Synthesis of novel chiral Schiff base and amino alcohol derivatives of calix[4]arene and chiral recognition properties

In the present study, the synthesis and liquid phase extraction properties towards some amino acid methylesters and amino alcohols of Schiff base and amino alcohol substituted calix[4]arene are reported. The Schiff base substituted calix[4]arene 5 has been synthesized via condensation reaction involving 5,17-diformyl-11,23-di-tert-butyl-25,27-di[3-(4-formylphenoxy)propoxy]-26,28 dihydroxycalix[4]arene 4 and (R)-(?)-2-phenylglycine methyl ester in CHCl₃:MeOH. To give the amino alcohol substituted calix[4]arene 6, the synthesized chiral compound 5 was reduced by LiAlH₄. The new chiral Schiff base and amino alcohol derivatives of calix[4]arene have been characterized by a combination of FT-IR, ¹H NMR, ¹³C NMR, FAB-MS and elemental analysis. Also, the extraction behaviors of 5 and 6 towards some selected amino acid methylesters and amino alcohols have been studied by liquid–liquid extraction.     

Inherently chiral biscalixarene cone–cone conformers consisting of calix[4]arene and calix[5]arene subunits

Inherently chiral biscalixarenes with hetero-cavities were synthesized by a covalent assembly of p-tert-butylcalix[5]arene with a 1,3-substituted calix[4]arene via 1,3-alkylation reaction and subsequent desymmetrization. The racemates were resolved by chiral HPLC method. ¹H NMR spectra, VT-NMR spectra, and theoretical calculations support that the calix[5]arene subunit of the inherently chiral calix[4][5]arene ester adopts a cone-in conformation, with the aromatic ring bearing the CH₂CO₂Et group tilting inward the calix[5]arene cavity. By contrast, such a cone-in structural feature of the calix[5]arene subunit disappears for the corresponding inherently chiral calix[4][5]arene carboxylic acid, due to the intramolecular hydrogen bonding between the carboxyl group and an ethereal oxygen of the glycolic chain.     

Preparation of calix[4]arene-based sporopollenin and examination of its dichromate sorption ability

The present study describes the preparation of a new calix[4]arene-based sporopollenin material and its application for the removal of Na₂Cr₂O₇ from aqueous solution. The novel calix[4]arene-based sporopollenin material was prepared via the immobilization of dihydrazine amide derivative of p-tert-butylcalix[4]arene (3) onto the modified sporopollenin. The newly prepared calix[4]arene-based sporopollenin is characterized by using different analytical techniques such as FT-IR spectroscopy, scanning electron microscope and Elemental analysis. The batch wise sorption study was carried out to optimize various experimental parameters such as the effect of sorbent dosage, pH, temperature and Cr(VI) anion concentration. It has been found that the sorption of Cr(VI) anion on calix[4]arene-based sporopollenin was highly pH dependent and maximum sorption was achieved at pH 1.5. The sorption behavior was also evaluated by Langmuir, Freundlich and Dubinin Radushkevich isotherms. The value of correlation coefficient (R ²) showed a good agreement with Freundlich isotherm model. Result of study demonstrated that calix[4]arene-based sporopollenin proved to be highly effective for the removal of Cr(VI).     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

Synthesis and electrochemical properties of calix[4]arene derivatives containing ferrocene units in the cone and 1,3-alternate conformation

Two novel calix[4]arene receptors containing ferrocene units in cone (L₁) and 1,3-alternate (L₂) conformations have been synthesized from 25,27-dihydroxy-26,28-bis[(3-aminopropyl)oxy]calix[4]arene 4 or 25,26,27,28-tetra[(3-aminopropyl)oxy]calix[4]arene 6 and ferrocenecarboxaldehyde via condensation, respectively. Their structures have been characterized by ¹H, ¹³C, APT, COSY NMR, FTIR, HSMR, and UV–vis spectral data. The electrochemical behavior of L₁ and L₂ has been investigated in the presence of F^?, Cl^?, Br^?, H₂PO₄^?, CH₃COO^? anions. Electrochemical studies show that these receptors electrochemically recognize CH₃COO^?, H₂PO₄^?, and Cl^?, anions. Using an UV–vis study, the selectivity to these anions in DMSO solution was confirmed.     

Formation of pseudo[3]rotaxanes containing calix-bis-crowns and secondary ammonium ions and their thermodynamic stabilities in a solution: preorganization by second macrocycle and nonallosteric behavior exhibited by large crown cavities

This Letter describes the formation of pseudo[3]rotaxanes containing calix[4]-bis-crowns, exhibiting a 1,3-alternate conformation and large crown cavities, and secondary ammonium ions. The first and second association constants of pseudo[3]rotaxane formation are moderate (K₁ = 175, K₂ = 100 M⁻¹) and are higher than that of the corresponding pseudo[2]rotaxane (K = 24 M⁻¹), consisting of a calix[4]-mono-crown and the same secondary ammonium ion.     

An efficient route to disymmetrically substituted calix[6]arenes. Synthesis of novel ligands presenting a N2S or N3CO2 binding core

The C_3v tris-methoxy calix[6]arene was selectively mono-alkylated by dibromoethane yielding a key intermediate for the design of disymmetrically O-substituted calix[6]arenes. Indeed, subsequent reactions with various functional groups afforded novel calix[6]arene-based biomimetic ligands that present a mixed donor N₂S or N₃CO₂⁻ environment in an efficient way.     

Synthesis of chiral calix[4]arenes bearing tartaric ester moieties

The synthesis of chiral calix[4]arenes with tartaric acid ester moieties has been achieved by the reactions of tartaric ester chloroacetates with calix[4]arenes in moderate yields. All the chiral calix[4]arene derivatives are in a cone conformation according to the ¹H NMR doublet–doublet pattern of the protons of the methylene groups between the phenol rings. The results of NMR and specific rotations indicate that the molecules have C₂ symmetry with asymmetric features.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Chiral calix[4]azacrowns for enantiomeric recognition of amino acid derivatives

In this study the synthesis of novel chiral calix[4]azacrown derivatives has been reported. The enantioselectivity of chiral receptors was investigated by using UV-vis spectroscopy. All the chiral calix[4]arene derivatives exhibited certain chiral recognition toward the enantiomers of phenylalanine (Phe-OMe·HCl) and alanine methyl ester hydrochlorides (Ala-OMe·HCl). As a chiral receptor, the furfuryl-armed calix[4]azacrown ether 7 has the best enantiomeric discriminating ability for α-amino acid ester hydrochlorides (up to K_L/K_D=2.08, ΔΔG₀=−1.82 kJ mol⁻¹) in CHCl₃. The enantiomeric recognition abilities for guests are also discussed from a thermodynamic point of view.     

Complexation and extraction of non-ferrous metals by calix[n]arene phosphine oxides

The extraction of non-ferrous metal (M²⁺) nitrates by the calix[4,6]arenes (L), bearing four or six phosphine oxide donor groups at the upper or at the lower rim, was quantitatively described in the form of [M_n(NO₃)_2nL] (n = 1, 2) complexes. The extraction constants (Zn²⁺ > Cu²⁺ > Co²⁺ > Ni²⁺) for the both types of L coincide with Irving-Williams sequence. Calix[4]arenes, phosphorylated at the lower (narrow) rim, provide better stability of ML complexes because of the best spatial fitting of M²⁺ by the donor groups. For the upper (wide) rim phosphorylated calix[4]arenes M₂L and ML₂ complexes are more stable. Unusual zwitterionic [Co₂(NO₃)₄L] complex of the lower rim tetraphosphorylated calix[4]arene 1 was determined by X-ray structural analysis.     

Effect of p-tert-butylcalix[4]arene fitted with phosphinoyl pendant arms as synergistic agent in the solvent extraction of trivalent lanthanoids with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione and structural study of solid complexes by IR,NMR and X-ray

The synergistic solvent extraction of five selected lanthanoid ions (La³⁺, Nd³⁺, Eu³⁺, Ho³⁺ and Lu³⁺) with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (HL) and 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis-(dimethylphosphinoylmethoxy)calix[4]arene, (S) in CHCl₃ has been studied. It was found that in presence of this phosphorus-containing calix[4]arene the lanthanoid ions have been extracted as [LnL₃S₂]. The values of the equilibrium constants and the separation factor have been calculated. The influence of the synergistic agent on the extraction process has been discussed.     

Calixarenes. 5. Dynamic NMR characteristics of p-tert-butylcalix[4]-arene and p-tert-butylcalix[8]arene

The near identity of the temperature dependent ¹H-NMR spectra of p-tert-butylcalix-[4]- and calix[8]arene in CDCl₃ and bromobenzene-d₅ is shown to be drastically altered in pyridine-d₅, attributable to disruption of intramolecular hydrogen bonding.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

ABSORPTIVE IONOPHORES FOR Fe3+ CATION BY PARENT CALIX[n]ARENES

The absorption of Fe³⁺ ion from the aqueous phase to the solid phase was carried out by using p-tert-butyl calix[6]arene (L₁), calix[6]arene (L₂), p-tert-butyl calix[8]arene (L₃), and calix[8]arene (L₄). The effect of varying pH upon the absorption capability of parent calixarenes was examined. It was found that the compounds (L₁, L₂, L₃, and L₄) showed the highest extractability toward Fe³⁺ ion at 4.5–5.4. The calixarene L₂ shows a strong binding ability to Fe³⁺ ion. Based on the continuous variation method, calixarene L₂ formed 1:1 complex with Fe³⁺ ion.     

Synthesis and application of an efficient calix[4]arene-based anion receptor bearing imidazole groups for Cr(VI) anionic species

We synthesized the new calix[4]arene amines bearing two and four imidazole or tert-butylamine moieties (9a,b/10a,b) by the reaction of di- or tetra-tosylated calix[4]arene derivatives (7 and 8, respectively) with 1-(3-aminopropyl)imidazole and/or tert-butylamine, respectively. After the characterization of 9a,b/10a,b their extraction abilities toward Cr(VI) anionic species (CAS) was evaluated and compared by the liquid–liquid extraction method. The extraction results revealed that calix[4]arene amine having four imidazole groups (10a) was an efficient anion receptor for CAS. Moreover, the extraction of CAS by 10a in the presence of other anions such as Cl^?, NO₃^?, and PO₄^3? showed that 10a could be a selective anion receptor for CAS in the presence of those anions.     

Mono Halogen Substituted Calix[4]pyrroles: Fine-tuning the Anion Binding Properties of Calix[4]pyrrole

Abstract

Single halogen atom (i. e. I, Br, Cl and F) substituted calix[4]pyrroles, compounds 2, 3, 4 and 5, were synthesized. Studies of these systems reveal that replacement of a single β-pyrrolic hydrogen atom can increase the anion binding ability of calix[4]pyrroles for a variety of anions (e. g. Cl^?, Br^?, H₂PO₄ ^? and HSO^? ₄) relative to normal non-halogen substituted calix[4]pyrrole 1. In the case of chloride anion, the expected relative affinity sequence of 5 > 4 > 3 > 2 was observed. This was not found to be true for Br^?, H²PO^? ₄, and HSO^? ₄. Here, the chlorine substituted calix[4]pyrrole 4 was found to display a slightly higher affinity in the case of each anion than the fluorine-bearing derivative 5. This was rationalized in terms of intermolecular NH … F hydrogen bonding interactions being present in CD₂Cl₂ solutions of 5. Support for this latter conclusion came from concentration and temperature-dependent NMR spectroscopic studies.

A matched set of mono halogen substituted calix[4]pyrroles was used to study in detail, the extent to which halogen substituents may be used to fine-tune the anion binding properties of calix[4]pyrroles.     

Novel redox receptors for ion-pair and α-amino acid: synthesis and complexation properties of calix[4]arene derivatives bearing large conjugated ferrocene groups

By reacting calix[4]arene 1,3-bi-hydrazide derivative (2) with formacylferrocene in “1?+?2” condensation mode, novel calix[4]arene derivative bearing two conjugated ferrocene groups (3) was obtained in yield of 88%. By reacting 1,3-bi-substituted [2-(p-formylphenyloxy)ethyloxy]-p-tert-butylcalix[4]arene (5) with 1,1′-diacetylferrocene hydrazone (4) in “1?+?1” condensation mode, novel calix[4]arene derivative with 1,3-substituted large conjugated ferrocene bridge (6) was synthesized in yield of 83%. The structures and conformations of new compounds were confirmed by elemental analyses, IR spectra, ESI-MS, ¹H NMR, etc. The electrochemical cyclic voltammetry experiments revealed that compounds 3 and 6 possessed excellent reversible electrochemical properties. The ¹H NMR titration study showed that compound 6 possessed excellent complexation abilities for NaH₂PO₄ and glycine in 1:1 host–guest complex with the association constants of 3,850 and 2,460?M^?1, respectively.