同轴数字全息用于血吸虫尾蚴检测研究

由于水的表面易出现抖动或波动情况,而传统的显微镜成像需要精确的光学焦聚过程,因此不适于观察漂浮于水表面的血吸虫尾蚴.本文论述了用同轴数字全息检测血吸虫尾蚴的基本原理.通过对再现像进行小波分析发现,偏离焦点时的小波变换高频系数的幅值比聚焦时要小得多.针对这一特点,本文对小波变换清晰度评价函数进行了改进,将原来利用高频系数之和改为利用聚焦窗口中高频系数的最大幅值为清晰度评价依据.在模拟实验结果中清晰度评价函数极大值出现在再现距离与记录距离相等处,说明了该算法的准确性.建立了用于血吸虫尾蚴检测的实验装置,可方便获取普通显微图像及数字全息图.实验结果表明,本文提出的算法能实现实际情况下的数字全息自动聚焦,其再现像的分辨率与装有1倍显微镜头的数码显微镜分辨率相当,足以清晰地分辨出血吸虫尾蚴的尾部分叉特征.利用同轴数字全息技术可在水面与图像传感器之间的距离不确定的情况下实现对血吸虫尾蚴的检测.     

同轴数字全息用于血吸虫尾蚴检测研究

由于水的表面易出现抖动或波动情况,而传统的显微镜成像需要精确的光学焦聚过程,因此不适于观察漂浮于水表面的血吸虫尾蚴.本文论述了用同轴数字全息检测血吸虫尾蚴的基本原理.通过对再现像进行小波分析发现,偏离焦点时的小波变换高频系数的幅值比聚焦时要小得多.针对这一特点,本文对小波变换清晰度评价函数进行了改进,将原来利用高频系数之和改为利用聚焦窗口中高频系数的最大幅值为清晰度评价依据.在模拟实验结果中清晰度评价函数极大值出现在再现距离与记录距离相等处,说明了该算法的准确性.建立了用于血吸虫尾蚴检测的实验装置,可方便获取普通显微图像及数字全息图.实验结果表明,本文提出的算法能实现实际情况下的数字全息自动聚焦,其再现像的分辨率与装有1倍显微镜头的数码显微镜分辨率相当,足以清晰地分辨出血吸虫尾蚴的尾部分叉特征.利用同轴数字全息技术可在水面与图像传感器之间的距离不确定的情况下实现对血吸虫尾蚴的检测.     

基于多角度无透镜傅里叶变换数字全息的散斑噪声抑制成像研究

在数字全息成像中,散斑噪声严重影响了再现像的信噪比和成像分辨率,因此为了提高数字全息成像质量,迫切需要抑制再现像的散斑噪声.分析并给出了矩形散射光斑的强度协方差,定量计算了特定实验条件下产生退相关散斑图样的最小角度差.结合透镜的性质设计并搭建了多角度无透镜傅里叶变换数字全息成像系统,利用光纤端面在透镜焦平面的二维机械移动代替传统反射镜的旋转,使照明光束在不改变照明位置和大小的同时,可任意改变光束方向.移动光纤端面使多角度照明满足最小角度差,获取了81幅数字全息图.利用单次快速傅里叶逆变换实现数值再现,对多幅再现像的强度像求平均,实验结果表明散斑对比度降低为单幅再现像的14.6%,使图像信噪比提高了6.9倍.该抑制散斑的多角度数字全息成像方法有效的抑制了散斑噪声,且成像光路结构简单,可操作性强.     

基于TPX透镜的连续太赫兹波像面数字全息成像研究

太赫兹波对非极性材料具有良好的穿透性,与太赫兹波强度成像相比,相衬成像能够更好的反映物体的内部结构.本文提出了基于TPX透镜的连续太赫兹波像面数字全息相衬成像方法,研究了全息记录和再现过程,利用曲面拟合畸变校正去除TPX透镜引入的二次相位畸变.实验搭建了太赫兹像面数字全息成像系统,利用振幅型西门子星样品对系统的成像分辨...     

显微数字全息数值再现中的自动聚焦

自动聚焦是显微数字全息数值再现中的一项关键技术。基于菲涅耳变换重建算法, 采用实验验证的方法, 对显微数字全息成像中六种典型聚焦评价函数的性能进行了对比研究。提出了利用再现像部分区域进行调焦判断的方法。结果表明, 这些函数都具有较好的单峰性、一致的调焦范围和准确性, 但与梯度运算相关的调焦函数运算时间太长; 傅里叶频谱函数调焦速度最快, 是首选的聚焦评价函数。选取再现像部分区域作为调焦计算区域, 可大大缩短调焦时间。对于低信噪比全息图, 利用维纳自适应滤波进行预处理及对再现像进行后处理, 有利于提高自动调焦的准确性及再现像的质量。     

利用小尺寸电荷耦合器件实现数字全息高分辨成像

为了在降低数字全息显微成像系统成本的同时实现高分辨成像,对像面数字全息显微术的记录与再现过程进行了理论分析,结合系统的点扩散函数,对该系统的横向分辨率进行了分析. 得到了如下结论：像面数字全息显微系统的横向分辨率对电荷耦合器件（CCD）光敏面尺寸变化不敏感;对于常见的CCD 器件,其像元尺寸的变化对该系统的横向分辨率影响甚微. 此外,对像面数字全息显微系统的成像特点进行了分析,结果表明：利用像面数字全息系统可以实现物体信息的完整记录与再现,其成像分辨率及像质优于预放大数字全息系统. 利用搭建的数字全息实验记录系统,从强度及位相两方面对理论分析结果进行了验证,实验结果表明了理论分析的正确性. 关键词： 像面数字全息术 横向分辨率 点扩散函数 小尺寸电荷耦合器件     

分布式网络信息数据防篡改方法研究

为在足球视频中有效的检测与跟踪运动目标,需要对足球比赛视频中目标检测与跟踪算法进行研究。当前采用的算法,在动态场景中,存在运动目标检测与跟踪效果不佳的问题。为此,提出一种基于OpenCV的足球比赛视频中目标检测与跟踪算法。该算法结合平均背景算法将足球比赛视频中目标图像分割为前景区与背景区,计算足球比赛视频每一帧目标图像和背景图像之间差值的绝对差值,同时计算每一个目标图像中像素点的平均值与标准值来建立目标图像背景统计模型,利用TMHI算法对足球比赛视频中目标初始图像进行阈值分割,得到初始分割图像,对分割图像进行中值滤波和闭运算,再使用卡尔曼滤波对分割后的目标图像进行处理,得到镜头中目标的质心位置和目标外界矩形框,然后对足球比赛视频中目标进行跟踪。实验证明,该算法有效的检测与跟踪足球视频中运动目标。     

全息模拟再现像的三维重构

提出一种全息模拟再现像的三维重构方法,可以模拟再现得到三维再现像.计算机模拟再现许多幅在不同深度位置的二维光强分布;利用灰度级变化的聚焦度评价方法,通过寻找最大聚焦度值,确定再现三维像各像点的深度信息.实验证明,该方法能实现模拟再现像的三维重构,使数字全息术有希望成为一种全新的三维面形检测技术.再现像三维重构的实现可以更客观地对全息图进行像质评价,并验证计算机制全息术算法的正确性.     

基于滤波成像的大视角数字全息技术

为提高数字全息再现像视角,提出一种基于滤波成像的数字全息技术来实现大视角的三维物体面型测量.利用离轴像面数字全息技术,通过在4F相干图像处理系统的空间频谱面处放置可移动的低通滤波器,使满足CCD分辨率的物光波与参考光波干涉形成全息图,并控制低通滤波及成像区域分别记录不同谱段的子全息图.再现时,首先对子全息图进行数字傅里叶变换,重构对应频谱段,并对频谱段进行拼接形成完整的物光频谱|而后通过数字再现获得大视角的数字全息再现像.利用该方法测量了圆柱形表面（光滑的缝纫针）的三维形貌,并取得了较好的实验结果.     

基于滤波成像的大视角数字全息技术

为提高数字全息再现像视角,提出一种基于滤波成像的数字全息技术来实现大视角的三维物体面型测量.利用离轴像面数字全息技术,通过在4F相干图像处理系统的空间频谱面处放置可移动的低通滤波器,使满足CCD分辨率的物光波与参考光波干涉形成全息图,并控制低通滤波及成像区域分别记录不同谱段的子全息图.再现时,首先对子全息图进行数字傅里叶变换,重构对应频谱段,并对频谱段进行拼接形成完整的物光频谱;而后通过数字再现获得大视角的数字全息再现像.利用该方法测量了圆柱形表面(光滑的缝纫针)的三维形貌,并取得了较好的实验结果.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.