Zn-MOF-74负载离子液体的结构稳定性和吸附性能研究

离子液体(ILs)作为一种新型绿色溶剂应用广泛,以多孔材料MOFs作为支撑体负载ILs,不仅有望降低ILs的高粘性,而且有助于提高材料的吸附分离能力,但要如何选择适合MOFs体系来负载ILs是一个难点。本文采用密度泛函理论(DFT),利用VASP和Gaussian 09程序对负载[Emim][BF4]的Zn-MOF-74的结构稳定性进行系统研究,从几何结构、电荷分析、相互作用等方面将Zn-MOF-74@[Emim][BF4]复合体系与[Emim][BF4]和Zn-MOF-74比较分析。计算结果表明,负载[Emim][BF4]的Zn-MOF-74体系中,IL的阴离子与Zn-MOF-74的开放金属位点Zn发生强相互作用,Zn、F1原子之间因库仑力成键,造成了MOF-74配位构型的改变。IL的负载扰乱了Zn-MOF-74结构的对称性,增强了离子间相互作用。Zn-MOF-74@[Emim][BF4]复合体系形变过程伴随着电荷转移,其吸附能为-1.032e V,绘制的差分电荷以及相互作用图验证MOF和IL之间发生了化学吸附。本文还进一步探讨了负载ILs的Zn-MOF-74吸附能力,研究CO2在复合体系中吸附的作用机制。     

关于限域离子液体吸附CO_2的密度泛函理论(DFT)的研究

近年来,温室效应日趋严重,因此吸收CO_2的材料受到了广泛的关注.采用了密度泛函理论(DFT)研究以SiO_2为载体的限域离子液体对CO_2的吸附.对比纯净离子液体(ILs)以及限域离子液体与CO_2的相互作用情况,在这两种状态下两种体系的吸附情况大不相同.从几何结构、相互作用以及电荷分析等方面对ILs、 SiO_2以及ILs/SiO_2复合结构进行研究.计算结果表明,载体、离子液体和CO_2之间都存在较强的相互作用.离子液体的负载不仅改变了SiO_2载体的结构,而且受载体的影响阴阳离子之间的相互作用力也发生了改变.计算结果为进一步深入限域离子液体对CO_2的吸附打下了理论基础.     

一种室温离子液体与水相互作用的密度泛函理论研究

采用量子化学计算中的密度泛函理论(DFT),在B3LYP/6-31+G(d,p)计算水平上研究了离子液体1-乙基-3-甲基咪唑四氟硼酸盐([Emim]BF4)及其与水分子形成的复合物的稳定构型和相互作用能;经振动频率分析得到了[Emim]BF4及其与水的复合物的红外光谱.计算结果表明,相对于水分子与阳离子的作用而言,水分子与阴离子的作用对离子液体结构的影响更大.与此同时,实验测得的[Emim]BF4的红外光谱与计算结果吻合.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

1-乙胺基-3-甲基咪唑四氟硼酸盐吸收CO_2的理论研究

采用密度泛函理论(DFT)对离子液体1-乙胺基-3-甲基咪唑四氟硼酸盐([NH2e-mim][BF4])吸收CO_2的反应机理进行了研究.在B3LYP/6-311++G(d,p)计算水平下,对离子液体[NH2e-mim][BF4]的结构及与CO_2反应的中间体、过渡态和产物进行了全优化,获得了优化结构的构型参数、振动频率和热力学数据.利用自然键轨道(NBO)分析了离子液体[NH2e-mim][BF4]和CO_2的自然电荷布居.计算结果表明,通过阳离子[NH2e-mim]+自偶解离产生的阳离子[NH3e-mim]2+能与阴离子[BF4]-结合形成更强的离子键.根据反应吉布斯自由能变(ΔG0—)和焓变(ΔH0—)的计算结果,判断离子液体[NH2e-mim][BF4]吸收CO_2按理论摩尔比2∶1分步进行反应,吸收过程中质子的转移需克服52.51 k J/mol的能垒.     

[Bmim][DBP]离子液体与甲醇分子间的氢键作用机理及在萃取分离混合C_4烃/甲醇中的应用

研究了用离子液体(ILs)萃取分离混合C_4烃(C_4)中微量甲醇的过程.考察了不同组成的离子液体的萃取性能,发现1-丁基-3-甲基咪唑磷酸二丁酯([Bmim][DBP])具有最佳的萃取性能.采用量子化学方法,研究了[Bmim][DBP]与甲醇的作用机理.结果表明,在离子液体阴、阳离子以及离子液体与甲醇之间均存在稳定的氢键,并且氢键加强了分子间的相互作用.[Bmim][DBP]的阴离子[DBP]~-与甲醇中的—OH形成了键长为0.171 nm的氢键,其相互作用能为-62.08 k J/mol,强于其它阴离子与甲醇的相互作用能.还探讨了[Bmim][DBP]离子液体与混合C_4烃的比例、萃取时间及离子液体循环次数等因素对萃取效果的影响,结果表明,当m(ILs)∶m(C_4)=1∶2,于25℃萃取60 min时,萃取率为99.65%,离子液体循环使用5次后萃取率仍保持稳定.     

核磁方法研究离子液体与丙酮的相互作用

运用核磁共振手段, 研究了室温离子液体1-辛基-3-甲基咪唑四氟硼酸盐([C8mim][BF4])在不同比例的离子液体／丙酮混合体系中1H和13C的化学位移及13C的自旋-晶格弛豫时间(T1). 结果表明, 离子液体[C8mim][BF4]的阳离子芳环上的氢原子, 以及与氮原子直接相连的甲基和亚甲基上的氢原子都与丙酮羰基上的氧原子有相互作用, 从而减弱了离子液体阴阳离子间的强相互作用, 使离子液体的运动加快, 黏度降低.     

离子液体对植物水解酶抑制法测定克百威的影响

考察了N-丁基吡啶四氟硼酸盐([BPy][BF4])和1-丁基-3-甲基咪唑四氟硼酸盐([BMim][BF4])离子液体对植物水解酶抑制法测定克百威的影响(酶活性、抑制率、分析时间和检出限)。与未添加离子液体的磷酸缓冲溶液体系相比,农药对酶的抑制率在8%(V/V)[BPy][BF4]-磷酸缓冲溶液体系中提高了2.2倍,克百威的检出限降低了约1个数量级;同时加快了农药对酶的抑制速度,使分析时间缩短了4 min。添加[BMim][BF4]离子液体有类似的影响。     

反气相色谱法表征离子液体1-己基-3-甲基咪唑四氟硼酸盐的热力学参数（英文）

采用反气相色谱法(IGC)表征了离子液体(IL)1-己基-3-甲基咪唑四氟硼酸盐([HMIM]BF4)在343.15~373.15 K温度范围内的热力学参数。使用了一系列不同化学结构的探针分子测定[HMIM]BF4与溶剂之间的相互作用力。根据探针分子的保留时间计算得到探针分子与[HMIM]BF4之间的Flory-Huggins相互作用参数、摩尔吸附焓、无限稀释摩尔混合焓、摩尔蒸发焓、无限稀释活度系数以及[HMIM]BF4的溶解度参数。结果表明,n-C6、n-C7、n-C8、n-C9、乙醚、四氢呋喃、苯、环己烷为[HMIM]BF4的不良溶剂;甲苯、间二甲苯、甲醇、乙醇、二氯甲烷、四氯化碳、氯仿、丙酮、乙酸乙酯、乙酸甲酯为[HMIM]BF4的良溶剂。运用外推法得到了[HMIM]BF4在室温(298.15K)时的溶解度参数为23.70(J·cm-3)0.5。实验结果证明反气相色谱法是一种简便准确的获得离子液体热力学参数的方法。获得的热力学参数体现了这种离子液体与探针分子之间的相互作用力。本研究为离子液体的进一步应用提供了参考。     

半胱氨酸阴离子与咪唑阳离子间相互作用的理论研究

采用密度泛函理论在B3LYP/6-311＋G(d,p)水平上对1-乙基-3-甲基咪唑阳离子和半胱氨酸阴离子形成的气态阴阳离子对([Emim][Cys])进行理论研究. 通过几何结构优化以及频率分析得到势能面上7个稳定的离子对构型. 计算结果表明[Emim]＋和[Cys]－之间存在较强的氢键相互作用, 其稳定化能主要来源于[Cys]－中羰基O的孤对电子lp(O) 和[Emim]＋中C—H反键轨道 s*(C—H) 之间的相互作用, lp(O)®s*(C—H). [Emim][Cys]_S1是最稳定的离子对构型, 考虑BSSE的相互作用能为－387.66 kJ/mol. 从NPA和NBO分析以及AIM (Atoms in Molecules)计算等方面阐述了半胱氨酸阴离子与咪唑阳离子之间氢键相互作用的本质, 并初步探讨了阴阳离子对相互作用对氨基酸离子液体性质的影响.     

Copolymers dispersions designed to shaping of ceramic materials

Journal of Thermal Analysis and Calorimetry - To study the effect of ionic liquids (ILs) of the microstructure on the surface of the coal, four ILs ([Emim][BF4], [Bmim][BF4], [Bmim][NO3], and...     

Homogeneous enzymatic reactions in ionic liquids with poly(ethylene glycol)-modified subtilisin

Subtilisin Carlsberg was covalently modified with comb-shaped poly(ethylene glycol) (PM13). PM13-modified subtilisin (PM13-Sub) was readily solubilized in three different ionic liquids (ILs), i.e., [Emim][Tf2N], [C2OC1mim][Tf2N] and [C2OHmim][Tf2N]. Analysis of homogeneous enzymatic reactions in the ILs revealed that PM13-Sub exhibited excellent catalytic performance while the native enzyme suspended in ILs showed no activity. Hydrophobicity of ILs slightly affected enzyme activity, and the relatively hydrophobic IL [Emim][Tf2N] was the preferred medium for enzymatic reactions, similar to enzymatic reactions in conventional organic solvents. Enzyme activity was much higher in [Emim][Tf2N] than in conventional organic solvents, and excellent activity was associated with unique properties of ILs such as hydrophobicity and high polarity. Furthermore, PM13-Sub showed good stability in [Emim][Tf2N], and maintained 80% of its initial activity after 60 h.     

Unique role of hydrophilic ionic liquid in modifying properties of aqueous Triton X-100

Modification of important physicochemical properties of aqueous surfactant solutions can be achieved by addition of environmentally benign room temperature ionic liquids (ILs). While low aqueous solubility of "hydrophobic" ILs limits the amount of IL that may be added to achieve desired changes in the physicochemical properties, hydrophilic ILs do not have such restrictions associated to them. Alterations in the key physicochemical properties of aqueous solutions of a common nonionic surfactant Triton X-100 (TX100) on addition of up to 30 wt % hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) are reported. The presence of micellar aggregates in as high as 30 wt % [bmim][BF4]-added aqueous TX100 solutions is established by dynamic light scattering and fluorescence probe behavior. Increasing the concentration of [bmim][BF4] results in decrease in average micellar size and aggregation number and increase in critical micelle concentration, indicating an overall unfavorable aggregation process. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the palisade layer of the micellar phase upon [bmim][BF4] addition implies increased water penetration and the possibility of TX100-[bmim][BF4] interactions. While the changes in some of the physicochemical properties indicate the role of [bmim][BF4] to be similar to a cosurfactant, the IL acts like a cosolvent as far as changes in other properties are concerned. Effectiveness of IL [bmim][BF4] in modifying physicochemical properties of aqueous TX100 is demonstrated.     

Prediction of the solvation and structural properties of ionic liquids in water by two-dimensional correlation spectroscopy

Two-dimensional vibrational spectroscopy is applied to investigate the dilution process of 1-ethyl-3-methyl-imidazolium tetrafluoroborate ([Emim][BF4]) in water. With increasing water content in ionic liquid (IL)/water mixtures, the C-H stretching vibration of the imidazolium cation showed systematic blue-shifts, which reflect the weakening of the cohesion between the cation and anion of ILs. The two-dimensional IR results reveal that the ILs sense quite different environments during the whole dilution process. First, the three-dimensional network structure of pure ILs was destroyed gradually into ionic clusters, then the clusters were further dissociated into ionic pairs surrounded by water molecules, and finally the latter became the dominant form in bulk water. Within the concentration range we investigated (0.02相似文献   

Sonochemical formation of iron oxide nanoparticles in ionic liquids for magnetic liquid marble

Ionic liquids (ILs)-stabilized iron oxide (Fe(2)O(3)) nanoparticles were synthesized by the ultrasonic decomposition of iron carbonyl precursors in [EMIm][BF(4)] without any stabilizing or capping agents. The Fe(2)O(3) nanoparticles were isolated and characterized by X-ray powder diffraction, transmission electron microscopy and susceptibility measurements. The physicochemical properties of ILs containing magnetic Fe(2)O(3) nanoparticles (denoted as Fe(2)O(3)@[EMIm][BF(4)]), including surface properties, density, viscosity and stability, were investigated in detail and compared with that of [EMIm][BF(4)]. The Fe(2)O(3)@[EMIm][BF(4)] can be directly used as magnetic ionic liquid marble by coating with hydrophobic and unreactive polytetrafluoroethylene (PTFE), for which the effective surface tension was determined by the puddle height method. The resulting magnetic ionic liquid marble can be transported under external magnetic actuation, without detachment of magnetic particles from the marble surface that is usually observed in water marble.     

添加中低浓度离子液体[bmim][BF4]对吐温-20临界胶束浓度和胶束结构的影响

添加离子液体会对表面活性剂在水溶液中的聚集行为产生重要影响。本文研究了吐温-20在中低浓度离子液体四氟硼酸1-丁基-3-甲基咪唑鎓([bmim][BF_4])中的胶束化行为。随着[bmim][BF_4]浓度(cIL)从0增加到0.2mol·L~(-1),吐温-20的临界胶束浓度逐渐增大。相比cIL0.05mol·L~(-1),在cIL0.05mol·L~(-1)时加入[bmim][BF_4]使吐温-20临界胶束浓度增大得更加显著。吐温-20胶束聚集数随着离子液体浓度的增加而逐渐减小,这一结果也说明加入离子液体会对吐温-20胶束的生成有抑制作用。吐温-20胶束化热力学研究表明,吐温-20在不同浓度离子液体中的胶束化是熵、焓共同驱动,并具有熵-焓补偿性。随着离子液体浓度的增加,吐温-20胶束平均粒径和胶束微粘性均表现出先增大后减小的变化,在cIL=0.05mol·L~(-1)时达到最大值。     

Carbon-based ionogels: tuning the properties of the ionic liquid via carbon-ionic liquid interaction

The behavior of two ionic liquids (ILs), 1-ethyl-3-methylimidazolium dicyanamide [Emim][DCA] and 1-ethyl-3-methylimidazolium triflate [Emim][TfO], in (meso)porous carbonaceous hosts was investigated. Prior to IL incorporation into the host, the carbon matrix was thermally annealed between 180 and 900 °C to control carbon condensation and surface chemistry. The resulting materials have an increasing "graphitic" carbon character with increasing treatment temperature, reflected in a modified behavior of the ILs when impregnated into the carbon host. The two ILs show significant changes in the thermal behavior as measured from differential scanning calorimetry; these changes can be assigned to anion-π interaction between the IL anions and the pore wall surfaces of these flexible carbonaceous support materials.     

Ionic liquid induced changes in the properties of aqueous zwitterionic surfactant solution

Modifying properties of aqueous surfactant solutions by addition of external additives is an important area of research. Unusual properties of ionic liquids (ILs) make them ideal candidates for this purpose. Changes in important physicochemical properties of aqueous zwitterionic N-dodecyl- N, N-dimethyl-3-ammonio-1-propanesulfonate (SB-12) surfactant solution upon addition of hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF 4], are reported. Dynamic light scattering results indicate a dramatic reduction in the average micellar size in the presence of [bmim][BF 4]; micellar (or micelle-like) aggregation in the presence of as high as 30 wt % [bmim][BF 4] is confirmed. Responses from fluorescence probes are used to obtain critical micelle concentration (cmc), aggregation number ( N agg), and dipolarity and microfluidity of the micellar pseudophase of aqueous SB-12 in the presence of [bmim][BF 4]. In general, increasing the amount of [bmim][BF 4] to 30 wt % results in decrease in N agg and increase in cmc. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the micellar pseudophase is observed on increasing [bmim][BF 4] concentration in the solution. It is attributed to increased water penetration into the micellar pseudophase as [bmim][BF 4] is added to aqueous SB-12. It is proposed that IL [bmim][BF 4] behaves similar to an electrolyte and/or a cosurfactant when present at low concentrations and as a polar cosolvent when present at high concentrations. Electrostatic attraction between cation of IL and anion of zwitterion, and anion of IL and cation of zwitterion at low concentrations of [bmim][BF 4] is evoked to explain the observed changes. Presence of IL as cosolvent appears to reduce the efficiency of micellization process by reducing the hydrophobic effect.     

Effect of the structure of imidazolium cations in [BF4](-)-type ionic liquids on direct electrochemistry and electrocatalysis of horseradish peroxidase in Nafion films

The direct electrochemistry and bioelectrocatalysis of horseradish peroxidase (HRP) in Nafion films at glassy carbon electrode (GCE) was investigated in three [BF(4)](-)-type room-temperature ionic liquids (ILs) to understand the structural effect of imidazolium cations. The three ILs are 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim][BF(4)]), 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]) and 1-hexyl-3-methylimidazolium tetrafluoroborate ([Hmim][BF(4)]). A small amount of water in the three ILs is indispensable for maintaining the electrochemical activity of HRP in Nafion films, and the optimum water contents decrease with the increase of alkyl chain length on imidazole ring. Analysis shows that the optimum water contents are primarily determined by the hydrophilicity of ILs used. In contrast to aqueous medium, ILs media facilitate the direct electron transfer of HRP, and the electrochemical parameters obtained in different ILs are obviously related to the nature of ILs. The direct electron transfer between HRP and GCE is a surface-confined quasi-reversible single electron transfer process. The apparent heterogeneous electron transfer rate constant decreases gradually with the increase of alkyl chain length on imidazole ring, but the changing extent is relatively small. The electrocatalytic reduction current of H(2)O(2) at the present electrode decreases obviously with the increase of alkyl chain length, and the mass transfer of H(2)O(2) via diffusion in ILs should be responsible for the change. In addition, the modified electrode has good stability and reproducibility; the ability to tolerate high levels of F(-) has been greatly enhanced due to the use of Nafion film. When an appropriate mediator is included in the sensing layer, a sensitive nonaqueous biosensor could be fabricated.