Dilute solution properties of poly(α-methylstyrene–ethylene) “regular” sequence copolymers

“Regular” sequence copolymers having the structure {[? CH₂? C(CH₃)(C₆H₅)? ]_m(CH₂? CH₂)_n}_p with relatively small values of m and n were prepared by means of “living” polymerization techniques. The intrinsic viscosities of fractions of these copolymers were obtained in various solvents including a theta solvent. The molecular weights of these fractions were determined by the Archibald ultracentrifugal method. The results show that the intrinsic viscosity–molecular weight relations of the regular sequence copolymers are affected not only by the average composition of the copolymer, but also by the sequence length in the copolymer molecule. It is suggested that the effective conformation of a chain element in the copolymer is not always the same as that in the homopolymer.     

A novel phenyl–bromine ligand exchange reaction on germanium by boron tribromide

A novel phenyl–bromine ligand exchange reaction by BBr₃ on germanium was investigated that proceeds without breaking Ge CH₂Ar bond. Typically, the reaction between (PhCH₂)₃PhGe and BBr₃ resulted exclusively in the formation of (PhCH₂)₃GeBr. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of dicitrato- and dimalatogermanic acids on polycondensation of maleic anhydride with ethylene glycol

The catalytic activity of citric (H₄Citr) and malic (H₃Mal) acids, their coordination compounds with germanium(IV) H₂[Ge(HCit)₂] and H₂[Ge(Mal)₂], and germanium dioxide GeO₂ in polycondensation of maleic anhydride and ethylene glycol at various temperatures was studied (catalyst: ethylene glycol molar ratio 0.01: 1). The process kinetics was evaluated and the time of its completion was determined. The copolymerization kinetics of some of the prepared oligoesters with triethylene glycol dimethacrylate was studied, and the copolymer properties were determined.     

Two Different Products Observed in the Reaction of a Bis(germylene) with Molybdenum Hydride [Mo(H)Cp(CO)3]

The reaction of the dimeric bis(germylene) [Ge{3,5‐(CF₃)₂pz}₂]₂ ( 2 ) with protic molybdenum hydride [Mo(H)Cp(CO)₃] yielded two different products. In diethyl ether the divalent germylene readily inserts into the Mo–H σ‐bond and the product of the oxidative addition, [Ge(H){Mo}(pz)₂] ( 4 ) (with pz = 3,5‐disubstituted pyrazole, 3,5‐(CF₃)₂pz; {Mo} = [MoCp(CO)₃]), was isolated featuring a germanium(IV) hydride moiety. In toluene an interesting “cascade” reaction takes place furnishing a bis‐metal substituted digermane [{Mo}(H)(pz)Ge–Ge(pz)₂{Mo}]. Although the detailed mechanism of the reaction remains the subject of speculation it seems likely that a germylene, [Ge^II(pz){Mo}], inserts into the germanium(IV) hydrogen bond of [Ge(H){Mo}(pz)₂] under formation of a germanium‐germanium bond, which is a rare reaction behaviour.     

Tuning thermal stability and electronic properties of germanium oxide on Ge(001) surface with the incorporation of nitrogen

The application of germanium as a channel material of transistors in near future requires an improved understanding of the interface between germanium and its potential passivation layer. In this study, we study effects of nitrogen incorporation on the thermal stability and electronic properties of GeO_xN_y/Ge interface by using high‐resolution X‐ray photoemission spectroscopy. We find that with the increasing nitrogen concentration in the GeO_xN_y films, the thermal stability can be increased, while the valence band offset with the Ge(001)substrate is decreased. First‐principles calculations further suggest that the unpaired p orbitals of nitrogen atoms induce electronic states near valence band edge, contributing to the reduction of the valence band offset. Our results provide a possibility to tune electronic and thermal properties of GeO_xN_y/Ge interface by controlling nitrogen concentrations during the growth.     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Matrixreaktion von GeO mit F2. IR-spektroskopischer nachweis von molekularem OGeF2

GeO reacts with F₂ in an argon matrix after photolysis with a high-pressure mercury lamp to form OGeF₂. Isotopic splitting (¹⁶O/¹⁸O and ⁷⁰Ge/⁷²Ge/⁷⁴Ge) and force constant calculations show that the fundamentals observed can be assigned to a planar molecule OGeF₂. The value of the force constant of the GeO double bond, 7.43 × 10² N m^?1, is as expected (GeO₂ 7.32 × 10² N m^?1), but the GeF bond is unexpectedly weak (f_GeF = 5.01 × 10² N m^?1).     

Synthesis of poly(hydroxymethylene-co-ethylene) by hydrogenation of the ethylene and carbon monoxide copolymer obtained by radical initiator with Ru/α-alumina and oxygen gas permeability

A new polymer (polyalcohol) was synthesized by hydrogenation of an ethylene carbon monoxide (CO) copolymer produced by a radical method with a catalyst and H₂. The Ru/α-alumina catalyst systems showed an excellent activity for hydrogenation of the radical copolymer of CH₂CH₂ and CO. Films prepared by melting and pressing the synthesized polyalcohol had a high gas barrier property and high tensile modulus. This new polymer has hydroxymethylenic units [ CH(OH) ] and ethylenic units [ CH₂CH₂ ] in its molecular structure. The new functional polymer poly(hydroxymethylene-co-ethylene),  [ CH(OH) ]_n[ CH₂CH₂ ]_m , is amorphous and has excellent and important properties as a high oxygen gas barrier film for wrapping and storage. This may be attributed to the new structure of poly(hydroxymethylene-co-ethylene) (PHME as an IUPAC name), or ethylene methine alcohol copolymer (EMOH as a generic name), compared to the other ethylene vinyl alcohol copolymer (EVOH as a generic name),  [ CH₂CH₂ ]_m [ CH₂CH(OH) ]_n , which is used as one of the highest gas barrier polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 889–900, 1998     

Fluorescence emission of amphiphilic copolymers bearing benzimidazole groups: Stimuli‐responsive behaviors in aqueous solution

A stimuli‐responsive amphiphilic copolymer poly(NIPAM_m‐b‐VBNBI_n), including N‐isopropylacrylamide (NIPAM) as a thermoresponsive unit and 1‐(4‐vinyl benzyl)‐2‐naphthyl‐benzimidazole (VBNBI) as a sensitive fluorophore unit, was designed and synthesized by reversible addition‐fragmentation chain transfer polymerization. The aqueous solutions of the copolymers exhibited reversible fluorescent response to pH and temperature. In addition, the copolymers showed aggregation‐induced fluorescence enhancement in THF/water mixture. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4459–4466     

Ultrathin self-assembled polymeric films on solid surfaces. I. Synthesis and characterization of acrylate copolymers containing alkyl disulfide side chains

Copolymers of 2-hydroxyethyl acrylate and 2-methoxyethyl acrylate with variable compositions were synthesized, fractionated, and characterized by ¹H-NMR, IR, GPC, and viscometry. These copolymers were further modified via polymer analog esterification of copolymer hydroxy groups by a series of disulfide-containing carboxylic acids including lipoic acid and (n-pentyldithio) alkyl carboxylic acids (n-C₅H₁₁SS(CH₂)m? COOH, m = 10, 15, 22) in the presence of 1,3-dicyclohexylcarbodiimide (DCC). Esterification reactions were quantitative for copolymers possessing hydroxy monomer contents ≤ 40% when excess acid and DCC were present for sufficiently long reaction times (2–4 days) at room temperature. Copolymer DSC analysis demonstrates a systematic variation of T_g with copolymer composition in good agreement with ideal mixing theory. These disulfide-bearing copolymers spontaneously yield two-dimensional ultrathin polymer films with side chain-dependent layer thicknesses of 20–45 Å by solution adsorption onto freshly deposited gold surfaces. Such ultrathin polymer films are expected to have diverse applications as bound polymeric surface modification reagents. © 1993 John Wiley & Sons, Inc.     

New Layered Materials in the K–In–Ge–As System: K8In8Ge5As17and K5In5Ge5As14

Exploratory synthesis in the K–In–Ge–As system has yielded the unusual layered compounds K₈In₈Ge₅As₁₇(1) and K₅In₅Ge₅As₁₄(2), both of which contain In–Ge–As layers with interleaved potassium ions, Ge–Ge bonds, InAs₄tetrahedra, As–As bonds, and rows of Ge₂As₆dimers. Compound 1 has As₃groups, while compound 2 has infinite As ribbons on both faces of each layer. Unlike compound 1, compound 2 has substitutional defects where indium partially occupies each of the three independent germanium sites in the ratio of 1:5 for In:Ge. This partial occupancy makes 2 an electron-precise compound. The Ge(In)–Ge(In) bond of 2 is longer than the Ge–Ge bond of 1, and this bond lengthening effect was confirmed by performing DFT-MO calculations on the model compounds H₃Ge–GeH₃and H₃Ge–InH⁻₃. Possible implications of electron imprecise formulas determined by X-ray crystal structure determinations are discussed. Compound 1: space groupP2₁/cwitha=18.394 (8) Å,b=19.087 (7) Å,c=25.360 (3) Å,β=105.71 (2)°,V=8571 (4) ų, andD_calcd=4.45g/cm³forZ=4. Refinement on 4455 reflections yieldedR(R_w)=6.8%(7.8%). Compound 2: space groupC2/mwitha=40.00 (1) Å,b=3.925 (2) Å,c=10.299 (3),β=99.97 (2)°,V=1592 (1) ų, andD_calcd= 4.55g/cm³forZ=8. Refinement on 1206 reflections yieldedR(R_w)=5.6% (5.7%).     

Breadth of glass transition temperature in styrene/acrylic acid block,random, and gradient copolymers: Unusual sequence distribution effects

Block, random, and gradient copolymers of styrene (S) and acrylic acid (AA) are synthesized by conventional or controlled radical polymerization, and their glass transition temperature (T_g) behaviors are compared. The location and breadth of the T_gs are determined using derivatives of differential scanning calorimetry heating curves. Each S/AA random copolymer exhibits one narrow T_g, consistent with a single phase of limited compositional nanoheterogeneity. Block copolymers exhibit two narrow T_gs originating from nanophase separation into ordered domains with nearly pure S or nearly pure AA repeat units. Each gradient copolymer exhibits a T_g response with a ～50–56 °C breadth that extends beyond the upper T_g of the block copolymers. For copolymers of similar composition, the maximum value in the gradient copolymer T_g response is consistent with that of a random copolymer, which has an enhanced T_g relative to poly(acrylic acid) due to more effective hydrogen bonding when AA units are separated along the chain backbone by S units. These results indicate that gradient copolymers with ordered nanostructures can be rationally designed, which exhibit broad glass transitions that extend to higher temperature than the T_gs observed with block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2842–2849, 2007     

Conformational behavior of styrene–p-chlorostyrene triblock copolymers in dilute solutions. I. Composition dependence of conformational behavior

Dilute solution properties of (styrene-p-chlorostyrene) triblock copolymers in various solvents were studied over a wide range of molecular weight and composition. Viscosity and osmotic pressure results indicate that the conformational behavior of the B_mA_nB_m and A_mB_nA_m copolymers (A = styrene; B = p-chlorostyrene; m and n denote the number of units) are similar in nonselective solvents such as toluene and 2-butanone, but different in selective solvents such as carbon tetrachloride and cumene. Short-range and long-range interaction parameters of the block copolymers were determined by applying the Stockmayer–Fixman method to viscosity data and also by application of the equation relating the osmotic virial coefficient and the excluded volume. The results show that the unperturbed dimensions of the block copolymers vary linearly with composition, and long-range interaction parameters in nonselective solvents can be expressed by those of the parent homopolymers, the chemical composition, and values of the interaction parameter β_AB between styrene and p-chlorostyrene monomeric units.     

Amphiphilic maleic acid-containing alternating copolymers—2. Dilute solution characterization by light scattering,intrinsic viscosity,and PGSE NMR spectroscopy

The dilute solution behavior of several alternating copolymers of maleic acid has been characterized by static and dynamic light scattering, intrinsic viscosity, and pulsed-gradient spin-echo NMR spectroscopy. The copolymer of maleic acid–sodium salt and isobutylene (IBMA-Na, M_w ∼350 kg/mol) dissolves readily in concentrated aqueous salt solutions. Changes in chain dimensions with ionic strength and pH are similar to those of the lesser salt solution-soluble poly(acrylic acid-sodium salt). The hydrophobically modified (with n-butyl, n-hexyl, n-octyl, and phenethyl amines) copolymers of maleic acid–sodium salts and isobutylene (IBMA-NHR-Na) show no sign of large intermolecular aggregation in 0.1 N sodium acetate (NaAc). However, the sizes of the copolymers are relatively small compared to that of the ionized parent copolymer (IBMA-Na, M_w ∼350 kg/mol), suggesting intramolecular aggregation of the alkyl side-chain groups along the polymer backbone. The copolymer modified with the longer chain n-decyl, on the other hand, forms stable large intermolecular aggregates containing 33 chains/aggregate. The copolymers of maleic acid–sodium salt and styrene (SMA-Na) appear to have no signs of aggregation, despite being a hydrophobic polyelectrolyte. The copolymer of maleic acid–sodium salt and di-isobutylene (DIBMA-Na) has a similar salting-out concentration as SMA-Na. The radius of gyration measurements by static light scattering suggest that at least some fraction of the DIBMA-Na chains form large intermolecular aggregates. The copolymers of maleic acid–sodium salt with n-alkenes (n-C_mMA-Na) in 0.1 N NaAc form small intermolecular aggregates (three to five chains/aggregate). In contrast to these static light scattering results, PGSE NMR diffusion measurements for the above aggregated systems indicate only one diffusion coefficient consistent with the motion of single isolated chains. A plausible explanation for this discrepancy is that the population of the aggregates is too small to be sufficiently detected in the PGSE NMR experiment. Furthermore, it is likely that the aggregate has a larger relaxation rate than the nonaggregate, and therefore has a comparatively reduced signal in the PGSE NMR experiment. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3584–3597, 2004     

Synthesis of arborescent styrene homopolymers and copolymers from epoxidized substrates

The synthesis of arborescent styrenic homopolymers and copolymers was achieved by anionic polymerization and grafting. Styrene and p‐(3‐butenyl)styrene were first copolymerized using sec‐butyllithium in toluene, to generate a linear copolymer with a weight‐average molecular weight M_w = 4000 and M_w/M_n = 1.05. The pendant double bonds of the copolymer were then epoxidized with m‐chloroperbenzoic acid. A comb‐branched (or arborescent generation G0) copolymer was obtained by coupling the epoxidized substrate with living styrene‐p‐(3‐butenyl)styrene copolymer chains with M_w ≈ 5000 in a toluene/tetrahydrofuran mixture. Further cycles of epoxidation and coupling reactions while maintaining M_w ≈ 5000 for the side chains yielded arborescent copolymers of generations G1–G3. A series of arborescent styrene homopolymers was also obtained by grafting M_w ≈ 5000 polystyrene side chains onto the linear and G0–G2 copolymer substrates. Size exclusion chromatography measurements showed that the graft polymers have low polydispersity indices (M_w/M_n = 1.02–1.15) and molecular weights increasing geometrically over successive generations. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A New Germanium Complex Containing Chelating Pyridinecarboxylate Ligands: cis‐Dihydroxybis(pyridine‐2‐carboxylato‐κN1,κO2)germanium Hydrate (1 : 2) (cis‐[Ge(pyca)2(OH)2]⋅2 H2O)

A new germanium complex, cis‐[Ge(pyca)₂(OH)₂]?2 H₂O ( 1 ; pyca=pyridine‐2‐carboxylato), was synthesized by the reaction of [Ge(acac)₂Cl₂] (acac=acetylacetonato=pentane‐2,4‐dionato) with potassium pyridine‐2‐carboxylate (Kpyca) in H₂O/THF. According to the single‐crystal X‐ray diffraction analysis, each Ge‐atom of 1 is coordinated by two pyca ligands and two OH^? groups (Fig. 1). These molecules are bonded to each other via a system of H‐bonds resulting in a sheet‐like structure (Fig. 2). The complex is decomposed during heating with stepwise mass loss and formation of GeO₂ as final product (Fig. 3).     

Amphiphilic polymer gel electrolytes. II. Influence of the ethylene oxide side‐chain length on the gel properties

Amphiphilic polymers consisting of copolymethacrylates carrying about 26 wt % ethylene oxide [(EO)_n] side chains of different lengths were used as matrices in gel electrolytes. The gel electrolytes were composed of 30 wt % copolymer and 70 wt % 1 M LiPF₆ in a mixture of ethylene carbonate and γ‐butyrolactone (2/1 w/w). The coordination of lithium ions by the (EO)_n side chains in competition with the solvent was studied by Raman spectroscopy. A significantly stronger lithium coordination was observed when the gel electrolyte was based on a copolymer carrying (EO)₉ units in comparison with copolymers having (EO)₁, (EO)₂, and (EO)₄ units. Despite the observed stronger lithium coordination by (EO)₉ units in the gel, the ion conductivity was not significantly lower with respect to the gels based on the other copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1519–1524, 2001     

RAFT synthesis of polystyrene‐block‐poly(polyethylene glycol monomethyl ether acrylate) for zinc phthalocyanine‐loaded polymeric micelles as photodynamic therapy photosensitizers

A series of polystyrene‐block‐poly(polyethylene glycol monomethyl ether acrylate) (PSt_m‐b‐PPEGA_n) polymers were systematically synthesized as carriers for zinc phthalocyanine (ZnPc) for photodynamic therapy via reversible addition and fragmentation chain transfer polymerization. The degree of polymerization of the styrene (m) and PEGA units (n) of the resulting block copolymers were characterized to be n = 174, 40, and 18 for m = 52; and n = 200, 84, and 31 for m = 30. All the block copolymers formed micelles in water. The critical micelle concentration (CMC) of the PSt_m‐b‐PPEGA_n was determined by fluorometry using pyrene as a hydrophobic probe. The CMC value increased from 4.5 to 20 mg·L⁻¹ with an increase in the mole fraction of PEGA units. The median diameters of the micelles increased from 19 to 31 nm for PSt₅₂‐b‐PPEGA_n and from 15 to 23 nm for PSt₃₀‐b‐PPEGA_n with increasing n value. ZnPc‐loaded micelles were prepared by dialysis of the block copolymer in the presence of ZnPc followed by removal of large aggregates by filtration. The encapsulation efficiency was dramatically changed in the range of 0–68%. The light‐dose‐dependent cytotoxicity of the ZnPc‐loaded PSt₃₀‐b‐PPEGA₂₀₀ was clearly established in HeLa cell lines; while no cytotoxicity was confirmed under the dark. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 560–570     

Organogermane homopolymers and copolymers with organosilane

The first high molecular weight soluble, formable organogermane homopolymer (n-Bu₂Ge)_n was synthesized by the sodium coupling of n-Bu₂GeCl₂ in toluene. Soluble organogermane/organosilane copolymers [(X₂Ge)_x(YZSi)_y]_n were prepared by sodium coupling of X₂GeCl₂ and YZSiCl₂ in different molar ratios (X = n-bu, Ph; Y = n-hexyl, cyclohexyl; Z = Me). Germanium-containing polymers and copolymers with organosilanes are highly absorbing between 300–360 nm, with the absorption maxima dependent on the nature of the substituent and the ratio of X₂Ge:YZSi in the polymer. These polymers are photoactive and display bleaching behavior with photoscission.     

Thallium(III) coordination compounds: chemical information from 205Tl NMR longitudinal relaxation times

²⁰⁵Tl longitudinal relaxation rate measurements were performed on several thallium(III) complexes with the composition Tl(OH)_n(H₂O)_6?n^(3?n)+ (n = 1,2), Tl(Cl)_n(H₂O)_m?n^(3?n)+, Tl(Br)_n(H₂O)_m?n^(3?n)+ (m = 6 for n = 1–2, m = 5 for n = 3, m = 4 for n = 4), Tl(CN)_n(H₂O)_m?n^(3?n)+ (m = 6 for n = 1–2, m = 4 for n = 3–4) in aqueous solution, at different magnetic fields and temperatures. ¹³C and ²D isotopic labelling and ¹H decoupling experiments showed that the contribution of the dipolar relaxation path is negligible. The less symmetric lower complexes (n < 4) had faster relaxation rate dominantly via chemical shift anisotropy contribution which depended on the applied magnetic field: T₁ values are between 20 and 100 ms at 9.4 T and the shift anisotropy is Δσ = 1000–2000 ppm. The tetrahedral complexes, n = 4, relax slower; their T₁ is longer than 1 s and the spin–rotation mechanism is probably the dominant relaxation path as showed by a temperature dependence study. In the case of the TlCl₄^? complex, presumably a trace amount of TlCl₅^2? causes a large CSA contribution, 300 ppm. Since the geometry and the bond length for the complexes in solution are known from EXAFS data, it was possible to establish a correlation between the CSA parameter and the symmetry of the complexes. The relaxation behaviour of the Tl–bromo complexes is not in accordance with any known relaxation mechanism. Copyright © 2002 John Wiley & Sons, Ltd.