linear correlation between the calculated HOMO eigenvalue and the experimental -IP and calculated HOMO-LUMO gap and experimental lowest excitation energy enables us to derive a simple correction formula.     

Double-hybrid density functional theory for excited electronic states of molecules

Double-hybrid density functionals are based on a mixing of standard generalized gradient approximations (GGAs) for exchange and correlation with Hartree-Fock (HF) exchange and a perturbative second-order correlation part (PT2) that is obtained from the Kohn-Sham (GGA) orbitals and eigenvalues. This virtual orbital-dependent functional (dubbed B2PLYP) contains only two empirical parameters that describe the mixture of HF and GGA exchange (ax) and of the PT2 and GGA correlation (ac), respectively. Extensive testing has recently demonstrated the outstanding accuracy of this approach for various ground state problems in general chemistry applications. The method is extended here without any further empirical adjustments to electronically excited states in the framework of time-dependent density functional theory (TD-DFT) or the closely related Tamm-Dancoff approximation (TDA-DFT). In complete analogy to the ground state treatment, a scaled second-order perturbation correction to configuration interaction with singles (CIS(D)) wave functions developed some years ago by Head-Gordon et al. [Chem. Phys. Lett. 219, 21 (1994)] is computed on the basis of density functional data and added to the TD(A)-DFTGGA excitation energy. The method is implemented by applying the resolution of the identity approximation and the efficiency of the code is discussed. Extensive tests for a wide variety of molecules and excited states (of singlet, triplet, and doublet multiplicities) including electronic spectra are presented. In general, rather accurate excitation energies (deviations from reference data typically <0.2 eV) are obtained that are mostly better than those from standard functionals. Still, systematic errors are obtained for Rydberg (too low on average by about 0.3 eV) and charge-transfer transitions but due to the relatively large ax parameter (0.53), B2PLYP outperforms most other functionals in this respect. Compared to conventional HF-based CIS(D), the method is more robust in electronically complex situations due to the implicit account of static correlation effects by the GGA parts. The (D) correction often works in the right direction and compensates for the overestimation of the transition energy at the TD level due to the elevated fraction of HF exchange in the hybrid GGA part. Finally, the limitations of the method are discussed for challenging systems such as transition metal complexes, cyanine dyes, and multireference cases.     

Benchmarking the performance of time-dependent density functional methods

The performance of 24 density functionals, including 14 meta-generalized gradient approximation (mGGA) functionals, is assessed for the calculation of vertical excitation energies against an experimental benchmark set comprising 14 small- to medium-sized compounds with 101 total excited states. The experimental benchmark set consists of singlet, triplet, valence, and Rydberg excited states. The global-hybrid (GH) version of the Perdew-Burke-Ernzerhoff GGA density functional (PBE0) is found to offer the best overall performance with a mean absolute error (MAE) of 0.28 eV. The GH-mGGA Minnesota 2006 density functional with 54% Hartree-Fock exchange (M06-2X) gives a lower MAE of 0.26 eV, but this functional encounters some convergence problems in the ground state. The local density approximation functional consisting of the Slater exchange and Volk-Wilk-Nusair correlation functional (SVWN) outperformed all non-GH GGAs tested. The best pure density functional performance is obtained with the local version of the Minnesota 2006 mGGA density functional (M06-L) with an MAE of 0.41 eV.     

Density functional LCAO calculations for solids: Comparison among Hartree–Fock,DFT local density approximation,and DFT generalized gradient approximation structural properties

In this article, the results of a recently implemented DFT a posteriori and Kohn-Sham (KS ) linear combination of atomic orbital computational scheme for solids are presented. The equilibrium lattice parameters, bulk moduli, and lattice energies are calculated for eight crystallized systems. Local density approximation (LDA ) and generalized gradient approximation (GCA ) functionals and potentials are used. The maps of the Hartree-Fock (HF ) and Ks electronic densities and band structures are depicted. The KS results confirm the trend of the a posteriori scheme. Very good agreement between calculated and experimental lattice energies has been found for GGA potentials. © 1995 John Wiley & Sons, Inc.     

Assessment of time-dependent density functional schemes for computing the oscillator strengths of benzene, phenol, aniline, and fluorobenzene

In present study the relevance of using the time-dependent density functional theory (DFT) within the adiabatic approximation for computing oscillator strengths (f) is assessed using different LDA, GGA, and hybrid exchange-correlation (XC) functionals. In particular, we focus on the lowest-energy valence excitations, dominating the UV/visible absorption spectra and originating from benzenelike HOMO(pi)-->LUMO(pi(*)) transitions, of several aromatic molecules: benzene, phenol, aniline, and fluorobenzene. The TDDFT values are compared to both experimental results obtained from gas phase measurements and to results determined using several ab initio schemes: random phase approximation (RPA), configuration interaction single (CIS), and a series of linear response coupled-cluster calculations, CCS, CC2, and CCSD. In particular, the effect of the amount of Hartree-Fock (HF) exchange in the functional is highlighted, whereas a basis set investigation demonstrates the need of including diffuse functions. So, the hybrid XC functionals--and particularly BHandHLYP--provide f values in good agreement with the highly correlated CCSD scheme while these can be strongly underestimated using pure DFT functionals. These results also display systematic behaviors: (i) larger f and squares of the transition dipole moments (mid R:mumid R:(2)) are associated with larger excitation energies (DeltaE); (ii) these relationships present generally a linear character with R>0.9 in least-squares fit procedures; (iii) larger amounts of HF exchange in the XC functional lead to larger f, R:mumid R:(2), as well as DeltaE values; (iv) these increases in f, mid R:mumid R:(2), and DeltaE are related to increased HOMO-LUMO character; and (v) these relationships are, however, not universal since the linear regression parameters (the slopes and the intercepts at the origin) depend on the system under investigation as well as on the nature of the excited state.     

Small clusters of aluminum and tin: highly correlated calculations and validation of density functional procedures

We present results of molecular electronic structure treatments of multireference configuration interaction (MRCI) type for clusters Al(n) and Sn(n) in the range up to n = 4, and of coupled cluster singles and doubles with perturbative triples corrections (CCSD(T)) type in the range up to n = 10. Basis sets of quadruple zeta size are employed, computed energy differences, such as cohesive energies, E(coh), or dissociation energies for the removal of a single atom, D(e), differ from the complete basis set limit by only a few 0.01 eV. MRCI and CCSD(T) results are then compared to those obtained from density functional theory (DFT) treatments, which show that all computational procedures agree with the general features of D(e) and E(coh). The best agreement of DFT with CCSD(T) is found for the meta-GGA (generalized gradient approximation) TPSS (Tao, Perdew, Staroverov, Scuseria) for which D(e) differs from CCSD(T) by at most 0.15 eV for Al(n) and 0.21 eV for Sn(n). The GGA PBE (Perdew, Burke, Ernzerhof) is slightly poorer with maximum deviations of 0.23 and 0.24 eV, whereas hybrid functionals are not competitive with GGA and meta-GGA functionals. A general conclusion is that errors of D(e) and/or energy differences of isomers computed with DFT procedures may easily reach 0.2 eV and errors for cohesive energies E(coh) 0.1 eV.     

Analytical nuclear excited‐state gradients for the Tamm–Dancoff approximation using uncoupled frozen‐density embedding

We report the derivation and implementation of analytical nuclear gradients for excited states using time‐dependent density functional theory using the Tamm–Dancoff approximation combined with uncoupled frozen‐density embedding using density fitting. Explicit equations are presented and discussed. The implementation is able to treat singlet as well as triplet states and functionals using the local density approximation, the generalized gradient approximation, combinations with Hartree–Fock exchange (hybrids), and range‐separated functionals such as CAM‐B3LYP. The new method is benchmarked against supermolecule calculations in two case studies: The solvatochromic shift of the (vertical) fluorescence energy of 4‐aminophthalimide on solvation, and the first local excitation of the benzonitrile dimer. Whereas for the 4‐aminophthalimide–water complex deviations of about 0.2 eV are obtained to supermolecular calculations, for the benzonitrile dimer the maximum error for adiabatic excitation energies is below 0.01 eV due to a weak coupling of the subsystems. © 2017 Wiley Periodicals, Inc.     

一些密度泛函方法预测电子亲和势

选取了杂化泛函B3LYP, B3PW91, O3LYP, PBE0, 以及与之相对应的GGA泛函BLYP, BPW91, OLYP和PBE, 还选取了能更好地兼顾强相互作用和弱相互作用的X3LYP泛函和在预测NMR的化学位移有较好表现的OPBE泛函, 以及两种meta-GGA泛函VSXC和TPSS, 共12种泛函, 详细地考察了这些泛函在预测EA方面的准确性.     

Performance of the M11 and M11-L density functionals for calculations of electronic excitation energies by adiabatic time-dependent density functional theory

Adiabatic time-dependent density functional theory is a powerful method for calculating electronic excitation energies of complex systems, but the quality of the results depends on the choice of approximate density functional. In this article we test two promising new density functionals, M11 and M11-L, against databases of 214 diverse electronic excitation energies, and we compare the results to those for 16 other density functionals of various kinds and to time-dependent Hartree-Fock. Charge transfer excitations are well known to be the hardest challenge for TDDFT. M11 is a long-range-corrected hybrid meta-GGA, and it shows better performance for charge transfer excitations than any of the other functionals except M06-HF, which is a specialized functional that does not do well for valence excitations. Several other long-range-corrected hybrid functionals also do well, and we especially recommend M11, ωB97X, and M06-2X for general spectroscopic applications because they do exceptionally well on ground-state properties as well as excitation energies. Local functionals are preferred for many applications to extended systems because of their significant cost advantage for large systems. M11-L is a dual-range local functional and-unlike all previous local functionals-it has good performance for Rydberg states as well as for valence states. Thus it is highly recommended for excitation energy calculations on extended systems.     

Interaction of atomic hydrogen with single-walled carbon nanotubes: a density functional theory study

We have studied the interaction of atomic hydrogen with (5,5) and (10,0) single-walled carbon nanotubes (SWNT) using density functional theory. These calculations use Gaussian orbitals and periodic boundary conditions. We compare results from the local spin density approximation, generalized gradient approximation (GGA), and hybrid density functionals. We have first kept the SWNT geometric structure fixed while a single H atom approaches the tube on top of a carbon atom. In that case, a weakly bound state with binding energies from -0.8 to -0.4 eV was found. Full geometry relaxation leads to a strong SWNT deformation, weakening the nearest C-C bonds and increasing the binding energy by about 1 eV. Full hydrogen coverage of the (5,5) SWNT converts this metallic nanotube into an insulator with a band gap of 3.4 eV for the GGA functional and 4.8 eV for the hybrid functional. Hybrid functionals perform similar to pure density functional theory functionals for the calculation of binding energies while band gaps critically depend on the functional choice.     

Performance of TDDFT Vertical Excitation Energies of Core-Substituted Naphthalene Diimides

We have evaluated the performance of various density functionals, covering generalized gradient approximation (GGA), global hybrid (GH) and range-separated hybrid (RSH), using time dependent density functional theory (TDDFT) for computing vertical excitation energies against experimental absorption maximum (λ_max) for a set of 10 different core-substituted naphthalene diimides (cNDI) recorded in dichloromethane. The computed excitation in case of GH PBE0 is most accurate while the trend is most systematic with RSH LCY-BLYP compared to λ_max. We highlight the importance of including solvent effects for optimal agreement with the λ_max. Increasing the basis set size from TZ2P to QZ4P has a negligible influence on the computed excitation energies. Notably, RSH CAMY-B3LYP gave the least error for charge-transfer excitation. The poorest agreement with λ_max is obtained with semi-local GGA functionals. Use of the optimally-tuned RSH LCY-BLYP* is not recommended because of the high computational cost and marginal improvement in results.     

Prescription for the design and selection of density functional approximations: more constraint satisfaction with fewer fits

We present the case for the nonempirical construction of density functional approximations for the exchange-correlation energy by the traditional method of "constraint satisfaction" without fitting to data sets, and present evidence that this approach has been successful on the first three rungs of "Jacob's ladder" of density functional approximations [local spin-density approximation (LSD), generalized gradient approximation (GGA), and meta-GGA]. We expect that this approach will also prove successful on the fourth and fifth rungs (hyper-GGA or hybrid and generalized random-phase approximation). In particular, we argue for the theoretical and practical importance of recovering the correct uniform density limit, which many semiempirical functionals fail to do. Among the beyond-LSD functionals now available to users, we recommend the nonempirical Perdew-Burke-Ernzerhof (PBE) GGA and the nonempirical Tao-Perdew-Staroverov-Scuseria (TPSS) meta-GGA, and their one-parameter hybrids with exact exchange. TPSS improvement over PBE is dramatic for atomization energies of molecules and surface energies of solids, and small or moderate for other properties. TPSS is now or soon will be available in standard codes such as GAUSSIAN, TURBOMOLE, NWCHEM, ADF, WIEN, VASP, etc. We also discuss old and new ideas to eliminate the self-interaction error that plagues the functionals on the first three rungs of the ladder, bring up other related issues, and close with a list of "do's and don't's" for software developers and users.     

香豆素衍生物的荧光发射能计算及XC泛函的合理选择

采用含时密度泛函理论(TDDFT)与单激发组态相互作用(CIS)处理相结合的计算方案对香豆素系列15种已知荧光化合物的发射能进行了系统考察. 结果表明, 发射能与吸收能一样, 其计算值主要取决于交换-相关(XC)泛函的选择. 只要泛函选用得当, 在使用较小基组的TDDFT/6-31G(d)//CIS/3-21G(d)理论水平上即可使绝大部分化合物的实验发射能在精度达0.16 eV以内得以重现. 与吸收能计算不同的是, 无法选用单一的一种泛函来对全系列化合物的发射能作出满意的理论预测. 激发态无明显电荷转移的、7位上有氨(或胺)基取代或有氮原子相连的化合物, 其适用泛函为不含Hartree-Fock(HF)交换能的纯泛函OLYP和BLYP. 而激发态发生较大程度电荷转移的、3 位上有共轭取代基的衍生物, 其适用泛函则为含20%的HF交换成分的混合泛函B3LYP. 因此, 发射能计算中的XC泛函选择, 应同时考虑取代基团效应以及激发态的电子结构特征. 其中, 发射能计算值受XC泛函中HF交换能比例的影响十分敏感. 文中还对激发能计算中的溶剂效应校正方案和激发态几何优化精度的影响进行了讨论.