Ag/Ag_3PO_4/g-C_3N_4复合光催化剂的合成与再生及其可见光下的光催化性能(英文)

研究了用离子交换沉淀法制备的Ag/Ag3PO4/g-C3N4的可见光光催化性能及再生方法.通过X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、紫外-可见(UV-Vis)吸收光谱及X射线光电子能谱(XPS)对其进行了结构特性分析.XRD结果显示再生后催化剂的结构未发生改变.FESEM及UV-Vis分析结果说明催化剂由Ag3PO4与g-C3N4复合而成.XPS分析结果表明催化剂表面出现少量的银单质.利用可见光(λ420nm)照射下的苯酚降解实验评价了样品的光催化活性,并通过活性物种及能带结构的分析对催化剂的光催化机理进行了推测.研究表明,Ag/Ag3PO4/g-C3N4的光催化活性明显高于纯Ag3PO4及纯g-C3N4,主要原因归结为单质银、Ag3PO4及g-C3N4的协同效应.经过氧化氢和磷酸氢铵钠(NaNH4HPO4)的再生可完全恢复催化剂的活性,这表明该绿色环保的再生方法可实现Ag/Ag3PO4/g-C3N4催化剂在环境中的实际应用.     

可见光响应的Co3(PO4)2/Ag3PO4纳米复合光催化剂的制备及表征

采用简单的化学偏聚法合成出Ag3PO4纳米颗粒、磷酸钴(Co3(PO4)2,CoP)纳米片以及它们两者的纳米复合结构(CoP/Ag3PO4),同时还比较了它们的可见光催化活性.采用场发射扫描电镜(FESEM)、X射线衍射(XRD)、紫外-可见(UV-Vis)吸收光谱以及光致发光谱等手段对其形貌、结构、光学以及可见光催化性能等进行表征.结果表明,CoP/Ag3PO4复合纳米结构的可见光降解甲基橙(MO)的速率和循环稳定性均明显优于其它两种物质.这表明CoP应该起着共催化剂的作用,它能够抑制光生电子与空穴之间的复合,并且提供大量高活性的光生空穴.此外,我们还发现CoP/Ag3PO4降解另一种阳离子型染料——罗丹明B(RhB)的能力则远不如纯Ag3PO4,这可能是与光催化剂的表面性质发生改变有关,造成更低的RhB吸附能力.本文提供了一种廉价制备高效可见光催化剂的新方法.     

g-C_3N_4/BiOBr异质结光催化剂的制备与可见光催化活性

以三聚氰胺作为合成g-C_3N_4纳米片的前躯体,以Bi(NO3)3·5H2O和KBr作为合成BiOBr的原料,采用水热法构建g-C_3N_4/Bi OBr二维异质结可见光催化剂,有效的晶面复合和合适的能带组合有助于增强g-C_3N_4和BiOBr的可见光催化活性。利用X射线衍射(XRD)、透射电镜(TEM)、X射线光电子能谱(XPS)、光致发光光谱(PL)和紫外-可见漫反射光谱(UVvis DRS)等方法表征其结构、光学性质以及组成结构。在可见光(λ420 nm)下以光催化降解RhB来评价合成催化剂的光催化活性,结果表明,g-C_3N_4/BiOBr光催化降解罗丹明B(Rh B)的效率高于单体g-C_3N_4和BiOBr,并对g-C_3N_4/BiOBr增强可见光催化RhB机理进行解释。     

Ni5P4/g-C3N4复合光催化剂的制备及光催化性能

使用尿素、 红磷和氯化镍为原料, 通过一种简单的焙烧方法合成了Ni₅P₄/g-C₃N₄光催化剂. 该催化剂形成的异质结可以降低界面电阻, 有效抑制光生电子-空穴对复合率. 以罗丹明B模拟污染物进行降解测试, 发现3NPC的反应速率常数最高, 几乎是g-C₃N₄的7倍, 并具有最高的光催化产氢能力, 制氢速率高达1013.88 μmol·g^-1·h^-1, 明显高于g-C₃N₄(664.38 μmol·g^-1·h^-1).     

Z型光催化剂Sb2WO6/g-C3N4的制备及光催化性能

通过水热反应合成了Sb₂WO₆改性的g-C₃N₄复合材料(Sb₂WO₆ /g-C₃N₄). 通过X射线衍射(XRD)、 扫描电子显微镜(SEM)、 紫外-可见漫散射反射光谱(UV-Vis DRS)和光致发光光谱(PL)等表征了样品的性质. 结果表明, Sb₂WO₆在g-C₃N₄的表面上生长, 并且复合材料光吸收能力有一定的增强, 光生电子-空穴的重组率降低. 通过罗丹明B(RhB)的光降解评价了Sb₂WO₆/g-C₃N₄复合材料的光催化性能. 结果表明, 模拟日光下Sb₂WO₆质量分数为10%的Sb₂WO₆/g-C₃N₄复合材料在60 min内对RhB的降解率为99.3%, 高于纯g-C₃N₄和Sb₂WO₆. Sb₂WO₆/g-C₃N₄复合材料的这种高度增强的光催化活性主要归因于强的界面相互作用促进了光生电子-空穴分离和迁移. 添加自由基清除剂的实验结果表明, ·O^2-和h⁺是光催化反应中的主要活性物质. Sb₂WO₆/g-C₃N₄复合材料在几个反应周期内表现出优异的稳定性. 根据实验结果提出了一种可能的Z型光催化机理.     

GO/Ag3PO4复合光催化剂的制备、表征及光催化性能

以石墨粉为原料,采用Hummers氧化法合成氧化石墨烯(GO).然后在超声作用下,将不同含量的Ag₃PO₄沉积在GO上,制备了一系列4% (w,质量分数) GO/Ag₃PO₄、8% GO/Ag₃PO₄、16% GO/Ag₃PO₄和32% GO/Ag₃PO₄复合光催化剂.对所制备的光催化剂运用N₂物理吸附、X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱、傅里叶变换红外(FT-IR)光谱、紫外-可见漫反射吸收光谱(UV-Vis DRS)等手段进行了表征,并在可见光下考察了GO含量对Ag₃PO₄光催化降解甲基橙(MO)的性能.结果表明, GO能够和Ag₃PO₄实现均匀复合.复合GO提高了催化剂的比表面积,改善了催化剂的吸附性能.复合16% GO使Ag₃PO₄光催化活性提高最显著, 120 min内对MO的降解率达到83%,是纯Ag₃PO₄光催化活性的7.5倍. GO能提高催化剂的比表面积,促进光生电子-空穴(e^-/h⁺)的分离,产生更多活性自由基,从而提高Ag₃PO₄光催化的活性和稳定性.     

Preparation of Ag3PO4/AgBr Hybrids Using a Facile Grinding Method and Their Applications as Photocatalysts

Highly efficient visible-light-induced Ag₃PO₄/AgBr hybrids were prepared via a facile and effective grinding method. The synthetic route was simply achieved through the grinding of Ag₃PO₄ with NaBr in an agate mortar at room temperature. During the grinding process, the mechanochemical effect induced the solid-state reaction of Ag₃PO₄ and NaBr to form AgBr nanoparticles on the surface of the Ag₃PO₄ particles. After calcination and wa-shing, Ag₃PO₄/AgBr hybrids were obtained. The AgBr shells prevented photocorrosion and improved the structural stability in water. Interestingly, the compositions, morphologies and optical absorption properties of the Ag₃PO₄/AgBr hybrids could be finely controlled by adjusting the NaBr content and grinding time. The photocatalytic activities of the as-prepared samples were investigated in terms of the degradation of rhodamine B(RhB) under visible light irradiation. The photocatalytic activities of the Ag₃PO₄/AgBr hybrids were much improved compared to those of of Ag₃PO₄ or AgBr individually. Under visible light irradiation for 1 h, the Ag₃PO₄/AgBr hybrids exhibited a 66.8%-76.8% increase in photocatalytic efficiency compared to pure Ag₃PO₄.     

Ag_3PO_4表面热力学性质及光催化原位过程热动力学的晶面效应

采用湿化学法制备了立方体{100}、四面体{111}和菱形十二面体{110}磷酸银微晶,通过场发射扫描电镜(FE-SEM),X射线粉末衍射(XRD),固体紫外可见漫反射光谱(UV-Vis DRS),光电流,光致发光(PL)对催化剂的组分、结构、形貌及光电性质进行了系统表征。以罗丹明B(Rh B)为目标污染物,对不同形貌Ag_3PO_4微晶的可见光催化活性进行了探究。通过微热量技术结合过渡态理论和热化学循环原理对Ag_3PO_4的摩尔表面Gibbs自由能进行了测定,其数值分别为1.2972、0.9621、0.5414 k J?mol-1。采用自主设计的新型LED光-微热量系统获取了Ag_3PO_4原位光催化降解Rh B 2 h的热效应和稳定放热阶段的热焓变化率,并对其热谱曲线进行了合理的解析。结果表明,Ag_3PO_4的催化活性与原位光催化降解Rh B的热效应、热焓变化率以及摩尔表面Gibbs自由能皆呈正相关。此外,通过捕获剂实验和电子顺磁共振(ESR)确定了Ag_3PO_4光催化降解Rh B过程的主要活性基团。     

磁性AgBr/Ag3PO4/ZnFe2O4复合催化剂的制备及光催化性能

水热法结合原位沉淀法成功制备新型磁性溴化银/磷酸银/铁酸锌(AgBr/Ag₃PO₄/ZnFe₂O₄)复合催化剂,并通过X射线衍射、能量色散X射线、场发射扫描电子显微镜、透射电子显微镜和紫外-可见漫反射光谱对其晶相结构、组成、形貌及吸光性能进行了表征。在可见光照射下,所制备的AgBr/Ag₃PO₄/ZnFe₂O₄复合催化剂光催化降解罗丹明B (RhB)的活性优于Ag3PO4/ZnFe₂O₄、AgBr/ZnFe₂O₄和P25 TiO₂。在酸性和碱性溶液中,AgBr/Ag₃PO₄/ZnFe₂O₄光催化剂呈现出优良光催化性能。在AgBr/Ag₃PO₄/ZnFe₂O₄体系中,光催化降解RhB的速率随着反应体系温度的升高而增大,由阿伦尼乌斯方程计算获得反应体系活化能为31.9 kJ·mol^-1。AgBr/Ag₃PO₄/ZnFe₂O₄复合材料优异的可见光催化活性归因于光生电荷的有效分离,所产生的超氧自由基和空穴是RhB降解的主要活性物种。     

Cu2+改性g-C3N4光催化剂的光催化性能

Photocatalytic technology can effectively solve the problem of increasingly serious water pollution, the core of which is the design and synthesis of highly efficient photocatalytic materials. Semiconductor photocatalysts are currently the most widely used photocatalysts. Among these is graphitic carbon nitride (g-C₃N₄), which has great potential in environment management and the development of new energy owing to its low cost, easy availability, unique band structure, and good thermal stability. However, the photocatalytic activity of g-C₃N₄ remains low because of problems such as wide bandgap, weakly absorb visible light, and the high recombination rate of photogenerated carriers. Among various modification strategies, doping modification is an effective and simple method used to improve the photocatalytic performance of materials. In this work, Cu/g-C₃N₄ photocatalysts were successfully prepared by incorporating Cu²⁺ into g-C₃N₄ to further optimize photocatalytic performance. At the same time, the structure, morphology, and optical and photoelectric properties of Cu/g-C₃N₄ photocatalysts were analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, UV-Vis diffuse reflectance spectroscopy (DRS), and photoelectric tests. XRD and XPS were used to ensure that the prepared photocatalysts were Cu/g-C₃N₄ and the valence state of Cu was in the form of Cu²⁺. Under visible light irradiation, the photocatalytic activity of Cu/g-C₃N₄ and pure g-C₃N₄ photocatalysts were investigated in terms of the degradation of RhB and CIP by comparing the amount of introduced copper ions. The experimental results showed that the degradation ability of Cu/g-C₃N₄ photocatalysts was stronger than that of pure g-C₃N₄. The N₂ adsorption-desorption isotherms of g-C₃N₄ and Cu/g-C₃N₄ demonstrated that the introduction of copper had little effect on the microstructure of g-C₃N₄. The small difference in specific surface area indicates that the enhanced photocatalytic activity may be attributed to the effective separation of photogenerated carriers. Therefore, the enhanced photocatalytic degradation of RhB and CIP over Cu/g-C₃N₄ may be due to the reduction of carrier recombination rate by copper. The photoelectric test showed that the incorporation of Cu²⁺ into g-C₃N₄ could reduce the electron-hole recombination rate of g-C₃N₄ and accelerate the separation of electron-hole pairs, thus enhancing the photocatalytic activity of Cu/g-C₃N₄. Free radical trapping experiments and electron spin resonance indicated that the synergistic effect of superoxide radicals (O₂^•−), hydroxyl radicals (•OH) and holes could increase the photocatalytic activity of Cu/g-C₃N₄ materials.     

Graphitic Carbon Nitride Microspheres Supportedα-FeO(OH)Hybrids for Visible Light Photodegradation of MO

Graphitic carbon nitride(g-C3N4)microspheres supported a-FeO(OH)hybrids[α-FeO(OH)/g-C3N4]were prepared by means of a self-assembly method in deionized water.By UV-visible diffiise reflectance spectroscopy,it has been confirmed thatα-FeO(OH)/g-C3N4 has a wider absorption range thanThe feature ofα-FeO(OH)/g-C3N4 can be attributed to the efficient separation of the electron-hole pairs with photoluminescence spectra.The degradation rate of methyl orange(MO)is up to 99%under the optimal conditions of 110 min,initial concentration of 30 mg/L,anα-FeO(OH)/g-C3N4 dosage of 15 mg as well as visible light.The mechanism for this photocatalytic reaction was proposed,with hydroxyl radicals being a major active catalytic species.     

Z型可见光催化剂Au NPs/g-C3N4/BiOBr的构建及其光催化性能

通过水热和原位还原法制备了一种新型Z型异质结三元复合材料Au NPs/g-C₃N₄/BiOBr,并通过X射线衍射、X射线光电子能谱、透射电子显微镜、紫外-可见漫反射光谱和光致发光发射光谱等技术对材料的形貌、结构进行了表征。通过在可见光下降解苯酚来评价光催化剂的活性。研究发现,Au NPs/g-C₃N₄/BiOBr显示出增强的光催化活性,对苯酚的降解能力是g-C₃N₄的3倍,是BiOBr的2.5倍。这可归因于三元复合材料的窄带隙（2.10eV）、Z型机理对光生电子-空穴对的有效分离和Au纳米颗粒的表面等离子体共振效应（SPR）。     

熔盐辅助法制备g-C3N4纳米结构及其光催化制氢性能

以尿素作为原料, 采用熔盐辅助热聚合法在KCl-NaCl-BaCl₂体系中制备了带隙可调的g-C₃N₄纳米结构. 采用X射线衍射仪、 扫描电子显微镜、 X射线光电子能谱仪、 紫外-可见漫反射光谱仪及荧光光谱仪对产物的结构、 形貌、 成分及光学性能进行了表征. 对g-C₃N₄纳米结构可见光条件下的光催化制氢性能进行了测试, 研究了不同的尿素/熔盐比对其光催化性能的影响. 结果表明, 熔盐辅助热聚合法制备的g-C₃N₄ 纳米结构吸收光谱出现明显宽化, 吸收边由普通热聚合法制备g-C₃N₄的约450 nm红移至约500 nm左右. 同时光生载流子复合几率明显降低, 从而有效提升其光催化制氢性能. 最优化的g-C₃N₄(60)样品析氢速率达到12301.1 μmol?g^?1?h^?1, 为普通热聚合法制备g-C₃N₄析氢速率的4倍.     

WO3/g-C3N4异质结催化剂的制备及其氧化脱硫性能

以尿素和钨酸铵为原料采用浸渍法制备了金属氧化物三氧化钨（WO₃）与石墨相氮化碳（g-C₃N₄）异质结复合材料WO₃/g-C₃N₄。采用XRD、UV-vis、SEM、PL和XPS表征手段考察了催化剂的理化性质,发现WO₃与g-C₃N₄存在较好的相互作用和电子转移,保证了WO₃/g-C₃N₄本身所具有较高的氧化脱硫活性。以WO₃/g-C₃N₄作为催化剂,过氧化氢异丙苯为氧化剂,考察其光催化氧化脱硫性能,在反应温度80℃,O/S物质的量比为3.0的反应条件下,反应180 min,二苯并噻吩（DBT）转化率可以达到72.79%。通过游离基捕获实验,发现超氧自由基（·O₂^-）、电子（e^-）、羟基自由基（·OH）起到了促进反应速率的作用,并对该体系的反应机理进行了探讨。     

NiWO_4/g-C_3N_4的制备及其在离子液体中氧化脱硫性能的研究

采用水热法合成了NiWO_4纳米粒子,然后通过混合煅烧法成功地制备了负载型催化剂NiWO_4/g-C_3N_4。采用XRD、FT-IR、EDS、SEM、BET和XPS表征了NiWO_4/g-C_3N_4的形貌和结构特征。以NiWO_4/g-C_3N_4为催化剂,过氧化氢为氧化剂,1-丁基-3-甲基咪唑四氟硼酸盐离子液体([BMIM]BF4)为萃取剂。考察了催化剂的负载量,过氧化氢、离子液体和催化剂使用量,反应温度,反应时间,不同种类的含硫化合物对脱硫效果的影响。结果表明,在5 m L模拟油,0.2 m L过氧化氢,1.0 m L的[BMIM]BF4,0.03 g的NiWO_4/g-C_3N_4,反应温度为80℃,反应时间为140 min的最佳的反应条件下,脱硫率可以达到97.35%。实验表明,NiWO_4/g-C_3N_4具有很好的催化稳定性,催化剂重复使用五次后催化活性并没有明显地降低。     

Recent advances in the improvement of g-C3N4 based photocatalytic materials

g-C₃N₄ have been widely used in the fields of photocatalytic hydrogen production,photocatalytic degradation of dyes and oxidative degradation of toxic gases due to their excellent performance.It has attracted extensive attention in recent years due to its highly efficient photocatalytic capacity of hydrogen generation,water oxidation,carbon dioxide reduction and degradation of organic pollutants.Because of the abundant carbon and nitrogen composition of the earth,large-scale production and industrial applications of this material are possible.The modification of this material makes its performance more excellent so that this new material can obtain a steady stream of vitality.These outstanding works have become important materials and milestones on the road to mankind's photocatalytic hydrogen production.This review will begin with the basic idea of designing,synthesizing and improving g-C₃N₄ based photocatalytic materials,and introduce the latest development of g-C₃N₄ photocatalysts in hydrogen production from four aspects of controlling the carbon/nitrogen ratio,morphology,element doping and heterojunction structure of g-C₃N₄ materials.     

Ag3PO4量子点/石墨相氮化碳纳米片复合光催化剂的制备及其对苯甲醇选择性氧化活性

以热氧化剥离法得到的超薄石墨相氮化碳(g-C₃N₄)纳米片为载体,首次在室温条件下,制备了系列Ag₃PO₄量子点/g-C₃N₄纳米片复合光催化剂;通过透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见漫反射光谱(UV-Vis DRS)、荧光光谱(PL),对复合光催化剂的形貌、结构和光学性质进行了表征,考察了系列光催化剂对苯甲醇的光催化选择性氧化性能。 结果表明,粒径为3~5 nm Ag₃PO₄颗粒均匀分散g-C₃N₄纳米片上,结晶度良好。 以乙腈为溶剂时,当m(Ag₃PO₄)/m(g-C₃N₄)=0.6时,苯甲醇具有32.1%的最大转化率,对产物苯甲醛具有90%的最高选择性;活性物种捕捉实验结果表明,该催化氧化反应的主要活性物是光生空穴的氧化作用,能带计算结果表明,该复合催化剂结构具有合适的苯甲醇的氧化电位而选择性生成苯甲醛。     

Enhanced Visible-light Photocatalytic Activity of g-C3N4/Nitrogen-doped Graphene Quantum Dots/TiO2 Ternary Heterojunctions for Ciprofloxacin Degradation with Narrow Band Gap and High Charge Carrier Mobility

Limited visible-light absorption and high recombination rate of photogenerated charges are two main drawbacks in g-C₃N₄-based photocatalysts. To solve these problems, g-C₃N₄/nitrogen-doped graphene quantum dots (NGQDs)/TiO₂ ternary heterojunctions were facilely prepared via a one-step calcining method. The morphology, structure, optical and electrochemical properties of g-C₃N₄/NGQDs/TiO₂ were characterized and explored. The optimal g-C₃N₄/NGQDs/TiO₂ composite exhibits enhanced photocatalytic degradation performance of ciprofloxacin (CIP) compared with the as-prepared g-C₃N₄, TiO₂(P25) and g-C₃N₄/TiO₂ heterojunction under visible light irradiation. The apparent rate constant of the composite is around 6.43, 4.03 and 2.30 times higher than those of g-C₃N₄, TiO₂ and g-C₃N₄/TiO₂, respectively. The enhanced photocatalytic efficiency should be mainly attributed to the improvement of light absorption and charge separation and transfer efficiency, originating from the narrow band gap and high charge carrier mobility. The active species trapping experiments results showed that the h⁺ and ^·O₂^- were the main active species in the degradation process. A possible photocatalytic reaction mechanism of the g-C₃N₄/NGQDs/TiO₂ composite for the enhanced degradation of CIP under visible light irradiation was also proposed.     

具有高效界面电荷转移的0D/2D Bi4V2O11/g-C3N4梯形异质结的设计合成及抗生素降解性能研究

随着工业技术的飞速发展,大量有机污染物被应用于生活的各个领域,由此带来了严重的环境问题。众所周知,半导体光催化技术是一种有效且环境友好的降解去除典型污染物的方法,而光催化剂在该技术的应用中起着关键作用。因此,在光催化污染物降解领域,人们已经尝试研究了各种半导体材料。其中石墨相氮化碳(g-C₃N₄)是近年来公认的“明星”材料之一。因其独特的二维层状结构和良好的可见光响应而引起了人们的极大兴趣。由于带隙较窄(~2.7 eV)、能带结构可调以及良好的物理化学稳定性,g-C₃N₄对太阳光谱的吸收可达450 nm,具有一定的可见光光催化性能。然而,g-C₃N₄在去除抗生素和染料方面的降解效率仍然存在不足,例如光生电荷的快速复合以及空穴的氧化能力弱等。为了优化这种有前景的光催化材料,人们尝试了多种方法来改善g-C₃N₄的电子能带结构,例如金属/非金属元素掺杂、形貌调控和官能团修饰等。最近,人们提出了由两种N型半导体光催化剂组成的梯形异质结理念,它可以利用半导体材料更正的价带和更负的导带。相关结果表明,构筑梯形异质结是提高g-C₃N₄光催化活性的最有效方法之一。因此,本文通过简单的原位溶剂热生长法制备了新型0D/2D Bi₄V₂O₁₁/g-C₃N₄梯形异质结光催化剂。Bi₄V₂O₁₁/g-C₃N₄复合材料对去除土霉素(OTC)和活性红染料展示出了优异的光催化活性。尤其是BVCN-50复合材料对OTC和活性红的降解效率高达74.1%和84.2%,该过程的主要活性物种为·O₂^-。大幅增强的光催化性能归因于Bi₄V₂O₁₁和g-C₃N₄之间形成的梯形异质结保持了光催化体系的强氧化还原能力(Bi₄V₂O₁₁的强氧化能力和g-C₃N₄的强还原能力),并促进了光生电荷的空间分离。此外,金属Bi⁰的表面等离子共振效应可以拓宽异质结系统的光吸收范围。此外,基于高效液相色谱-质谱联用(LC-MS)分析,我们研究了OTC降解过程中可能的中间体和降解路径。这项工作为设计和制备g-C₃N₄基梯形异质结用于抗生素和活性染料降解提供了一种新的策略。     

太阳光响应型Ag2S/Ag3PO4复合材料的制备及催化降解水杨酸

以AgNO₃, Na₂HPO₄和硫粉为原料, 采用共沉淀-水热法合成了具有太阳光响应型Ag₂S/Ag₃PO₄复合材料, 运用扫描电子显微镜(SEM)、 X射线粉末衍射(XRD)、 X射线光电子能谱(XPS)和紫外-可见漫反射(UV-Vis DR)光谱等方法对样品进行了表征, 并在模拟太阳光条件下, 考察了Ag₂S/Ag₃PO₄对水杨酸的光催化降解效率. 结果表明, 与Ag₃PO₄相比, Ag₂S的负载量为1%(质量分数)时Ag₂S/Ag₃PO₄粒径变小, 呈立方晶相结构; Ag₂S/Ag₃PO₄复合材料可以有效促进光生电子-空穴分离, 使Ag₃PO₄禁带宽度降低到2.24 eV, 并增强了可见光的吸收能力. 在Ag₂S负载量为1%, 120 ℃水热4 h条件下, Ag₂S/Ag₃PO₄复合材料具有最佳光催化活性, 经模拟太阳光照射60 min对10 mg/L的水杨酸去除率达到88.2%.