Propagation velocity of the reaction front in addition polymerization systems

Traveling polymerization fronts in unstirred solutions of methylmethacrylate, methacrylic acid, or acrylamide with some free radicals initiators (through thermal decomposition) have been observed experimentally. A local heating of the initial reactant mixture, under suitable conditions, leads to a reaction front that propagates along the space coordinate with a constant velocity. In this article, a physical interpretation of this phenomenon is provided through a mathematical model that accounts for the depolimerization reaction and is based on the constant pattern approach. Moreover, an approximate explicit analytic expression for the velocity of propagation of the polymerization front is proposed. The theoretical values are compared with those measured experimentally as a function of the initiator concentration for different addition polymerization systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35:1047–1059, 1997     

Deep eutectic solvents as both active fillers and monomers for frontal polymerization

The deep eutectic solvents (DESs) based on the mixtures of a variety of ammonium salts and hydrogen bond donors containing acrylic acids and acrylamides are capable of sustaining frontal polymerization (FP). The selection of ammonium salt affects the reactivity and allows FP at relatively low temperature but with full conversion. Also, full conversion allows us to use these polymers for biomedical applications (e.g., drug delivery systems) as the unreactive ammonium salts can be released from the resulting polymer without by‐products. We call these components “active fillers,” which can be ammonium salts with biological or pharmaceutical importance. For instance, we prepared poly(acrylic acid) loaded with lidocaine hydrochloride (a common anesthetic), the release of which was found to occur in a controlled fashion. The ammonium salts also create a sufficiently high viscosity to suppress buoyancy‐driven convection without additional materials. The DES here described played an all‐in‐one role, providing the monomer, the active filler, and the polymerization medium for FPs. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

The effect of a trithiol and inorganic fillers on the photo‐induced thermal frontal polymerization of a triacrylate

Thermal frontal polymerization is a process in which a localized reaction propagates through an unstirred system by the coupling of the thermal diffusion and the Arrhenius kinetics of an exothermic polymerization. A trithiol was found to affect the front velocity and the time for inducing a front upon exposure to UV light for trimethylolpropane triacrylate polymerization fronts with either kaolin or calcium carbonate filler present. The addition of trithiol and filler both decreased the front velocity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8091–8096, 2008     

Factors affecting propagating fronts of addition polymerization: Velocity,front curvature,temperatue profile,conversion, and molecular weight distribution

Several properties of propagating fronts of addition polymerization were studied. A power function could be fit to the velocity dependence on initiator concentration, but not with the exponents predicted by current models or in agreement with other published work. Bubbles from the volatile by-products of initiator decomposition were found to affect the front velocity and curvature. The front velocity for triethylene glycol dimethacrylate polymerization was found to depend linearly on temperature over a moderate range. The conversion of methacrylic acid in fronts varied greatly with initiator type and concentration. Benzoyl peroxide produced much lower conversion than t-butyl peroxide, but fronts with tBPO propagated slower. A dual initiator system of BPO and tBPO produced rapidly propagating fronts with good conversion but the contribution of each initiator to the velocity was not additive. The possibility of chain branching was considered. The apparent molecular weight distributions were very broad, often trimodal, and found to depend on initiator type and concentration as well as the tube diameter. The temperature profiles were measured and found to be very sharp for BPO and broader for tBPO but both had front temperatures in excess of 200°C, indicating a high ceiling temperature. © 1995 John Wiley & Sons, Inc.     

Thermal frontal polymerization with a thermally released redox catalyst

We studied thermal frontal polymerization using a redox system in an attempt to lower the temperature of the frontally polymerizable system while increasing the front velocity so as to obtain a self‐sustaining front in a thinner layer than without the redox components. A cobalt‐containing polymer with a melting point of 63 °C (Intelimer 6050X11) and cumene hydroperoxide were used with a triacrylate. The use of the Intelimer decreased the front velocity but allowed fronts to propagate in thinner layers and with more filler while still having a pot life of days. Nonplanar modes of propagation occurred. Fronts propagated faster when 6‐O‐palmitoyl‐L ‐ascorbic acid was used as a reductant. Interestingly, fronts were also faster with the reductant even without the Intelimer if kaolin clay was the filler; however, the pot life was significantly reduced. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

一步法合成大孔丙烯酸交联树脂

悬浮聚合;二乙烯苯;一步法合成大孔丙烯酸交联树脂     

Spherically propagating thermal polymerization fronts

We demonstrate for the first time spherically propagating frontal polymerization that also exhibits spin modes. We have developed an interesting system using the amine‐catalyzed Michael addition of a trithiol to a triacrylate to create a rubbery gel. The gel suppresses convection and bubble formation during front propagation. A peroxide is also present to act as a thermal initiator. The front propagates via free‐radical polymerization of the remaining triacrylate after being initiated photochemically in the center of the reactor. It is possible to prepare the rubbery gel in any shape and then initiate thermal frontal polymerization. So‐called spin modes have been observed for the first time in spherically propagating fronts in which waves of polymerization propagate on the expanding spherical front. A system using a diacrylate dissolved in dimethyl sulfoxide with added silica gel and with persulfate as the initiator supports spherical fronts but does not exhibit spin modes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1387–1395, 2006     

pH对丙烯酸-丁烯醛共聚合反应的影响

具有功能基的聚合物因其所具备的特殊性能而获得越来越多的应用[1] .带醛基的聚合物可在室温下很容易与酶、抗体、抗原、蛋白质、细胞等含氨基的生物高分子反应 ,生成Ｓｃｈｉｆｆ碱 ,将这些生物高分子共价偶联到聚合物上 ,并能保持它们绝大部分的生物活性 ,因而在免疫分析、生物化学、生物医学等领域有着广泛的应用前景[2～ 4 ] .然而 ,到目前为止 ,带醛基的聚合物的合成研究主要集中在丙烯醛的均聚及共聚反应[5～ 8] ,而对其它不饱和醛的聚合研究报道很少 .但是由于丙烯醛聚合物分子链上相邻的醛基极易形成缩醛或半缩醛而使自由醛基的数量…     

Effect of orientation on thermoset frontal polymerization

We observed that the velocities of descending thermoset polymerization fronts were strongly affected by the orientation of the tube. The front remained approximately perpendicular to the gravitational vector but propagated almost 1.8 times as fast at 75° along the axis of the tube. We performed a study of the velocity and front‐shape dependence on orientation with propagating fronts of triethylene glycol dimethacrylate with peroxide initiator and acrylamide/bisacrylamide polymerization in dimethyl sulfoxide with persulfate initiator. The percentage increase of velocity was independent of the initiator concentration but strongly dependent on the viscosity. Convection under the front flowed away from the tube wall nearest the vertical axis and was stronger as the angle increased. The front shape also changed, becoming significantly distorted near the wall from which the convection originated. We applied a simple geometric argument to explain the angular dependence for small angles on the basis of the assumption that convection did not affect the velocity of propagation normal to the front. The increase in velocity along the tube axis could be explained by a projection of the normal velocity onto the tube axis, following a 1/cosθ dependence. For higher angles, the convection was not sufficiently strong to maintain a level front. When the difference from a 180° orientation was considered, the velocity dependence exactly followed the geometric relationship. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3504–3508, 2002     

Photopolymerization kinetics of ionic liquid monomers derived from the neutralization reaction between trialkylamines and acid‐containing (meth)acrylates

Polymerizable ionic liquids were synthesized from the neutralization reaction between trialkylamines (tributylamine, trihexylamine, trioctylamine, 2‐(dimethyl‐amino)ethyl acrylate, and 2‐(dimethylamino)ethyl methacrylate) and acid‐containing (meth)acrylates to study the kinetics of their photopolymerization. The ionic liquids formed from acrylic acid and methacrylic acid with trialkylamines showed low or moderate increases in rate compared to their monofunctional analogues. The ionic liquids formed from (meth)acrylic acid and a tertiary amine with a pendant acrylate exhibited rates typical of traditional di(meth)acrylates, although the (meth)acrylates were not covalently attached to the same molecule. All of the phosphate‐based ionic liquids exhibited very rapid polymerization rates and strong dependence on the initial viscosity. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3009–3021, 2007     

Self-propagating frontal copolymerization

The application of self-propagating frontal polymerization (FP) to synthesize copolymers has been investigated. Frontal copolymerizations of methyl methacrylate and methacrylic acid (MMA–MAA), acrylic acid and methacrylic acid (AA–MAA), and styrene and methacrylic acid (STY–MAA) with benzoyl peroxide (BPO) as initiator have been performed. The measured front velocities have been compared with the results of a suitably developed model. This is based on the pseudokinetic approach, accounts for the depropagation reaction, and is fully predictive; i.e., it does not include any adjustable parameter (although one had to be used for the specific experimental setup used in this work). An explicit, simplified solution of the model has been obtained using the constant pattern approximation. The microstructures of copolymers produced in bulk and by FP have been analyzed by differential scanning calorimetry. Their comparison indicates that self-propagating frontal copolymerization provides a substantial improvement in the uniformity of the chain composition distribution. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1117–1126, 1998     

Synthesis of Latex Particles with Surface Functional Groups and Their Applications for the Fabrication of Porous Materials

In this study, monodisperse latex particles with specific surface functional groups were synthesized by emulsifier-free emulsion polymerization. Amidine or carboxylated polystyrene nanospheres with narrow size distribution were prepared by emulsion polymerization using AIBA (α,α′-zodiisobutyramidine dihydrochloride) as amine-containing initiator or acrylic acid as carboxyl-containing comonomer, respectively. Factors affecting the particle size and distribution were systemically studied by changing the amount of initiator or monomer, the polymerization temperature, and the stirring speed of emulsion polymerization reactor. Monodisperse polymethylmethacrylate beads were also synthesized by soapless emulsion polymerization using methacrylic acid or aminoethylmethacrylate hydrogen hydrochloride as comonomer for the surface functionalization of the particles. As applications of the latex beads, the polymeric particles were adopted as templating materials for the fabrication of macroporous titania film and meso-macroporous silica particles by colloidal templating method.     

FTIR study of hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide,and acetonitrile in supercritical CO_2

FTIR spectroscopy was used to study the hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide (DMSO),and acetonitrile in supercritical CO_2 at 318.15 K, and 12.5 and 16.5 MPa. The concentrations of the cosolvents range from 0—0.6 mol·L~(-1). The area percentage of absorption bands for hydrogen-bonded and nonhydrogen-bonded species was obtained from the IR spectra. The acid and the cosolvents can form hydrogen bond even when their concentrations are very low. At fixed solute concentration, the extent of hydrogenbonding increases with cosolvent concentration. At higher ethanol concentrations, it seems that one stearic acid molecule can hydrogen bond with more than one ethanol molecules simultaneously. It is seen that the strength of the hydrogen bond formed by the acid and the cosolvents is in the order: DMSO>ethanol>acetonitrile.     

Novel temperature‐responsive water‐soluble copolymers based on 2‐hydroxyethylacrylate and vinyl butyl ether and their interactions with poly(carboxylic acids)

Novel water‐soluble amphiphilic copolymers have been synthesized by free radical copolymerization of 2‐hydroxyethylacrylate with vinyl butyl ether. In water these copolymers exhibit lower critical solution temperature, which depends on the content of hydrophobic vinyl butyl ether units. The interaction between these copolymers and poly(acrylic acid) or poly(methacrylic acid) in aqueous solutions results in formation of interpolymer complexes stabilized by hydrogen bonds and hydrophobic interactions. An increase in hydrophobicity of the copolymers leads to the enhancement of their complex formation ability with respect to poly(acrylic acid) and poly(methacrylic acid). Poly(methacrylic acid) forms stronger complexes with the copolymers when compared with poly(acrylic acid). The complexes exhibit dual sensitivity to pH‐ and temperature and this property may be easily adjusted regulating the strength of interaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 195–204, 2006     

Frontal free‐radical copolymerization of urethane–acrylates

We report the first synthesis of urethane–acrylate copolymers via free‐radical frontal polymerization. In a typical run, the appropriate amounts of the reactants (urethane–acrylate macromonomer and 2‐hydroxyethyl acrylate) and initiator (ammonium persulfate) were dissolved in dimethyl sulfoxide. Frontal polymerization was initiated by the heating of the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self‐propagate throughout the reaction vessel. Once it was initiated, no further energy was required for the polymerization to occur. The dependence of the front velocity and front temperature on the initiator concentration was investigated. The front temperatures were between 55 and 65 °C, depending on the persulfate concentration. Thermogravimetric analysis indicated that the urethane–acrylate copolymers had higher thermal stability than pure frontally prepared polyurethane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3018–3024, 2006     

The effect of acrylate functionality on frontal polymerization velocity and temperature

Frontal polymerization is a method of converting monomer(s) to polymer via a localized reaction zone that propagates from the coupling of thermal diffusion with the Arrhenius kinetics of an exothermic reaction. Several factors affect front velocity and temperature with the role of monomer functionality being of particular interest in this study. Polymerizing a di and triacrylate of equal molecular weight per acrylate revealed that as the proportion of triacrylate was increased the velocity and temperature increased. This is attributed to increased crosslinking and autoacceleration. Comparing several different acrylate monomers, both neat and diluted with dimethyl sulfoxide (DMSO) so as to maintain constant acrylate group concentration, shows that velocity increases with increased functionality from mono to difunctional monomers. This trend breaks when applied to tri‐ and tetraacrylates, with fronts containing trifunctional monomer being the fastest. Acrylates containing hydroxyl functionality, as in the case of pentaerythritol‐based triacrylates, are slower than acrylates without. This is attributed to a chain‐transfer event and was tested using octanol and a hydroxyl‐free acrylate. It has also been shown that small amounts of water cause a lowering of front velocity due to energy lost via vaporization, which lowers the front temperature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 982–988     

Photopolymerization kinetics of tributylmethylammonium‐based (meth)acrylate ionic liquids and the effect of water

Polymerizable ionic liquids were synthesized from the neutralization reaction between tributylmethylammonium hydroxide and methacrylic or acrylic acid, and their photopolymerization kinetics have been determined. The acrylate monomer polymerization rate exhibited a profound dependence on the water content as follows: the monomer viscosity was a strong function of the water content, increasing substantially as the water content increased from less than 5 to 30%. For the tributylmethylammonium acrylate with less than 5% water, the viscosity was 2000 times greater than that of butyl acrylate. The high viscosity is proposed to reduce both the propagation and termination steps. Both monomers exhibited an increase in rate with temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3766–3773, 2008     

Synthesis of functional polymer particles by dispersion polymerization in organic media: A tool toward stable electrophoretic inks

In this article, a simple route to obtain particles in one step from functional ionizable monomers in organic media by the use of acrylate‐based macroinitiator synthesized by nitroxide‐mediated radical polymerization is presented. Different positively ionizable monomers like 4‐vinylpyridine, (dimethylamino)ethyl methacrylate, or negatively ionizable ones like methacrylic acid and acrylic acid were tested. Several parameters were studied to control the particles size, their stability in different organic media, and the possibility to crosslink them. Finally, well‐defined, depending of conditions, functional latexes in organic media were produced in a simple way. This synthetic process constitutes the first step to produce electrophoretic inks for display applications such as electronic paper. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4608–4617     

Effects of thiols,lithium chloride,and ethoxylated monomers on the frontal polymerization of a triacrylate

Thermal frontal polymerization is a process in which a localized reaction propagates through an unstirred system by the coupling of the thermal diffusion and the Arrhenius kinetics of an exothermic polymerization. With multifunctional acrylates, such as trimethylolpropane triacrylate (TMPTA‐n), front temperatures can reach 250 °C, resulting in smoke from unreacted peroxide. Addition of a thiol lowers the front temperature and the front velocity due the copolymerization between the thiol and the acrylate, with some formulations not sufficiently reactive to sustain frontal polymerization. The effects of molecular weight per thiol and functionality of thiol on front temperature and velocity were studied in the frontal copolymerization of TMPTA‐n/trimethylolpropane ethoxylate triacrylate and different thiols. We also investigated the front temperature and velocity for a system containing triacrylate and dodecyl acrylate. Finally, the effects of lithium chloride in the presence of thiol on the front velocity and front temperature were studied. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

First solvent‐free synthesis of poly(N‐methylolacrylamide) via frontal free‐radical polymerization

We report the first synthesis of poly (N‐methylolacrylamide) (PNMA) via free‐radical frontal polymerization (FP) with solid monomers at ambient pressure. The appropriate amounts of reactants (N‐methylolacrylamide) (NMA) and initiator (ammonium persulfate) were mixed together at ambient temperature without solvent. FP was initiated by heating the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self‐propagate throughout the reaction vessel. Once initiated, no further energy was required for polymerization to occur. To suppress the fingers of molten monomer, a small amount of nanosilica was added. We also produced PNMA with dimethyl sulfoxide (DMSO) or N‐methyl‐2‐pyrrolidone, as solvent by FP, to study the macrokinetics in FP of PNMA without fillers. The front velocity and front temperature dependence on the ammonium persulfate and N‐methyl‐2‐pyrrolidone concentration were investigated. The polymer was analyzed by thermogravimetric analysis. Results show that without postpolymerization solvent removal, waste production can be reduced. Solvent‐free FP could be exploited as a means for preparation of PNMA with the potential advantage of higher throughput than solvent‐based methods. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4322–4330, 2007