Synthesis and characterization of half-sandwich iridium complexes containing 2,6(7)-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene and ancillary ortho-carborane-1,2-dichalcogenolato ligands

The binuclear half-sandwich iridium complexes {Cp^∗IrCl₂}₂(μ-2,6(7)-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene) (3) and {Cp^∗Ir[E₂C₂(B₁₀H₁₀)]}₂(μ-2,6(7)-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene) (E = S(5a), Se(5b)) were prepared from the reaction of [Cp^∗IrCl(μ-Cl)]₂ or the “pseudo-aromatic” half-sandwich iridium complex Cp^∗Ir[E₂C₂(B₁₀H₁₀)] (E = S(4a), Se(4b)) with a tetrathiafulvalene (TTF) derivative 2,6-bis(4-pyridyl)-1,4,5,8-tetrathiafulvalene (2) at room temperature. The complexes (3, 5a and 5b) have been fully characterized by IR and NMR spectroscopy, as well as elemental analysis. And the molecular structures of 2 and 5a were established through X-ray crystallography. It is interesting that infinite tunnels are created by repeating ‘buckled bowl’ molecules of 5a.     

Synthesis, characterization, and catalytic activities in syndiospecific polymerization of styrene for half-sandwich titanium complexes with non-Cp tridentate dianionic ligands MeN(CH2CR2O)2

New half-titanocenes, Cp^∗TiCl[(OCR₂CH₂)NMe(CH₂CR^′₂O)] [R,R′ = H (1), R,R′ = Me, H, (2), R,R′ = Me (3)], were prepared from Cp^∗TiCl₃ (4) with the corresponding alcohols in the presence of triethylamine. X-ray analysis shows that 1 has slightly distorted trigonal bipyramidal geometry around Ti. These complexes exhibited moderate catalytic activities for syndiospecific styrene polymerization in the presence of MAO and the activity increased in the order: 2 > 1 > 4 > 3 (at 50 °C), 1 > 2 > 4 > 3 (at 70 °C and 90 °C).     

Straightforward synthesis of phosphametallocenium cations of Rh and Ir

Reaction of 3,4-dimethylphospholylthallium (Tl-1) with [Cp^∗MCl₂]₂ (M = Rh, Ir) leads to the formation of the dimeric species [(Cp^∗M)₂(Me₂C₄H₂P)₃]⁺2 and 3 with bridging μ-η¹:η¹-phospholyl ligands. The phosphametallocenium sandwich complexes [Cp^∗M(Me₂C₄(SiMe₃)₂P)]⁺7 (M = Rh) and 8 (M = Ir) could be obtained from the reaction of [Cp^∗MCl₂]₂ and the 2,5-bis(trimethylsilyl)-1-trimethylstannylphosphole 6, with the bulky trimethylsilyl groups preventing the phosphole from η¹- and enforcing a η⁵-coordination. The structures of phospharhodocenium cation 7 and a byproduct 9 containing a phosphairidocenium moiety could be determined by X-ray diffraction.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Synthesis of sulfido- and thiolato-bridged Ir3 cluster and its reactions with alkyne and isocyanide including highly regioselective cyclotrimerization of methyl propiolate

Reactions of a sulfido- and thiolato-bridged diiridium complex [(Cp^∗Ir)₂(μ-S)(μ-SCH₂CH₂CN)₂] (Cp^∗ = η⁵-C₅Me₅) with [(Cp^∗MCl)₂(μ-Cl)₂] (M = Ir, Rh) afforded the sulfido- and thiolato-bridged trinuclear clusters [(Cp^∗M)(Cp^∗Ir)₂(μ₃-S)(μ₂-SCH₂CH₂CN)₂(μ₂-Cl)]Cl (4: M = Ir, 5: M = Rh). Upon treatment with XyNC (Xy = 2,6-Me₂C₆H₃) in the presence of KPF₆ at 60 °C, 4 was converted into a mixture of a mononuclear XyNC complex [Cp^∗Ir(SCH₂CH₂CN)(CNXy)₂][PF₆] (6) and a dinuclear XyNC complex [{Cp^∗Ir(CNXy)}₂(μ-S)(μ-SCH₂CH₂CN)][PF₆] (7). On the other hand, reactions of 4 and 5 with methyl propiolate in the presence of KPF₆ at 60 °C resulted in the formation of a cyclic trimer of the alkyne 1,3,5-C₆H₃(COOMe)₃ as the sole detectable organic product. The reactions proceeded catalytically with retention of the cluster cores of 4 and 5, whereby the activity of the former was much higher than that of the latter.     

Reactions of half-sandwich rhodium(III) and iridium(III) compounds with pyridinethiolate ligands: Mono-, di-, and tri-nuclear complexes

Neutral trinuclear metallomacrocycles, [Cp^*RhCl(μ-4-PyS)]₃ (3) and [Cp^*IrCl(μ-4-PyS)]₃ (4) [Cp^* = pentamethylcyclopentadienyl, 4-PyS = 4-pyridinethiolate], have been synthesized by self-assembly reactions of [Cp^*RhCl₂]₂ (1) and [Cp^*IrCl₂]₂ (2) with lithium 4-pyridinethiolate, respectively. In situ reaction of complex 3 with three equivalent of lithium 4-pyridinethiolate resulted in [Cp^*Rh(μ-4-PyS)(4-PyS)]₃ (5) containing both skeleton and pendent 4-PyS groups. Chelating coordination of 2-pyridinethiolate broke down the triangular skeleton to give mononuclear metalloligands Cp^*Rh(2-PyS)(4-PyS) (6) and Cp^*Ir(2-PyS)(4-PyS) (7) [2-PyS = 2-pyridinethiolate], which could also be synthesized from Cp^*RhCl(2-PyS) (10) and Cp^*IrCl(2-PyS) (11) with lithium 4-pyridinethiolate. The coordination reactions of 6 with complexes 1 and 2 gave dinuclear complexes [Cp^*Rh(2-PyS)(μ-4-PyS)][Cp^*RhCl₂] (8) and [Cp^*Rh(2-PyS)(μ-4-PyS)][Cp^*IrCl₂] (9), respectively. Molecular structures of 3, 4, 6 and 11 were determined by X-ray crystallographic analysis. All the complexes have been well characterized by elemental analysis, NMR and IR spectra.     

Half-sandwich rhodium complexes containing both N-heterocyclic carbene and ortho-carborane-1,2-dithiolate ligands

A new route was used to synthesize half-sandwich rhodium complexes containing both N-heterocyclic carbenes (NHC) and carborane ligands. The rhodium carbene complexes Cp^∗Rh(L)[S₂C₂(B₁₀H₁₀)] (Cp^∗ = pentamethylcyclopentadienyl, L = 1,3-dimethylimidazolin-2-ylidene; 4) can be obtained from the reaction of Cp^∗Rh(L)Cl₂ (2) with Li₂S₂C₂(B₁₀H₁₀) or from the reaction of Cp^∗Rh[S₂C₂(B₁₀H₁₀)] (3) with silver-NHC complex prepared by direct reaction of an imidazolium precursor and Ag₂O. Complexes 2 and 4 were characterized by IR, NMR spectroscopy, element analysis and X-ray structure analyses.     

Formation of niobium and tantalum ylide complexes

The reactions of tri(bis(ethyl)amino)phosphorus ylide (Et₂N)₃PCH₂ with cyclopentadienyl (Cp) metal (V) tetrachloride CpMCl₄ (M = Nb 1; Ta 3) and pentamethylcycopentadienyl (Cp^∗) metal (V) tetrachloride Cp^∗MCl₄ (M = Nb 2; Ta 4) were investigated. The hexa-coordinate ylide adducts complexes 5 (CpNbCl₄(H₂CP(NEt₂)₃)), 6 (Cp^∗NbCl₄(H₂CP(NEt₂)₃)) and 8 (Cp^∗TaCl₄(H₂CP(NEt₂)₃)) with pseudo-octahedral geometry were structurally analyzed with X-ray diffraction. Compound 4 (Cp^∗TaCl₄) reacted with three molar equivalent of phosphorus ylide to form one ionic complex 9 ([H₃C-P(NEt₂)₃][Cp^∗TaCl₅]) which was also structurally analyzed with X-ray diffraction. The possible formation mechanism of compound 9 has been discussed.     

Formations and electrochemical behavior of mononuclear and binuclear molybdenum dithiolene complexes with nitrosyl ligands: Evidence for the formation of a coordinatively unsaturated species [CpMo(NO)(dithiolene)]

The one-pot reaction of [Cp^∗Mo(NO)(CO)₂] with elemental sulfur and dimethyl acetylenedicarboxylate (C₂Z₂ (Z = COOMe)) gave the [2+2] cycloadduct of the mononuclear molybdenum dithiolene complex [Cp^∗Mo(NO)(S₂C₂Z₂)(C₂Z₂)] (1), and some binuclear complexes:[Cp^∗Mo(NO)(S₂C₂Z₂)]₂ (2), [Cp^∗₂Mo₂(NO)₂S₂(S₂C₂Z₂)] (3) and [Cp^∗Mo(NO)S₂]₂ (4).The reaction of [Cp^∗Mo(NO)(Cl)(μ-Cl)]₂ with OC{S₂C₂(COOMe)₂} in the presence of sodium methoxide also produced complex 2 and the paramagnetic Cp^∗Mo bisdithiolene complex [Cp^∗Mo(S₂C₂Z₂)₂] (5, Z = COOMe).The structures of complexes 1-5 were determined by X-ray crystal structure analysis.The nitrosyl ligands of complexes 1-4 showed a linear coordination to the molybdenum center (the Mo-N-O bond angles = 169-174°), and their N-O bond lengths were 1.17-1.20 Å.In the binuclear complexes 2-4, two nitrosyl ligands were placed at cis-position.Complexes 1 and 2 were characterized by cyclic voltammetry and spectroelectrochemistry (visible and IR). The electrochemical reduction of the dimeric complex 2 formed the monomeric dithiolene complex[Cp^∗Mo(NO)(S₂C₂Z₂)]⁻ (X⁻) whose lifetime was several minutes. When the anion X⁻ was electrochemically oxidized, the coordinatively unsaturated species X was generated, but it was immediately dimerized to afford the original dimeric complex 2. The reduction of the complex 1 included the elimination of the bridged DMAD moiety (C₂Z₂) to give the anion X⁻.     

Stepwise formation of metallo-prisms of iridium and rhodium complexes bearing pentamethylcyclopentadienyl ligands

Reactions of [M(Cp^∗)Cl(μ-Cl)]₂ (M = Ir(1a); M = Rh(1b)) with tridentate ligands tpt (tpt = 2,4,6-tripyridyl-1,3,5-triazine) gave the corresponding trinuclear complexes [M₃(Cp^∗)₃(μ₃-4-tpt-κN)Cl₆] (M = Ir(2a); M = Rh(2b)), which can be converted into hexanuclear complexes [M₆(Cp^∗)₆(μ₃-4-tpt-κN)₂(μ-Cl)₆](O₃SCF₃)₆ (M = Ir(3a); M = Rh(3b)) by treatment with AgO₃SCF₃, respectively. X-ray of 3b revealed that each of six pentamethylcyclopentadienyl metal moieties was connected by two μ-Cl-bridged atoms and a tridentate ligand to construct a cation triangular metallo-prism cavity with the volume of about 273 Å³ based on the distance of the two triazine moieties is 3.62 Å.     

Synthesis and reactivity of rhodium(III) pentamethylcyclopentadienyl complexes of N-B-PTA(BH3): X-ray crystal structures of [CpRhCl2{N-B}-PTA(BH3)] and [CpRh{N-B-PTA(BH3)}(η-CH2 = CHPh)]

The reaction between 1-boranyl-1,3,5-triaza-7-phosphaadamantane ligand N-B-PTA(BH₃) and [Cp^∗RhCl(μ-Cl)]₂ affords [Cp^∗Rh{N-B-PTA(BH₃)}Cl₂] (3) or [Cp_∗Rh{N-B-PTA(BH₃)}₂Cl]Cl (5) containing one or two P-bonded boronated PTA ligands. The hydride [Cp_∗Rh{N-B-PTA(BH₃)}H₂] (8) was also obtained by reaction of 3 with NaBH₄ and alternatively by direct hydroboration of [Cp^∗Rh(PTA)Cl₂] with excess NaBH₄. Moderately slow hydrolysis of the N-boranyl rhodium complexes affords dihydrogen, H₃BO₃ and the corresponding PTA derivatives, including the water-soluble dihydride [Cp^∗Rh(PTA)H₂] (9). Finally, the reaction of 8 with electron poor alkynes gives the alkene complexes [Cp^∗Rh{N-B-PTA(BH₃)}(η²-CH₂ = CHR)] (R = Ph, 10; C(O)OEt, 11) as a mixture of rotamers η²-coordinated to rhodium without affecting the N-BH₃ moiety. The X-ray crystal structures of 3 and 10 were also obtained and are here discussed.     

Organometallic dithiolene complexes of benzenedithiolate analogues with π-coordinating and π-interacting Cp* ligand

Organometallic dithiolene complexes, which were formulated as [Cp*M(dcbdt)] and [Cp*M(dcdmp)] (M = Co, Rh, Ir; Cp* = η⁵-pentamethylcyclopentadienyl, dcbdt = 4,5-dicyanobenzene-1,2-dithiolate, dcdmp = 2,3-dicyano-5,6-dimercaptopyrazine) were prepared from a low valent Cp*Co^I or high valent Cp*M^III species (M^III = Co^III, Rh^III, Ir^III). The UV-Vis absorption spectral and electrochemical data of them were obtained. The lowest absorption (HOMO-LUMO) energies of them became redshift in order of the Co > Rh > Ir complexes. The reduction potentials suggested that the central metal modifies their LUMO levels. The molecular and crystal structures of [Cp*Co(dcbdt)] (3a), [Cp*Co(dcdmp)] (4a) and [Cp*Rh(dcdmp)] (4b) were determined by X-ray diffraction studies. The cobalt complexes 3a and 4a were monomeric, formally 16-electron complexes and have two-legged piano-stool geometries. The crystal structure of 3a indicated some plane-to-plane intermolecular interactions such as benzene?benzene interaction on the dcbdt ligand and two Cp*?benzene π-π stackings. 4a showed plane-to-plane interaction with a pseudo-4-fold-symmetry arrangement between the pyrazine moieties on the dcdmp ligand. The rhodium complex 4b was dimeric in the crystal to form a criss-cross arrangement and had a three-legged piano-stool geometry, but it was monomerized in solution. The dimer of 3b was observed in the oxidation process of the cyclic voltammogram.     

Insertion of nitrene and chalcogenolate groups into the Ir-C σ bond in a cyclometalated iridium(III) complex

Treatment of [Cp∗Ir(ppy)Cl] (Cp∗ = η⁵-C₅Me₅, ppyH = 2-(2-pyridyl)phenyl) with Ag(OTf) (OTf⁻ = triflate) in MeOH and MeCN gave the solvento complexes [Cp∗Ir(ppy)(solv)][OTf] (solv = MeOH (1) and MeCN (2)). Complex 1 is capable of catalyzing oxidation and azirdination of styrene with PhIO and PhINTs (Ts = tosyl), respectively. Treatment of 2 with a stoichiometric amount of PhINTs resulted in the insertion of the NTs group into the Ir-C(ppy) bond and formation of [Cp∗Ir(η²-ppy-NTs)(MeCN)][OTf] (3). Treatment of 1 with R₂E₂ afforded [Cp∗Ir(ppy)(η¹-R₂E₂)][OTf] (E = S (4), Se (5), Te (6)). Reactions of 4 and 5 with Ag(OTf) resulted in cleavage of the E-E bond and insertion of an ER group into the Ir-C(ppy) bond. The crystal structures of complexes 2-6 and [Cp∗Ir(η²-ppy-S-p-tol)(H₂O)][OTf]₂ have been determined.     

Synthesis and characterization of binuclear μ-oxo and μ-telluro molybdenum(V) complexes, [CpMo(O)(μ-Te)]2

Pyrolysis of an in-situ generated intermediate, produced in the reaction of [Cp^∗MoCl₄], 1, (Cp^∗ = η⁵-C₅Me₅) with [LiBH₄·THF], with an excess of difuryl ditelluride in toluene at 90 °C yielded syn and anti isomers of [Cp^∗Mo(O)(μ-Te)]₂ (2, 3) and [Cp^∗₂Mo₂O₂(μ-O)(μ-Te)] (4, 5). In a similar fashion, dibenzyl diselenide yielded syn and anti isomers of [Cp^∗Mo(O)(μ-Se)]₂ (6, 7), along with the known nido-[(Cp^∗Mo)₂B₄H₈Se₂]. Note that in parallel with 2-7, [(Cp^∗Mo)₂B₅H₉] was isolated as the major product in both cases. Compounds 2-7 have been isolated in modest yield as orange to brown crystalline solids. All the new compounds have been characterized in solution by mass, IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy, and the structural types were unequivocally established by crystallographic analysis of 2-4 and 7.     

Synthesis and characterization of heterometallic Rh/Ru complexes supported by 1,2-dichalcogenolato-o-carborane ligands

The 16-electron half-sandwich complexes Cp^∗Rh[E₂C₂(B₁₀H₁₀)] (E = S, 1a; Se, 1b) react with [Ru(COD)Cl₂]_x under different conditions to give different types of heterometallic complexes. When the reactions were carried out in THF for 24 h, the binuclear Rh/Ru complexes [Cp^∗Rh(μ-Cl)₂(COD)Ru][E₂C₂(B₁₀H₁₀)] (E = S, 2a; Se, 2b) bridged by two Cl atoms and the binuclear Rh/Rh complexes (Cp^∗Rh)₂[E₂C₂(B₁₀H₁₀)] (E = S, 3a; Se, 3b) with direct Rh-Rh bond can be isolated in moderate yields. [Ru(COD)Cl₂] fragments in 2a and 2b have inserted into the Rh-E bond. If the [Ru(COD)Cl₂]_x was reacted with 1a in the presence of K₂CO₃ in methanol solution, the product [Cp^∗Rh(COD)]Ru[S₂C₂(B₁₀H₁₀]] (4a), K[(μ-Cl)(μ-OCH₃)Ru(COD)]₄ (5a) and 3a were obtained. The B(3)-H activation in complex 4a was found. However, when the reaction between 1b and [Ru(COD)Cl₂]_x was carried out in excessive NaHCO₃, the carborane cage opened products {Cp^∗Rh[S₂C₂(B₉H₁₀)]}Ru(COD) (6b), {Cp^∗Rh[S₂C₂(B₉H₉)]}Ru(COD)(OCH₃) (7b) and 3b were obtained. All complexes were fully characterized by their IR, ¹H NMR and elemental analyses. The molecular structures of 2a, 2b, 3b, 4a, 5a, and 7b have been determined by X-ray crystallography.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Synthesis, characterization and reactivity of tetramethylphospholyl complexes of scandium

Reaction of 2 equiv. of (C₄Me₄P)Li(tmeda) (tmeda = tetraethylenediamine) with 1 equiv. of ScCl₃(THF)₃ gave the new compound (η⁵-C₄Me₄P)₂ScCl₂Li(tmeda) (1), which was characterized by X-ray crystallography. A phospholyl moiety in 1 is labile, as demonstrated by reactions of 1 with LiCH(SiMe₃)₂ and Cp^∗Li (Cp^∗ = C₅Me₅) to afford, respectively, (η⁵-Me₄C₄P)Sc[CH(SiMe₃)₂]Cl₂Li(tmeda) (4) and (η⁵-Me₄C₄P)Cp^∗ScCl₂Li(tmeda) (5). Attempts to generate alkyl derivatives of the general type (η⁵-C₄Me₄P)₂ScR (R = alkyl) were unsuccessful.     

The first metallacarborane triple-decker complexes with a bridging borole ligand

The (borole)iodide complex [(η⁵-C₄H₄BPh)RhI]₄ reacts with the carborane anion [Carb′]⁻ (Carb′ = 9-SMe₂-7,8-C₂B₉H₁₀) giving (Carb′)Rh(η⁵-C₄H₄BPh) (2). Reactions of 2 with dicationic fragments [LM]²⁺ afford the μ-borole triple-decker complexes [(Carb′)Rh(μ-η⁵:η⁵-C₄H₄BPh)ML]²⁺ [LM = Cp^∗Ir (4), (Carb′)Rh (7)] or the arene-type complexes [(Carb′)Rh(μ-η⁵:η⁶-C₄H₄BPh)ML]²⁺ [LM = Cp^∗Rh (3), (Carb′)Ir (8)]. The structure of 4(BF₄)₂ was determined by X-ray diffraction.     

Hydrogenation of cyclohexene catalyzed by ruthenium nitrosyl complexes: Crystal structures of catalyst precursors [CpRu(μ2-NO)2RuCp] and [CpRu(NO)(η-C6H10)] (Cp = η-C5(CH3)5)

Hydrogenation of cyclohexene with 0.1 mol% of the (nitrosyl)ruthenium catalyst [Cp^∗Ru(NO)(C₆H₅)₂] (1; Cp^∗ = η⁵-C₅(CH₃)₅) under 1.0 MPa of H₂ in water at 90 °C for 13 h afforded cyclohexane in 94% yield. The nitrosyl-bridged dinuclear complex [Cp^∗Ru(μ₂-NO)₂RuCp^∗] (2) and the mononuclear cyclohexene complex [Cp^∗Ru(NO)(η²-C₆H₁₀)] (3), which also serve as catalyst precursors, have been obtained from the reaction mixture. X-ray crystallographic analyses of 2 and 3 have revealed that the bridging nitrosyl ligands in 2 form an almost planar Ru₂N₂ four-membered ring with the Ru–Ru distance of 2.5366(5) Å, whereas the nitrosyl ligand in 3 is linear. On the other hand, a ruthenium complex without a nitrosyl ligand [Cp^∗Ru(CH₃CN)₃][OSO₂CF₃] proved to be less effective for this hydrogenation.     

Alkyne-functionalized metallocene complexes: Synthesis, structure, and catalytic ethylene polymerization

Reactions of phenylethynyl lithium with substituted cyclopentenones gave the corresponding pendant phenylethynyl substituted cyclopentadienes. Subsequent deprotonation and transmetallation with TiCl₄·2THF, ZrCl₄, and Cp^∗ZrCl₃ yielded the alkyne-functionalized metallocene complexes [C₅Me₄(CCPh)]₂MCl₂ [M = Ti (1), Zr (2)], Cp^∗[C₅Me₄(CCPh)]ZrCl₂ (3), and Cp^∗[C₅H₂R′₂(CCPh)]ZrCl₂ [R′ = Me (4), Ph (5)]. These complexes were fully characterized by ¹H NMR, ¹³C NMR, MS spectra, and elemental analysis. The molecular structure of 2 was determined by single crystal X-ray diffraction analysis. Ethylene polymerization was studied with these complexes in the presence of methylaluminoxane (MAO).