Estimation of effective Debye temperature from sound velocity of N-(p-n-alkoxybenzylidene)-p-n-alkylanilines, (nO.m) liquid crystalline compounds

The ratio of specific heats (γ), Poisson's ratio (σ), effective Debye temperature (θ_D) collision factor (S_m), etc., are estimated in different LC phases of N-(p-n-alkoxybenzylidene)-p-n-alkylanilines, (nO.m's) liquid crystalline compounds using the density and sound velocity data. The variation of these parameters in different mesomorphic phases with the chain length is studied. The effective Debye temperature (θ_D), the collision factor (S_m) exhibits a similar variation with the alkyl chain length. Further, the space filling factor (r_fm) estimated using Kittel's formula is constant for all the materials irrespective of the phase with a value of 0.416. The molecular radius shows an increment of 0.074, 0.072 and 0.068 ? per CH₂ group in isotropic, nematic and smectic-A phases respectively in 5O.m series. Further, the specific heat ratio (γ) value is found to be lower in isotropic phase than in liquid crystalline phases. The data is compared with the body of the data in the literature.     

Estimation of anharmonic parameters, molecular radius, Mr and Beyer's non-linearity parameter, B/A in TBnA series

The thermodynamic parameters like Moelwyn-Hughes parameter (C₁), reduced molar volume (V^~), isochoric temperature coefficient of internal pressure (X), Huggin's parameter (F), Gruneisen parameter (Γ_p), isothermal microscopic Gruneisen parameter, Sharma parameter (S_o), fraction free volume (f) and (A^?) a dimensionless thermal parameter, etc and the Beyer's nonlinearity parameter (B/A) were deduced employing the thermal expansion coefficient derived from density data for the homologues series of compounds terephthalyidene-bis-p-n-alkyl anilines, TBnA with n = 5 to 10,12,14,16 and 18. Further, it is found that the variation of molecular radius, M_r increases with the increase of alkyl chain number, with a core radius of 4.78 Å and the increment for methylene unit is 0.086 Å . The results were discussed with the body of the data available.     

Dielectric relaxation study of poly(ethylene glycols) using TDR technique

Temperature dependent dielectric relaxation and thermodynamic properties of polyethylene glycols HO[CH₂CH₂O)_nH with number average molecular weight 200 (n = 4), 300 (n = 7), 400 (n = 9) and 600 (n = 14) g mol^− 1 have been studied using Time Domain Reflectometry (TDR) in the frequency range 10 MHz to 20 GHz. The frequency dependence of the complex dielectric permittivity is analyzed by the Havriliak-Negami expression. The static permittivity ε₀, high frequency limiting static permittivity ε_∞, average relaxation time τ₀ and thermodynamic energy parameters such as free energy, enthalpy of activation and entropy of activation have been determined. The average free energy of activation ΔF_τ for PEG molecules was found to be in the range 4-5 kcal mol^− 1. The values of entropy ΔS_τ for PEG-200, PEG-400 and PEG-600 molecules were found to be positive while entropy ΔS_τ for PEG-300 molecules was found negative, which confirms that the configuration of PEG-300 involved in the dipolar orientation has an activated state, which is more ordered than the normal state compared to PEG-200, PEG-400 and PEG-600 molecules.     

Velocity modulation spectroscopy of molecular ions II: The millimeter/submillimeter-wave spectrum of TiF (XΦr)

The pure rotational spectrum of the molecular ion TiF⁺ in its ³Φ_r ground state has been measured in the range 327-542 GHz using millimeter-wave direct absorption techniques combined with velocity modulation spectroscopy. TiF⁺ was made in an AC discharge from a mixture of TiCl₄, F₂ in He, and argon. Ten transitions of this ion were recorded. In every transition, fluorine hyperfine interactions, as well as the fine structure splittings, were resolved. The fine structure pattern was found to be regular with almost equal spacing in frequency between the three spin components, in contrast to TiCl⁺, which is perturbed in the ground state. The data were fit with a case (a) Hamiltonian and rotational, fine structure, and hyperfine constants were determined. The bond length established for TiF⁺, r₀ = 1.7775 Å, was found to be shorter than that of TiF, r₀ = 1.8342 Å—also established from mm-wave data. The hyperfine parameters determined are consistent with a δ¹π¹ electron configuration with the electrons primarily located on the titanium nucleus. The nuclear spin-orbit constant a indicates that the unpaired electrons are closer to the fluorine nucleus in TiF⁺ relative to TiF, as expected with the decrease in bond length for the ion. The shorter bond distance is thought to arise from increased charge on the titanium nucleus as a result of a Ti²⁺F⁻ configuration. A similar decrease in bond length was found for TiCl⁺ relative to TiCl.     

Microwave spectra, molecular structure and theoretical calculation of two isotopic species of acetyl isocyanate CD3C(O)NCO and CH3C(O)NCO

The microwave spectra of two isotopic species of acetyl isocyanate, ¹³CH₃C(O)NCO and CD₃C(O)NCO, were observed in order to determine the r_o structure and confirmation of the molecular conformation. These isotopic species were prepared by reacting acetyl-2-¹³C-chloride or acetyl-d₃ chloride with sliver cyanate. The rotational spectra of A-level in 26.5-60.0 GHz region have been observed by Stark-modulated microwave spectrometer. Some absorption lines in E-level were observed in ¹³CH₃C(O)NCO. The rotational constants in the ground vibrational state were determined to be A = 10654.8(18), B = 2177.32(2), and C = 1827.65(2) MHz for ¹³CH₃C(O)NCO, and A = 9713.90(6), B = 2042.04(2), and C = 1722.78(2) MHz for CD₃C(O)NCO, respectively. The values of ΔI (= I_c − I_a − I_b) of the ¹³C species (−3.024(13) uŲ) and the d₃ species (−6.163(3) uŲ) indicate that the molecule has C_s symmetry. The r_s coordinates of the carbon atom in the methyl group were determined to be |a| = 2.183(3), |b| = 0.706(9), and |c| = 0.080(87) Å. The determined coordinates were in agreement with those calculated for the cis form, in which the carbonyl group is eclipsed by the NCO group. The six structural parameters of the cis form were adjusted by fitting to the observed rotational constants. The observed rotational constants of the cis form were in better agreement with those calculated using the QCISD/6-31G (d, p) level rather than those calculated using the MP2/6-31G (d, p) level. The barrier of internal rotation of the methyl group was determined as 4.283(16) kJ mol⁻¹ in ¹³CH₃C(O)NCO. The structural tendencies and the relationship between ∠RNC and ¹⁴N quadrupole coupling constants (χ_cc) were discussed.     

Ion transport pathways in molecular dynamics simulated alkali silicate glassy electrolytes

The xM₂O-(1 − x)SiO₂ (M = Li, Na, and K, and 0.1 ≤ x ≤ 0.5) glass systems have been studied by constant volume molecular dynamics (MD) simulations. The bond valence (BV) method is applied to the equilibrated configurations to analyse the structural variation in these glass systems with increasing network modifier content, its consequence for M⁺ ion mobility, as well as the distribution of bridging and non-bridging oxygen atoms and the variation of the Q_i values. The contribution of non-bridging oxygen atoms to the BV sums exhibits a transition around x = 1/3 for Li₂O and Na₂O doped glasses. The observed Q_i variation is consistent with a bond order model. Despite slight deviations of the interatomic distances in the MD-simulated glasses, their BV analysis reveals characteristic features of the ion transport pathway. For complex disordered systems with low ion mobilities the bond valence analysis of the pathway characteristics for the mobile ion is thus a viable method to extract ion transport properties even if the mobilities are too low to be directly analysed from the mean square displacements over the simulated period.     

A surface tension study of liquid threads

According to symmetry of liquid threads, definitions of surface tension in axial direction and angular direction are given. The formulas of surface tension in axial direction γ_z and surface tension in angular direction γ_θ are derived. A scheme to calculate Δγ = γ_z − γ_θ is designed. We investigate seven different systems (the numbers of molecules N are 1600, 2240, 2880,3360,4000,4800 and 5280) by molecular dynamics simulations. For liquid threads, Δγ increases with the decreasing radius of dividing surface. It shows that there exists surface tension anisotropy for liquid threads. The results obtained by molecular dynamics simulations support that surface tension is dependent on the dividing surface curvature.     

Electron surface states in short-period superlattices: (GaAs)2/(AlAs)2(1 0 0)-c(4 × 4)

The electronic structure of (GaAs)₂/(AlAs)₂(1 0 0)-c(4 × 4) superlattice surfaces was studied by means of angular-resolved photoelectron spectroscopy (ARUPS) in the photon energy range 20-38 eV. Four samples with different surface termination layers were grown and As-capped by molecular beam epitaxy (MBE). ARUPS measurements were performed on decapped samples with perfect c(4 × 4) reconstructed surfaces. An intensive surface state was, for the first time, observed below the top of the valence band. This surface state was found to shift with superlattices’ different surface termination in agreement with theoretical predictions.     

Nanoscratch study of Zn1−xMnxO heteroepitaxial layers

We investigated the nanotribological properties of Zn_1−xMn_xO epilayers (0 ≤ x ≤ 0.16) grown by molecular beam epitaxy (MBE) on sapphire substrates. The surface roughness and friction coefficient (μ) were analyzed by means of atomic force microscopy (AFM) and hysitron triboscope nanoindenter techniques.The nanoscratch system gave the μ value of the films ranging from 0.17 to 0.07 and the penetration depth value ranging 294-200 nm when the Mn content was increased from x = 0 to 0.16. The results strongly indicate that the scratch wear depth under constant load shows that higher Mn content leads to Zn_1−xMn_xO epilayers with higher shear resistance, which enhances the Mn-O bond. These findings reveal that the role of Mn content on the growth of Zn_1−xMn_xO epilayers can be identified by their nanotribological behavior.     

Magnetic properties and EPR spectra of [Cu(L-arginine)2](NO3)2·3H2O

Magnetic and EPR data have been collected for complex [Cu(L-Arg)₂](NO₃)₂·3H₂O (Arg=arginine). Magnetic susceptibility χ in the temperature range 2-160 K, and a magnetization isotherm at T=2.29(1) K with magnetic fields between 0 and 9 T were measured. The observed variation of χT with T indicates predominant antiferromagnetic interactions between Cu(II) ions coupled in 1D chains along the b axis. Fitting a molecular field model to the susceptibility data allows to evaluate g=2.10(1) for the average g-factor and J=−0.42(6) cm⁻¹ for the nearest neighbor exchange coupling (defined as H_ex=-∑J_ijS_i·S_j). This coupling is assigned to syn-anti equatorial-apical carboxylate bridges connecting Cu(II) ion neighbors at 5.682 Å, with a total bond length of 6.989 Å and is consistent with the magnetization isotherm results. It is discussed and compared with couplings observed in other compounds with similar exchange bridges. EPR spectra at 9.77 were obtained in powder samples and at 9.77 and at 34.1 GHz in the three orthogonal planes of single crystals. At both microwave frequencies, and for all magnetic field orientations a single signal arising from the collapse due to exchange interaction of resonances corresponding to two rotated Cu(II) sites is observed. From the EPR results the molecular g-tensors corresponding to the two copper sites in the unit cell were evaluated, allowing an estimated lower limit |J |>0.1 cm⁻¹ for the exchange interaction between Cu(II) neighbors, consistent with the magnetic measurements. The observed angular variation of the line width is attributed to dipolar coupling between Cu(II) ions in the lattice.     

Synthesis of goethite from Fe(OH)2 precipitates: Influence of Fe(II) concentration and stirring speed

Magnetic methods are efficient tools in soil and environmental science. But in such natural environments, several magnetic minerals are generally present. So, synthetic standard samples are necessary for calibration of laboratory techniques. The aim of this study was to synthesise goethite free of magnetic impurities (concentration <∼1 μg kg⁻¹) with different crystal sizes. Goethite was prepared by oxidation of aqueous suspensions of Fe(OH)₂ precipitates. Final products were characterised by X-ray diffraction, infrared spectroscopy, scanning and transmission electron microscopy and magnetic methods. Goethite could be obtained in the absence of any trace of strong magnetic minerals using FeSO₄·7H₂O and NaOH as reactants with the following experimental conditions: temperature=45 °C, [FeSO₄·7H₂O]=0.50 mol L⁻¹, [NaOH]=0.20 mol L⁻¹, stirring speed=760 rpm. The Fe(II) concentration and the stirring speed were varied. It proved possible to modify the size of the goethite crystals by varying the Fe(II) concentration and the stirring speed, but important changes of these parameters induced the formation of other phases, lepidocrocite when the oxidation reaction was drastically accelerated and Fe₃O₄ when the reaction was slowed down. In any case, for weak magnetic fields, a low-coercivity magnetic mineral saturating at weak magnetic fields was observed. It may correspond to traces of δ-FeOOH or to domains structurally similar to δ-FeOOH inside the multidomainic crystals of δ-FeOOH.     

Heat capacities of the electron acceptor 7,7,8,8-tetracyano- quinodimethane (TCNQ) and its radical-ion salt NH4(TCNQ) showing spin-Peierls transition

Heat capacities of the electron acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and its radical-ion salt NH₄-TCNQ have been measured at temperatures in the 12-350 K range by adiabatic calorimetry. A λ-type heat capacity anomaly arising from a spin-Peierls (SP) transition was found at 301.3 K in NH₄-TCNQ. The enthalpy and entropy of transition are Δ_trsH=(667±7) J mol⁻¹ and Δ_trsS=(2.19±0.02) J K⁻¹ mol⁻¹, respectively. The SP transition is characterized by a cooperative coupling between the spin and the phonon systems. By assuming a uniform one-dimensional antiferromagnetic (AF) Heisenberg chains consisting of quantum spin (S=1/2) in the high-temperature phase and an alternating AF nonuniform chains in the low-temperature phase, we estimated the magnetic contribution to the entropy as Δ_trsS_mag=0.61 J K⁻¹ mol⁻¹ and the lattice contribution as Δ_trsS_lat=1.58 J K⁻¹ mol⁻¹. Although the total magnetic entropy expected for the present compound is R ln 2 (=5.76 J K⁻¹ mol⁻¹), a majority of the magnetic entropy (∼4.6 J K⁻¹ mol⁻¹) persists in the high-temperature phase as a short-range-order effect. The present thermodynamic investigation quantitatively revealed the roles played by the spin and the phonon at the SP transition. Standard thermodynamic functions of both compounds have also been determined.     

Characterization of MeWO4 (Me = Ba, Sr and Ca) nanocrystallines prepared by sonochemical method

Metal tungstates (MeWO₄, Me = Ba, Sr and Ca) were successfully prepared using the corresponding Me(NO₃)₂·2H₂O and Na₂WO₄·2H₂O in ethylene glycol by the 5 h sonochemical process. The tungstate phases with scheelite structure were detected with X-ray diffraction (XRD) and selected area electron diffraction (SAED). Their calculated lattice parameters are in accord with those of the JCPDS cards. Transmission electron microscopy (TEM) revealed the presence of nanoparticles composing the products. Their average sizes are 42.0 ± 10.4, 18.5 ± 5.1 and 13.1 ± 3.3 nm for Me = Ba, Sr and Ca, respectively. Interplanar spaces of the crystals were also characterized with high-resolution TEM (HRTEM). Their crystallographic planes are aligned in systematic array. Six different vibration wavenumbers were detected using Raman spectrometer and are specified as ν₁(A_g), ν₃(B_g), ν₃(E_g), ν₄(B_g), ν₂(A_g) and free rotation. Fourier transform infrared (FTIR) spectra provided the evidence of scheelite structure with W-O anti-symmetric stretching vibration of [WO₄]²⁻ tetrahedrons at 786-883 cm⁻¹. Photoluminescence emission of the products was detected over the range of 384-416 nm.     

Molecular material—{N(n-C4H9)4[Ni(II)0.5 Fe(II)0.5 Fe(III)(C2O4)3]}∞: Magnetic, Mössbauer and electrical conductivity studies

We have attempted to characterize the magnetic and electrical properties of a new mixed-metal molecular material {NBu₄[Ni(II)_0.5Fe(II)_0.5Fe(III)(ox)₃]}_N synthesized by the use of trioxalatoferrate as the building block. Mössbauer spectroscopy was utilized in order to understand local spin structures in this compound. The results indicate that the compound is a semiconducting ferrimagnet with T_N=30 K and room temperature conductivity of 6×10⁻¹⁵ Ω⁻¹ cm⁻¹ along with 1.8 eV activation energy under dark. The compound has no appreciable electrical response towards illumination.     

Facetting and (n × 1) reconstructions of SrTiO3(1 1 0) surfaces

(n × 1) reconstructions and facetting of the (1 1 0) polar surface of SrTiO₃ are studied by means of a combination of shell model and density functional calculations. The polarity compensation can be achieved through the formation of {1 0 0} nano-facets, which play a crucial role in the reconstruction process. The behaviors of various possible terminations (Sr, Ti, and O) are analyzed, as well as their atomic structure and energetics. Their stability in different chemical environments is discussed, with respect to previous formulations and experimental results. The Sr-terminated surface tends to expose large facets, while the TiO and O terminations are marginally stabilized or even destabilized by (n × 1) reconstructions, respectively. Trend to facetting results from a subtle competition between the thermodynamic stability of the ideal non stoichiometric (n × 1) surfaces, and huge atomic relaxations that contribute to the lowering of the surface energy differently for each termination.     

Experimental and theoretical investigation of the pyroelectric effect of the p-n junction in a paraelectric non-polar semiconductor

We describe here the first comprehensive investigation of a pyroelectric response of a p-n junction in a non-polar paraelectric semiconductor. The pyroelectric effect is generated by the, temperature dependent, built-in electrical dipole moment. High quality PbTe p-n junctions have been prepared specifically for this experiment. The pyroelectric effect was excited by a continuous CO₂ laser beam, modulated by a mechanical chopper. The shape and amplitude of the periodic and single-pulse pyroelectric signals were studied as a function of temperature (10-130 K), reverse bias voltage (up to −500 mV) and chopping frequency (4-2000 Hz). The pyroelectric coefficient is ≈10⁻³ μC/cm²K in the temperature region 40-80 K. The developed theoretical model quantitatively describes all the experimental features of the observed pyroelectric effect. The time evolution of the temperature within the p-n junction was reconstructed.     

Magnetic properties for the Mn2GeTe4 compound

Measurements of magnetic susceptibility χ, in the temperature range from 2 to 300 K, and of magnetization M vs. applied magnetic field B, up to 5 T, at various temperatures were made on polycrystalline samples of the Mn₂GeTe₄ compound. It was found that Mn₂GeTe₄ has a Néel temperature T_N of about 135 K, shows mainly antiferromagnetic behavior with a very weak superimposed ferromagnetic component that is attributed to spin canting. Also, the magnetic results suggest that a possible spin-glass transition takes place at T_f≈45 K. The spin-glass order parameter q(T), determined from the susceptibility data, was found to be in agreement with the prediction of conventional spin-glass theory. The M vs. B results indicated that bound magnetic polarons (BMPs) occur in the compound, and that the effects from BMPs disappear at approximately 80 K. The M vs. B curves were well fitted by a Langevin type of equation, and the variation of the fitting parameters determined as a function of temperature. Using a simple spherical model, the radius of the BMP in the material was found to be about 27 Å; this value is similar to the effective Bohr radius for an acceptor in the II-IV-V₂ and I-III-VI₂ ternary semiconductor compounds.     

Anisotropy and FOMP in Tb3 (Fe28−xCox) V1.0 (x=0, 3 and 6) compounds

In this work, the structural and magnetic properties of Tb₃ (Fe_28−xCo_x) V_1.0 (x=0, 3, 6) compounds have been investigated. The structural characterization of compounds by X-ray powder diffraction is an evidence for a monoclinic Nd₃(Fe, Ti)₂₉-type structure (A2/m space group). The refined lattice parameters a and b (but not c) and the unit cell volume V, obtained from the XRD data by the Rietveld method, are found to decrease with increasing Co concentration. The unit cell parameters behavior has been attributed to the smaller Co atoms and a preferential substitution of Fe by Co. The anisotropy field (H_a) as well as critical field (H_cr) was measured using the singular point detection (SPD) technique from 5 to 300 K in a pulsed magnetic field of up to 30 T. At T=5 K, a FOMP of type 2 was observed for all samples and persists at all temperatures up to 300 K. For sample x=0, H_cr=10.6 and 2.0 T at 5 and 300 K, respectively, is equal to that reported earlier. The occurrence of canting angles between the magnetic sublattices during the magnetization process instead of high-order anisotropy contributions (at room temperature are usually negligible) has been considered to explain the survival of the FOMP at room temperature. The anisotropy and critical fields behave differently for samples with x=0, 3 compared with x=6. The observed behavior has been related to the fact that the Co substitution for Fe takes place with a preferential entrance in the inequivalent crystallographic sites of the 3:29 structure. The contribution of the Tb-sublattice in the Tb₃(Fe, V)₂₉ compound with uniaxial anisotropy has been scaled from the anisotropy field measured on a Y₃(Fe, V)₂₉ single crystal with easy plane anisotropy.     

Phase stability,elastic, electronic,thermal and optical properties of Ti3Al1−xSixC2 (0≤x≤1): First principle study

The structural parameters with stability upon Si incorporation and elastic, electronic, thermodynamic and optical properties of Ti₃Al_1−xSi_xC₂ (0≤x≤1) are investigated systematically by the plane wave pseudopotential method based on the density functional theory (DFT). The increase of some elastic parameters with increasing Si-content renders the alloys to possess higher compressive and tensile strength. The Vickers hardness value obtained with the help of Mulliken population analysis increases as x is increased from 0 to 1. The solid solutions considered are all metallic with valence and conduction bands, which have a mainly Ti 3d character, crossing the Fermi level. The temperature and pressure dependences of bulk modulus, normalized volume, specific heats, thermal expansion coefficient, and Debye temperature are all obtained through the quasi-harmonic Debye model with phononic effects for T=0−1000 K and P=0−50 GPa. The obtained results are compared with other results available. Further an analysis of optical functions for two polarization vectors reveals that the reflectivity is high in the visible–ultraviolet region up to ∼10.5 eV region showing promise as a good coating material.