爆炸载荷下分层梯度泡沫铝夹芯板的失效模式与抗冲击性能

采用弹道冲击摆系统开展了爆炸载荷下分层梯度泡沫铝夹芯板的变形/失效模式和抗冲击性能实验研究，并配合激光位移传感器得到试件后面板中心点的挠度-时程响应曲线。研究了炸药当量和芯层组合方式对夹芯板试件变形/失效模式和抗冲击性能的影响。实验结果表明，泡沫铝夹芯板的变形/失效模式主要表现为面板的非弹性大变形，芯层压缩变形、芯层拉伸断裂以及芯层剪切失效。在研究爆炸冲量范围内，非梯度芯层夹芯板的抗冲击性能明显优越于所有分层梯度芯层夹芯板。对于分层梯度夹芯板试件，爆炸冲量较小时芯层组合形式对分层梯度芯层夹芯板的抗冲击性能的影响不大，而爆炸冲量较大时，最大相对密度芯层靠近前面板组合形式的分层梯度夹芯板试件抗冲击性能较好。研究结果可为泡沫金属夹芯结构的优化设计提供参考。     

多层梯度点阵夹芯结构抗爆性能研究

基于CONWEP对多层梯度点阵夹芯板在爆炸载荷下的动态响应进行了模拟研究。在相同爆炸载荷下,对四种梯度点阵模型的后面板中心挠度峰值进行了对比分析,讨论了各模型每层芯子的总变形能随相对密度比的变化规律,并对多层点阵夹芯板各层的变形情况进行了比较。分析结果表明:对于三层金字塔点阵夹芯结构,强弱相间的点阵夹芯板充分利用了前两层芯子的变形吸能,从而对第三层芯子和后面板起到了很好的保护作用;且在350g TNT炸药和200mm爆距的爆炸载荷下,相对密度比为0.5的强弱相间点阵夹芯板的后面板中心挠度峰值最小,抗爆冲击性能最优。     

爆炸载荷作用下铝蜂窝夹芯板的动力响应

为了考察铝蜂窝夹芯板在爆炸载荷下的动态响应,采用自行设计的冲击摆系统,用激光位移传感器测定了爆炸载荷作用在铝蜂窝夹芯板上的冲量,对夹芯板的变形和失效模式进行了归类和分析,并就芯层的几何尺寸、炸药当量及板厚对其响应的影响进行了系统研究。给出的理论分析结果与实验结果吻合较好。     

电炮加载下芳纶蜂窝夹芯板的动力响应

研究了方形钛-芳纶蜂窝夹芯板在电炮驱动的高速聚酯飞片撞击加载下的动力响应,给出了面板和蜂窝芯层在不同冲击速度下的变形及失效模式。采用VISAR(velocity interferometer system for any reflector)测速技术测量了后面板中心点的速度时程,分析了芳纶蜂窝夹芯板的动态响应过程,讨论了冲击速度对夹芯板动力响应和抗冲击能力的影响。研究结果表明,低波阻抗的芳纶蜂窝破碎行为阻断了应力波向后面板的传播途径,破碎的蜂窝和塑形大变形的前面板吸收了高速冲击的大部分能量,充分发挥了钛合金的高强度和芳纶蜂窝的缓冲吸能特性,提高了夹芯板整体的防护能力。     

爆炸载荷作用下铝蜂窝夹芯板动力响应研究

采用自行设计的冲击摆实验系统对铝蜂窝夹芯板在爆炸载荷作用下的动力响应进行了系统实验研究,给出了面板和铝蜂窝不同区域的不同变形模态,得到了不同炸药当量对铝蜂窝夹芯板动态响应的影响规律,证实了铝蜂窝夹芯板产生较大塑性变形时,比一般的结构具有更好的能量吸收特性.并利用LS-DYNA对其动力响应进行了数值仿真,考察了炸药起爆、接触界面及上表面接触力对夹芯板变形影响的全过程,得到了板中心的最终变形和芯层的变形模式,与实验结果吻合较好.     

爆炸载荷下双向梯度仿生夹芯圆板的力学行为

基于王莲仿生面内梯度芯层,通过引入面外梯度,设计了一种双向梯度仿生夹芯圆板。在此基础上,运用ABAQUS有限元软件,对不同排列方式的双向梯度夹芯圆板在不同爆炸载荷作用下的响应进行了数值仿真,着重分析了不同仿生夹芯圆板的前后面板挠度、芯层压缩量、变形模式和能量吸收等特性,得到了一种抗爆性能较好的芯层排列方式。结果表明:相较于单一的面外梯度夹芯圆板,合理设计的双向梯度仿生夹芯圆板可以有效降低后面板挠度,并提高芯层的能量吸收。     

PVC夹芯板在冲击载荷下的动态响应与失效模式

通过开展对泡沫金属子弹撞击加载聚氯乙烯(polyvinyl chloride, PVC)夹芯板的实验,结合三维数字图像相关性(three dimensional digital image correlation, DIC-3D)技术,研究固支夹芯板在撞击加载条件下的动态响应,获得夹芯板受撞击及响应的变形过程,并结合图像分别分析夹芯板整体及三层结构的变形和失效模式;研究子弹冲量与背板最终变形之间的关系和相似冲量下等面密度不同芯层密度的夹芯结构的抗撞击性能。结果表明:夹芯板的破坏和失效主要集中在泡沫金属子弹直接作用区域,背板挠度由中间向固定端逐渐减小,子弹冲量与背板变形近似成线性关系。在等质量的条件下,降低芯层密度、增加芯层厚度可以有效降低背板的变形,实验结果对聚合物夹芯结构的工程优化设计具有一定的参考意义。     

星型负泊松比超材料防护结构抗爆抗冲击性能研究

采用数值方法对星型宏观负泊松比效应夹芯结构的抗冲击响应过程以及抗水下爆炸过程中的破坏形式进行了研究:探讨了星型负泊松比结构胞元壁厚、层数和胞元泊松比等参数对弹体侵彻及水下爆炸防护性能的影响。研究结果表明:对于高速或超高速弹体侵彻问题，单纯依靠结构性的被动防御无法应对；负泊松比效应蜂窝夹芯防护结构相较常规防护结构具有良好的水下抗爆性能；等质量条件下，泊松比的变化对抗爆性能影响明显，层数3层、泊松比为?1.63的星型夹芯结构的抗爆性能相对更优；等壁厚条件下，其水下抗爆性能随蜂窝胞元层数减小而增强。     

撞击载荷下Nomex蜂窝夹芯梁的变形模式研究

本文研究了Nomex蜂窝夹芯结构在不同冲量下的变形模式和失效模式.实验采用子弹撞击的加载方式,对Nomex蜂窝夹芯梁施加大小不同的冲量,使用激光位移传感器测量每个试件后蒙皮的变形位移.分析了同芯层厚度,不同蒙皮厚度的Nomex蜂窝夹芯梁在不同冲量作用下抵抗变形的能力,以及冲量大小与蒙皮厚度对夹芯梁抵抗撞击能力的影响,计算分析了蒙皮与芯层的吸能性.实验结果表明:增加蒙皮的厚度能够改善夹芯梁在撞击荷载下抵抗变形的能力,在撞击过程中芯层吸收了50％左右的能量,且冲量越大,芯层吸收的能量越多.     

负泊松比蜂窝材料抗爆炸特性及优化设计研究

为了深入研究车辆底部防护组件爆炸冲击下的结构响应，提高防护型车辆的抗爆炸冲击性能，建立了某车辆底部防护组件在爆炸冲击下的有限元模型，并进行爆炸冲击台架试验验证了有限元模拟的可靠性；将内凹六边形负泊松比蜂窝材料作为防护组件的夹芯部分，分析负泊松比蜂窝材料在爆炸冲击下的变形模式，并对比了同等质量的其他3种防护组件的抗爆炸冲击性能。结果表明，含有负泊松比蜂窝夹芯的防护组件具有更优的抗爆性能。建立了以内凹六边形负泊松比蜂窝胞元尺寸参数为设计变量的多目标优化问题的数学模型，采用多目标遗传算法获得胞元几何参数的最优方案，有效降低了防护组件基板的最大挠度和最大动能。     

孔结构金属复合夹芯板抗爆炸冲击响应及吸能特性研究

采用有限元方法研究爆炸载荷下四边固支孔结构金属复合夹芯板的动力响应及吸能特性，给出了孔结构金属复合夹芯板的动力响应过程，得到夹芯板的变形模式，比较了孔结构金属复合夹芯板与非孔结构金属复合夹芯板的抗爆炸冲击性能，同时讨论了孔大小、间距、排布方式和面板质量分布等因素对孔结构金属复合夹芯板抗爆炸冲击性能的影响。研究结果表明，迎爆面外面板的孔设计使爆炸冲击波穿过孔洞直接作用在芯材上，增强了芯材的压缩，从而提高了夹芯板的能量吸收能力。同等面密度情况下，内外面板厚度比大于1的孔结构金属复合夹芯板变形挠度小于内外面板厚度比小于1的孔结构金属复合夹芯板。进一步研究发现，通过合理设计内外面板的质量分布，可以使孔结构金属复合夹芯板的抗爆炸冲击性能最优。     

轻质金属泡沫夹芯曲板的抗爆炸冲击响应研究

夹芯结构具有高比强度、高比刚度和优异的吸能能力,已经被广泛应用于工程结构用来抵御高强度的爆炸冲击载荷。本文采用有限元数值模拟方法研究了爆炸载荷作用下四边固支夹芯曲板的动力响应。比较了同等质量下夹芯曲板、夹芯平板、实体曲板和实体平板四种结构的抗爆炸冲击性能,讨论了不同曲率和非对称因子对结构动力响应的影响,得到了使得夹芯曲板抗爆炸性能最佳的非对称因子。研究结果表明：夹芯曲板的抗爆炸冲击性能优于等质量的夹芯平板、实体曲板和实体平板结构,增大夹芯曲板的曲率能够提高结构的抗爆炸冲击性能。     

A lattice deformation based model of metallic lattice sandwich plates subjected to impulsive loading

A lattice structure deformation mechanism based theoretical model is developed to predict the dynamic response of square lattice sandwich plates under impulsive loading. The analytical model is established on the basis of the three-stage framework proposed by Fleck and Deshpande (2004). In the first stage, the impulse transmitted from air shock loading to the sandwich plates by fluid-structure interaction is analytically calculated. The lattice core suffers non-uniform compression in the second stage due to the clamped boundary conditions. The structure deformation mechanism is introduced in the lattice core compression and the analytical nominal stress–strain curve of core compression accords well with previous experimental results. In the final stage, the sandwich plate is analyzed as a continuum plate with non-uniform thickness deduced by inconsistent deformation of the front and back sheets.The experiment results of square metallic sandwich plates with tetrahedral lattice core are presented and compared with analytical prediction to validate the theoretical model. Good agreements are found between the predicted and testing results for both the impulse transmitted to the sandwich plates and the maximum deflection of the back face sheet.     

The blast resistance of sandwich composites with stepwise graded cores

Shock tube experiments were performed to study the dynamic response of sandwich panels with E-Glass Vinyl Ester (EVE) composite face sheets and stepwise graded styrene foam cores. Two types of core configurations, with identical areal density, were subjected to the shock wave loading. The core layers were arranged according to the density of the respective foam; configuration 1 consisted of low/middle/high density foams and configuration 2 consisted of middle/low/high density foams. The method to calculate the incident and reflected energies of the shock wave, as well as the deformation energy of the specimen, were proposed based on the shock wave pressure profiles and the high speed deflection images that were obtained. The experimental results showed that configuration 1 outperformed configuration 2 in regards to their blast resistance. Significant core material compression was observed in configuration 1, while in configuration 2 the core layers disintegrated and the front skin (blast side) fractured into two pieces along the midsection. The estimated energies were then calculated for both configurations. The total energy difference between the incident and reflected energies was almost identical, even though the deformation energy for configuration 2 was larger.     

Two new refined shear displacement models for functionally graded sandwich plates

Two refined displacement models, RSDT1 and RSDT2, are developed for a bending analysis of functionally graded sandwich plates. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The developed models are variationally consistent, have strong similarity with classical plate theory in many aspects, do not require shear correction factor, and give rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress-free surface conditions. The accuracy of the analysis presented is demonstrated by comparing the results with solutions derived from other higher-order models. The functionally graded layers are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson’s ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Numerical results for deflections and stresses of functionally graded metal–ceramic plates are investigated. It can be concluded that the proposed models are accurate and simple in solving the bending behavior of functionally graded plates.     

Blast Performance of Sandwich Composites with In-Plane Compressive Loading

An experimental investigation was conducted to evaluate the dynamic performance of E-glass Vinyl Ester composite face sheet / foam core sandwich panels when subjected to pre-compression and subsequent blast loading. The sandwich panels were subjected to 0 kN, 15 kN and 25 kN of in plane compression respectively, prior to transverse blast wave loading with peak incident pressure of 1 MPa and velocity of 3 Mach. The blast loading was generated using a shock tube facility. During the experiments, a high-speed photographic system utilizing three digital cameras was used to acquire the real-time 3-D deformation of the sandwich panels. The 3D Digital Image Correlation (DIC) technique was used to quantify the back face out-of-plane deflection and in-plane strain. The results showed that in-plane compressive loading facilitated buckling and failure in the front face sheet. This mechanism greatly reduced the blast resistance of sandwich composites.     

内爆炸载荷下梯度泡沫铝夹芯管的动态响应

基于3D-Voronoi技术构建了泡沫铝芯层的三维细观有限元模型，对梯度泡沫铝夹芯管在内爆炸载荷下的动态响应进行了数值模拟。分析讨论了夹芯管结构内外管的壁厚、泡沫芯层的相对密度、芯层梯度分布等参数对夹芯管结构的抗爆性能与吸能性能的影响，并与无芯层的双层圆管进行了对比。结果表明:泡沫材料的相对密度可通过改变泡沫胞元大小和胞元壁厚进行调控，利用两种方式构建的夹芯管计算结果一致；保持内、外圆管总质量不变，增大内管壁厚可以有效减小外管的塑性变形，但会影响泡沫芯层的能量耗散；泡沫芯层的填充可以有效降低内管的塑性变形，正梯度泡沫铝夹芯管的抗爆性能优于均匀泡沫及负梯度泡沫夹芯管。     

A comprehensive analysis of functionally graded sandwich plates: Part 1—Deflection and stresses

A two-dimensional solution is presented for bending analysis of simply supported functionally graded ceramic–metal sandwich plates. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity and Poisson’s ratio of the faces are assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. We derive field equations for functionally graded sandwich plates whose deformations are governed by either the shear deformation theories or the classical theory. Displacement functions that identically satisfy boundary conditions are used to reduce the governing equations to a set of coupled ordinary differential equations with variable coefficients. Numerical results of the sinusoidal, third-order, first-order and classical theories are presented to show the effect of material distribution on the deflections and stresses.