Novel iridium complexes as high-efficiency yellow and red phosphorescent light emitters for organic light-emitting diodes

A series of novel biscyclometallated iridium complexes based on spirobifluorene ligands and acetyl acetonate (acac) ancillary ligands have been synthesized and characterized. Their electrochemical properties were investigated by cyclic voltammetry (CV). HOMO, LUMO, and energy band gaps of all the complexes were calculated by the combination of UV-vis absorption spectra and CV results. TGA and DSC results indicated their excellent thermal stability and amorphous structure. All the iridium complexes were fabricated into organic light-emitting devices with the device configuration of ITO/PEDOT:PSS (50 nm)/PVK (50 wt %):PBD (40 wt %):Ir complex (10 wt %) (45 nm)/TPBI (40 nm)/LiF (0.5 nm)/Ca (20 nm)/Ag (150 nm). Yellow to red light emission has been achieved from the iridium complexes guest materials. Complex C1 (yellow light emission) achieved an efficiency of 36.4 cd/A (10.1%) at 198 cd/m² and complex C4 (red light emission) reached external quantum efficiency of 4.6%. The slight decrease of external quantum efficiency at high current density revealed that the triplet-triplet (T₁-T₁) annihilation was effectively suppressed by the new developed complexes.     

Solvent-free mechanochemical chlorination of hydrocarbons with CuCl2

Solvent-free chlorination of biphenyl and naphthalene was performed under mechanochemical stressing by high-energy ball milling (HEM) of a mixture of CuCl₂ (95 wt %) and the hydrocarbon (5 wt %). The reactivity of the selected hydrocarbons towards CuCl₂ during HEM partially correlates with their ionisation potentials (IP): hexadecane (9.91 eV) > biphenyl (8.27 eV) > naphthalene (8.14 eV).     

Self-assembly of linear-shaped bi-dihydrazine derivative through intermolecular quadruple hydrogen bonding

A linear-shaped bi-1,3,4-oxadiazole derivative, oxalyl acid N′,N′-di(4-(2-ethylhexyloxy)benzoyl)-hydrazide (FH-Z8) was designed and synthesized. Quadruple hydrogen bonds between bi-dihydrazide units and π-π interactions cooperatively participated in forming supramolecules in chloroform at higher concentrations of FH-Z8. The association constants (K) in chloroform were 2.2×10³ and 1.8×10³ M⁻¹ based on NH1 and NH2 in FH-Z8, respectively. FH-Z8 could gel dichloroethane efficiently with the critical gelation concentration (CGC) of 0.14 wt %, while spontaneously crystallized from the gel during storage.     

Clay entrapped nickel nanoparticles as efficient and recyclable catalysts for hydrogenation of olefins

Nickel nanoparticles are prepared in the interlamellar spaces of K10-Montmorillonite clay by chemical reduction at moderate temperatures. These clay entrapped nickel nanoparticles are characterized by UV-vis, powder XRD, EDX and HRTEM studies. The resultant ecofriendly supramolecular assembly with nickel content (2.84 wt %) has good catalytic efficiency in hydrogenation of alkenes and alkynes with hydrazine as a reducing agent in ethanol medium. Advantages of the present study include absence of an external hydrogen source, catalyst reusability and a green medium.     

Self-aggregated nanoparticles of cholesterol-modified chitosan conjugate as a novel carrier of epirubicin

Cholesterol-modified chitosan conjugate with succinyl linkages (CHCS) was synthesized and characterized by fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR). The degree of substitution (DS) of cholesterol moiety determined by elemental analysis was 7.3%. The self-aggregation behavior of CHCS was evaluated by the fluorescence probe technique and the critical aggregation concentration (CAC) was 1.16 × 10⁻² mg mL⁻¹ in 0.1 M acetic acid solution. CHCS formed monodisperse self-aggregated nanoparticles with a roughly spherical shape and a mean diameter of 417.2 nm by probe sonication in aqueous media. Epirubicin (EPB), as a model anticancer drug, was physically entrapped inside CHCS self-aggregated nanoparticles by the remote loading method and the characteristics of EPB-loaded CHCS self-aggregated nanoparticles were analyzed using dynamic laser light scattering (DLLS), transmission electron microscopy (TEM) and fluorescence spectroscopy. EPB-loaded CHCS self-aggregated nanoparticles were almost spherical in shape and their size increased from 338.2 to 472.9 nm with the EPB-loading content increasing from 7.97% to 14.0%. The release behavior of EPB from CHCS self-aggregated nanoparticles was studied in vitro by dialysis method. The results showed that EPB release rate decreased with the pH increase of the release media. In phosphate buffered saline (PBS, pH 7.4), the EPB release was very slow and the total release amount was about 24.9% in 48 h.     

Self-assembled hybrid nanofibers confer a magnetorheological supramolecular hydrogel

Most magnetorheological materials, composed of magnetic microparticles in a liquid, require significant amounts of magnetic particles and a large magnetic field to achieve the desired effects. Here, we report on a new type of magnetorheological materials consisting of small amounts of magnetic nanoparticles (0.8 wt %) but exhibiting large rheological change (i.e., a gel-sol transition) upon the application of a small magnetic field. We use self-assembly to create hybrid nanofibers, which consist of supramolecular hydrogelators and magnetic nanoparticles, as the matrices of the hydrogel. Localized in the nanofibers at a distance of 1-2 nm, the magnetic nanoparticles occupy a small volume fraction of the hydrogel, significantly enhancing the magnetic dipole interactions between them, which results in the large magnetoresponse. This strategy generates a hierarchical nanostructure and eliminates several drawbacks of the simple mixture of polymers with nanoparticles, and thus provides a new methodology that uses magnetic force to control the nanostructures and properties of soft materials.     

Synthesis and characterization of novel ion-imprinted polymeric nanoparticles for very fast and highly selective recognition of copper(II) ions

This work reports the preparation of new Cu²⁺ ion-imprinted polymeric nanoparticles using 1-hydroxy-4-(prop-2′-enyloxy)-9,10-anthraquinone (AQ) as a vinylated chelating agent. The Cu²⁺ ion found to form a stable 1:1 complex with AQ in methanol solution. The resulting Cu²⁺-AQ complex was copolymerized with ethyleneglycol dimethacrylate, as a cross-linking monomer, via precipitation polymerization method. The imprint copper ion was removed from the polymeric matrix using a 0.1 mol L⁻¹ HNO₃ solution. The Cu²⁺-imprinted polymeric nanoparticles were characterized by IR spectroscopy, scanning electron microscopy (SEM) and N₂ adsorption-desorption isotherms. The SEM micrographs showed colloidal nanoparticles of 60-100 nm in diameter and slightly irregular in shape. Optimum pH for maximum sorption was 7.0. Sorption and desorption of Cu²⁺ ion on the IIP nanoparticles were quite fast and achieved completely over entire investigated time periods of 2-30 min. Maximum sorbent capacity and enrichment factor of the prepared IIP for Cu²⁺ were 73.8 μmol g⁻¹ and 56.5, respectively. The relative standard deviation and limit of detection (C_LOD = 3S_b/m) of the method were evaluated as 2.6% and 0.1 ng mL⁻¹, using inductively coupled plasma-atomic emission spectrometry, respectively. It was found that the imprinting technology results in increased affinity of the prepared material toward Cu²⁺ ion over other metal ions with the same charge and close ionic radius. The relative standard deviations for six and twenty replicates with the same nanoparticles were found to be 1.7% and 2.1%, respectively.     

Heterogeneous bimetallic Pt-Sn/γ-Al2O3 catalyzed direct synthesis of diamines from N-alkylation of amines with diols through a borrowing hydrogen strategy

Direct synthesis of diamines has been efficiently realized from the N-alkylation of amines with diols by means of heterogeneous bimetallic Pt-Sn/γ-Al₂O₃ catalyst (0.5 wt % Pt, molar ratio Pt:Sn = 1:3) through a ‘Borrowing Hydrogen’ strategy under ligand-free conditions. The present methodology provides an environmentally benign route to diamines.     

Development of functionalized terbium fluorescent nanoparticles for antibody labeling and time-resolved fluoroimmunoassay application

Silica-based functionalized terbium fluorescent nanoparticles were prepared, characterized and developed as a fluorescence probe for antibody labeling and time-resolved fluoroimmunoassay. The nanoparticles were prepared in a water-in-oil (W/O) microemulsion containing a strongly fluorescent Tb³⁺ chelate, N,N,N¹,N¹-[2,6-bis(3′-aminomethyl-1′-pyrazolyl)phenylpyridine] tetrakis(acetate)-Tb³⁺ (BPTA-Tb³⁺), Triton X-100, octanol, and cyclohexane by controlling copolymerization of tetraethyl orthosilicate (TEOS) and 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane (AEPS) with ammonia water. The characterizations by transmission electron microscopy and fluorometric methods show that the nanoparticles are spherical and uniform in size, 45 ± 3 nm in diameter, strongly fluorescent with fluorescence quantum yield of 10% and a long fluorescence lifetime of 2.0 ms. The amino groups directly introduced to the nanoparticle’s surface by using AEPS in the preparation made the surface modification and bioconjugation of the nanoparticles easier. The nanoparticle-labeled anti-human α-fetoprotein antibody was prepared and used for time-resolved fluoroimmunoassay of α-fetoprotein (AFP) in human serum samples. The assay response is linear from 0.10 ng ml⁻¹ to about 100 ng ml⁻¹ with the detection limit of 0.10 ng ml⁻¹. The coefficient variations (CVs) of the method are less than 9.0%, and the recoveries are in the range of 84-98% for human serum sample measurements.     

An electrochemical sensor prepared by sonochemical one-pot synthesis of multi-walled carbon nanotube-supported cobalt nanoparticles for the simultaneous determination of paracetamol and dopamine

Multi-walled carbon nanotubes (MWCNTs) functionalized by cobalt nanoparticles were obtained using a single step chemical deposition method in an ultrasonic bath. The composite material was characterized using scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). The electroactivity of the cobalt-functionalized MWCNTs was assessed in respect to the electrooxidation of paracetamol (PAR) and dopamine (DA). It was found that the carbon nanotube supported cobalt nanoparticles have significantly higher catalytic properties. The proposed electrode has been applied for the simultaneous determination of PAR and DA. The modified electrode could resolve the overlapped voltammetric waves of PAR and DA into two well-defined voltammetric peaks with peak to peak separation of about 203 mV. On the other hand, the presence of potential drug interfering compounds AA and UA did not affect the voltammetric responses of PAR and DA. The current of oxidation peaks showed a linear dependent on the concentrations of PAR and DA in the range of 5.2 × 10⁻⁹–4.5 × 10⁻⁷ M (R² = 0.9987) and 5.0 × 10⁻⁸–3.0 × 10⁻⁶ M (R² = 0.9999), respectively. The detection limits of 1.0 × 10⁻⁹ M and 1.5 × 10⁻⁸ M were obtained for PAR and DA, respectively. The proposed electrode showed good stability (peak current change: 4.9% with and RSD of 2.6% for PAR; 5.5% with and RSD of 3.0% for DA over 3 weeks), reproducibility (RSD 2.3% for PAR and RSD 1.5% for DA), repeatability (RSD 2.25% for PAR and RSD 2.50% for DA) and high recovery (99.7% with an RSD of 1.3% for PAR; 100.8% with an RSD of 1.8% for DA). The proposed method was successfully applied to the determination of PAR and DA in pharmaceuticals.     

Preparation and application of sol–gel acrylate and methacrylate solid-phase microextraction fibres for gas chromatographic analysis of organoarsenic compounds

Novel solid-phase microextraction (SPME) fibres containing methyl, ethyl, butyl acrylate and methacrylate were first prepared by a sol–gel technique and investigated for determination of selected organoarsenic compounds (lewisite, methyldichloroarsine, phenyldichloroarsine, diphenylchloroarsine and triphenylarsine) from water samples. The influence of sorption and desorption temperature and time for extraction efficiency were examined. The best new fibre coatings (methyl acrylate (MA), methyl methacrylate (MMA) and combination of methyl acrylate and methacrylate (MA/MMA)) for analysis of organoarsenic compounds were selected and compared with commercial fibres. The distribution coefficients K_fs were determined for the best novel fibres and for absorption commercial fibres. The highest K_fs value were obtained for MA/MMA and MMA fibres and were respectively 9458 and 6561 for lewisite and 6458 and 5884 for triphenylarsine. The limit of detection and quantification were determined for the three laboratory obtained fibres (MA, MMA and MA/MMA). LODs for tested fibres, at a signal-to-noise of 3, were 0.03–0.3 ng mL⁻¹. LOQs for selected coatings, at signal-to-noise of 10, were 0.1–0.8 ng mL⁻¹. The relative standard deviations (RSD) for all measurements were 4.3–6.5% (n = 9) and relative errors were 2.5–5%. The laboratory obtained fibres were used for environmental analysis of pore water samples from the Baltic Sea.     

Synthesis of hexadecylamine capped nanoparticles using group 12 complexes of N-alkyl-N-phenyl dithiocarbamate as single-source precursors

Metal complexes of the type ML¹L² [M = Zn, Cd, Hg; L¹ = N-methyl-N-phenyldithiocarbamato and L² = N-ethyl-N-phenyldithiocarbamato] have been synthesized and characterized by elemental analyses, FT-IR and NMR spectroscopy. The complexes are formulated as four coordinate species with the dithiocarbamates acting as bidentate chelating ligands. The complexes were thermolysed and used as single-source precursors for the synthesis of HDA-capped MS (M = Zn, Cd, Hg) nanoparticles. The HgS nanoparticles show a narrow size distribution from their TEM images, while the CdS nanoparticles gave crystalline particles with a sharp band absorption edge and a narrow PL band. The ZnS nanoparticles gave crystalline particles with a stacking arrangement.     

Development of a gold nanoparticles based chemiluminescence imaging assay and its application

In this paper, a novel gold nanoparticles based protein immobilization method was designed. Biocomposites of gold nanoparticles and proteins were successfully coated on poly(methyl methacrylate) (PMMA) plates and polystyrene microtiter plates. The proteins could be immobilized on solid materials with high density and better bioactivity. Based on above design, chemiluminescence (CL) imaging assay for determination of H₂O₂ and recombinant human interleukin-6 (rHu IL-6) was developed. The linear range and the loading capability were greatly improved when compared with imaging assay performed with direct proteins immobilization. Under the selected experimental conditions, a linear relationship was obtained between the CL intensity and the concentration of H₂O₂ in the range of 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹, and rHu IL-6 in the range of 2.0-312.0 pg mL⁻¹. The detection limits were 2 × 10⁻⁷ mol L⁻¹ (3σ) for H₂O₂ and 0.5 pg mL⁻¹ for rHu IL-6 with relative standard deviation of 3.8% for 3.0 × 10⁻⁵ mol L⁻¹ H₂O₂, and 4.4% for 39.0 pg mL⁻¹ rHu IL-6. This method has been applied to the determination of rHu IL-6 in human serum with satisfactory results.     

Photoinduced interactions between colloidal TiO2 nanoparticles and calf thymus-DNA

The interaction of colloidal TiO₂ nanoparticles with calf thymus-DNA was studied by using absorption, FT-IR, steady state and time resolved fluorescence spectroscopic techniques. The apparent association constant has been deduced (K_app = 2.85 × 10³ M⁻¹) from the absorption spectral changes of the DNA-colloidal TiO₂ nanoparticles using the Benesi–Hildebrand equation. Addition of colloidal TiO₂ nanoparticles quenched the fluorescence of EtBr–DNA. The number of binding sites (n = 0.97) and the apparent binding constant (K = 6.68 × 10³ M⁻¹) were calculated from relevant fluorescence quenching data. The quenching, through a static mechanism, was confirmed by time resolved fluorescence spectroscopy.     

Using gold nanoparticles to improve the recovery and the limits of detection for the analysis of monohydroxy-polycyclic aromatic hydrocarbons in urine samples

We present a novel approach to improve the analytical figures of merit of solid-phase extraction high-performance liquid chromatography (SPE-HPLC) for the analysis of monohydroxy-polycyclic aromatic hydrocarbons in urine samples. The novel alternative substitutes the evaporation step that is currently used in SPE-HPLC methodology with a pre-concentration procedure that extracts metabolites with gold nanoparticles. The analytical potential of the new approach is evaluated with the following six metabolites: 9-hydroxyphenanthrene, 2-hydroxyfluorene, 1-hydroxypyrene, 6-hydroxychrysene, 3-hydroxybenzo[a]pyrene and 4-hydroxybenzo[a]pyrene. We demonstrate that the substitution of the evaporation step with the gold nanoparticles procedure improves the overall recoveries, the relative standard deviations of the average recoveries and the limits of detection of SPE-HPLC analysis. The overall recoveries of the studied metabolites varied from 59.7 ± 3.6% (2-hydroxyfluorene) to 92.3 ± 2.5% (6-hydroxychrysene). The relative standard deviations of the average recoveries were lower than 6%. The limits of detection were at the parts-per-trillion levels and varied from ∼2 pg mL⁻¹ (6-hydroxychrysene) to ∼18 pg mL⁻¹ (2-hydroxyfluorene).     

A sensitive amperometric sensor for hydrazine and hydrogen peroxide based on palladium nanoparticles/onion-like mesoporous carbon vesicle

Onion-like mesoporous carbon vesicle (MCV) with multilayer lamellar structure was synthesized by a simply aqueous emulsion co-assembly approach. Palladium (Pd) nanoparticles were deposited on the MCV matrix (Pd/MCV) by chemical reduction of H₂PdCl₄ with NaBH₄ in aqueous media. Pd(X)/MCV (X wt.% indicates the Pd loading amount) nanocomposites with different Pd loading amount were obtained by adjusting the ratio of precursors. The particular structure of the MCV results in efficient mass transport and the onion-like layers of MCV allows for the obtainment of highly dispersed Pd nanoparticles. The introduction of Pd nanoparticles on the MCV matrix facilitates hydrazine oxidation at more negative potential and delivers higher oxidation current in comparison with MCV. A linear range from 2.0 × 10⁻⁸ to 7.1 × 10⁻⁵ M and a low detection limit of 14.9 nM for hydrazine are obtained at Pd(25)/MCV nanocomposite modified glassy carbon (GC) electrode. A nonenzymatic amperometric sensor for hydrogen peroxide based on the Pd(25)/MCV nanocomposite modified GC electrode is also developed. Compared with MCV modified GC electrode, the Pd(25)/MCV nanocomposite modified GC electrode displays enhanced amperometric responses towards hydrogen peroxide and gives a linear range from 1.0 × 10⁻⁷ to 6.1 × 10⁻³ M. The Pd(25)/MCV nanocomposite modified GC electrode achieves 95% of the steady-current for hydrogen peroxide within 1 s. The combination of the unique properties of Pd nanoparticles and the porous mesostructure of MCV matrix guarantees the improved analytical performance for hydrazine and hydrogen peroxide.     

Preconcentration and spectrophotometric determination of low concentrations of malachite green and leuco-malachite green in water samples by high performance solid phase extraction using maghemite nanoparticles

A novel and sensitive extraction procedure using maghemite nanoparticles (γ-Fe₂O₃) modified with sodium dodecyl sulfate (SDS), as an efficient solid phase, was developed for removal, preconcentration and spectrophotometric determination of trace amounts of malachite green (MG) and leuco-malachite green (LMG). Combination of nanoparticle adsorption and easily magnetic separation was used to extraction and desorption of MG and LMG. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. Maghemite nanoparticles were prepared by co-precipitation method and their surfaces were modified by SDS. The size and properties of the produced maghemite nanoparticles was determined by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and BET analysis. MG and LMG became adsorbed at pH 3.0. LMG was oxidized to MG by adsorption on maghemite nanoparticles. The adsorbed MG was then desorbed and determined spectrophotometrically. The calibration graph was linear in the range 0.50-250.00 ng mL⁻¹ of MG and LMG with a correlation coefficient of 0.9991. The detection limit of the method for determination of MG was 0.28 ng mL⁻¹ and the relative standard deviation (R.S.D.) for 10.00 and 50.00 ng mL⁻¹ of malachite green was 1.60% (n = 3) and 0.86% (n = 5), respectively. A preconcentration factor of 50 was achieved in this method. The Langmuir adsorption capacity (q_max) was found to be 227.3 mg g⁻¹ of the adsorbent. The method was applied to the determination of MG in fish farming water samples.     

Y2O3:Eu (5 mol%) with Ag nanoparticles prepared by citrate precursor

Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) and Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) containing 1 mol% of Ag nanoparticles were prepared by heat treatment of a viscous resin obtained via citrate precursor. TEM and EDS analyses showed that Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) is formed by nanoparticles with an average size of 12 nm, which increases to 30 nm when Ag is present because the effect of metal induced crystallization occurs. Ag nanoparticles with a size of 9 nm dispersed in Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) were obtained and the surface plasmon effect on Ag nanoparticles was observed. The emission around 612 nm assigned to the Eu³⁺ (⁵D₀→⁷F₂) transition enhanced when the Ag nanoparticles were present in the Y₂O₃:Eu³⁺ luminescent material.     

Preparation of poly(vinylpyrrolidone)-protected Prussian blue nanoparticles-modified electrode and its electrocatalytic reduction for hemoglobin

In this paper, a novel modified electrode was developed by using highly dispersed Prussian blue (PB) nanoparticles protected by poly(vinylpyrrolidone) (PVP). The size of the nanoparticles was controlled through adjusting the feed ratio of PVP/Fe²⁺. Physical characteristics of the nanocomposite were studied by transmission electron microscopy (TEM), UV-vis, IR spectroscopy, and X-ray powder diffraction (XRPD) analysis. The electrocatalytic reduction of hemoglobin (Hb) at PVP-protected PB nanoparticles (PVP/PB NPs)-modified electrode had been investigated. In addition, the size effects and biocompatibility of PVP/PB NPs for the electrochemistry of Hb were also observed. Experimental results indicated that the reduction peak currents of Hb were linear with its concentrations over the range from 1.0 × 10⁻⁷ to 1.2 × 10⁻⁵ mol/L and the calculated detection limit (S/N = 3) was 4.0 × 10⁻⁸ mol/L.     

Determination of benorilate in pharmaceutical formulations and its metabolite in urine at carbon paste electrode modified by silver nanoparticles

Benorilate was determined by the differential pulse voltammetry (DPV) using a carbon paste electrode modified by silver nanoparticles in 1.25 × 10⁻³ mol l⁻¹ KH₂PO₄ and Na₂HPO₄ buffer solution (pH = 6.88, 25 °C) .The anodic peak potential was +0.970 V (versus SCE). A good linear relationship was realized between the anodic peak currents and benorilate concentrations in the range of 1.0 × 10⁻⁷ to 2.5 × 10⁻⁴ mol l⁻¹ with the detection limit of 1.0 × 10⁻⁸ mol l⁻¹. The recovery was 95.2-103.6% with the relative standard deviation of 3.6% (n = 9). The pharmaceutical preparations, benorilate tablets samples and its metabolite (salicylic acid) in urine were determined with the desirable results.