In situ adsorption studies of a 14-amino acid leucine-lysine peptide onto hydrophobic polystyrene and hydrophilic silica surfaces using quartz crystal microbalance, atomic force microscopy, and sum frequency generation vibrational spectroscopy

The adsorption of a 14-amino acid amphiphilic peptide, LK14, which is composed of leucine (L, nonpolar) and lysine (K, charged), on hydrophobic polystyrene (PS) and hydrophilic silica (SiO2) was investigated in situ by quartz crystal microbalance (QCM), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. The LK14 peptide, adsorbed from a pH 7.4 phosphate-buffered saline (PBS) solution, displayed very different coverage, surface roughness and friction, topography, and surface-induced orientation when adsorbed onto PS versus SiO2 surfaces. Real-time QCM adsorption data revealed that the peptide adsorbed onto hydrophobic PS through a fast (t < 2 min) process, while a much slower (t > 30 min) multistep adsorption and rearrangement occurred on the hydrophilic SiO2. AFM measurements showed different surface morphologies and friction coefficients for LK14 adsorbed on the two surfaces. Surface-specific SFG spectra indicate very different ordering of the adsorbed peptide on hydrophobic PS as compared to hydrophilic SiO2. At the LK14 solution/PS interface, CH resonances corresponding to the hydrophobic leucine side chains are evident. Conversely, only NH modes are observed at the peptide solution/SiO2 interface, indicating a different average molecular orientation on this hydrophilic surface. The surface-dependent difference in the molecular-scale peptide interaction at the solution/hydrophobic solid versus solution/hydrophilic solid interfaces (measured by SFG) is manifested as significantly different macromolecular-level adsorption properties on the two surfaces (determined via AFM and QCM experiments).     

Adsorption of 1- and 2-butylimidazoles at the copper/air and steel/air interfaces studied by sum frequency generation vibrational spectroscopy

The structure of thin films of 1- and 2-butylimidazoles adsorbed on copper and steel surfaces under air was examined using sum frequency generation (SFG) vibrational spectroscopy in the ppp and ssp polarizations. Additionally, the SFG spectra of both isomers were recorded at 55 °C at the liquid imidazole/air interface for reference. Complementary bulk infrared, reflection-absorption infrared spectroscopy (RAIRS), and Raman spectra of both imidazoles were recorded for assignment purposes. The SFG spectra in the C-H stretching region at the liquid/air interface are dominated by resonances from the methyl end group of the butyl side chain of the imidazoles, indicating that they are aligned parallel or closely parallel to the surface normal. These are also the most prominent features in the SFG spectra on copper and steel. In addition, both the ppp and ssp spectra on copper show resonances from the C-H stretching modes of the imidazole ring for both isomers. The ring C-H resonances are completely absent from the spectra on steel and at the liquid/air interface. The relative intensities of the SFG spectra can be interpreted as showing that, on copper, under air, both butylimidazoles are adsorbed with their butyl side chains perpendicular to the interface and with the ring significantly inclined away from the surface plane and toward the surface normal. The SFG spectra of both imidazoles on steel indicate an orientation where the imidazole rings are parallel or nearly parallel to the surface. The weak C-H resonances from the ring at the liquid/air interface suggest that the tilt angle of the ring from the surface normal at this interface is significantly greater than it is on copper.     

Molecular packing of lysozyme,fibrinogen, and bovine serum albumin on hydrophilic and hydrophobic surfaces studied by infrared-visible sum frequency generation and fluorescence microscopy

Infrared-visible sum frequency generation (SFG) vibrational spectroscopy, in combination with fluorescence microscopy, was employed to investigate the surface structure of lysozyme, fibrinogen, and bovine serum albumin (BSA) adsorbed on hydrophilic silica and hydrophobic polystyrene as a function of protein concentration. Fluorescence microscopy shows that the relative amounts of protein adsorbed on hydrophilic and hydrophobic surfaces increase in proportion with the concentration of protein solutions. For a given bulk protein concentration, a larger amount of protein is adsorbed on hydrophobic polystyrene surfaces compared to hydrophilic silica surfaces. While lysozyme molecules adsorbed on silica surfaces yield relatively similar SFG spectra, regardless of the surface concentration, SFG spectra of fibrinogen and BSA adsorbed on silica surfaces exhibit concentration-dependent signal intensities and peak shapes. Quantitative SFG data analysis reveals that methyl groups in lysozyme adsorbed on hydrophilic surfaces show a concentration-independent orientation. However, methyl groups in BSA and fibrinogen become less tilted with respect to the surface normal with increasing protein concentration at the surface. On hydrophobic polystyrene surfaces, all proteins yield similar SFG spectra, which are different from those on hydrophilic surfaces. Although more protein molecules are present on hydrophobic surfaces, lower SFG signal intensity is observed, indicating that methyl groups in adsorbed proteins are more randomly oriented as compared to those on hydrophilic surfaces. SFG data also shows that the orientation and ordering of phenyl rings in the polystyrene surface is affected by protein adsorption, depending on the amount and type of proteins.     

Adsorption of SDS and PEG on calcium fluoride studied by sum frequency generation vibrational spectroscopy

The adsorption of sodium dodecyl sulfate (SDS) from aqueous solution onto a calcium fluoride substrate (CaF(2)), in the presence of polyethylene glycol (PEG) of different molecular weights, has been investigated using the interface specific nonlinear optical technique of sum frequency generation (SFG) vibrational spectroscopy. Spectra of adsorbed SDS (in the C-H stretching region) were recorded at the surface of a CaF(2) prism in contact with SDS solutions at concentrations up to the cmc (8 mM) of the pure surfactant and in contact with binary solutions containing SDS and PEG with molecular weights from 400 to 12 000. In contrast with SFG spectra from the same combinations of surfactant and polymer on a hydrophobic surface, there was no evidence of spectra arising from the actual polymer adsorbed on CaF(2) at any polymer molecular weight either in the absence or presence of surfactant. However, there was indirect evidence for the presence of adsorbed polymer from changes in the SDS SFG spectra in the presence of polymer compared with spectra when the polymer was absent. The SFG spectra of SDS at 0.8 mM were closely similar to each other at all polymer molecular weights and different from the spectra in the absence of the polymer. The spectral differences between the polymer present and polymer absent was much smaller when the solution concentration of surfactant was 8 mM.     

Curing induced structural reorganization and enhanced reactivity of amino-terminated organic thin films on solid substrates: observations of two types of chemically and structurally unique amino groups on the surface

Infrared-visible sum frequency generation vibrational spectroscopy (SFG) was used to characterize the structure of 3-aminopropyltriethoxysilane (APTES) films deposited on solid substrates under controlled experimental conditions for the first time. Our SFG spectra in combination with complementary analytical data showed that APTES films undergo structural changes when cured at an elevated temperature. Before the films are cured, well-ordered hydrophobic ethoxy groups are dominantly present on the surface. A majority of hydrophilic surface amino groups are protonated, and they are either buried or randomly oriented at the interface. After the films are cured, chemically and structurally different neutral amino groups are detected on the surface. Unlike the protonated amino groups, a new class of neutral amino groups is ordered at the interface and shows enhanced reactivity.     

C-H stretching vibrations of methyl, methylene and methine groups at the vapor/alcohol (N = 1-8) interfaces

In IR and Raman spectral studies, the congestion of the vibrational modes in the C-H stretching region between 2800 and 3000 cm(-1) has complicated spectral assignment, conformational analysis, and structural and dynamics studies, even with quite a few of the simplest molecules. To resolve these issues, polarized spectra measurement on a well aligned sample is generally required. Because the liquid interface is generally ordered and molecularly thin, and sum frequency generation vibrational spectroscopy (SFG-VS) is an intrinsically coherent polarization spectroscopy, SFG-VS can be used for discerning details in vibrational spectra of the interfacial molecules. Here we show that, from systematic molecular symmetry and SFG-VS polarization analysis, a set of polarization selection rules could be developed for explicit assignment of the SFG vibrational spectra of the C-H stretching modes. These polarization selection rules helped assignment of the SFG-VS spectra of vapor/alcohol (n = 1-8) interfaces with unprecedented details. Previous approach on assignment of these spectra relied on IR and Raman spectral assignment, and they were not able to give such detailed assignment of the SFG vibrational spectra. Sometimes inappropriate assignment was made, and consequently misleading conclusions on interfacial structure, conformation and even dynamics were reached. With these polarization rules in addition to knowledge from IR and Raman studies, new structural information and understanding of the molecular interactions at these interfaces were obtained, and some new spectral features for the C-H stretching modes were also identified. Generally speaking, these new features can be applied to IR and Raman spectroscopic studies in the condensed phase. Therefore, the advancement on vibrational spectra assignment may find broad applications in the related fields using IR and Raman as vibrational spectroscopic tools.     

Non-invasive vibrational SFG spectroscopy reveals that bacterial adhesion can alter the conformation of grafted "brush" chains on SAM

Understanding bacterial adhesion on a surface is a crucial step to design new materials with improved properties or to control biofilm formation and eradication. Sum Frequency Generation (SFG) vibrational spectroscopy has been employed to study in situ the conformational response of a self-assembled monolayer (SAM) of octadecanethiol (ODT) on a gold film to the adhesion of hydrophilic and hydrophobic ovococcoid model bacteria. The present work highlights vibrational SFG spectroscopy as a powerful and unique non-invasive biophysical technique to probe and control bacteria interaction with ordered surfaces. Indeed, the SFG vibrational spectral changes reveal different ODT SAM conformations in air and upon exposure to aqueous solution or bacterial adhesion. Furthermore, this effect depends on the bacterial cell surface properties. The SFG spectral modeling demonstrates that hydrophobic bacteria flatten the ODT SAM alkyl chain terminal part, whereas the hydrophilic ones raise this ODT SAM terminal part. Microorganism-induced alteration of grafted chains can thus affect the desired interfacial functionality, a result that should be considered for the design of new reactive materials.     

Microscopic Investigation of Ethylene Carbonate Interface: A Molecular Dynamics and Vibrational Spectroscopic Study

Ethylene carbonate(EC) liquid and its vapor-liquid interface were investigated using a combination of molecular dynamics(MD)simulation and vibrational IR, Raman and sum frequency generation(SFG)spectroscopies. The MD simulation was performed with a flexible and polarizable model of the EC molecule newly developed for the computation of vibrational spectra. The internal vibration of the model was described on the basis of the harmonic couplings of vibrational modes, including the anharmonicity and Fermi resonance coupling of C=O stretching. The polarizable model was represented by the charge response kernel(CRK),which is based on ab initio molecular orbital calculations and can be readily applied to other systems. The flexible and polarizable model can also accurately reproduce the structural and thermodynamic properties of EC liquid. Meanwhile, a comprehensive set of vibrational spectra of EC liquid, including the IR and Raman spectra of the bulk liquid as well as the SFG spectra of the liquid interface, were experimentally measured and reported. The set of experimental vibrational spectra provided valuable information for validating the model, and the MD simulation using the model comprehensively elucidates the observed vibrational IR, Raman, and SFG spectra of EC liquid. Further MD analysis of the interface region revealed that EC molecules tend to orientate themselves with the C=O bond parallel to the interface. The MD simulation explains the positive Im[χ~((2))](ssp) band of the C=O stretching region in the SFG spectrum in terms of the preferential orientation of EC molecules at the interface. This work also elucidates the distinct lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra. The lineshapes of the C=O band are split by the Fermi resonance of the C=O fundamental and the overtone of skeletal stretching. The Fermi resonance of C=O stretching was fully analyzed using the empirical potential parameter shift analysis(EPSA) method. The apparently different lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra were attributed to the frequency shift of the C=O fundamental in different solvation environments in the bulk liquid and at the interface. This work proposes a systematic procedure for investigating the interface structure and SFG spectra, including general modeling procedure based on ab initio calculations, validation of the model using available experimental data, and simultaneous analysis of molecular orientation and SFG spectra through MD trajectories. The proposed procedure provides microscopic information on the EC interface in this study, and can be further applied to investigate other interface systems, such as liquid-liquid and solid-liquid interfaces.     

Sum frequency generation from Langmuir-Blodgett multilayer films on metal and dielectric substrates

Sum frequency generation (SFG) vibrational spectra of cadmium arachidate multilayer films adsorbed on a substrate with high nonresonant susceptibility, i.e., gold, and on a low nonresonant susceptibility substrate, i.e., fused quartz, have been investigated in the C-H stretching region in air. The films were formed by Langmuir-Blodgett (LB) deposition and their spectra recorded using SFG spectrometers employing both 532-nm nanosecond and 800-nm femtosecond lasers, with counter-propagating and co-propagating beam geometries, respectively. Both kinds of substrate were rendered hydrophobic by coating them with per-deuterated octadecanethiol (gold) or per-deuterated cadmium arachidate (fused quartz) monolayers. Single per-protonated arachidate layers in otherwise per-deuterated 10-layer films were used to show that the SFG resonances arise only from the topmost and lowermost layers in a LB film comprised of an even number of per-protonated layers, although the SFG spectra from the two hydrophobic substrates are different from each other. The differences in the spectra from the same ten-layer per-protonated films deposited on the two types of hydrophobic substrate have been explained in terms of a simple model that accounts for resonant and nonresonant contributions.     

Structure and reactivity of alkoxycarbonyl (ester)-terminated monolayers on silicon: sum frequency generation spectroscopy

Carboxylic acid-terminated monolayers on crystalline silicon surfaces can be readily modified with biological macromolecules for the fabrication of semiconductor-based biosensing devices. They were prepared by acid-catalyzed hydrolysis of alkoxycarbonyl (ester)-terminated monolayers and studied by vibrational sum frequency generation (SFG) spectroscopy. The C-H vibration region of the SFG spectra consists of strong methyl bands with significant contributions from methylene stretching modes, indicating that these monolayers are generally ordered but with considerable gauche defects in the alkyl chains in comparison with n-alkyl monolayers. After hydrolysis, the methylene stretching modes prevail, with "residues" of the methyl bands, indicating incomplete hydrolysis and disruption of the monolayer structure. This work demonstrates that SFG is capable of providing quantitative information on structure-reactivity correlations in organic monolayers.     

Molecular dynamics simulation of liquid methanol. II. Unified assignment of infrared, Raman, and sum frequency generation vibrational spectra in methyl C-H stretching region

Vibrational spectra of methyl C-H stretching region are notoriously complicated, and thus a theoretical method of systematic assignment is strongly called for in condensed phase. Here we develop a unified analysis method of the vibrational spectra, such as infrared (IR), polarized and depolarized Raman, and ssp polarized sum frequency generation (SFG), by flexible and polarizable molecular dynamics simulation. The molecular model for methanol has been developed by charge response kernel model to allow for analyzing the methyl C-H stretching vibrations. The complicated spectral structure by the Fermi resonance has been unraveled by empirically shifting potential parameters, which provides clear information on the coupling mechanism. The analysis confirmed that for the IR, polarized Raman, and SFG spectra, two-band structure at about 2830 and 2950 cm(-1) results from the Fermi resonance splitting of the methyl C-H symmetric stretching and bending overtones. In the IR spectrum, the latter, higher-frequency band is overlapped with prominent asymmetric C-H stretching bands. In the depolarized Raman spectrum, the high frequency band at about 2980 cm(-1) is assigned to the asymmetric C-H stretching mode. In the SFG spectrum, the two bands of the splitted symmetric C-H stretching mode have negative amplitudes of imaginary nonlinear susceptibility χ(2), while the higher-frequency band is partly cancelled by positive imaginary components of asymmetric C-H stretching modes.     

Spectroscopic and computational studies of aqueous ethylene glycol solution surfaces

The combination of Monte Carlo, ab initio, and DFT computational studies of ethylene glycol (EG) and EG-water hydrogen-bonding complexes indicate that experimental vibrational spectra of EG and EG-water solution surfaces have contributions from numerous conformations of both EG and EG-water. The computed spectra, derived from harmonic vibrational frequency calculations and a theoretical Boltzmann distribution, show similarity to the experimental surface vibrational spectra of EG taken by broad-bandwidth sum frequency generation (SFG) spectroscopy. This similarity suggests that, at the EG and aqueous EG surfaces, there are numerous coexisting conformations of stable EG and EG-water complexes. A blue shift of the CH2 symmetric stretch peak in the SFG spectra was observed with an increase in the water concentration. This change indicates that EG behaves as a hydrogen-bond acceptor when solvated by additional water molecules. This also suggests that, in aqueous solutions of EG, EG-EG aggregates are unlikely to exist. The experimental blue shift is consistent with the results from the computational studies.     

Piperidine adsorption on hydrated alpha-alumina (0001) surface studied by vibrational sum frequency generation spectroscopy

The adsorption of piperidine vapor on the hydrated alumina (alpha-Al2O3, corundum) (0001) surface was investigated using vibrational broad bandwidth and scanning sum frequency generation (SFG) spectroscopy. The interfacial vibrational signature in the C-H stretching region of piperidine at the alumina (0001) surface is shown to be a sensitive spectroscopic probe revealing the adsorption mechanism. The neat piperidine surface, aqueous piperidine surface, and aqueous piperidium chloride surface were also investigated in the C-H stretching region by SFG to establish vibrational reference frequencies. After piperidine adsorption, piperidine vapor was removed and piperidine was found to be chemisorbed onto the alumina (0001) surface through protonation by surface hydroxyl groups. The O-H stretching region of the alumina surface before and after piperidine adsorption was also investigated, and the results revealed the decrease of the surface number density of alumina surface hydroxyl groups.     

Absolute Orientation of Molecules with Competing Hydrophilic Head Groups at the Air/Water Interface Probed with Sum Frequency Generation Vibrational Spectroscopy

The constructive or destructive spectral interference between the molecular groups oriented up and down at the interface in the sum-frequency generation （SFG） spectra provides a direct measurement of the absolute orientation of these molecular groups. This simple approach can be employed to interrogate absolute molecular orientations other than using the complex absolute phase measurement in the SFG studies. We used the -CN group in the p-cyanophenol （PCP） molecule as the internal phase standard, and we measured the phases of the SFG fields of the -CN groups in the 3,5-dimethyl-4-hydroxy-benzonitrile （35DMHBN） and 2,6-dimethyl-4-hydroxy-benzonitrile （26DMHBN） at the air/water interface by measuring the SFG spectra of the aqueous surfaces of the mixtures of the PCP, 35DMHBN, and 26DMHBN solutions. The results showed that the 35DMHBN had its -CN group pointing into the aqueous phase; while the 26DMHBN, similar to the PCP, had its -CN group pointing away from the aqueous phase. The tilt angles of the -CN group for both the 35DMHBN and 26DMHBN molecules at the air/water interface were around 25°-45° from the interface normal. These results provided insights on the understanding of the detailed balance of the competing factors, such as solvation of the polar head groups, hydrogen bonding and hydrophobic effects, etc., on influencing the absolute molecular orientation at the air/water interface.     

Role of interfacial water on protein adsorption at cross-linked polyethylene oxide interfaces

Sum frequency generation (SFG) vibrational spectroscopy was used to study the structure of water at cross-linked PEO film interfaces in the presence of human serum albumin (HSA) protein. Although PEO is charge neutral, the PEO film/water interface exhibited an SFG signal of water similar to that of a highly charged water/silica interface, signifying the presence of ordered water. Ordered water molecules were observed not only at the water/PEO interface, but also within the PEO film. It indicates that the PEO and water form an ordered hydrogen-bonded network extending from the bulk PEO film into liquid water, which can provide an energy barrier for protein adsorption. Upon exposure to the protein solution, the SFG spectra of water at the water/PEO interface remained nearly unperturbed. For comparison, the SFG spectra of water/silica and water/polystyrene interfaces were also studied with and without HSA in the solution. The SFG spectra of the interfacial water were correlated with the amount of protein adsorbed on the surfaces using fluorescence microscopy, which showed that the amount of protein adsorbed on the PEO film was about 10 times less than that on a polystyrene film and 3 times less than that on silica.     

Rubbing-induced anisotropy of long alkyl side chains at polyimide surfaces

Molecular organization at polyimide surfaces used as alignment layers in liquid crystal displays was investigated using vibrational sum frequency generation (SFG) spectroscopy. We focus on the orientation of the long alkyl side groups at the polymer surface using polarization-selected SFG spectra of the CH(3)- and CH(2)-stretch modes of the side chain. Mechanical rubbing and baking, an accepted industrial procedure used to produce pretilt of the liquid crystal, was found to induce pronounced azimuthal anisotropy in the orientational distribution of the alkyl side chains. Orientational analysis of the SFG vibrational spectra in terms of the azimuthal and tilt angles (in and out of plane, respectively) of the alkyl side chains shows their preferential tilt along the rubbing direction, with the azimuthal distribution narrower for stronger rubbed polymer samples.     

Surface structural characterization of protein- and polymer-modified polystyrene microspheres by infrared-visible sum frequency generation vibrational spectroscopy and scanning force microscopy

Structural investigations of bare and surface-modified polystyrene microspheres (beads) have been carried out by infrared-visible sum frequency generation (SFG) vibrational spectroscopy and scanning force microscopy (SFM). Bead surfaces have been modified by either the covalent linking of immunoglobulin G (IgG) and bovine serum albumin (BSA) or the nonspecific adsorption of a Pluronic surfactant. After surface modification with protein, SFG signals in the aliphatic CH-stretch region are detected at both the buffer/bead and air/bead interfaces, indicating that some amino acid residues in proteins adopt preferred orientations. SFG results indicate that the hydrophobic poly(propylene glycol) moieties in the Pluronic order when adsorbed onto the bead, at both the buffer/bead and air/bead interfaces, whereas hydrophilic poly(ethylene glycol) groups align to a lesser extent. SFG spectra also show that the phenyl rings of bare polystyrene beads in contact with air or buffer are ordered, with a dipole component directed along the surface normal, but become less ordered after the adsorption of either proteins or the polymer. Molecular orientation and ordering at the bead surface affect its hydrophobicity and aggregation behavior. SFM results reveal the formation of nonuniform islands when bare beads with more hydrophobic character are spun-cast onto a silica substrate. In the presence of adsorbed protein, a hexagonal packing of beads, with some defects, is observed, depending on the bulk pH and the type of attached protein. Adsorbed Pluronic causes the beads to aggregate in a disordered fashion, as compared to the behavior of bare and protein-modified beads.     

Sum frequency generation studies at poly(ethylene terephthalate)/silane interfaces: hydrogen bond formation and molecular conformation determination

To better understand the effects of interfacial molecular orientation on adhesion to plastics, the interfaces between poly(ethylene terephthalate) (PET) and different silane coupling agents were probed using sum frequency generation (SFG) vibrational spectroscopy. The polymer/air interface was dominated by the ester carbonyl, methylene, and phenyl groups. Upon contacting the PET film with the amino-functional silane 3-aminopropyltrimethoxysilane (ATMS), the ester carbonyl stretch shifted to a lower energy indicating the formation of hydrogen bonds between the polymer surface and the silane molecules. This shift was not observed when silanes that contained no hydrogen bond donors, such as (3-glycidoxypropyl)-trimethoxysilane and n-butyltrimethoxysilane, were placed into contact with the PET surface. Further evidence of silane ordering at the interface was observed as vibrational peaks attributed to the C-H stretching of the silane methoxy headgroups dominated the PET/silane spectra. It was determined that the conformation of the ATMS molecules at the interface was such that the amino endgroups were oriented toward the interface while the methoxy headgroups were directed toward the silane bulk.     

Immobilization of amphiphilic polycations by catechol functionality for antimicrobial coatings

A new strategy for preparing antimicrobial surfaces by a simple dip-coating procedure is reported. Amphiphilic polycations with different mole ratios of monomers containing dodecyl quaternary ammonium, methoxyethyl, and catechol groups were synthesized by free-radical polymerization. The polymer coatings were prepared by immersing glass slides into a polymer solution and subsequent drying and heating. The quaternary ammonium side chains endow the coatings with potent antibacterial activity, the methoxyethyl side chains enable tuning the hydrophobic/hydrophilic balance, and the catachol groups promote immobilization of the polymers into films. The polymer-coated surfaces displayed bactericidal activity against Escherichia coli and Staphylococcus aureus in a dynamic contact assay and prevented the accumulation of viable E. coli, S. aureus, and Acinetobacter baumannii for up to 96 h. Atomic force microscopy (AFM) images of coating surfaces indicated that the surfaces exhibit virtually the same smoothness for all polymers except the most hydrophobic. The hydrophobic polymer without methoxyethyl side chains showed clear structuring into polymer domains, causing high surface roughness. Sum-frequency generation (SFG) vibrational spectroscopy characterization of the surface structures demonstrated that the dodecyl chains are predominantly localized at the surface-air interface of the coatings. SFG also showed that the phenyl groups of the catechols are oriented on the substrate surface. These results support our hypothesis that the adhesive or cross-linking functionality of catechol groups discourages polymer leaching, allowing the tuning of the amphiphilic balance by incorporating hydrophilic components into the polymer chains to gain potent biocidal activity.