Synthesis of Novel Eu(III) Luminescent Probe Based on 9- Acridinecarboxylic Acid Skelton for Sensing of ds-DNA

Eu(III)-9-acridinecarboxylate (9-ACA) complex was synthesized and characterized by elemental analysis, conductivity measurement, IR spectroscopy, thermal analysis, mass spectroscopy, ¹H-NMR, fluorescence and ultraviolet spectra. The results indicated that the composition of this complex is [Eu(III)-(9-ACA)₂(NCS)(C₂H₅OH)₂] 2.5 H₂O and the oxygen of the carbonyl group coordinated to Eu(III). The interaction between the complex with nucleotides guanosine 5′- monophosphate (5′-GMP), adenosine 5′-diphosphates (5′-ADP), inosine (5′-IMP) and CT-DNA was studied by fluorescence spectroscopy. The fluorescence intensity of Eu(III)-9-acridinecarboxylate complex was enhanced with the addition of CT-DNA. The effect of pH values on the fluorescence intensity of Eu(III) complex was investigated. Under experimental conditions, the linear range was 9–50 ng mL⁻¹ for calf thymus DNA (CT- DNA) and the corresponding detection limit was 5 ng mL⁻¹. The results showed that Eu(III)-(9-ACA)₂ complex binds to CT-DNA with stability constant of 2.41 × 10⁴ M .     

Highly Selective and Anions Controlled Fluorescent Sensor for Hg<Superscript>2+</Superscript> in Aqueous Environment

A highly selective PET fluorescent sensor B1 for Hg²⁺ containing a BODIPY fluorophore and a NS₂O₂ penta-chelating receptor has been synthesized and characterized. Its absorption maximum wavelength (498 nm) and emission maximum wavelength (512 nm) are both in the visible range. The fluorescence quantum yields of the B1 and Hg²⁺-bound states of BHg1 are 0.008 and 0.58 in 70% aqueous ethanol solution, respectively. The pKa of 1.97 is the lowest in metal ions PET chemo sensors reported up till now as we know. Thus, B1 can detect the Hg²⁺ in a wide pH span, which indicates that it has more potential and further practical applications for biology and toxicology. Furthermore, BHg1 also displays response to some anions such as Cl⁻(Br⁻), , SCN⁻ and CH₃COO⁻, which is attributed to the significant coordinating ability of these anions to Hg²⁺.     

Spectrofluorimetric Assessment of Doxycycline Hydrochloride in Pharmaceutical Tablets and Serum Sample Based on the Enhancement of the Luminescence Intensity of the Optical Sensor Sm<Superscript>3+</Superscript> Ion

A simple and sensitive spectrofluorimetric method for determination of trace amount of doxycycline hydrochloride (DC) in pharmaceutical tablets and serum samples was developed. In ammonia buffer solution of pH 8.9 the doxycycline hydrochloride can remarkably enhance the luminescence intensity of the Sm³⁺ ion in Sm³⁺- DC complex at λ_ex = 400 nm. The produced luminescence intensity of Sm³⁺- DC complex in DMSO is in proportion to the concentration of DC and used as optical sensor for its determination. The dynamic range for the determination of DC is 1 × 10⁻⁸ – 5 × 10⁻⁶ mol L⁻¹ and in case of quantum yield calculations is 7 × 10⁻⁹ – 5 × 10⁻⁶ mol L⁻¹ with detection limit of 6.5 × 10⁻¹⁰ mol L⁻¹. The enhancement mechanism of the luminescence intensity in the Sm³⁺- DC system has been also discussed. A comparison with other spectrofluorimetric methods for tetracycline derivatives in which Eu³⁺ ion is used instead of Sm³⁺ ion is also studied.     

Characterization and photoluminescence studies of Eu<Superscript>2+</Superscript>-doped BaSO<Subscript>4</Subscript> phosphor prepared by the recrystallization method

Eu doped BaSO₄ was prepared by the recrystallization method and characterization of the material was done by using X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR) techniques. From the XRD pattern of Eu doped BaSO₄ compound, it was found that the prominent phase formed was BaSO₄ and traces of other phases were very weak and the result of FTIR spectrum of BaSO₄:Eu shows that the sulfur-oxygen stretch was found at around 1100 cm⁻¹. The room-temperature PL spectra of the Eu doped BaSO₄ sample showed one peak centered at 374 nm, which is the characteristic emission of Eu²⁺ ion. This emission band at 374 nm corresponds to the 4f⁶ 5d→4f⁷ (⁸S_7/2) transitions of Eu²⁺ ions. The excitation spectrum taken at the wavelength 374 nm extends over a wide range of wavelengths from 220–350 nm with a strong peak at around 260 nm. Furthermore, the present sample shows good crystal quality and high photoluminescence sensitivity. Hence our results suggest possible potential applications of Eu doped BaSO₄ phosphor in optoelectronic devices.     

A Highly Sensitive and Selective Fluorescent Chemodosimeter for Hg<Superscript>2+</Superscript> in Neutral Aqueous Solution

A fluorescent assay of Hg²⁺ in neutral aqueous solution was developed using N-[p-(dimethylamino)benzamido]-N′-phenylthiourea (1). 1’s fluorogenic chemodosimetric behaviors towards various metal ions were studied and a high sensitivity as well as selectivity was achieved for Hg²⁺. It was because of a strongly fluorescent 1,3,4-oxadiazoles which was produced by the Hg²⁺ promoted desulfurization reaction. The spectra of ESI mass and IR provided evidences for this reaction. According to fluorescence titration, a good linear relationship ranging from 1.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol l⁻¹ was obtained with the limit of detection as 3.1 × 10⁻⁸ mol l⁻¹. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Europium-sensitized Chemiluminescence of System Tetracycline–H<Subscript>2</Subscript>O<Subscript>2</Subscript>–Fe(II)/(III) and Its Application to the Determination of Tetracycline

Chemiluminescence (CL) of the reaction system tetracycline–H₂O₂–Fe(II)/(III)–Eu(III) was used for the determination of tetracycline hydrochloride in water, pharmaceutical preparations, and honey. The CL spectrum registered for this system shows emission bands typical of Eu(III) ions, with a maximum at λ ∼ 600 nm, corresponding to the electronic transitions of ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂. A strong chemiluminescence intensity characteristic of europium(III) ions in the system tetracycline–H₂O₂–Fe(II)/(III)–Eu(III), as contrasted to the emission of the system tetracycline–H₂O₂–Fe(II)/(III) without Eu(III), proves that the Eu(III) ion plays the role of a chemiluminescence sensitizer, accompanying tetracycline oxidation in the Fenton system (H₂O₂–Fe(II)/(III)). A linear dependence was observed for the integrated CL light intensity on the tetracycline concentration in the range of 2 × 10⁻⁷ to 3 × 10⁻⁵ mol l⁻¹ with the detection limit of 5 × 10⁻⁸ mol l⁻¹ in aqueous solution.     

Synthesis and electroluminescent properties of a carbozole-functionalized europium(III) complex

A novel europium(III) complex, tris(dibenzoylmethanate){1-[9-hexyl-9H-carbazole]-2-(2-pyridyl)-benzimidazole}europium(III) [Eu(DBM)₃(CAR-PyBM)] functionalized by a carbozole fragment, was synthesized and used as emitting material in organic electroluminescent (EL) devices. Compared with the device based on an unfunctional Eu(III) complex, [Eu(DBM)₃HPyBM] (HPyBM=2-(2-pyridyl)benzimidazole), the EL performances of the device using [Eu(DBM)₃(CAR-PyBM)] as an emitter was significantly enhanced due to the improvement of hole-transporting ability. The maximum efficiency and luminance of red emission achieved from the device with the configuration of ITO/N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′diamine (TPD, 50 nm)/ [Eu(DBM)₃(CAR-PyBM)] (30 nm)/1,3,5-tirs-(N-phenylbenzimidazol-2-yl)benzene (TPBI, 20 nm)/LiF (1.5 nm)/Al were 4.2 cd/A and 200 cd/m², respectively.     

Photoluminescence of fluoroacrylate polymers impregnated with Eu(bta)<Subscript>3</Subscript> using supercritical CO<Subscript>2</Subscript>

Optical properties (photoluminescence and absorption) of Eu(bta)₃(B) _n (B = H₂O or 1,10-phenanthroline) polycrystalline powders and fluoroacrylate polymers (FAPs) impregnated with these compounds using supercritical CO₂ (SC CO₂) were investigated. It was established that impregnation of Eu(bta)₃phen into the FAPs using an SC CO₂ solution was difficult to achieve. The type of B (ancillary ligand) and the polymer matrix were shown to influence the temperature quenching of photoluminescence of Eu³⁺ ions in the range 25–100°C. A comparative analysis of quantum yields (λ_ex = 300 and 380 nm) and photoluminescence decay times (λ_ex = 337.1 nm) for Eu(bta)₃B _n and for Eu(bta)₃B _n -doped FAPs was performed.     

Improved (1s)<Superscript>2</Superscript> variational model for helium

The ground-state energy of neutral helium is estimated variationally with a trial wavefunction of the form ϕ≈e ^−γ(rA/a _o)ⁿe^−γ(rB/a _o)ⁿ. This model represents a modification of traditional textbook examinations of this problem via inclusion of the power “n” as a second nonlinear variational parameter in addition to the usual effective nuclear charge γ and leads to an upper-limit on the ground state energy of −2.86107 E _h (E _h =1 hartree) in comparison with the traditional (n=1) result of −2.84766 E _h . This result represents a reduction of the percentage overestimate from the true ground-state energy (−2.90373 E _h ) of from 1.93 to 1.47. In comparison with the maximum accuracy obtainable from an uncorrelated trial wavefunction, −2.86168 E _h , the present trial wavefunction reduces the percentage overestimate from 0.49 (n=1) to 0.021. The optimum values of (n, γ) are determined to be ≈(0.897, 1.825).     

Structure,thermal properties,conductivity and electrochemical stability of di-urethanesil hybrids doped with LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

Variable chain length di-urethane cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks were prepared by application of a sol-gel strategy. These materials, designated as di-urethanesils (represented as d-Ut(Y′), where Y′ indicates the average molecular weight of the polymer segment), were doped with lithium triflate (LiCF₃SO₃). The two host hybrid matrices used, d-Ut(300) and d-Ut(600), incorporate POE chains with approximately 6 and 13 (OCH₂CH₂) repeat units, respectively. All the samples studied, with compositions ∞ > n ≥ 1 (where n is the molar ratio of (OCH₂CH₂) repeat units per Li⁺), are entirely amorphous. The di-urethanesils are thermally stable up to at least 200 °C. At room temperature the conductivity maxima of the d-Ut(300)- and d-Ut(600)-based di-urethanesil families are located at n = 1 (approximately 2.0 × 10⁻⁶ and 7.4 × 10⁻⁵ Scm⁻¹, respectively). At about 100 °C, both these samples also exhibit the highest conductivity of the two electrolyte systems (approximately 1.6 × 10⁻⁴ and 1.0 × 10⁻³ Scm⁻¹, respectively). The d-Ut(600)-based xerogel with n = 1 displays excellent redox stability.     

The Role of the Eu<Superscript>3+</Superscript> Concentration on the SrMoO<Subscript>4</Subscript>:Eu Phosphor Properties: Synthesis,Characterization and Photophysical Studies

SrMoO₄ doped with rare earth are still scarce nowadays and have attracted great attention due to their applications as scintillating materials in electro-optical like solid-state lasers and optical fibers, for instance. In this work Sr_1−xEu_xMoO₄ powders, where x = 0.01; 0.03 and 0.05, were synthesized by Complex Polymerization (CP) Method. The structural and optical properties of the SrMoO₄:Eu³⁺ were analyzed by powder X-ray diffraction patterns, Fourier Transform Infra-Red (FTIR), Raman Spectroscopy, and through Photoluminescent Measurements (PL). Only a crystalline scheelite-type phase was obtained when the powders were heat-treated at 800 °C for 2 h, 2θ = 27.8° (100% peak). The excitation spectra of the SrMoO₄:Eu³⁺ (λ_Em. = 614 nm) presented the characteristic band of the Eu^3 + 5L₆ transition at 394 nm and a broad band at around 288 nm ascribed to the charge-transfer from the O (2p) state to the Mo (4d) one in the SrMoO₄ matrix. The emission spectra of the SrMoO₄:Eu³⁺ powders (λ_Exc. = 394 and 288 nm) show the group of sharp emission bands among 523–554 nm and 578–699 nm, assigned to the ⁵D₁→⁷F_{0,1and 2} and ⁵D₀→⁷F_{0,1,2,3 and 4}, respectively. The band related to the ⁵D₀→⁷F₀ transition indicates the presence of Eu³⁺ site without inversion center. This hypothesis is strengthened by the fact that the band referent to the ⁵D₀→⁷F₂ transition is the most intense in the emission spectra.     

A Novel Hg<Superscript>2+</Superscript> Selective Ratiometric Fluorescent Chemodosimeter Based on an Intramolecular FRET Mechanism

A irreversible Hg²⁺ selective ratiometric fluorescence probe FR, a fluorescein fluorophore linked to a rhodamine B hydrazide by a thiourea spacer, was designed and synthesized. The developed probe FR exhibited great ratiometric fluorescence enhancement and remarkable yellow-magenta color change toward Hg²⁺ with excellent selectivity in aqueous acetone solution, and the ratiometric fluorescence response to Hg²⁺ was not interfered by other metal cations including Fe³⁺, Co²⁺, Ni²⁺, Cr³⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺ and Mn²⁺. The linear range and the detection limit of this supposed ratiometric fluorescence method for Hg²⁺ were 0.0–10.0 × 10⁻⁶ and 5 × 10⁻⁸ M, respectively.     

Synthesis, Characterization, DNA-Binding Properties of the Ln(III) Complexes with 6-Hydroxy Chromone-3-Carbaldehyde-(4′-Hydroxy) Benzoyl Hydrazone

6-Hydroxy chromone-3-carbaldehyde-(4′-hydroxy) benzoyl hydrazone (L) and its Ln (III) complexes, [Ln = La, Nd, Eu and Tb] have been prepared and characterized on the basis of elemental analyses, molar conductivities, mass spectra, ¹H NMR, thermogravimety/differential thermal analysis (TG-DTA), UV-vis spectra, fluorescence spectra and IR spectra. The formula of the complex is [Ln L·(NO₃)₂]·NO₃. Spectrometric titration, ethidium bromide displacement experiments and viscosity measurements indicate that Eu (III) complex bind with calf-thymus DNA, presumably via an intercalation mechanism. The intrinsic binding constant of Eu (III) with DNA was 2.48 × 10⁵ M⁻¹ through fluorescence titration data.     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>:CaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> crystal

The absorption spectra, fluorescence spectrum and fluorescence decay curve of Nd³⁺ ions in CaNb₂O₆ crystal were measured at room temperature. The peak absorption cross section was calculated to be 6.202×10⁻²⁰ cm² with a broad FWHM of 7 nm at 808 nm for E//a light polarization. The spectroscopic parameters of Nd³⁺ ions in CaNb₂O₆ crystal have been investigated based on Judd-Ofelt theory. The parameters of the line strengths Ω _t are Ω ₂=5.321×10⁻²⁰ cm²,Ω ₄=1.734×10⁻²⁰ cm²,Ω ₆=2.889×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 167 μs, 152 μs and 91%, respectively. The fluorescence branch ratios are calculated to be β ₁=36.03%,β ₂=52.29%,β ₃=11.15%,β ₄=0.533%. The emission cross section at 1062 nm is 9.87×10⁻²⁰ cm².     

Enhanced electroluminescence of Eu by Tb in complexes Tb1−xEux(TTA)3Dipy

A series of rare earth ternary compounds of Tb_1−xEu_x(TTA)₃Dipy (HTTA=thenoyltrifluoroacetone, Dipy=2,2′-dipyridyl) have been synthesized, and the characteristics of the compounds have been performed by DTA-TG, IR, UV and fluorescence spectroscopy. Photoluminescence measurements indicated that the complexes of Eu(III) emit strong red luminescence under UV radiation. IR spectra suggest that complexes have been successfully synthesized, and TG curves indicate that the complexes are stable up to a temperature of about 220 °C. The Eu complex was blended with poly(N-vinylcarbazole) (PVK) and spin coated into films, and electroluminescence devices with the structure of Indium Tin Oxide (ITO)/PVK:Tb_1−xEu_x(TTA)₃Dipy/BCP(2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline)/aluminum quinoline (AlQ)/Al were fabricated, the luminescence of Eu³⁺ complexes enhances after doping with Tb³⁺. Therefore, it may be an effective method to improve the EL intensity of the lanthanide complex.     

Spectroscopic properties of Er<Superscript>3+</Superscript> ions in LiNbO<Subscript>3</Subscript> crystals codoped with HfO<Subscript>2</Subscript>

The results of the spectroscopic analysis of transition strengths for Er³⁺ ions in a series of Hf:Er:LiNbO₃ crystals with variable Hf content and fixed Er content are reported. Unpolarized UV-VIS-NIR absorption spectra, upconversion fluorescence spectra excited at 800 nm, and microsecond time-resolved spectra excited at 400 nm and 800 nm by 800 nm femtosecond laser were measured at room temperature. The HfO₂ incorporation has influence on Er³⁺ radiative lifetimes, and fluorescence branching ratios. For Hf(4 mol %):Er(1 mol %):LiNbO₃, Ω₂=2.63×10^-20 cm², Ω₄=2.86×10^-20 cm², and Ω₆=0.72×10^-20 cm². Ω₂<Ω₄ is contrary to the Er³⁺ general trend of Ω₂>Ω₄>Ω₆ when the Hf content is below its threshold concentration. In addition, the sum of Ω increases with the Hf content when the HfO₂ content below 6 mol % is unfamiliar. The upconversion mechanism is discussed in this work. PACS 71.20.Eh; 77.84.Dy; 42.62.Fi; 42.65.Ky     

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

Synthesis, crystal structure and blue electroluminescence of a new zinc complex based on 2,6-bis(benzimidazolyl)pyridine

A very stable and blue luminescent complex Zn(bbp)Cl₂ (bbp: 2,6-bis(benzimidazolyl)pyridine) was synthesized. X-ray crystal structural analysis for the complex revealed that there are intermolecular π?π interactions in the solid state. The fluorescence properties for this complex were studied. The similar devices with the structure of [ITO/CuPc(31 nm)/NPB(80 nm)/[Zn(bbp)Cl₂] (or L) (85 nm)/LiF15/Al] were constructed to investigate their electroluminescent performance. Both the complex and the ligand can be fabricated as blue-emitting materials. The complex shows emission peak at 555 nm, electroluminescent efficiency 0.017 cd A⁻¹ and turn-on voltage 7 V, compared to 470 nm, 0.036 cd A⁻¹ and 9 V for the ligand.     

A terbium (III) complex with triphenylamine-functionalized ligand for organic electroluminescent device

A novel ligand, 4-diphenylamino-benzoic acid (HDPAB), and the corresponding Tb (III) complex, Tb (DPAB)₃ which can be dissolved easily in organic solvents were synthesized and characterized. Organic electroluminescent (EL) device with a structure of indium tin oxide (ITO)/poly(N-vinylcarbazole) (PVK): Tb (DPAB)₃ (50 wt%, 80 nm)/1,3,5-tris-(N-phenylbenzimidazol-2-yl)benzene (TPBI) (30 nm)/tri(8-hydroxyquinoline)aluminum (AlQ) (20 nm)/LiF (1 nm)/Al (150 nm) in which Tb (DPAB)₃ acted as an emitter were fabricated. The maximum luminance of 230 cd m⁻² at 20 V and the maximum efficiency of 0.62 cd A⁻¹ were obtained due to the introduction of hole-transporting group, representing the best result to date among Tb (III) carboxylate complexes based EL devices. These results indicate that modifications of rare earth complexes are a promising way to improve the properties of EL devices.