类铜Au50+离子电子碰撞激发特性的研究

利用全相对论扭曲波（RDW）方法,系统计算了类铜Au50+离子的外壳层电子4s激发到4l 、5l （ l= s、p、d、f,除去4s-4s ）和内壳层电子3l （l = s、p、d）激发到4l 、5l （l = s、p、d、f）的碰撞激发截面,研究了在不同入射电子能量下截面的变化规律,给出了3d-4f 和3d-5f 精细结构能级的碰撞激发截面。部分计算结果与其它理论及最新实验结果进行了比较,取得了很好的一致性。     

类镍Au~(51+)离子电子碰撞激发特性的研究

利用全相对论扭曲波方法和研究电子碰撞激发过程的计算程序REIE06系统计算了类镍Au~(51+)离子从基态(3s~23p~63d~(10))n=3壳层3 l(l=s、p、d)电子激发到4 l、5 l(l=s、p、d、f)的碰撞激发强度和截面,研究了在不同入射电子能量下截面的变化规律,通过对类镍Au51+离子涉及X射线激光跃迁的相关能级电子碰撞激发速率的计算,分析了等离子体中电子温度对碰撞过程的影响.部分计算结果与其它理论及实验结果进行了比较,取得了很好的一致性.     

类锌Au~(49+)离子电子碰撞激发速率系数的研究

利用全相对论扭曲波方法和研究电子碰撞激发过程的计算程序REIE06系统计算了类锌Au~(49+)离子从基态(3s~23p~63d~(10)4s~2)的4s、3d、3p和3s电子激发到4 l(l=p、d、f)和5 l(l=s、p、d、f)的碰撞激发强度,研究了在不同入射电子能量下碰撞强度的变化规律,通过对类锌Au~(49+)离子涉及金激光等离子体M带谱,3d→4f和3d→5f电子碰撞激发速率的计算,分析了等离子体中电子温度对碰撞过程的影响.部分计算结果与其它理论及实验结果进行了比较,取得了很好的一致性.     

高离化态类氖离子的电子碰撞激发特性研究

利用基于多组态Dirac-Fock(MCDF)理论方法的原子结构和性质计算程序GRASP92和全相对论扭曲波电子碰撞激发计算程序REIE06,系统计算了类氖离子(Z=50—57)激发组态2s22p53l和2s2p63l(l=s,p,d)的能级结构和碰撞激发截面,总结了碰撞激发截面随入射电子能量的变化规律,讨论了实验中感兴趣的(2p1/23d3/2)1→2s22p61S0(标记为3C线)与(2p3/23d5/2)1→2s22p61S0(标记为3D线)跃迁线强度比值的沿等电子系列特性和强组态相互作用对高离化态类氖离子截面的影响.     

高离化态类镍离子电子碰撞激发过程的相对论扭曲波理论研究

利用相对论扭曲波方法和新发展的研究电子碰撞激发过程的计算程序REIE06,系统计算了电子碰撞激发高离化态类镍Gd³⁶⁺和Rn⁵⁸⁺—U⁶⁴⁺(Z=86—92)离子从基态到4l(l=s,p,d,f)次壳层精细结构能级的碰撞强度和截面.研究了随等电子系列变化时,从基态到与X射线激光有关的3d⁹4p和3d⁹4d激发态能级的电子碰撞激发截面随Z的变化,讨论了强的组态相互作用对高离化态类镍离子截面的影响.通过对Gd³⁶⁺离子涉及X射线激光跃迁的相关能级电子碰撞激发速率系数的计算,分析了等离子体中电子温度对碰撞过程的影响.同时,目前部分计算结果与以往的理论结果进行了比较,得到了很好的一致性. 关键词： 电子碰撞激发 相对论扭曲波方法 高离化态类镍离子     

Ca原子4s2-4s4p电子碰撞激发特性

基于全相对论扭曲波（RDW）电子碰撞激发计算程序REIE06,系统计算了Ca原子基态3p64s2 1S0到激发态3p64s4p 3P0,1,2 1P1精细结构能级的碰撞截面,总结了在不同入射电子能量下碰撞截面的变化规律。目前计算中,细致考虑了电子关联效应和Breit相互作用,计算结果与已有的理论计算进行比较,对实验值的相对误差较小。     

Mo XIV离子精细结构能级和辐射寿命

用全相对论多组态自洽场方法 ,计算了类铜离子MoXIV的 1s ,2s ,2p- ,2p ,3s,3p- ,3p ,3d- ,3d ,4s,4p- ,4p ,4d- ,4d ,4f- ,4f,5s,5p- ,5p ,5d- ,5d ,5f- ,5f ,5g- ,5g ,6s,6p- ,6p ,6d- ,6d ,6f- ,6f,6g- ,6g ,6h- ,6h ,7s,7p- ,7p ,7d- ,7d ,7f- ,7f,7g- 和 7g轨道的 15 0 8个精细结构能级和辐射寿命以及其它各种跃迁参数 ,能级的计算值和实验值符合得很好 .另外还发现了一些寿命较长的能级. Energy levels, radiative lifetime and various transition parameters for allowed transitions among the 1 508 fine-structure levels belong to the (1s 22s 22p 63s 23p 6) 3d 104l, 3d 94l 2, 3d 105l, 3d 94l4m, 3d 106l, 3d 107l and so on configurations of the Cu-like ions Mo XIV have been calculated by using the expanded fully relativistic GRASP code. The results are compared with those available in the literature, and the accuracy of the present data is assessed. En...     

类镍钨离子共振激发速率系数

本文利用基于相对论组态混合的扭曲波近似方法，细致研究了类镍钨离子从基态到3l^-14l＇（l=s，p，d；l’=0—3）各组态共106条单激发态能级，通过类铜双激发态3l^174l’n＇l＂和3l^175l’n＂l＂的电子碰撞共振激发速率系数．本工作的结果与R矩阵计算值相比较存在较大差别，     

类硅离子精细结构能级和辐射寿命

用全相对论多组态自洽场方法,计算了类硅离子的1s、2s、2p-、2p 、3s、3p-、3p、3d-、3d、4s、4p-、4p、4d-、4d、4f-、4f、5s、5p-、5p、 5d-、5d、5f-、5f、5g-、5g、6s、6p-、6p轨道的912个精细结构能级和辐射寿命以及各种跃迁参数.能级的计算值和实验值符合得很好.从计算结果中发现了一些亚稳态能级.     

类铟钡离子辐射光谱的相对论识别

用全相对论多组态自洽场方法,计算了高离化类铟钡离子的1s、2s、2p-、2p、3s、3p-、3p、3d-、3d、4s、4p-、4p、4d-、4d、4f-、4f、5s、5p-、5p、5d-、5d、5f-、5f、5g-、5g、6s、6p-、6p、6d-、6d、6f-、6f、6g-、6g、7s、7p-、7p、7d-、7d、7f-、7f、7g-、7g轨道的3090个精细结构能级和辐射寿命以及各种跃迁参数.波长的计算值和实验值符合得较好.另外还发现了一些辐射寿命较长的亚稳态能级.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.