Structures, host-guest chemistry and mechanism of stepwise self-assembly of M4L6 tetrahedral cage complexes

The ligand L(bip), containing two bidentate pyrazolyl-pyridine termini separated by a 3,3'-biphenyl spacer, has been used to prepare tetrahedral cage complexes of the form [M(4)(L(bip))(6)]X(8), in which a bridging ligand spans each of the six edges of the M(4) tetrahedron. Several new examples have been structurally characterized with a variety of metal cation and different anions in order to examine interactions between the cationic cage and various anions. Small anions such as BF(4)(-) and NO(3)(-) can occupy the central cavity where they are anchored by an array of CH···F or CH···O hydrogen-bonding interactions with the interior surface of the cage, but larger anions such as naphthyl-1-sulfonate or tetraphenylborate lie outside the cavity and interact with the external surface of the cage via CH···π interactions or CH···O hydrogen bonds. The cages with M = Co and M = Cd have been examined in detail by NMR spectroscopy. For [Co(4)(L(bip))(6)](BF(4))(8) the (1)H NMR spectrum is paramagnetically shifted over the range -85 to +110 ppm, but the spectrum has been completely assigned by correlation of measured T(1) relaxation times of each peak with Co···H distances. (19)F DOSY measurements on the anions show that at low temperature a [BF(4)](-) anion diffuses at a similar rate to the cage superstructure surrounding it, indicating that it is trapped inside the central cage cavity. Furthermore, the equilibrium step-by-step self-assembly of the cage superstructure has been elucidated by detailed modeling of spectroscopic titrations at multiple temperatures of an acetonitrile solution of L(bip) into an acetonitrile solution of Co(BF(4))(2). Six species have been identified: [Co(2)L(bip)](4+), [Co(2)(L(bip))(2)](4+), [Co(4)(L(bip))(6)](8+), [Co(4)(L(bip))(8)](8+), [Co(2)(L(bip))(5)](4+), and [Co(L(bip))(3)](2+). Overall the assembly of the cage is entropy, and not enthalpy, driven. Once assembled, the cages show remarkable kinetic inertness due to their mechanically entangled nature: scrambling of metal cations between the sites of pure Co(4) and Cd(4) cages to give a statistical mixture of Co(4), Co(3)Cd, Co(2)Cd(2), CoCd(3) and Cd(4) cages takes months in solution at room temperature.     

Structures and dynamic behavior of large polyhedral coordination cages: an unusual cage-to-cage interconversion

The bis-bidentate bridging ligand L {α,α'-bis[3-(2-pyridyl)pyrazol-1-yl]-1,4-dimethylbenzene}, which contains two chelating pyrazolyl-pyridine units connected to a 1,4-phenylene spacer via flexible methylene units, reacts with transition metal dications to form a range of polyhedral coordination cages based on a 2M:3 L ratio in which a metal ion occupies each vertex of a polyhedron, a bridging ligand lies along every edge, and all metal ions are octahedrally coordinated. Whereas the Ni(II) complex [Ni(8)L(12)](BF(4))(12)(SiF(6))(2) is an octanuclear cubic cage of a type we have seen before, the Cu(II), Zn(II), and Cd(II) complexes form new structural types. [Cu(6)L(9)](BF(4))(12) is an unusual example of a trigonal prismatic cage, and both Zn(II) and Cd(II) form unprecedented hexadecanuclear cages [M(16)L(24)]X(32)(X = ClO(4) or BF(4)) whose core is a skewed tetracapped truncated tetrahedron. Both Cu(6)L(9) and M(16)L(24) cages are based on a cyclic helical M(3)L(3) subunit that can be considered as a triangular "panel", with the cages being constructed by interconnection of these (homochiral) panels with additional bridging ligands in different ways. Whereas [Cu(6)L(9)](BF(4))(12) is stable in solution (by electrospray mass spectrometry, ES-MS) and is rapidly formed by combination of Cu(BF(4))(2) and L in the correct proportions in solution, the hexadecanuclear cage [Cd(16)L(24)](BF(4))(32) formed on crystallization slowly rearranges in solution over a period of several weeks to the trigonal prism [Cd(6)L(9)](BF(4))(12), which was unequivocally identified on the basis of its (1)H NMR spectrum. Similarly, combination of Cd(BF(4))(2) and L in a 2:3 ratio generates a mixture whose main component is the trigonal prism [Cd(6)L(9)](BF(4))(12). Thus the hexanuclear trigonal prism is the thermodynamic product arising from combination of Cd(II) and L in a 2:3 ratio in solution, and arises from both assembly of metal and ligand (minutes) and rearrangement of the Cd(16) cage (weeks); the large cage [Cd(16)L(24)](BF(4))(32) is present as a minor component of a mixture of species in solution but crystallizes preferentially.     

Discrete and infinite 1D, 2D/3D cage frameworks with inclusion of anionic species and anion-exchange reactions of Ag3L2 type receptor with tetrahedral and octahedral anions

Complexes [PF6 subset(Ag3(titmb)2](PF6)2 (8) and {SbF6 subset[Ag3(titmb)2](SbF6)2}.H2O.1.5 CH3OH (9) are obtained by reaction of titmb and Ag+ salts with different anions (PF6(-) and SbF6(-)), and crystal structures reveal that they are both M3L2 cage complexes with short Ag...F interactions between the silver atoms and the fluorine atoms of the anions. In complex 8, a novel cage dimer is formed by weak Ag...F contacts; an unique cage tetramer formed via Ag...pi interactions (Ag...eta5-imidazole) between dimers and an infinite 1D cage chain is presented. However, each of the external non-disordered SbF6(-) anions connect with six cage 9s via Ag...F contacts, and each cage 9 in turn connects with three SbF6(-) anions to form a 2D network cage layer; and the layers are connected by pi-pi interactions to form a 3D network. The anion-exchange reactions of four Ag3L2 type complexes ([BF4 subset(Ag3(titmb)2](BF4)2 (6), [ClO4 subset(Ag3(titmb)2](ClO4)2 (7b), [PF6 subset(Ag3(titmb)2](PF6)2 (8) and [SbF6 subset(Ag3(titmb)2](SbF6)2.1.5CH3OH (9)) with tetrahedral and octahedral anions (ClO4(-), BF4(-), PF6(-) and SbF6(-)) are also reported. The anion-exchange experiments demonstrate that the anion selective order is SbF6(-) > PF6(-) > BF4(-), ClO4(-), and this anion receptor is preferred to trap octahedral and tetrahedral anions rather than linear or triangle anions; SbF6(-) is the biggest and most preferable one, so far. The dimensions of cage complexes with or without internal anions, anion-exchange reactions, cage assembly and anion inclusions, silver(I) coordination environments, Ag-F and Ag-pi interactions of Ag3L2 complexes 1-9 are discussed.     

Redox-switched complexation/decomplexation of K(+) and Cs(+) by molecular cyanometalate boxes

The reaction of [N(PPh(3))(2)][CpCo(CN)(3)] and [Cb*Co(NCMe)(3)]PF(6) (Cb* = C(4)Me(4)) in the presence of K(+) afforded {K subset[CpCo(CN)(3)](4)[Cb*Co](4)}PF(6), [KCo(8)]PF(6). IR, NMR, ESI-MS indicate that [KCo(8)]PF(6) is a high-symmetry molecular box containing a potassium ion at its interior. The analogous heterometallic cage {K subset[Cp*Rh(CN)(3)](4)[Cb*Co](4)}PF(6) ([KRh(4)Co(4)]PF(6)) was prepared similarly via the condensation of K[Cp*Rh(CN)(3)] and [Cb*Co(NCMe)(3)]PF(6). Crystallographic analysis confirmed the structure of [KCo(8)]PF(6). The cyanide ligands are ordered, implying that no Co-CN bonds are broken upon cage formation and ion complexation. Eight Co-CN-Co edges of the box bow inward toward the encapsulated K(+), and the remaining four mu-CN ligands bow outward. MeCN solutions of [KCo(8)](+) and [KRh(4)Co(4)](+) were found to undergo ion exchange with Cs(+) to give [CsCo(8)](+) and [CsRh(4)Co(4)](+), both in quantitative yields. Labeling experiments involving [(MeC5H4)Co(CN)(3)]- demonstrated that Cs(+)-for-K(+) ion exchange is accompanied by significant fragmentation. Ion exchange of NH(4+) with [KCo(8)](+) proceeds to completion in THF solution, but in MeCN solution, the exclusive products were [Cb*Co(NCMe)(3)]PF(6) and the poorly soluble salt NH(4)CpCo(CN)(3). The lability of the NH(4+)-containing cage was also indicated by the rapid exchange of the acidic protons in [NH(4)Co(8)](+). Oxidation of [MCo(8)](+) with 4 equiv of FcPF(6) produced paramagnetic (S = 4/2) [Co(8)](4+), releasing Cs(+) or K(+). The oxidation-induced dissociation of M(+) from the cages is chemically reversed by treatment of [Co(8)](4+) and CsOTf with 4 equiv of Cp(2)Co. Cation recognition by [Co(8)] and [Rh(4)Co(4)] cages was investigated. Electrochemical measurements indicated that E(1/2)(Cs(+))--E(1/2)(K(+)) approximately 0.08 V for [MCo(8)](+).     

Coordination chemistry of tetradentate N-donor ligands containing two pyrazolyl-pyridine units separated by a 1,8-naphthyl spacer: dodecanuclear and tetranuclear coordination cages and cyclic helicates

The tetradentate ligand L(naph) contains two N-donor bidentate pyrazolyl-pyridine units connected to a 1,8-naphthyl core via methylene spacers; L45 and L56 are chiral ligands with a structure similar to that of L(naph) but bearing pinene groups fused to either C4 and C5 or C5 and C6 of the terminal pyridyl rings. The complexes [Cu(L(naph))](OTf) and [Ag(L(naph))](BF4) have unremarkable mononuclear structures, with Cu(I) being four-coordinate and Ag(I) being two-coordinate with two additional weak interactions (i.e., "2 + 2" coordinate). In contrast, [Cu4(L(naph))4][BF4]4 is a cyclic tetranuclear helicate with a tetrafluoroborate anion in the central cavity, formed by an anion-templating effect; electrospray mass spectrometry (ESMS) spectra show the presence of other cyclic oligomers in solution. The chiral ligands show comparable behavior, with [Cu(L45)](BF4) and [Ag(L45)](ClO4) having similar mononuclear crystal structures and with the ligands being tetradentate chelates. In contrast, [Ag4(L56)4](BF4)4 is a cyclic tetranuclear helicate in which both diastereomers of the complex are present in the crystal; the two diastereomers have similar gross geometries but are significantly different in detail. Despite their different crystal structures, [Ag(L45)](ClO4) and [Ag4(L56)4](BF4)4 behave similarly in solution according to ESMS studies, with a range of cyclic oligomers (up to Ag9L9) forming. With transition-metal dications Co(II), Cu(II), and Cd(II), L(naph) generates a series of unusual dodecanuclear coordination cages [M12(L(naph))18]X24 (X- = ClO4- or BF4-) in which the 12 metal ions occupy the vertices of a truncated tetrahedron and a bridging ligand spans each of the 18 edges. The central cavity of each cage can accommodate four counterions, and each cage molecule is chiral, with all 12 metal trischelates being homochiral; the crystals are racemic. Extensive aromatic stacking between ligands around the periphery of the cages appears to be a significant factor in their assembly. The chiral analogue L45 forms the simpler tetranuclear, tetrahedral coordination cage [Zn4(L45)6](ClO4)(8), with one anion in the central cavity; the steric bulk of the pinene chiral auxiliaries prevents the formation of a dodecanuclear cage, although trace amounts of [Zn12(L45)18](ClO4)24 can be detected in solution by ESMS. Formation of [Zn4(L45)6](ClO4)8 is diastereoselective, with the chirality of the pinene groups controlling the chirality of the tetranuclear cage.     

Subtle role of polyatomic anions in molecular construction: structures and properties of AgX bearing 2,4'-thiobis(pyridine) (X(-) = NO(3)(-), BF(4)(-), ClO(4)(-), PF(6)(-), CF(3)CO(2)(-), and CF(3)SO(3)(-))

Studies on the subtle effects and roles of polyatomic anions in the self-assembly of a series of AgX complexes with 2,4'-Py(2)S (X(-) = NO(3)(-), BF(4)(-), ClO(4)(-), PF(6)(-), CF(3)CO(2)(-), and CF(3)SO(3)(-); 2,4'-Py(2)S = 2,4'-thiobis(pyridine)) have been carried out. The formation of products appears to be primarily associated with a suitable combination of the skewed conformers of 2,4'-Py(2)S and a variety of coordination geometries of Ag(I) ions. The molecular construction via self-assembly is delicately dependent upon the nature of the anions. Coordinating anions afford the 1:1 adducts [Ag(2,4'-Py(2)S)X] (X(-) = NO(3)(-) and CF(3)CO(2)(-)), whereas noncoordinating anions form the 3:4 adducts [Ag(3)(2,4'-Py(2)S)(4)]X(3) (X(-) = ClO(4)(-) and PF(6)(-)). Each structure seems to be constructed by competition between pi-pi interactions of 2,4'-Py(2)S spacers vs Ag.X interactions. For ClO(4)(-) and PF(6)(-), an anion-free network consisting of linear Ag(I) and trigonal Ag(I) in a 1:2 ratio has been obtained whereas, for the coordinating anions NO(3)(-) and CF(3)CO(2)(-), an anion-bridged helix sheet and an anion-bridged cyclic dimer chain, respectively, have been assembled. For a moderately coordinating anion, CF(3)SO(3)(-), the 3:4 adduct [Ag(3)(2,4'-Py(2)S)(4)](CF(3)SO(3))(3) has been obtained similarly to the noncoordinating anions, but its structure is a double strand via both face-to-face (pi-pi) stackings and Ag.Ag interactions, in contrast to the noncoordinating anions. The anion exchanges of [Ag(3)(2,4'-Py(2)S)(4)]X(3) (X(-) = BF(4)(-), ClO(4)(-), and PF(6)(-)) with BF(4)(-), ClO(4)(-), and PF(6)(-) in aqueous media indicate that a [BF(4)(-)] analogue is isostructural with [Ag(3)(2,4'-Py(2)S)(4)]X(3) (X(-) = ClO(4)(-) and PF(6)(-)). Furthermore, the anion exchangeability for the noncoordinating anion compounds and the X-ray data for the coordinating anion compounds establish the coordinating order to be NO(3)(-) > CF(3)CO(2)(-) > CF(3)SO(3)(-) > PF(6)(-) > ClO(4)(-) > BF(4)(-).     

Metal-organic framework supported ionic liquid membranes for CO2 capture: anion effects

IRMOF-1 supported ionic liquid (IL) membranes are investigated for CO(2) capture by atomistic simulation. The ILs consist of identical cation 1-n-butyl-3-methylimidazolium [BMIM](+), but four different anions, namely hexafluorophosphate [PF(6)](-), tetrafluoroborate [BF(4)](-), bis(trifluoromethylsulfonyl)imide [Tf(2)N](-), and thiocyanate [SCN](-). As compared with the cation, the anion has a stronger interaction with IRMOF-1 and a more ordered structure in IRMOF-1. The small anions [PF(6)](-), [BF(4)](-), and [SCN](-) prefer to locate near to the metal-cluster, particularly the quasi-spherical [PF(6)](-) and [BF(4)](-). In contrast, the bulky and chain-like [BMIM](+) and [Tf(2)N](-) reside near the phenyl ring. Among the four anions, [Tf(2)N](-) has the weakest interaction with IRMOF-1 and thus the strongest interaction with [BMIM](+). With increasing the weight ratio of IL to IRMOF-1 (W(IL/IRMOF-1)), the selectivity of CO(2)/N(2) at infinite dilution is enhanced. At a given W(IL/IRMOF-1), the selectivity increases as [Tf(2)N](-) < [PF(6)](-) < [BF(4)](-) < [SCN](-). This hierarchy is predicted by the COSMO-RS method, and largely follows the order of binding energy between CO(2) and anion estimated by ab initio calculation. In the [BMIM][SCN]/IRMOF-1 membrane with W(IL/IRMOF-1) = 1, [SCN](-) is identified to be the most favorable site for CO(2) adsorption. [BMIM][SCN]/IRMOF-1 outperforms polymer membranes and polymer-supported ILs in CO(2) permeability, and its performance surpasses Robeson's upper bound. This simulation study reveals that the anion has strong effects on the microscopic properties of ILs and suggests that MOF-supported ILs are potentially intriguing for CO(2) capture.     

A series of complexes of the phosphorus-based TTF ligand o-P2 with the metal ions Fe(II), Co(II), Ni(II), Pd(II), Pt(II), and Ag(I)

Reactions of 3,4-dimethyl-3',4'-bis(diphenylphosphino)tetrathiafulvalene, o-P2, with [BF(4)](-) salts of Fe(ii), Co(ii), Ni(II), Pd(II), and Pt(II) yield complexes of general formula [M(o-P2)(2)][BF(4)](2). Similar reactions between o-P2 and AgSbF(6) or AgPF(6) produced the salts [Ag(o-P2)(2)][X] where X = [SbF(6)](-) or [PF(6)](-). The resulting compounds were fully characterized by (1)H and (31)P{(1)H} NMR, infrared and electronic absorption spectroscopies, cyclic voltammetry, FAB-MS and single-crystal X-ray diffraction. The paramagnetic Co(II) compound exhibits an S = 3/2 state with large spin-orbit coupling contribution at higher temperatures and an effective S' = 1/2 state below 20 K. Electrochemical studies of the compounds indicate that the two functionalized TTF ligands are not in electronic communication and that they essentially behave as isolated redox centers.     

Heterometallic modular metal-organic 3D frameworks assembled via new tris-β-diketonate metalloligands: nanoporous materials for anion exchange and scaffolding of selected anionic guests

The modular engineering of heterometallic nanoporous metal-organic frameworks (MOFs) based on novel tris-chelate metalloligands, prepared using the functionalised β-diketone 1,3-bis(4'-cyanophenyl)-1,3-propanedione (HL), is described. The complexes [M(III)L(3)] (M=Fe(3+), Co(3+)) and [M(II)L(3)](NEt(4)) (M=Mn(2+), Co(2+), Zn(2+), Cd(2+)) have been synthesised and characterised, all of which exhibit a distorted octahedral chiral structure. The presence of six exo-oriented cyano donor groups on each complex makes it a suitable building block for networking through interactions with external metal ions. We have prepared two families of MOFs by reacting the metalloligands [M(III)L(3)] and [M(II)L(3)](-) with many silver salts AgX (X=NO(3)(-), BF(4)(-), PF(6)(-), AsF(6)(-), SbF(6)(-), CF(3)SO(3)(-), tosylate), specifically the [M(III)L(3)Ag(3)]X(3)·Solv and [M(II)L(3)Ag(3)]X(2)·Solv network species. Very interestingly, all of these network species exhibit the same type of 3D structure and crystallise in the same trigonal space group with similar cell parameters, in spite of the different metal ions, ionic charges and X(-) counteranions of the silver salts. We have also succeeded in synthesising trimetallic species such as [Zn(x)Fe(y)L(3)Ag(3)](ClO(4))((2x+3y))·Solv and [Zn(x)Cd(y)L(3)Ag(3)](ClO(4))(2)·Solv (with x+y=1). All of the frameworks can be described as sixfold interpenetrated pcu nets, considering the Ag(+) ions as simple digonal spacers. Each individual net is homochiral, containing only Δ or Λ nodes; the whole array contains three nets of type Δ and three nets of type Λ. Otherwise, taking into account the presence of weak Ag-C σ bonds involving the central carbon atoms of the β-diketonate ligands of adjacent nets, the six interpenetrating pcu networks are joined into a unique non-interpenetrated six-connected frame with the rare acs topology. The networks contain large parallel channels of approximate hexagonal-shaped sections that represent 37-48% of the cell volume and include the anions and many guest solvent molecules. The guest solvent molecules can be reversibly removed by thermal activation with retention of the framework structure, which proved to be stable up to about 270°C, as confirmed by TGA and powder XRD monitoring. The anions could be easily exchanged in single-crystal to single-crystal processes, thereby allowing the insertion of selected anions into the framework channels.     

Self‐assembly of anion‐binding supramolecular cage complexes

Three tetradentate ligands, in which two bidentate pyrazolyl–pyridine binding sites are connected by an aromatic spacer unit, have been used to prepare adamantoid tetrahedral cages of the form [Co₄L₆(X)][X]₇ (where X is a uninegative, noncoordinating counterion such as perchlorate, tetrafluoroborate, or hexafluorophosphate). In these complexes an approximately tetrahedral array of metal ions occurs, with a bridging ligand spanning each of the six edges of this tetrahedron; each metal ion is accordingly six coordinate and the cages can have either T or C₃ symmetry, depending on the ligand. The central cavity of each cage is occupied by an anion. In the cases where the anion is a good fit for the central cavity, it is tightly bound (no exchange in solution with external anions) and acts as a template for assembly of the cage, with a mixture of Co(II) and the bridging ligand in the correct proportions not assembling into the Co₄L₆ cage until the templating anion is added. With a longer bridging ligand, the central cavity is too large to encapsulate the anion completely, and accordingly the encapsulated anion can exchange freely with external anions; this behavior can be “frozen out” in the NMR spectra at low temperatures. The host–guest chemistry of the cage complexes is therefore strongly dependent on the size of the central cavity. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:567–573, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10101     

Environmental control of solution speciation in cobalt(II) 2,2':6',2'-terpyridine complexes: anion and solvent dependence

In methanol or chloroform/methanol solutions, reactions of Cltpy or MeOtpy (Rtpy = 4'-R-2,2':6',2'-terpyridine) with CoX(2)·xH(2)O (X(-) = Cl(-), [OAc](-), [NO(3)](-) or [BF(4)](-)) result in the formation of equilibrium mixtures of [Co(Rtpy)(2)](2+) and [Co(Rtpy)X(2)]. A study of the solution speciation has been carried out using (1)H NMR spectroscopy, aided by the dispersion of signals in the paramagnetically shifted spectra; on going from a low- to high-spin cobalt(II) complex, proton H(6) of the tpy ligand undergoes a significant shift to higher frequency. For R = Cl and X(-) = [OAc](-), increasing the amount of CD(3)OD in the CD(3)OD/CDCl(3) solvent mixture affects both the relative proportions of [Co(Cltpy)(2)](2+) and [Co(Cltpy)(OAc)(2)] and the chemical shifts of the (1)H NMR resonances arising from [Co(Cltpy)(OAc)(2)]. When the solvent is essentially CDCl(3), the favoured species is [Co(Cltpy)(OAc)(2)]. For the 4'-methoxy-2,2':6',2'-terpyridine, the speciation of mono- and bis(terpyridine)cobalt(II) complexes depends upon the anion, solvent and ligand:Co(2+) ion ratio. The (1)H NMR spectrum of [Co(MeOtpy)(2)](2+) is virtually independent of anion and solvent. In contrast, the signals arising from [Co(MeOtpy)X(2)] depend on the anion and solvent. In the case of X(-) = [BF(4)](-), we propose that the mono(tpy) complex formed in solution is [Co(MeOtpy)L(n)](2+) (L = H(2)O or solvent, n = 1-3). The formation of mono(tpy) species has been confirmed by the solid state structures of [Co(Cltpy)(OAc-O)(OAc-O,O')], [Co(MeOtpy)(OAc-O)(OAc-O,O')], [Co(MeOtpy)(NO(3)-O)(2)(OH(2))] and [Co(MeOtpy)Cl(2)]. The single crystal structure of the cobalt(III) complex [Co(Cltpy)Cl(3)]·CHCl(3) is also reported.     

Chiral recognition and conglomerate crystallization induced by self-organization of cobalt(III) complexes of a tripodal ligand containing three imidazole groups

The effect of a counteranion on chiral recognition inducing conglomerate crystallization of a cobalt(III) complex is reported. An achiral tripodal ligand involving three imidazole groups, tris{[2-{(imidazol-4-yl)methylidene}amino]ethyl}amine (H3L), was prepared by condensation of tris(2-aminoethyl)amine and 4-formylimidazole in a 1:3 mole ratio. The reaction of H3L and trans-[CoIIICl2(py)4]+ afforded the chiral (Delta or Lambda) [CoIII(H3L)]3+ complex. The formally hemideprotonated complexes [CoIII(H(1.5)L)]X(1.5).nH2O (where X = Cl, Br, I, BF4, ClO4, or PF6) were synthesized by controlled deprotonation of the uncoordinated imidazole NH groups of [Co(H3L)]3+. In crystals of the hemideprotonated complex, two components, [Co(H3L)]3+ and [Co(L)], with the same absolute configuration are linked by imidazole-imidazolate hydrogen bonds to form an extended homochiral 2D sheet structure, which is composed of a hexanuclear unit with a trigonal void. There are two ways of stacking the sheets: One is via homochiral stacking, and the other is via heterochiral stacking. When the size of the counterion is small (i.e., X = Cl, Br, I, or BF4), adjacent homochiral sheets with the same chirality are stacked to form a homochiral crystal (conglomerate). With large anions (i.e., ClO4- and PF6-), a homochiral sheet consisting of Delta enantiomers and a sheet consisting of Lambda enantiomers are stacked alternately to give a heterochiral crystal (a racemic crystal). Optically active Lambda-[Co(H(1.5)L)](ClO4)(1.5).H2O was synthesized from Lambda-[Co(H3L)]3+, and the crystal structure was compared to that of the racemic complex. There are two conflicting factors governing the crystal structure: the skeletal density; the size of the channels. The 2D sheets are more closely packed in the homochiral crystal than in the heterochiral crystal. However, the channels, where the counterions are accommodated, are smaller in the homochiral crystal, and the steric congestion between the anions increases with increasing anion size. The heterochiral crystal has a flexible, zigzag channel structure, and the size of the channels can increase to accommodate larger anions. Thus, complexes with large anions (i.e., ClO4- and PF6-) preferentially form heterochiral crystals rather than homochiral crystals.     

Molecular squares, cubes and chains from self-assembly of bis-bidentate bridging ligands with transition metal dications

The two new ligands L(fur) and L(th) consist of two chelating pyrazolyl-pyridine termini connected to furan-2,5-diyl or thiophene-2,5-diyl spacers via methylene groups. Reaction of these with a range of transition metal dications that prefer octahedral coordination affords a series of unusual structures which are all based on a 2M : 3L ratio. [M(8)(L(fur))(12)]X(16) (M = Co, Cu, X = BF(4); and M = Zn, X = ClO(4)) are octanuclear cubes with approximate D(4) symmetry in which two cyclic tetranuclear helicate M(4)L(4) units are connected by four additional 'pillar' ligands. In contrast [Ni(4)(L(fur))(6)](BF(4))(8) is a centrosymmetric molecular square consisting of two dinuclear Ni(2)L(2) units of opposite chirality that are connected by a pair of additional L(fur) ligands such that the four edges of the Ni(4) square are spanned by alternately two and one bridging ligands. [M(4)(L(th))(6)](BF(4))(8) (M = Co, Ni, Cu) are likewise molecular squares with similar structures to [Ni(4)(L(fur))(6)](BF(4))(8) with the significant difference that the two crosslinked double helicate M(2)L(2) units are now homochiral. The Cd(II) complexes both behave quite differently to the first-row metal complexes, with [Cd(L(fur))(BF(4))](BF(4)) being a simple mononuclear complex with a single ligand in which the furan oxygen atom is weakly interacting with the Cd(II) centre. In contrast, in {[Cd(2)(L(th))(3)](BF(4))(4)}(∞), where this quasi-pentadentate coordination mode of the ligand is not possible because thiophene is too poor an electron donor, the ligand reverts to bis-bidentate bridging coordination to afford a one-dimensional chain consisting of an infinite sequence of crosslinked, homochiral, Cd(2)(L(th))(2) double helicate units.     

Binding properties of solvatochromic indicators [Cu(X)(acac)(tmen)] (X = PF6- and BF4-, acac- = Acetylacetonate, tmen = N,N,N',N'-tetramethylethylenediamine) in solution and the solid state

The solvatochromic indicator [Cu(acac)(tmen)(H 2O)].PF 6 ( 1.H 2O) has been synthesized and crystallographically characterized. 1.H 2O binds an H 2O molecule at the Cu(II) axial site, while the PF 6 (-) anion is coordination free. The binding properties of [Cu(PF 6)(acac)(tmen)] ( 1) and [Cu(BF 4)(acac)(tmen)] ( 2) have been investigated in solution and the solid state. The donor number of the PF 6 (-) anion (DN PF6) was determined from the UV-vis spectra of 1 in 1,2-dichloroethane. The value of DN PF6 of the PF 6 (-) anion is slightly larger than that of the tetraphenylborate anion (BPh 4 (-)), which is known as a noncoordinating anion. In the solid state, 1 and 2 reversibly bind and release H 2O molecules at the Cu(II) axial sites. The coordinated H 2O molecules in 2 are more easily removed than those in 1 because of the strong Lewis basicity of the BF 4 (-) anion compared to the PF 6 (-) ion. The lower melting point of 1 versus 2 is attributed to the loose binding of the PF 6 (-) anions to the Cu(II) centers, which induces the dynamic nature of the crystal.     

Flexibility of inorganic tennis ball structures inducing anion selectivity

Inorganic tennis balls (ITBs), [[{Pt(betmp)(dach)}(2)Cu](2)(X)][X](3) (in which X=ClO(4) (-) (3), NO(3) (-) (4), Cl(-) (5) and Br(-) (6); dach=trans-1,2-diaminocyclohexane and betmp=bisethylthiomethylidenepropanedioate) and [[{Pt(dteym)(dach)}(2)Cu](2)(PF(6))][PF(6)](3) (7; dteym=1,3-dithiepane-2-ylidenemalonate), were prepared as crystals. Investigation of their X-ray crystal structures revealed that shapes of the cavities in ITBs show significant distortions that depend on the properties of the encapsulated anions. The CuCu* distance was observed to be longest in 7 and shortest in 5, the difference between them being 2.05 A. The flexibility of cavity structures of ITBs makes it possible to encapsulate various anions inside the cavity, while their distortions may be a reason for the difference in the encapsulating ability for anions, that is, anion selectivity. Especially, the distortions observed in 7 are so severe that the encapsulating ability of the cavity for PF(6) (-) is very low compared to other anions. The shapes of ITBs with ClO(4) (-) and BF(4) (-) ions inside their cavities are very similar; however, ClO(4) (-) is encapsulated by the cavity better than BF(4) (-), which is explicable by the difference of metal-anion interactions. This structural study on ITBs gives a clue to the origin of the anion selectivity of the cavity in ITBs previously investigated by (19)F NMR spectroscopy of the ITBs in methanol.     

Self-assembled palladium(II) "click" cages: synthesis, structural modification and stability

Readily synthesised and functionalised di-1,2,3-triazole "click" ligands are shown to self-assemble into coordinatively saturated, quadruply stranded helical [Pd(2)L(4)](BF(4))(4) cages with Pd(II) ions. The cages have been fully characterised by elemental analysis, HR-ESMS, IR, (1)H, (13)C and DOSY NMR, DFT calculations, and in one case by X-ray crystallography. By exploiting the CuAAC "click" reaction we were able to rapidly generate a small family of di-1,2,3-triazole ligands with different core spacer units and peripheral substituents and examine how these structural modifications affected the formation of the [Pd(2)L(4)](BF(4))(4) cages. The use of both flexible (1,3-propyl) and rigid (1,3-phenyl) core spacer units led to the formation of discrete [Pd(2)L(4)](BF(4))(4) cage complexes. However, when the spacer unit of the di-1,2,3-triazole ligand was a 1,4-substituted-phenyl group steric interactions led to the formation of an oligomeric/polymeric species. By keeping the 1,3-phenyl core spacer constant the effect of altering the "click" ligands' peripheral substituents was also examined. It was shown that ligands with alkyl, phenyl, electron-rich and electron-poor benzyl substituents all quantitatively formed [Pd(2)L(4)](BF(4))(4) cage complexes. The results suggest that a wide range of functionalised palladium(II) "click" cages could be rapidly generated. These novel molecules may potentially find uses in catalysis, molecular recognition and drug delivery.     

Anion-dependent formation of helicates versus mesocates of triple-stranded M2L3 (M = Fe2+, Cu2+) complexes

A series of dinuclear triple-stranded complexes, [Fe(2)L(3)?X]X(6) [X = BF(4)(-) (1), ClO(4)(-) (2)], [Fe(2)L(3)?SO(4)](2)(SO(4))(5) (3), [Fe(2)L(3)?Br](BPh(4))(6) (4), Fe(2)L(3)(NO(3))Br(6) (5), and [Cu(2)L(3)?NO(3)](NO(3))(6) (6), which incorporate a central cavity to encapsulate different anions, have been synthesized via the self-assembly of iron(II) or copper(II) salts with the N,N'-bis[5-(2,2'-bipyridyl)methyl]imidazolium bromide (LBr) ligand. X-ray crystallographic studies (for 1-4 and 6) and elemental analyses confirmed the cagelike triple-stranded structure. The anionic guest is bound in the cage and shows remarkable influence on the outcome of the self-assembly process with regard to the configuration at the metal centers. The mesocates (with different configurations at the two metal centers) have formed in the presence of large tetrahedral anions, while helicates (with the same configuration at both metal centers) were obtained when using the relatively smaller spherical or trigonal-planar anions Br(-) or NO(3)(-).     

New nickel(II) and iron(II) helicates and tetrahedra derived from expanded quaterpyridines

As an extension of prior studies involving the linear quaterpyridine ligand, 5,5'-dimethyl-2,2':5',5':2',2'-quaterpyridine 1, the synthesis of the related expanded quaterpyridine derivatives 2 and 3 incorporating dimethoxy-substituted 1,4-phenylene and tetramethoxy-substituted 4,4'-biphenylene bridges between pairs of 2,2'-bipyridyl groups has been carried out via double-Suzuki coupling reactions between 5-bromo-5'-methyl-2'-bipyridine and the appropriate di-pinacol-diboronic esters using microwave heating. Reaction of 2 and 3 with selected Fe(II) or Ni(II) salts yields a mixture of both [M(2)L(3)](4+) triple helicates and [M(4)L(6)](8+) tetrahedra, in particular cases the ratio of the products formed was shown to be dependent on the reaction conditions; the respective products are all sufficiently inert to allow their chromatographic separation and isolation. Longer reaction times and higher concentrations were found to favour tetrahedron formation. The X-ray structures of solvated [Ni(2)(2)(3)](PF(6))(4), [(PF(6)) ? Fe(4)(2)(6)](PF(6))(7), [Fe(4)(3)(6)](PF(6))(8) and [Ni(4)(3)(6)](PF(6))(8) have been determined, while the structure of the parent Fe(II) cage in the series, [(PF(6)) ? Fe(4)(1)(6)](PF(6))(7), was reported previously. The internal volumes of the Fe(II) tetrahedral cages have been calculated and increase from 102 ?(3) for [Fe(4)(1)(6)](8+) to 227 ?(3) for [Fe(4)(2)(6)](8+) to 417 ?(3) for [Fe(4)(3)(6)](8+) and to an impressive 839 ?(3) for [Ni(4)(3)(6)](8+). The corresponding void volume in the triple helicate [Ni(2)(2)(3)](4+) is 29 ?(3).     

Anion-templated synthesis of metallacages as a means for the colorimetric detection of chlorides

In the presence of chloride or bromide in the appropriate mixture of solvents, 6 equiv of nickel(II) and 8 equiv of Hatu [Hatu=H2NC(=NH)NHC(=S)NH2] assemble to yield the metallacages [Ni6(atu)8X][ClO4]3 (atu=deprotonated form of Hatu; X=Cl, 5; Br, 6) where four "units" of the square-planar complex Ni(atu)2 are coordinated to two further nickel centers, forming an octahedral cage around an encapsulated chloride or bromide anion. Synthesis of the cages is highly dependent on the nature of the anions and the solvents used. In methanol, the cage only forms if chloride is present; in a mixture of acetone/methanol, the cage forms in the presence of either chloride or bromide. An interesting feature of the templation process is that there is a dramatic color change associated with assembly of the building blocks in the presence of the appropriate anion to yield the cages. This color change has been used as the basis for the colorimetric detection of chloride anions in methanol. The reaction of 4 equiv of nickel(II), 8 equiv of Hatu, and 2 equiv of platinum(II) has also been carried out, yielding the mixed-metal cage [Pt2Ni4(atu)8Cl][ClO4]3 (7a); the X-ray crystal structure of this compound is reported herein.     

Ni(Et2PCH2NMeCH2PEt2)2]2+ as a functional model for hydrogenases

The reaction of Et(2)PCH(2)N(Me)CH(2)PEt(2) (PNP) with [Ni(CH(3)CN)(6)](BF(4))(2) results in the formation of [Ni(PNP)(2)](BF(4))(2), which possesses both hydride- and proton-acceptor sites. This complex is an electrocatalyst for the oxidation of hydrogen to protons, and stoichiometric reaction with hydrogen forms [HNi(PNP)(PNHP)](BF(4))(2), in which a hydride ligand is bound to Ni and a proton is bound to a pendant N atom of one PNP ligand. The free energy associated with this reaction has been calculated to be -5 kcal/mol using a thermodynamic cycle. The hydride ligand and the NH proton undergo rapid intramolecular exchange with each other and intermolecular exchange with protons in solution. [HNi(PNP)(PNHP)](BF(4))(2) undergoes reversible deprotonation to form [HNi(PNP)(2)](BF(4)) in acetonitrile solutions (pK(a) = 10.6). A convenient synthetic route to the PF(6)(-) salt of this hydride involves the reaction of PNP with Ni(COD)(2) to form Ni(PNP)(2), followed by protonation with NH(4)PF(6). A pK(a) of value of 22.2 was measured for this hydride. This value, together with the half-wave potentials of [Ni(PNP)(2)](BF(4))(2), was used to calculate homolytic and heterolytic Ni-H bond dissociation free energies of 55 and 66 kcal/mol, respectively, for [HNi(PNP)(2)](PF(6)). Oxidation of [HNi(PNP)(2)](PF(6)) has been studied by cyclic voltammetry, and the results are consistent with a rapid migration of the proton from the Ni atom of the resulting [HNi(PNP)(2)](2+) cation to the N atom to form [Ni(PNP)(PNHP)](2+). Estimates of the pK(a) values of the NiH and NH protons of these two isomers indicate that proton migration from Ni to N should be favorable by 1-2 pK(a) units. Cyclic voltammetry and proton exchange studies of [HNi(depp)(2)](PF(6)) (where depp is Et(2)PCH(2)CH(2)CH(2)PEt(2)) are also presented as control experiments that support the important role of the bridging N atom of the PNP ligand in the proton exchange reactions observed for the various Ni complexes containing the PNP ligand. Similarly, structural studies of [Ni(PNBuP)(2)](BF(4))(2) and [Ni(PNP)(dmpm)](BF(4))(2) (where PNBuP is Et(2)PCH(2)N(Bu)CH(2)PEt(2) and dmpm is Me(2)PCH(2)PMe(2)) illustrate the importance of tetrahedral distortions about Ni in determining the hydride acceptor ability of Ni(II) complexes.